ALV flickering problem
Hi,
I have flickering problem with ALV control (cl_gui_alv_grid). My alv grid control is not in edit mode.
I am using ALV grid for event planning with drag drop operations, so there may be 1000+ rows sometimes at grid.
Also I call refresh_table_display with soft_refresh and is_stable='XX.'
(I call cfw=>set_new_ok_code to trigger PBO. refresh_table_display is being called at PBO )
It flickers just a second or two after drop_complete but it is critical for usability.
I think flickering happens because of scrolling, so I used set_scroll_via_id but nothing changed.
Thanks.
Hi Manu,
I tried not to trigger PBO (Called refresh_table_display at PAI, commented set_new_ok_code)
It does not help..
(Same behaviour : se38-> BC_ALV_TEST_GRID_PERFORMANCE.Increase record count to 5000.Run.
Scroll to the bottom of list.)
Thank you..
Similar Messages
-
Suggest Solution for this Display Flickering problem ....
Hi, I read the post about calibration and I probably do that a little too often TBH! As I get so little time out the battery and mainly use my MBP on my lap, usually with the power supply near by, it gets charged to full, run to empty to the point of sleep, or sometimes it even cuts out and then is recharged to full again, so I really think it's new battery time. I've seen non Apple Official ones for between £35 and £65 that have 3 year warranties and state they are around 5200mh but am unsure due to reviews.
Later...
Anyway's I have now ordered a non Apple replacement from Amazon for about £35 and it has several good reviews and 4.5 out of 5 stars so I'll see if it works and report back. If it doesn't I'll send it back and get the Official Apple one.
Message was edited by: Missy Steph -
I have an mdi applicaton in Visual studio 2010 (.Net framework 4.0). I'm having a flickering problem when user switch between an MDI Child form. I'm declaring the child form then setting the borderstyle.none at design time and dock property to fill
through programming and make them a MDIChildren before I show them so that it takes up the entire space of the MDI Parent window without being maximized (client request).
i don't want to display control box(minimize, maximize,close) of child form in mdi parent form. (client request)
The problem is that when the child form is being displayed it is briefly shown in it's default size with icon and control box before being resized to fill the available area on the MDI Parent form. When a Child Form loads, you can see it in it's original
size (the size from Design-time) then all this flickering while maximizing .
In other words, child form show up in the client area of the MDIForm, not maximized, with a caption, very shortly, before they are finally filling the client area. there is a short flicker when a new form is created and displayed. This process is most noticeable
with a not-so-powerful PC or there are lots of control inside child form.
below is my code to show child form
MyChild1 c1 = new MyChild1();
c1.MdiParent = MdiMainParent;
c1.Dock = DockStyle.Fill;
c1.Show();
how can i solved the problem of flickering issue?
I tried many options which i have described below
1.double buffering.
2.set style property to child form
this.SetStyle(ControlStyles.UserPaint, true);
this.SetStyle(ControlStyles.AllPaintingInWmPaint, true);
this.SetStyle(ControlStyles.DoubleBuffer, true);
3. override below method in each child form
protected override CreateParams CreateParams
get
CreateParams cp = base.CreateParams;
cp.ExStyle |= 0x02000000;
return cp;
4. override below method in each child form
const int WM_NCPAINT = 0x85;
const int WM_SIZE = 0x05;
protected override void WndProc(ref Message m)
if (m.Msg == WM_NCPAINT)
if (this.WindowState == FormWindowState.Maximized)
return;
if (m.Msg == WM_SIZE)
if (this.WindowState == FormWindowState.Maximized)
return;
base.WndProc(ref m);
but I didn't see any effects. please someone help me to resolve flickering issue. thanks in advance.Hi hardikvaishnav,
This is a known issue which has been reported to Microsoft Connect. Unfortunately, this issue will not fix due to stability issues around MDI. For more details, see
https://connect.microsoft.com/VisualStudio/feedback/details/97787/border-of-mdi-child-form-flashes-up-despite-formborderstyle-none.
You might use a user control or panel instead.
Best Regards,
Bob Wu [MSFT]
MSDN Community Support | Feedback to us -
Flickering problem with Apple TV
I am suddenly having flickering problems after updating Apple TV. The box has worked fine for several months though I did have this same problem when I first got it in February. I have a Panasonic 37' viera. I have unplugged both the TV and the Apple TV box, reset it a number of times. Don't know what to do.
I'm having the same issue, albeit right out of the box. I hooked up my Apple TV according to the instructions, have no other issues with my wifi, and the HDMI and power cables are all securely connected. My TV's also a Samsung, experiecing the same "flickering" of audio. In addition, during set-up, the screen was also flickering to white while inputting my wifi info.
Am hoping swapping it out in store will fix the problem. I was so excited to get my AppleTV in the mail and everything else Apple-to-TV has been working great. (I had my ancient black MacBook -turning 6 in June- hooked up with zero connectivity problems.) Wondering if this will be an ongiong issue? Had decided against AppleCare for such an inexpensive addition to my home, but maybe I should re-think that decision... -
Flickering problem with live viewing with IMAQ Image Display
Hi everyone,
I am trying to write a program to do live imaging with Andor camera. I am using some examples from Andor. The images are acquired in sequence and send into IMAQ Image Display and also Intensity Graph. There is minimal flickering issue in the Intensity Graph but there is very bad flickering problem in IMAQ Image Display. Perhaps I misunderstand how to optimize the vision tools. Does anyone know how to overcome this issue? I have attached the code that I am testing. Thanks in advance.
Best regards,
Han Yen
Solved!
Go to Solution.
Attachments:
iXonRTA_live_0.0.1.vi 70 KBYou can use Vision Assistant to test our vision functions. Vision Assistant is really meant to prototype - it does not have all teh functionality of Vision Development Module and is not as flexible as we don't allow you access to all the settings for every function.
I recommend starting in Vision Assistant and then porting over to LabVIEW or C (whatever you are most comfortable with)...this is built-in functionality. There is nothing wrong with using Vision Assistant to do live imaging, just that you run into limitations and you will only be able to use this code on computers that have Vision Assistant.
Hope this helps.
--Michelle
Instrument Control R&D
National Instruments
Instrument Control
Machine Vision -
Flickering problem on screen - 3000 series N200 laptop
Hello!
I have a 3000 series N200 laptop (0769 type) for 3 years. Approximately 3 months ago, there was a screen problem that the screen had white vertical gridlines. Service replaced the chipset of the graphical card.
Yesterday, a flickering problem has been appeared. I updated bios and display drivers from below link.
http://support.lenovo.com/en_US/downloads/default.page?
Could not get a solve with those updates. Then, I dismounted the front cover of screen. Re-assembled the LVDS FFC cable of the LCD display a couple of times, problem continued. Then, re-assembled the inverter cables. It also did not provide a solution.
>See the problem photo (1.jpg) at below link.
https://docs.google.com/open?id=0BweTh37k3ZRSQWYxRFNIWWpGSFE
Please advise about this matter.
Thanks.Hello suguz and welcome to community,
As you have already updated the video driver and BIOS then you can check with adjusting the monitor refresh rate to 60Hrz.
Kindly check the same issue in BIOS mode and if issue continues then it might fault with Lcd display.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
MSI R9 270X Twin Frozr flickering problem
Hey guys. I have a MSI R9 270X Twin Frozr and i'm having the flickering problems, mentioned already here in several topics.
I'm using Windows 7 64 and AMD Catalyst 13.11 Beta9.5 Driver.
The S/N of my card is: 602-V303-03SB1310018161
I really need your help. Thanks in advanceQuote from: flobelix on 26-December-13, 01:54:04
It's totally easy and welll documented. You'll need the win98boot file to point the tool to or it can't create a dos boot stick.
flobelix can u tell me which version is my vbios?
MSI R9 270x Twin (BIOS 015.041) SN: 602-V303-03SB1310017043
I've flashed it already with 303MS.102 and still get Black Screen when installing drivers! Do you guys have any new info about it? I can't do anything with it. -
hi,
i have problem in ALV.
my requirement is in a ALV report if i double click on a row it has to take me to another transaction ( say for eg vf03).
how should i do it.
john.hi
good
try this report
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
implement your logic in it and i hope this will definitely work.
thanks
mrutyun -
ALV GRID Problem with reading contents
Hi there! I'm quite new with ABAP and I have some problems with the syntax of it. Maybe I should first describe my aim and then I'll show you my code.
1. I read contents from two database tables, called 'zbc_dan_registry' and 'zbc_dan_category'.
'zbc_dan_registry' has 2 columns: name, value.
zbc_dan_category' has 1 column: category.
Now I want to have an ALV Grid, that displays the contents of 'zbc_dan_registry' and one additional column with dropdown fields, where the user can select a category for each row. This is, what my code already does.
Now I want to save the contents of the whole table in a new table 'zbc_dan_registrz' (you see: 'registrz', not 'registry'!) with 3 columns:
name, category, value.
My problem is, how can I read the contents of the ALV Grid, with the user selected category for each row, and save them in an internal table? I've tried to adapt the code of "BCALV_EDIT_04", but I don't get it running.
Some detailled help would be great, you know, I'm really working hard to understand ABAP, but it's really hard for me. Thanks for your support and help!!
Here's my code so far:
*& Report ZBC400_DAN_TESTNO4
REPORT ZBC400_DAN_TESTNO4.
DATA: lt_registrz TYPE TABLE OF zbc_dan_regstrz WITH HEADER LINE,
lt_category TYPE TABLE OF zbc_dan_category WITH HEADER LINE,
ls_category TYPE zbc_dan_category, "Struktur Kategorie
ok_code LIKE sy-ucomm,
container_r TYPE REF TO cl_gui_custom_container,
grid_r TYPE REF TO cl_gui_alv_grid,
gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_REG',
fieldcat_r TYPE lvc_t_fcat,
layout_r TYPE lvc_s_layo,
lt_ddval TYPE lvc_t_drop,
ls_ddval TYPE lvc_s_drop,
c TYPE i.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA g_verifier TYPE REF TO lcl_event_receiver.
DATA: BEGIN OF gt_outtab OCCURS 0.
INCLUDE STRUCTURE zbc_dan_regstrz.
DATA: celltab TYPE lvc_t_styl.
DATA: END OF gt_outtab.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
TYPES: BEGIN OF lt_registrz_key. "Struktur mit den Schlüsseln der Tabelle 'Registry'
TYPES: name TYPE zbc_dan_name,
value TYPE zbc_dan_value,
category TYPE zbc_dan_cat.
TYPES: END OF lt_registrz_key.
TYPES: ls_registrz_keys TYPE STANDARD TABLE OF lt_registrz_key,
ls_registrz_table TYPE STANDARD TABLE OF zbc_dan_regstrz.
METHODS: get_inserted_rows EXPORTING inserted_rows TYPE ls_registrz_keys.
METHODS: refresh_delta_tables.
METHODS: handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
* METHODS: get_inserted_rows EXPORTING inserted_rows TYPE registrz_keys.
* METHODS: refresh_delta_tables.
PRIVATE SECTION.
DATA: inserted_rows TYPE ls_registrz_keys.
DATA: error_in_data TYPE c.
METHODS: get_cell_values IMPORTING row_id TYPE int4 pr_data_changed TYPE REF TO cl_alv_changed_data_protocol EXPORTING key TYPE lt_registrz_key.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
DATA: ls_good TYPE lvc_s_modi,
ls_new TYPE lvc_s_moce.
error_in_data = space.
IF error_in_data = 'X'.
CALL METHOD er_data_changed->display_protocol.
ENDIF.
ENDMETHOD.
METHOD get_cell_values.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'NAME'
IMPORTING e_value = key-name.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'VALUE'
IMPORTING e_value = key-value.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING i_row_id = row_id i_fieldname = 'CATEGORY'
IMPORTING e_value = key-category.
ENDMETHOD.
METHOD get_inserted_rows.
inserted_rows = me->inserted_rows.
ENDMETHOD.
METHOD refresh_delta_tables.
clear me->inserted_rows[].
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
SELECT client name value
INTO CORRESPONDING FIELDS OF TABLE lt_registrz FROM zbc_dan_regstry.
SELECT category INTO CORRESPONDING FIELDS OF TABLE lt_category FROM zbc_dan_category.
CALL SCREEN 0100.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'BACK'.
SET SCREEN 0.
MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
WHEN 'SAVE'.
PERFORM save_data.
WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'DYNPRO100'.
SET TITLEBAR 'D0100'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
*----Creating ALV Grid instance
CREATE OBJECT grid_r
EXPORTING
i_parent = container_r
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
CREATE OBJECT g_verifier.
SET HANDLER g_verifier->handle_data_changed FOR grid_r.
*----Preparing field catalog.
PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
CALL METHOD grid_r->set_table_for_first_display
EXPORTING
* I_BUFFER_ACTIVE =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
is_layout = layout_r
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
CHANGING
it_outtab = lt_registrz[]
it_fieldcatalog = fieldcat_r
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ELSE.
CALL METHOD grid_r->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
ENDIF.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD grid_r->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZBC_DAN_REGSTR2'
CHANGING
ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
WHEN 'NAME'.
ls_fcat-coltext = 'Name'.
ls_fcat-outputlen = '40'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'VALUE'.
ls_fcat-coltext = 'Wert'.
ls_fcat-outputlen = '30'.
MODIFY pt_fieldcat FROM ls_fcat.
WHEN 'CATEGORY'.
LOOP AT lt_category into ls_category.
ls_ddval-handle = 1.
ls_ddval-value = ls_category-category.
* ls_ddval-style = cl_gui_alv_grid=>mc_style_enabled.
APPEND ls_ddval TO lt_ddval.
ENDLOOP.
CALL METHOD grid_r->set_drop_down_table
EXPORTING it_drop_down = lt_ddval.
ls_fcat-edit = 'X'.
ls_fcat-drdn_hndl = '1'.
ls_fcat-coltext = 'Kategorie'.
MODIFY pt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Kategorie zur Registry hinzufügen'.
ps_layout-smalltitle = 'X'.
ENDFORM.
FORM save_data.
DATA: ls_ins_keys TYPE g_verifier->ls_registrz_keys,
ls_ins_key TYPE g_verifier->lt_registrz_key,
ls_registrz TYPE zbc_dan_regstrz,
ls_outtab LIKE LINE OF gt_outtab,
lt_instab TYPE TABLE OF zbc_dan_regstrz.
CALL METHOD g_verifier->get_inserted_rows IMPORTING inserted_rows = ls_ins_keys.
LOOP AT ls_ins_keys INTO ls_ins_key.
READ TABLE gt_outtab INTO ls_outtab
WITH KEY name = ls_ins_key-name
value = ls_ins_key-value
category = ls_ins_key-category.
IF sy-subrc = 0.
MOVE-CORRESPONDING ls_outtab TO ls_registrz.
APPEND ls_registrz TO lt_instab.
ENDIF.
ENDLOOP.
INSERT zbc_dan_regstrz FROM TABLE lt_instab.
CALL METHOD g_verifier->refresh_delta_tables.
ENDFORM.Hi Hans,
You raised the Question in the Webdynpro ABAP forum. Here its very diffcult to get the answer from this forum. Please close it here and raise the same question in ABAP General Forum there you will get faster and so many anwsers.
Please close the question here.
Warm Regards,
Vijay -
Chart flickering problem when updating members of dataProvider
Hi all,
I'm having an issue with a PieChart, where the dataProvider
i'm using is getting updated under the hood and it's causing the
labels to drop in and out. Specifically, it looks like in the
updateDisplayList() method of PieSeries, there's a call to clear
the "labelLayer". I could have sworn i'd seen an example of an
updating pie chart that did not have a problem of flickering
labels, but i can't seem to figure out how to get rid of this
annoyance.
Here is a sample application that demonstrates what i'm
facing. Anyone have any ideas on how to get the labels to stick
around yet display the updated values?
Thanks,
./paul
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute"
width="500" height="300" creationComplete="init()">
<mx:Script>
<![CDATA[
import mx.events.CollectionEventKind;
import mx.events.CollectionEvent;
import flash.utils.getTimer;
import mx.events.PropertyChangeEvent;
import mx.formatters.NumberFormatter;
import mx.collections.ArrayCollection;
private var timer:Timer = new Timer(3000,1);
private var fireUpdate:Boolean = true;
private var ac:ArrayCollection = new ArrayCollection(
[ { "name":"record A", "mydata": 30 },
{ "name":"record B", "mydata": 60 },
{ "name":"record C", "mydata": 70 },
{ "name":"record D", "mydata": 80 },
{ "name":"record E", "mydata": 40 },
{ "name":"record F", "mydata": 90 } ]);
private var percentFormat:NumberFormatter = new
NumberFormatter();
private function init():void
timer.addEventListener( TimerEvent.TIMER, onTimerEvent );
percentFormat.precision = 0;
mychart.dataProvider = ac;
grid.dataProvider = ac;
pieSeries.field = "mydata";
timer.start();
private function onTimerEvent( evt:TimerEvent ):void
for each( var r:Object in ac )
r.mydata = int(((Math.random() * 0.1) + 0.95) *
Number(r.mydata)); // plus or minus 5%
trace( getTimer() + ": " + r.name + " -> " + r.mydata );
if( fireUpdate )
var cevt:CollectionEvent = new CollectionEvent(
CollectionEvent.COLLECTION_CHANGE );
cevt.kind = CollectionEventKind.UPDATE;
ac.dispatchEvent( cevt );
statusLabel.text = "Last Updated: " + getTimer();
timer.reset();
timer.start();
public function labelFunc(data:Object, field:String,
index:Number, percentValue:Number):String
return data.name + " (" + percentFormat.format(percentValue)
+ "%)";
private function toggleUpdateEvent():void
fireUpdate = !fireUpdate;
if( fireUpdate ) evtToggle.label = "Turn Off UpdateEvent";
else evtToggle.label = "Turn ON UpdateEvent"
]]>
</mx:Script>
<mx:VBox width="100%" height="100%" >
<mx:HBox>
<mx:Button id="evtToggle" label="Turn Off UpdateEvent"
click="toggleUpdateEvent()" />
<mx:Label id="statusLabel" />
</mx:HBox>
<mx:HBox width="100%" height="100%">
<mx:PieChart id="mychart" width="50%" height="100%">
<mx:series>
<mx:PieSeries id="pieSeries" labelFunction="labelFunc"
labelPosition="insideWithCallout" showDataEffect="eff"/>
</mx:series>
<mx:SeriesInterpolate id="eff" duration="1000"/>
</mx:PieChart>
<mx:DataGrid id="grid" width="50%" height="100%">
<mx:columns>
<mx:DataGridColumn dataField="name" />
<mx:DataGridColumn dataField="mydata" />
</mx:columns>
</mx:DataGrid>
</mx:HBox>
</mx:VBox>
</mx:Application>Hi
Please select the right Operating system and download the graphic driver and then update the Bios from the link given below and check if the issue is resolved.
Link
Also easy to find out if this is a Hardware issue once unit is powered on keep tapping F10 key and see if the display is the same if yes you might have to replace the screen.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
I love my Macbook. It was perfect until I installed that firmware update...now I have a problem. When I start up the computer, the backlight flickers on and off a few times, then just stays off. I know it's just the backlight and not the screen in general, because I can still see things in it...that is, when I shine a light on it.
Has anyone else had this problem, and is there a way to fix it short of taking it to the Apple Store? And yes, I have reset the PRAM a few times. Didn't do a thing.
15.4" Macbook Pro Mac OS X (10.4.10) Backlight going out...I think my issue is related to yours but mine's different. My screen would go blank when I take a picture and the screen goes white for flash then it just shuts off the brightness. Like you I can still see the screen but you would need a flashlight. Rebooting fixes the issue though.
Ill call Apple for support but I would hate to send it in for repair. I just bought my MBP!
- JOhn -
Every time I play my clip there is Red flickering, everything is rendered.
What are the possible problems?
What are ways to fix this problem?Hi
read another post indicating something wrong with Mac OS X.6.5 or 6
back grading to X.6.4 - seemed to help in their cases
Yours Bengt W -
Flickering problem after re-installation of Premiere
I re-installed Premiere and opened a project file that I edited before the re-installation.
Playing of the movie looked no problem in the Premiere. But when I exported it, the movie
flickered a lot, keeping images going back and forth. I tried in various formats and frame rates,
but every time they came to same results.
Please let me know how to fix the if there are someone who experienced same problem.
Thanks
WonpyoHi
I dont understand what the problem is. The Toshiba units are delivered with a Recovery CD. The Windows OS on this recover CD is already activated and its not necessary to activate anything.
If you use the original Windows from Microsoft CD so you have to activate this OS. But this is not a Toshiba problem. You have to contact the Microsoft.
Note: You can not activate Windows OS from the original Microsoft CD with the Toshiba image number or something like that!
Bye -
Flickering Problem in external Facing Portal
Hey
we had some problems developing our external facing portal mainly because of general flickering of the web page ( the page height is set to automatic and it causes the borders to adjust constantly to the current content height).
we have a partial solution for this with:
meta http-equiv="Page-Enter" content="blendTrans(Duration=.01)"
meta http-equiv="Page-Exit" content="blendTrans(Duration=.01)"
this works just as we want, but it seems to have no effects on the first page of every new browser window. have anyone faced a problem like this before?
P.S - Our isolation method is URL and thats
thanksthanks for the reply , i would like to wait a bit more for similar answer to this problem. so far all the external facing portals i have seen with URL isolation method on IViews have this problem.
With my partial solution the render time looks a lot faster compared to the embedded Isolation tought.
please reply if you know why the meta tag is not working on the first time you open a page on a window
thanks
Edited by: Phatinox on Jun 28, 2011 1:03 AM -
Flickering problem with loadMovie()
Hi
I am developing an application in which i need to call
external swf files in my movieclips.
When i load an external swf file in to movieclip some
flickering effect take place.
so is there any solution to overcome this problem.
Thanks In Advance.......I think that I have attached the file you are wanting. Thanks for your help. Pitcairn.zip (96.75 kB - downloaded 13 times.)
Maybe you are looking for
-
I have two inconviniences with fire fox.. 1)when i want to go another from a tab,it shows firefox not responding, for a while then opens that tab!this is embarrassing me a lot by taking so much time!!why it happens? 2) every time when adobe flash pla
-
List of issues with new look bt vision
Hi, There are a lot of things that are no longer present in the new look bt vision. As such they out weigh the "benefits" Will these issues be addressed at all - and is BT aware of them? Issues: 1. crashing - it crashes randomly once a week - the old
-
[CS5] masking a person on a clip with heavy motion stabalization already done
Hoping to get somekind of a basic outline on how to proceed with this task: I've been working on some really nasty willdly jerky footage. I received some coaching that directed me to use the stabalizer aspect of motion tracking and man did that reall
-
Safari crashing in New MacBook Air?
I just bought the new MacBook Air 13' but when I first set it up the safari application crashes after 3 or 4 seconds max. I have updated my MacBook to the last update but still problem appear! Here is the log of the problem: Process: WebProce
-
Hello, I have a 15 digit code. It's of varchar data type. Now when i try to pull it into Obiee it's dropping off the trailing zero's. Is there a way to get them. I know we can get them in the report by using html tag. But i have this in the prompt. i