ALV field catalog not found
Hello there,
I am having problem changing a classic ABAP report to ALV as am hitting the error "field catalog not found".
I am using this 2 functions to help me convert it to ALV format.
and a snippet from my code :
MODIFY gt_i_data FROM wa_i_data TRANSPORTING priokx.
ENDLOOP .
gt_report[] = gt_i_data[].
perform f_assign_alv.
perform f_display_alv.
1.f_assign_alv
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = c_repid
i_internal_tabname = 'GT_REPORT'
i_inclname = c_repid
CHANGING
ct_fieldcat = gt_fieldcat.
2._display_alv.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = v_grid_title
is_layout = v_layout
it_fieldcat = gt_fieldcat
TABLES
t_outtab = GT_REPORT
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I noticed during debug,inside 'REUSE_ALV_GRID_DISPLAY' the possible location of error cud be at :
if i_screen_start_column is initial and -
>all these values are empty
i_screen_start_line is initial and
i_screen_start_column is initial and
i_screen_end_line is initial.
gt_grid-flg_popup = space.
call screen 500. else. -
>point of error
gt_grid-flg_popup = 'X'.
call screen 700
starting at i_screen_start_column i_screen_start_line
ending at i_screen_end_column i_screen_end_line.
endif.
Need your expert advice, please guide.Thanks so much!!
Hi Neesha,
If you are using FM 'REUSE_ALV_FIELDCATALOG_MERGE', during data/types declaration, you have to use the LIKE keyword and not the TYPE keyword.
If you use TYPE, the fieldcat will not be populated.
DATA: BEGIN OF GT_REPORT OCCURS 0,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
matnr LIKE ekpo-matnr,
werks LIKE ekpo-werks,
menge LIKE ekpo-menge,
netpr LIKE ekpo-netpr,
peinh LIKE ekpo-peinh,
netwr LIKE ekpo-netwr,
END OF GT_REPORT.
Regards,
Jovito.
Edited by: dsouzajovito on Jan 10, 2011 11:32 AM
Similar Messages
-
Field Catalog Not Found in ALV
Hi Experts,
I am trying to exceute the below code its shows the Field CataLog Not Found
Code is:
TYPE-POOLS:slis.
TABLES:ekpo,mseg.
TYPES: BEGIN OF ty_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
END OF ty_ekpo.
TYPES: BEGIN OF ty_mseg,
ebeln TYPE mseg-ebeln,
ebelp TYPE mseg-ebelp,
matnr TYPE mseg-matnr,
menge TYPE mseg-menge,
bwart TYPE mseg-bwart,
END OF ty_mseg.
TYPES: BEGIN OF ty_final,
ebeln TYPE ebeln,
ebelp TYPE ebelp,
qtysup TYPE MENGE_D,
qtyact TYPE MENGE_D,
qtyrej TYPE MENGE_D,
END OF ty_final.
DATA: it_mseg TYPE TABLE OF ty_mseg WITH HEADER LINE,
it_ekpo TYPE TABLE OF ty_ekpo WITH HEADER LINE,
it_final TYPE TABLE OF ty_final WITH HEADER LINE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv,
it_fieldcat TYPE slis_t_fieldcat_alv.
DATA:wa_mseg LIKE LINE OF it_mseg,
wa_ekpo LIKE LINE OF it_ekpo ,
wa_final LIKE LINE OF it_final.
SELECT-OPTIONS: p_ebeln FOR ekpo-ebeln.
START-OF-SELECTION.
SELECT ebeln ebelp matnr menge FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln IN p_ebeln.
IF it_ekpo[] IS NOT INITIAL.
SELECT ebeln ebelp matnr menge bwart FROM mseg
INTO TABLE it_mseg
FOR ALL ENTRIES IN it_ekpo[]
WHERE ebeln EQ it_ekpo-ebeln
AND ebelp EQ it_ekpo-ebelp
AND bwart EQ '122'.
ENDIF.
LOOP AT it_mseg .
READ TABLE it_ekpo WITH KEY ebeln = it_mseg-ebeln.
IF sy-subrc EQ 0.
it_final-qtyrej = it_mseg-menge.
it_final-qtysup = it_ekpo-menge.
it_final-ebeln = it_mseg-ebeln.
it_final-ebelp = it_mseg-ebelp.
ENDIF.
IF sy-subrc EQ 0.
it_final-qtyact = ( it_final-qtysup ) - ( it_final-qtyrej ).
ENDIF.
APPEND it_final.
ENDLOOP.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Purchase Doc'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 1.
wa_fieldcat-outputlen = 10.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Item'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 2.
wa_fieldcat-outputlen = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYSUP'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QuatitySupply'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 3.
wa_fieldcat-outputlen = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYACT'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityAccepted'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 4.
wa_fieldcat-outputlen = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYREJ'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityRejected'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 5.
wa_fieldcat-outputlen = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
TABLES
t_outtab = it_final[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks In Advance
PoornaHi,
pass parametrs as it is given below...
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = it_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_final[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Ashu -
"Field Catalog not found" ...problem in ALV reporting !!
Hi,
When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
"Field Catalog not found"...
The elabore message is
"Field Catalog cannot be determined becaus the output table structure name was not specified"
Where am I wrong ??
Find below my code ...
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
lgpla LIKE mseg-lgpla,
bwart LIKE mseg-bwart,
menge LIKE mseg-menge,
dmbtr LIKE mseg-dmbtr,
budat LIKE mkpf-budat,
txjcd LIKE zmigo_extend-txjcd,
END OF migo_data.
DATA: it_cat TYPE slis_t_fieldcat_alv,
wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
so_budat FOR mkpf-budat,
so_werks FOR mseg-werks,
so_lgpla FOR mseg-lgpla,
so_bwart FOR mseg-bwart,
so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT amatnr awerks algpla abwart
amenge admbtr bbudat ctxjcd INTO TABLE
migo_data
FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
zmigo_extend AS c ON amblnr = cmblnr
WHERE a~matnr IN so_matnr
AND b~budat IN so_budat
AND a~werks IN so_werks
AND a~lgpla IN so_lgpla
AND a~bwart IN so_bwart
AND c~txjcd IN so_txjcd.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-cprog
i_internal_tabname = 'migo_data'
i_inclname = sy-cprog
CHANGING
ct_fieldcat = it_cat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = 'MIGO report with Tax Jurisdiction Code'
is_layout = wa_lay
it_fieldcat = it_cat
TABLES
t_outtab = migo_data
EXCEPTIONS
program_error = 1
OTHERS = 2.Give 'migo_data' in uppercase as ''MIGO_DATA'.
-
Error ,Field catalog not found while doing billing with DP90
Dear Guru's
while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
Thank u
S Babuhi naga suribabu,
I am also facing same issue. can you please help, where to check the configuration for this issue -
Field catalog not found...
hi all,
when i try to create billing request for a service order (using dp90), i am getting the following message :
Field catalog not found
Message no. 0K530
Diagnosis
The field catalog cannot be determined because the output table
structure name was not specified.
what can i do?I assume this error happens when you save the billing document, and it is a billing output issue. As said, you could verify this by removing all outputs before saving, and afterwards in change mode add them again one by one to figure out which is failing. Alternatively use the blue i icon to analyze the outputs.
Transaction NACE can be used for output setup across all modules. If the assumption regarding billing is correct, we are dealing with application V3. Mark this in the left side. Press 'output types' button and check the output types you saw in the billing document by double clicking. On the 'General data' is the access sequence assigned. Double click that. Probably will multiple output types be attached to the same access sequence. Mark the access sequence, and unfold the 'Accesses' to the left. Check out the condition tables in the Tab column. All condition tables below 599 is standard and probably OK. Note down the high numbers.
Go back to the initial screen of NACE. With the application (V3) marked, select EDIT - CONDITION TABLES in the menu.
Check each of the used condition tables here. Use utilities - Generate in the menu. Mark all boxes and execute. You can even select the entire range 500-999 at one time if you prefer. At least one condition table should give errors in the generation. -
Sap upgrade-Error when using DP90-OK 530-field catalog not found
Hello,
We are upgrading from 4.6c to mySAP ERP 2004 version. In 4.6c, we are using VA90 to create a sales order from service order to bill the customer. However in mySAP ERP 2004 version, VA90 does not exist. So we created DP profile and are using transaction code DP90 to create billling request for the service order. However, System gives an error 'Field catalog not found'. The diagnosis says that -The field catalog cannot be determined because the output table structure name was not specified.
Please help us how to solve the above problem.
Thanks
Malahi mala,
did you see SAP-message 442170?
it is all about conversion VA90/DP90.
hope this helps.
br,
matthias
Message was edited by: Matthias Leitner -
'Field Catalog not Found' - ALV Grid using CustomContainer+Fcat
The Following piece of code throws 'Field Catalgo not found'
Please give me necessary changes in the code.
Thanks & Regards
Harsha Ch.
*& Report ZCHK_ALV_CUSCONT1 *
REPORT zchk_alv_cuscont1 .
DATA itab LIKE STANDARD TABLE OF mara WITH HEADER LINE.
SELECT matnr meins mbrsh FROM mara INTO CORRESPONDING FIELDS OF TABLE itab UP TO 10 ROWS.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA fcat1 TYPE lvc_t_fcat WITH HEADER LINE.
DATA fcat TYPE STANDARD TABLE OF lvc_s_fcat.
DATA: c1 TYPE REF TO cl_gui_custom_container.
DATA: a1 TYPE REF TO cl_gui_alv_grid.
CREATE OBJECT c1 EXPORTING container_name = 'CC_ALV'.
CREATE OBJECT a1 EXPORTING i_parent = c1.
PERFORM populate_fcat.
PERFORM generate_grid.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form POPULATE_FCAT
text
--> p1 text
<-- p2 text
FORM populate_fcat .
fcat1-reptext = 'MATNR'.
fcat1-fieldname = 'MATNR'.
fcat1-col_pos = '1'.
APPEND fcat1.
CLEAR fcat1.
fcat1-reptext = 'MEINS'.
fcat1-fieldname = 'MEINS'.
fcat1-col_pos = '2'.
APPEND fcat1.
CLEAR fcat1.
fcat1-reptext = 'MBRSH'.
fcat1-fieldname = 'MBRSH'.
fcat1-col_pos = '3'.
APPEND fcat1.
CLEAR fcat1.
ENDFORM. " POPULATE_FCAT
*& Form GENERATE_GRID
text
--> p1 text
<-- p2 text
FORM generate_grid .
CALL METHOD a1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = 'MARA'
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = itab[]
IT_FIELDCATALOG = fcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GENERATE_GRIDHi
This works fine:
*& Report ZCHK_ALV_CUSCONT1 *
DATA ITAB LIKE STANDARD TABLE OF MARA WITH HEADER LINE.
DATA FCAT1 TYPE LVC_T_FCAT WITH HEADER LINE.
DATA FCAT TYPE STANDARD TABLE OF LVC_S_FCAT.
DATA: C1 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: A1 TYPE REF TO CL_GUI_ALV_GRID.
START-OF-SELECTION.
SELECT MATNR MEINS MBRSH FROM MARA INTO CORRESPONDING FIELDS OF TABLE
ITAB UP TO 10 ROWS.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* TEXT
MODULE STATUS_0100 OUTPUT.
* PERFORM POPULATE_FCAT.
PERFORM GENERATE_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
* FORM POPULATE_FCAT *
FORM POPULATE_FCAT .
FCAT1-REPTEXT = 'MATNR'.
FCAT1-FIELDNAME = 'MATNR'.
FCAT1-COL_POS = '1'.
APPEND FCAT1.
CLEAR FCAT1.
FCAT1-REPTEXT = 'MEINS'.
FCAT1-FIELDNAME = 'MEINS'.
FCAT1-COL_POS = '2'.
APPEND FCAT1.
CLEAR FCAT1.
FCAT1-REPTEXT = 'MBRSH'.
FCAT1-FIELDNAME = 'MBRSH'.
FCAT1-COL_POS = '3'.
APPEND FCAT1.
CLEAR FCAT1.
ENDFORM. " POPULATE_FCAT
* FORM GENERATE_GRID *
FORM GENERATE_GRID .
CHECK C1 IS INITIAL.
CREATE OBJECT C1 EXPORTING CONTAINER_NAME = 'CC_ALV'.
CREATE OBJECT A1 EXPORTING I_PARENT = C1.
CALL METHOD A1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'MARA'
CHANGING
IT_OUTTAB = ITAB[].
ENDFORM. " GENERATE_GRID
Max -
Error in updating ALV field catalog in selection tool for Planning Book
Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant -
Error in updating ALV field catalog in selection
Dear all,
I'm trying to use the standard transaction /SAPAPO/TSKEYFMAIN in order to check the TS values.
After filling the selection variant, the system shows the following error:
'Error in updating ALV field catalog in selection'
Could you please provide me with further details about the error? What could be the possible solution to avoid it?
Many thanks,
SMHi Marius,
thanks for your answer.
I would like to use the /SAPAPO/TSKEYFMAIN transaction to check massively the values in the time series KFs and not just the consistency of them.
So do you know any other transaction to do it or do you have an idea about the error of /SAPAPO/TSKEYFMAIN?
Thanks for your help!
SM -
Creating Travel Request Error( structure field City_Districtadr not found )
Hi All
While creating travel request from EP, we are encountering the following "error:com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcTreGeneralData.GeneralDataCheck.GeneralDataCheck_Output.GeneralDataCheck_E_General_Data): structure field City_Districtadr not found "
I believe the issue is related to SP levels. Can anyone help resolve this.
Thanks
R KumarHi,
As other said you may need to update software components SAP-HR , EA-HR for this check this
SAP Note 761266 - Self Services Patches
Regards
Vijay
Edited by: Vijay Mohan on Jun 27, 2008 3:11 PM -
Error in ALV : Field Does not exists in Output table .
Hi All,
In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
Error : Field Symbol is not been assigned.
As Instructed i have passed I_INTERFACE_CHECK = 'X'.
By this i am getting detail error that :
Field Distribution channel does not exists in Output table & Heading for List is missing .
But i have maintained the distribition channel in IT_Final table
Please suggest wheather we have to define dis channel in any other place.
Thanks in advance.
Can any one help me regrarding this.
Thanks in advance.Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.] -
Portal Internal Error - structure field Umskd not found
Hi Experts,
I am facing a problem in ESS leave application screen.
The error is:-
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcForm.Orig_Request.Item_to_Check_Orig): structure field Umskd not found
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
... 67 more
My server details are:-
- ESS Business Package: SP13
- J2EE engine: Netweaver 7.0 SP16
- Portal: SP16
- SAP ECC 6.0 EA-HR 600 Level 27
I have search through SDN and I even applied SAP note 1058240 but it is not working too.Hi Prasad,
Sorry for late reply. I will try my best to help you.
First of all, you may apply the note 1058240 to solve your JAVA error. Remember, apply in R/3 server and NOT portal server. Make sure it is imported and then you MUST restart yout portal server. Then everything will be fine. Make sure your EA-HR version is suitable to apply this note.
Then for configuration, the first thing is to change the agent for workflow WS12300111 and all it's task to General Task. I think you had done this. This is good.
Then you must maintain SPRO. Normally I will use the IMG path Personnel Management -> Employee Self-Service -> Service-Specific Setting -> Working Time. In here, you will see all the configuration you can do for ESS Leave Application.
Then you go to Leave Request -> Processing Processes -> Specify Processing Processes for Types of Leave. This is the same thing you do in the IMG path Personnel Time Management - Web Applications - Leave Request - Link Absence Type & Workflow Teplets.
You must maintains this so that the leave type will display on ESS Leave Application. Please remeber that the leave type is base on PSG and if you have a lot of PSG, then you must create all of them in this configuration. Assign the workflow WS12300111 or your own workflow here if the leave type required a workflow.
Above is the important things that need to configure. You may configure others stuffs in the same path Personnel Management -> Employee Self-Service -> Service-Specific Setting -> Working Time.
Regards,
WaiWeng -
ESS Error Structure field Region not found
Hello everyone,
In Netweaver I installed the ESS/MSS and i'm getting the following error, when I go to "Travel and Expenses" -> "Create Travel Plan"
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcTrpPlan.PlanBookAndSave.PlanBookAndSave_I_Address): structure field Region not found
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
... 54 more
Do you have an idea how to solve the problem? Thanks a lot!Hi All
We are also getting a similar error. It seems the error is related to SP Levels. Have you been able to resolve this error. Can you please share the details...Thanks -
Structure field Umskd not found when access team calendar view in MSS.
Hello.
I am keep getting the following error message in my portal when access team calendar view in MSS portal. I am running EP 7.0 with ERP2005 as my back-end system:
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcSelectionList.SelectList.Output.Ex_Request_List): structure field Umskd not found
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
Since I am new to MSS portal, I don't know what infor I am missing. Please advice.
Best regards,
Phuong.Hi Vinod Patil,
I just get the problem solved. I may show you the way and hope it help.
First you should apply the SAP note 1058240 (I am in EA-HR 600 level 27 but we still need to apply) into R/3 server. This note is asking you to patch a .SAR (I have no idea on this file) and you may ask your basis to import it. Make should it is imported and the restart the portal server.
This is what we do to solve the problem. Thanks.
Regards,
WaiWeng -
Configuring Personal Information - structure field Default_Begda not found
Hello,
I am using ECC5 and EP7. I get the below Internal Server error when attempting to view -
Addresses
Bank Information
Personal Data
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcPersInfo.InitPernr.InitPernrOutput.Subtypes): <b>structure field Default_Begda not found</b>
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)Hi,
I am using ECC 5.0 with EP 6.0 SP 19.
HR-Package support pack is 15.
I am also facing the same issue.
Kindly let me know the solution to this problem.
Regards,
Manoj
Maybe you are looking for
-
Where shall i save the jar file when i'm using a parser(JDOM) in jwsdp
I'm using jwsdp These errors are coming when i compile.where shall i save the jdom.jar file? do i have to change the server.xml file in jwsdp-1_0\conf directory ? import org.w3c.dom.*; ^ MetaBuilder.java:4: cannot resolve symbol symbol : class Docume
-
How to create an External Alias for a Portal URL ?
Hi Gurus, Can anybody tell me how to create an external alias for a portal link(URL). Actually, my problem is i want to send this Portal URL(link) thru' a SendMail step to the user so that when he clicks on it, it will take him to his UWL(Ofcourse af
-
Question about Events stored on an external drive
Hello guys! I recently freed up a TON of space on my iMac by adding an external hard drive and you guys advised me on how to get iMovie '08 to store my Events there. Question: I'm going to Rome Italy tomorrow and I'm going to be doing a ton of video
-
I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5
-
Showing error 3194 while updating ios5
how am i update my ipad2 wifi+3g from ios4.3.5 to ios5? while showing error 3194 each time i tried to update.