ALV - Find problem
Hello,
I have problem of find value in alv table.
By choosing some variant I get table with 500 lines and 70 columns. When I use FIND icon of ALV to find specific order number (after selecting the column), the FIND "works" only for first rows and doesn't work for last.
I pay attention that FIND "works" as function of table size.
When table is small find work properly.
Is there some restrictions for find?
Tnanks in advance,
Michal
Do compare your program with demo Program
BCALV_GRID_DEMO ( find function will work normal way and scrolling also)
Good Luck
Thanks
Seshu
Similar Messages
-
With my iMac running, I plugged in a USB drive. When I clicked on finder, I got the message Finder.app can't be opened - 10810. I removed the USB drive. I messed up while in Terminal.app trying to fix Finder problem. Now my terminal screen is blank, just the cursor, but no action after typing a command & clicking enter. Help!
I finally figured out a way to Restart (normal way wasn't working...) & that Restart DID FIX both the Terminal problem AND the Finder problem. So easy, yet so elusive. Thanks so much.
-
Finder problem with 10.4.6
I installed the update today and now my iMac, which I love and has NEVER had a problem has a Finder problem.
When I scroll through files in a Finder window the file names will get "all bunched up" for lack of a better description.
The names of the files will seem to stack on top of each other and it looks messy and it's driving me nuts. Anyone else see this?
Thanks.
PaulGotta love that Dictionary!"I haven't updated yet but it's been reported by everyone."Actually, it's mentioned in the second bullet from the top of Article 303411: About the Mac OS X 10.4.6 Update (delta) and Article 303410: About the Mac OS X 10.4.6 Update (combo) — which I'd read before proceeding. But if they explained why, I missed it. Perhaps so a software engineer can bemusedly observe how many enthusiastic Mac folk would spin on the top of a pin? (Just in case someon'e revising the articles as I write... Thanks, AppleCare!)
Unfortunately, the Apple Installer's abbreviated "Important Information" screen doesn't mention it — so folks who didn't check the KnowledgeBase were caught unaware.
"Maybe it reset your pram?"MJ, have another cup of coffee... I think I muttered the same hypothesis above in saying, " Gotta wonder if it 'zapped PRAM' for me. And what a pleasure to no longer see the faux permissions!...
I guess devious minds think alike...
Cheerfully,
Dean
Did I really just suggest that a New Yorker have another cup o' Joe? Shame on me.
Is that "GRACILE" as in Burns & Allen?
Did I edit this message? I forget; too much coffee, I guess... -
Finder problem or LaCie HD problem
How do I tell whether my external HD (LaCie d2 quadra) used for TM failed or if the trouble is with my Mac (Finder)?
Today I had trouble saving a pages document. The Finder showed the spinning beach ball When I typed the 1st few letter of the destination folder. I checked Activity Monitor & it showed “Finder not responding.” I force quit the finder & discovered I could not restart since no menu bar. I could not access the application folder & I also did not know any keyboard shortcut to bring up terminal so I could not use
“sudo shutdown -r now” or “sudo shutdown -h now”
I gave up & Manually shut down with the On/Off button.
I probably should NOT have force quit Finder! I should have just restarted.
When I booted up again everything worked OK except the LaCie HD icon was missing from the desktop & the TM would not work (since there was no mounted volume for TM). I repaired permissions, I restarted, I shut off & turned on the LaCie HD --no joy.
I am not certain but, suspect that the Finder problem CAUSED the LaCie/unable to mount problem. I just don’t check constantly to verify that the LaCie volume remains mounted. It may have preceded the Finder problem but if so, not by more than a few hours.
The LaCie HD is connected by FW800. I tried to use FW 400 cable & USB cable & same result. The LaCie power light goes on but I don’t hear the HD noises. I don’t know but suspect that the HD must 1st mount before it makes HD noises.
The LaCie is only 16 months old & under warranty. I hate to send it in especially if it is fine & my Mac is the problem.
Under Disk Utility the LaCie is not shown. Under System Profiler/Firewire it shows up as “Unknown Device.”
Is there a way (log?) to find out When the last TM backup completed? Is there a definitive test to tell if It is the Mac software, The Mac Hardware - (doubtful unless FW 800, 400 & USB ports all failed ) , or the LaCie that is the problem?
Thanks,
SteveThanks for the replies.
Pullman,
I looked in Console & did find a backup failed but I had been getting occasional TM backup failed messages for months & usually if I manually backup or just wait , the next one works.
I think that is a TM problem as I checked the forums When it 1st happened.
I did not save the Pages document to LaCie. LaCie is used only for automatic TM backups.
I bought LaCie 11-2007 & used exclusively for TM since. I don’t recall anything about “Mac OS Extended Journaled or GUID partition” but, I followed instructions & it went smoothly & has worked very well so I really doubt I set it up incorrectly.
Thomas, Can you point me to any documentation or even anecdotes about the failure of an external drive causing Finder problems? How can I take your very good suggestion to repair the external (LaCie) disk when Under Disk Utility the LaCie is not shown. Under System Profiler/Firewire it shows up as “Unknown Device.”
When you discuss erasing the drive, you are talking about erasing the External drive, right? But if it is not mounting how can I do anything with it? When you say “If the external disk is connected, turned on and not showing up in Disk Utility, then you've got something more serious going on, probably a hardware failure.” You are referring to a failure of the LaCie hardware not the Mac, right?
Update/ more symptoms:
Keyboard shortcut to switch Spaces stopped working. So did mouse buttons for Expose & Dashboard.. So did Hot corners. Repaired Permissions, no help. Trashed Finder plist, no help. Tried to restart & could not. Had to open Terminal & use “sudo shutdown -r now” & Then it restarted with everything working fine except still no LaCie External TM HD mounting.
Something is wrong with my Mac. Probably the LaCie is just fine.
I will use disk Utility to Repair disk with Leopard DVD. -
Always finding problem "server not find in safari"
Always finding problem "server not find in safari" for any redirection or even opening some sites through google.. Hv to delete cookies an still some times work some times no..pls do not give me ******** answer like apple for restarting wifi..its a serious issue and i think millions of users are finding this problem.. Apple should be forced to fix this issue through an update..or should come out with a or react solution..
It is not a broad issue, I have absolutely no problems using Safari and ios7.1 on many ipads.
Verify that you have good DNS entries, that can be a major cause of this type of message. -
Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.when i double click itunes software,it never responds even with or without iphone 4s connection with my windows 7 laptop.
miraculous...i downloaded quicktime player from apple website and then i run it.upon double click on this quick time player and then i double clicked on itunes...there comes an enry of itunes software...now i am completely enjoying my musics.photos in smart phone.
Thanks a Lot -
Hi.. i am finding problem in transferring .avi file from dektop to itunes
hi.. i am finding problem in transferring .avi file from dektop to itunes
iTunes does not support .AVI files. However, you can use iSquint to convert the file to an Apple-Friendly format (Its free, and really easy to use) http://isquint.en.softonic.com/mac
-
How do I revert back to iOS 8.2? It's not my job to troubleshoot all the issues. I'm tired of finding problems.
creativelauren wrote:
I have the same problem trying to restore a backup from a previous IOS. Is there anyway of doing this and then upgrading to IOS 8.3 once you have done the restore?
You do not have the same problem. It is always possible to restore a backup made with a previous OS to the most recent OS. If you are having a problem restoring a backup from an older version the problem is not related to the fact that you have 8.3 on your device. -
hi,
i have problem in ALV.
my requirement is in a ALV report if i double click on a row it has to take me to another transaction ( say for eg vf03).
how should i do it.
john.hi
good
try this report
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
implement your logic in it and i hope this will definitely work.
thanks
mrutyun -
When using the finder windows sorted either by name or date modifed, when I click a folder arrow, the window reframes to the center (or some other spot) that means I need to scroll back to the folder. When I change an item in a folder when sorted by date modfied, it of course moves to the top, but my window view stays centered where I am, and I have to scroll to the top to find the folder I'm working on. Both situations have the feel of "what I'm working on just dissappeared". I have become used to it, but it is one of the things in Lion that I hate. Is there a workaround...a way to keep the finder window view where it is when I click the open folder arrow, or to reframe to the top if I make a folder change and have the sort set by date modifed?
Mail behaves in the same manner where the view of read and unread wildly scrolls itself when clicking an unread mail. I have tamed this by creating a smart mailbox of unread e-mail, but it seems to be some system wide preference for an unknown sort view that I would like to fix.
Also, when I choose the sort by label option in the finder window, all the red pops to the top, but then all the other labels are scattered and not sorted as a for instance...
Perhaps this is fixed in Mountain Lion?
Thanks for any help.
I am preparing to upgrade to Mountain Lion this weekend, but if I have some system problem, I would like to resolve it before I go forward.
JohnHello Josegued,
Thank you for using Apple Support Communities.
It sounds like you may have a customized keyboard shortcut created. You can take a look at this article to see how to remove it.
OS X Yosemite: Create keyboard shortcuts for apps
Regards,
Jeff D. -
Finder problems in 10.9.5
Hi All
Since installing the 10.9.5 update today I have experienced lots of problems with the finder - it won't allow me to select folders or items, and finder windows won't close or minimize. Everything else seems to be ok but finder being unusable is a big problem. I;m a bit of a novice so all I've tried so far is repairing permissions and rebooting, to no avail. Any advice greatly appreciated.
best, KevinHi. I am having a similar problem. Since updating to 10.9.5 finder does not work. it starts, displays whatever directory it happens to be in, and will display the first directory you click. then it is done. You can't close it, can't display a different directory, and the display window picks up whatever is on top of it (if you happen to open a window over it) and never refreshes. I do use google drive and a 3rd party add on called insync but i've been using them for a long time and only on this update did finder become an issue. Below is the system data fromt eh program mentioned above. thanks.
EtreCheck version: 1.9.15 (52)
Report generated September 25, 2014 at 4:07:43 PM CDT
Hardware Information: ?
MacBook Pro (Retina, 15-inch, Early 2013) (Verified)
MacBook Pro - model: MacBookPro10,1
1 2.7 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
NVIDIA GeForce GT 650M - VRAM: 1024 MB
Color LCD 2880 x 1800
S27D390 spdisplays_1080p
LCD TV spdisplays_1080p
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 6:54:30
Disk Information: ?
APPLE SSD SD512E disk0 : (500.28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.42 GB (421.8 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
PHD 3.0 Silicon-Power 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
Chris Doerfler Back Up Drive (disk1s2) /Volumes/Chris Doerfler Back Up Drive: 999.86 GB (17.63 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Microsoft Natural® Ergonomic Keyboard 4000
Burr-Brown from TI USB audio CODEC
Brother HL-5370DW series
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Elgato Systems Thunderbolt Dock
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.insynchq.insync.daemon.plist Support
[running] com.lobotomo.IPSecuritasDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
iTunesHelper
Google Drive
ScanSnap Manager
Insync
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
SlingPlayer: Version: (null) - SDK 10.8 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% WindowServer
1% Google Chrome
1% fontd
0% coreaudiod
0% coreservicesd
Top Processes by Memory: ?
262 MB WindowServer
164 MB Dock
164 MB com.apple.IconServicesAgent
147 MB Google Chrome
147 MB Mail
Virtual Memory Information: ?
44 MB Free RAM
3.80 GB Active RAM
11.03 GB Inactive RAM
1.12 GB Wired RAM
2.32 GB Page-ins
7 MB Page-outs -
Control or Option Click in Finder Problem
Mouse click plus option Key, or Mouse Click with control key, all Icons on desktop disappear and reappear. Drive Icon moves, and new window appears.
I have reinstalled OS 10.4, ran all updates, problem still exists. Problem does not exist in other login accounts on machine. Only main use account, mine.
Any ideas?If the problem is in your account only, take a look in this folder:
"/Users/yourname/Library/Contextual Menu Items"
Remove anything you find and log out and back in. Generally the Finder quitting when you control click is caused by an incompatible Contextual Menu item. One of the commonest causes is one from StuffIt.
Francine
Francine
Schwieder -
ALV GRID Problem with reading contents
Hi there! I'm quite new with ABAP and I have some problems with the syntax of it. Maybe I should first describe my aim and then I'll show you my code.
1. I read contents from two database tables, called 'zbc_dan_registry' and 'zbc_dan_category'.
'zbc_dan_registry' has 2 columns: name, value.
zbc_dan_category' has 1 column: category.
Now I want to have an ALV Grid, that displays the contents of 'zbc_dan_registry' and one additional column with dropdown fields, where the user can select a category for each row. This is, what my code already does.
Now I want to save the contents of the whole table in a new table 'zbc_dan_registrz' (you see: 'registrz', not 'registry'!) with 3 columns:
name, category, value.
My problem is, how can I read the contents of the ALV Grid, with the user selected category for each row, and save them in an internal table? I've tried to adapt the code of "BCALV_EDIT_04", but I don't get it running.
Some detailled help would be great, you know, I'm really working hard to understand ABAP, but it's really hard for me. Thanks for your support and help!!
Here's my code so far:
*& Report ZBC400_DAN_TESTNO4
REPORT ZBC400_DAN_TESTNO4.
DATA: lt_registrz TYPE TABLE OF zbc_dan_regstrz WITH HEADER LINE,
lt_category TYPE TABLE OF zbc_dan_category WITH HEADER LINE,
ls_category TYPE zbc_dan_category, "Struktur Kategorie
ok_code LIKE sy-ucomm,
container_r TYPE REF TO cl_gui_custom_container,
grid_r TYPE REF TO cl_gui_alv_grid,
gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_REG',
fieldcat_r TYPE lvc_t_fcat,
layout_r TYPE lvc_s_layo,
lt_ddval TYPE lvc_t_drop,
ls_ddval TYPE lvc_s_drop,
c TYPE i.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA g_verifier TYPE REF TO lcl_event_receiver.
DATA: BEGIN OF gt_outtab OCCURS 0.
INCLUDE STRUCTURE zbc_dan_regstrz.
DATA: celltab TYPE lvc_t_styl.
DATA: END OF gt_outtab.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
TYPES: BEGIN OF lt_registrz_key. "Struktur mit den Schlüsseln der Tabelle 'Registry'
TYPES: name TYPE zbc_dan_name,
value TYPE zbc_dan_value,
category TYPE zbc_dan_cat.
TYPES: END OF lt_registrz_key.
TYPES: ls_registrz_keys TYPE STANDARD TABLE OF lt_registrz_key,
ls_registrz_table TYPE STANDARD TABLE OF zbc_dan_regstrz.
METHODS: get_inserted_rows EXPORTING inserted_rows TYPE ls_registrz_keys.
METHODS: refresh_delta_tables.
METHODS: handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
* METHODS: get_inserted_rows EXPORTING inserted_rows TYPE registrz_keys.
* METHODS: refresh_delta_tables.
PRIVATE SECTION.
DATA: inserted_rows TYPE ls_registrz_keys.
DATA: error_in_data TYPE c.
METHODS: get_cell_values IMPORTING row_id TYPE int4 pr_data_changed TYPE REF TO cl_alv_changed_data_protocol EXPORTING key TYPE lt_registrz_key.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
DATA: ls_good TYPE lvc_s_modi,
ls_new TYPE lvc_s_moce.
error_in_data = space.
IF error_in_data = 'X'.
CALL METHOD er_data_changed->display_protocol.
ENDIF.
ENDMETHOD.
METHOD get_cell_values.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'NAME'
IMPORTING e_value = key-name.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'VALUE'
IMPORTING e_value = key-value.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'CATEGORY'
IMPORTING e_value = key-category.
ENDMETHOD.
METHOD get_inserted_rows.
inserted_rows = me->inserted_rows.
ENDMETHOD.
METHOD refresh_delta_tables.
clear me->inserted_rows[].
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
SELECT client name value
INTO CORRESPONDING FIELDS OF TABLE lt_registrz FROM zbc_dan_regstry.
SELECT category INTO CORRESPONDING FIELDS OF TABLE lt_category FROM zbc_dan_category.
CALL SCREEN 0100.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'BACK'.
SET SCREEN 0.
MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
WHEN 'SAVE'.
PERFORM save_data.
WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'DYNPRO100'.
SET TITLEBAR 'D0100'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
*----Creating ALV Grid instance
CREATE OBJECT grid_r
EXPORTING
i_parent = container_r
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
CREATE OBJECT g_verifier.
SET HANDLER g_verifier->handle_data_changed FOR grid_r.
*----Preparing field catalog.
PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
CALL METHOD grid_r->set_table_for_first_display
EXPORTING
* I_BUFFER_ACTIVE =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
is_layout = layout_r
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
CHANGING
it_outtab = lt_registrz[]
it_fieldcatalog = fieldcat_r
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ELSE.
CALL METHOD grid_r->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ENDIF.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZBC_DAN_REGSTR2'
CHANGING
ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
WHEN 'NAME'.
ls_fcat-coltext = 'Name'.
ls_fcat-outputlen = '40'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'VALUE'.
ls_fcat-coltext = 'Wert'.
ls_fcat-outputlen = '30'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'CATEGORY'.
LOOP AT lt_category into ls_category.
ls_ddval-handle = 1.
ls_ddval-value = ls_category-category.
* ls_ddval-style = cl_gui_alv_grid=>mc_style_enabled.
APPEND ls_ddval TO lt_ddval.
ENDLOOP.
CALL METHOD grid_r->set_drop_down_table
EXPORTING it_drop_down = lt_ddval.
ls_fcat-edit = 'X'.
ls_fcat-drdn_hndl = '1'.
ls_fcat-coltext = 'Kategorie'.
MODIFY pt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Kategorie zur Registry hinzufügen'.
ps_layout-smalltitle = 'X'.
ENDFORM.
FORM save_data.
DATA: ls_ins_keys TYPE g_verifier->ls_registrz_keys,
ls_ins_key TYPE g_verifier->lt_registrz_key,
ls_registrz TYPE zbc_dan_regstrz,
ls_outtab LIKE LINE OF gt_outtab,
lt_instab TYPE TABLE OF zbc_dan_regstrz.
CALL METHOD g_verifier->get_inserted_rows IMPORTING inserted_rows = ls_ins_keys.
LOOP AT ls_ins_keys INTO ls_ins_key.
READ TABLE gt_outtab INTO ls_outtab
WITH KEY name = ls_ins_key-name
value = ls_ins_key-value
category = ls_ins_key-category.
IF sy-subrc = 0.
MOVE-CORRESPONDING ls_outtab TO ls_registrz.
APPEND ls_registrz TO lt_instab.
ENDIF.
ENDLOOP.
INSERT zbc_dan_regstrz FROM TABLE lt_instab.
CALL METHOD g_verifier->refresh_delta_tables.
ENDFORM.Hi Hans,
You raised the Question in the Webdynpro ABAP forum. Here its very diffcult to get the answer from this forum. Please close it here and raise the same question in ABAP General Forum there you will get faster and so many anwsers.
Please close the question here.
Warm Regards,
Vijay -
Two visits from engineers can't find problem, BT d...
Would really appreciate any help with this. Problem has been going on a while. Internet speed two mths ago dropped to half a meg. (Am meant to get 11Mb). The problem was 24hrs a day unuseable speed back then.. BT engineers came out about a month ago and changed the router, renewed the wall socket and microfilter, checked everything and replaced equipment at the exchange. Said they couldn't find the fault but just as they were about to give up, speed started coming through. After they left, speed increased to around 7MB but, every night at around 9.30ish, speed dropped to half a Meg again and internet unuseable. Kept a log and this happens every single night between 9.30 and 10pm. BT engineers came out again last Friday and could not find fault. They replaced the line to the Exchange and said everything physical that can be done has been done. It didn't make any difference.
All weekend, speed drops to around half MB and unuseable after 9.30ish. This happens immediately, I can be watching Iplayer and then, bang, no internet. Computer is high performance, about one month old and has been restored to factory settings just in case. There is nothing in the house that turns on or is interfering with the broadband at that time.
There is one master socket in the house which the line is connected to. Old dead sockets upstairs from prev tenants. Line was put in when I moved in. There are no other connections to my line.
And then, tonight, internet speed was down at 6.30pm. Managed to run bt speed test which said:
FAQ
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
52 Kbps
0 Kbps 21000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 52 Kbps
For your connection, the acceptable range of speeds is 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :15928 Kbps(DOWN-STREAM), 1040 Kbps(UP-STREAM)
IP Profile for your line is - 12000 Kbps
2. Upstream Test: -provides background information.
Upload Speed
813 Kbps
0 Kbps 1040 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 813 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1040 Kbps
I could not do third test because the hub won't accept the password which is written on it but its a new hub so I don't think it is the problem.
Engineer said keep ringing the callcentre and calling engineers out again but they don't know whats going on. He said it could be 'rain' on the line from someones faulty equipment but its rare. Worried now the whole thing is going down again because speed dropped so early this evening.. would switching providers solve the problem? but then if its still a BT line, how could it? Seriously tearing my hair out about it all. Call centre want me to check line all the time but as I can't get on the internet when it happens, all a bit pointless. Line has been monitored and no feedback so i assume they think its ok. Please help.sounds like you got the correct thing, I use the plusnet one but any one really does.
Ok if not congested then as IMJOLLY says contact one of the mods
At the top of the forum thare are postings from KellyG, click on the name and in the profile text it says the link to use to contact them. Will take them 3 days to reply probably
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’ -
PowerBook G4 finder problem after 10.4.6 update
Anybody know a fix for this, or have this same problem? After update, when I open a new window in the finder and go to click on app or file, window disappears followed by the finder resetting the desktop.
PowerBook G4 Mac OS X (10.4.6)deeartboy,
Welcome to Apple Discussions.
Find the com.apple.finder.plist file in your ~Library/Preferences folder, drag it to the Desktop and log out/in or restart and let us know what happens.
;~)
Maybe you are looking for
-
I give up! I need help to solve this problem.
Just a heads up you will need coffee. Please this is driving me mad and I cannot solve it I really, really can't! So here it is in a nutshell because I'm done! With trying to solve this by myself because clearly I'm not getting it. So here is my unde
-
Hi Experts, Could you provide me SURVEY RATING TABLE NAME on basis of question and answer ?
-
WRT55AG can't acquire IP address
I have the router serving both wired and wireless network connected to a PPPoE DSL connnection (Verizon). The wired network is working fine and can access the internet. The wireless laptops can't. When trying to connect, they can't acquire a IP addre
-
hi all, when i am trying to save query i got this errors" 1.The query could not be saved due to a problem in transport. 2.BEx transport request '' is not available or not suitable. 3.Choose an existing request . please any one help me this is urgent.
-
Setting margins works with ExportToDisk, but not with ExportToStream...
I'm filling out a report with SetParameterValue, and not with database, and setting the margins with: templateCredencial.ReportDefinition.Sections["DetailSection1"].ReportObjects[elementNumber].Top; templateCredencial.ReportDefinition.Sections["Detai