ALV Grid alignment
Hi,
I have an alv grid , which gives the output in an aligned format on execution .
If the same program is executed in background and printed on spool , the columns get misaligned . How can i align them with their columne headings ?
Thanks
Check these thread -
ALV Grid At Background
ALV GRID CONTROL + BACKGROUND JOB
Also, check the forum there is a blog also on displaying the ALV Grid in background with lots of good information on it.
Regards,
Amit
Similar Messages
-
ALV Grid - Alignment Issues in TOP OF PAGE.
Hi,
We have a requirement to right align text in the report header.
We are using REUSE ALV GRID DISPLAY, but using TOP-OF-PAGE event - the whole text is left aligned.
I tried using Class CL_DD_DOCUMENT which solved the alignment issue, but I am not able to see the header while printing/downloading to excel.
I want the header to be available while downloading/printing the list. Any suggestions?
Thanks in advance,
Harveen.Hi
The ALV download only the grid into the file, so not the data you're writing in TOP_OF_PAGE event.
If you need to do that, you should create an your own buttom to download the file.
Max -
How to align text {center/left/right} in the column of ALV grid
Hai all,
I am displaying one check box in the ALV grid, but default it is coming left align in the column,
how can i assign it to the center of the column.
Thanks,
SREEVATHSAVA.G
Edited by: SREE on Aug 14, 2009 7:53 AMHi,
DATA:
lr_model type ref to cl_salv_wd_config_table,
lr_col type ref to cl_salv_wd_column.
lr_col = lr_model->if_salv_wd_column_settings->get_column( 'EMPID' ).
lr_col->SET_H_ALIGN(value = CL_WD_TABLE_COLUMN=>E_H_ALIGN- CENTER).
AUTO TYPE WDY_UIE_LIBRARY_ENUM_TYPE VALUE '00', " TableColumnHAlign.auto
CENTER TYPE WDY_UIE_LIBRARY_ENUM_TYPE VALUE '01', " TableColumnHAlign.center
FORCED_LEFT TYPE WDY_UIE_LIBRARY_ENUM_TYPE VALUE '04', " TableColumnHAlign.forcedLeft
END_OF_LINE TYPE WDY_UIE_LIBRARY_ENUM_TYPE VALUE '05', " TableColumnHAlign.endOfLine
FORCED_RIGHT TYPE WDY_UIE_LIBRARY_ENUM_TYPE VALUE '06', " TableColumnHAlign.forcedRight
BEGIN_OF_LINE TYPE WDY_UIE_LIBRARY_ENUM_TYPE VALUE '07', " TableColumnHAlign.beginOfLine
Regards,
Lekha. -
Need to display two ALV GRIDs in a single screen
Hi,
I have a question, i'm using version 4.6. I want to display 2 ALVs in a single screen or by calling.
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 : Display In a single report
ALV1 report (Editable ,Has to be a GRID)
ALV2 report (Non Editable, Has to be a GRID)
(or)
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 :
ALV1 report (Editable ,Has to be a GRID, with a custom button to call ALV2 hiding the ALV1 ie not visible to user)
ALV2 report (Non Editable ,Has to be a GRID, with a custom button to call ALV1 hiding the ALV2 ie not visible to user)
Please help me <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada GalindoHi
ABAP List Viewer
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Regards
Anji -
Displaying items in a single line in ALV grid using ALV_TOP_OF_PAGE.
Hello Guys,
I am having a problem in displaying items in a single line in the ALV Grid using event ALV_TOP_OF_PAGE.
My requirement is to group items on a single line i.e. in the example below, Vendor code and posting date are on the same line. The next line the prints Vendor Name and Document no.
Vendor Code: 123123 Posting Date : 01.01.2011
Vendor Name: ABCD Document No: 152246598.
Here is my code in subroutine 'ALV_TOP_OF_PAGE',
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Vendor Code'.
APPEND wa_list_comments TO it_list_comments.
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Posting Date'.
APPEND wa_list_comments TO it_list_comments.
The above code prints in the following format i.e one below the other,
Vendor Code: 123123
Posting Date : 01.01.2011.
I also tried using HTML_TOP_OF_PAGE, but it didn't work.
Can anybody please help me out with this.
Regards,
Danish.Hi Danish,
Your problem is with the alignment and you need some fix positions .
The solution i feel is u can use as below :
In CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
use
i_callback_html_top_of_page = 'HTML_TOP_OF_PAGE'.
Now on calling routine call use cl_dd_document class :
FORM html_top_of_page USING document TYPE REF TO cl_dd_document .
data : doctable TYPE REF TO cl_dd_table_element,
col1_t1 TYPE REF TO cl_dd_area,
col2_t1 TYPE REF TO cl_dd_area,
col1_t2 TYPE REF TO cl_dd_area,
col2_t2 TYPE REF TO cl_dd_area.
add quick table with five columns
CALL METHOD lw_document->add_table
EXPORTING
no_of_columns = 2
border = '0'
cell_background_transparent = ' '
width = '100%'
IMPORTING
table = doctable.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '40%'
IMPORTING
column = col1_t1.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '60%'
IMPORTING
column = col2_t1.* Filling columns in row
Call method doctable->new_row.
CALL METHOD doctable->add_column
EXPORTING
width = '40%'
IMPORTING
column = col1_t2.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '60%'
IMPORTING
column = col2_t2.
*Now adding the texts
lw_text1 = 'your first text'
CALL METHOD col1_t1->add_text
EXPORTING
text = lw_text.
*Similarly add text for other columns
*Adujust % in width to adjust the column as required
Endform.
Hope this will solve your problem . -
ECC6 - ALV Grid Output Conversion Exit
Hi,
I'm creating a program in ECC6 to display the report in ALV grid by called FM: REUSE_ALV_GRID_DISPLAY.
EG: Select field (TPLNR) from table IFLOT. Value retrieved are: ?0100000000000000029. However, the output doesnt do the conversion exit to change the TPLNR value to format MY.FO.001.
I did the same in 4.6C system, the ALV report able to display the correct value of TPLNR. Eg: MY.FO.001 instead of
?0100000000000000029.
If anyone encountered the same issues in ECC6 system which In an ALV grid, it doesnt to display data that is based on a domain with a conversion exit?Hi Simone,
Check this NO_CONVEXT in the Structure LVC_S_FCAT. Populate with SPACE in the FCAT Build.
If you have conversion Exit to that field then use the CONVEXIT in the same structure while building Field Catalog. sometimes you have Z converions so you need to check this.
If you a Table field in the FCAT then you dont need all these things. because conversion exits are automatically done. Also COL_OPT = 'X' this will align the ALV in the correct format for output. hope this helps. -
How to focus a cell on ALV grid display
hi,
I need to set the focus to the first cell on the first row in the ALV grid.I am using object oriented ALV grid control.Can anyone help me out in this regard.
Regards,
Anil.Re: simple Grid display
Have a look at below links. It contains sample code for alv grid.
http://www.erpgenie.com/abap/controls/alvgrid.htm#Complete%20code%20for%20the%20ALV%20grid%20example
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
http://sap.niraj.tripod.com/id64.html
Also have a look at below for OO alv grid:
http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/frameset.htm
-->
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status iii. I_callback_user_command : routine where the function codes are handled iv. I_structure name : name of the dictionary table v. Is_layout : structure to set the layout of the report vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block II. it_fieldcat : field catalog III. i_tabname : internal table name with output data IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output ii. t_outtab_item : Name of the internal table in the program containing the output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary) E. ref_tabname : table (dictionary) F. key(1) : column with key-color G. icon(1) : icon H. symbol(1) : symbol I. checkbox(1) : checkbox J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode BCALV_GRID_DEMO Simple ALV Control Call Demo Program BCALV_TREE_DEMO Demo for ALV tree control BCALV_TREE_SIMPLE_DEMO BC_ALV_DEMO_HTML_D0100
Reward If useful -
Hi gurus what is ALV grid contol explain me plz
hi gurus what is ALV grid contol explain me plz
Hi
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
ALV
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
1->go to Screen Painter, choose the column which you need to make as drop down.
2->Click F2 to go tothe properties screen.
3->Select Listbox or Listbox with Key for the DROPDOWN field (3rd field in properties tab)
4->give value for the FCODE field also, to track the actions in SY_UCOMM when the user selects the value.
5->in the ABAP code, you need to include the logic to populate values for this drop down. You can use the function module VRM_SET_VALUES to populate the listbox in each line of the table control. The fucntion module has to be called in the PBO module, which is defined inside the loop...endloop statement in the flow logic.
6->for changing the values based on user selection, you can include the code in the PAI module, checking SY_UCOMM or OK_CODE.
check this link:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBTUT/BCDWBTUT.pdf
http://help.sap.com/saphelp_40b/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/applet.htm
Have a look at these good links-
http://www.allsaplinks.com/dialog_programming.html
http://sap.mis.cmich.edu/sap-abap/abap09/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://sap.mis.cmich.edu/abap-00/
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com
http://www.sapgenie.com/abap/example_code.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://www.sapbrain.com/TUTORIALS/default.html
http://www.sappoint.com/abap/spmp.pdf
http://sappoint.com/abap.html
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/abap/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://www.sappoint.com/faq/faqdiapr.pdf
http://www.allsaplinks.com/dialog_programming.html
http://www1.sapdesignguild.org/resources/MiniSG/3_Managing/3_Overview_Tree_Variants.htm
http://www1.sapdesignguild.org/resources/MiniSG/3_Managing/3_Design_Layout.htm
Check this demo program:
SAPCOLUMN_TREE_CONTROL_DEMO
Sample code:
http://www.geocities.com/victorav15/sapr3/utilities/zvvooa3.txt
How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
chk these 2 useful links
http://www.sap-img.com/abap-function.htm
http://www.geocities.com/mpioud/Abap_programs.html
check this...
http://sapbrain.com/TUTORIALS/TECHNICAL/ALV_tutorial.html
ALV WITH TWO CONTAINER ON ONE PAGE
Look at the below threads ...
Logo in OO ALV Grid
Display Two Report IN ONE
TOP_OF_PAGE in ALV Grid Using OO Approach!!
ALV in webdynpro
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40794172-b95a-2910-fb98-b86d8a0918b4
Reward if useful.
Regards,
Chandru -
Hi Folks ,
i'm using an alv grid in my program and might have change the initial size of it's custom container which seats above it .
is there any way that i can chnage the initial size (H/V) of it ?
i try via screen table but it can't cupture the custom container name within the loop .you can use the set_alignment method of cl_gui_custom_container class for this
create object my_container
exporting
container_name = 'OUTPUT_CONTAINER'
exceptions
others = 1.
case sy-subrc.
when 0.
when others.
raise cntl_error.
endcase.
alignment = my_container->align_at_left +
my_container->align_at_right +
my_container->align_at_top +
my_container->align_at_bottom.
call method my_container->set_alignment
exporting
alignment = alignment.
Regards
Raja -
Vendor open items wise ALV Grid Display (FBL1N) report to Excel Sheet
Hi All,
I need vendor wise open items and cleared items in ALV Grid format in excel sheet.
I'm Trying that in T Code FBL1N, After the execution. I had select ALV Grid format like this From the menu bar->Settings-> Switch list.
After that i get ALV Grid format, Then i'm doing export the data to excel sheet. like this From the Menu bar->List->Export->Spread sheet.
That time i'm getting Error Message no. 0K064, Filter criteria, sorting, totals and subtotals are not taken into account.
I want vendor wise sorting totals and subtotals,
How can i over come this Error please let me now.
Thanks,
AmarHi Amar,
Please check the KBA 2083705.
https://websmp230.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3230383337303526
Regards,
Monika -
First try with ALV Grid and Abap Objects
Hi,
this is my first try to write a simple report which just reads a textfile and display it in an ALV Grid. As a basis, I used some examples from SDN, but it did not work as expected
I would like just to use a docking container. I do not need a separate area for the ALV Grid. The report gives no syntax errors, but it just display the report title, nothing else. SAP R/3 Release is 4.7. Below is the source code of the report. Any idea what is missing?
*& Report Z_PLAN_TEXT_UPLOAD *
REPORT z_plan_text_upload.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_dynnr TYPE sy-dynnr,
gf_repid TYPE sy-repid.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Local Class Definition
* Local Class Implementation
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
SKIP.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SKIP.
PARAMETERS:
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn.
SELECTION-SCREEN END OF BLOCK b1.
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
gf_dynnr = sy-dynnr.
gf_repid = sy-repid.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog
CHANGING gt_fieldcat.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
* PARENT =
repid = gf_repid
dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
* RATIO =
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid IS INITIAL.
CREATE OBJECT go_alv_grid
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid is initial
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Kostenstelle' .
ls_fcat-seltext = 'Kostenstelle' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalogI have added some more functionality to my report. The good thing is, the report works as it should.
BUT, I'm not really sure, whether this is a good (correct) design. The report works the following way:
1. Read planning data form text file into internal table
2. Display the internal table
3. Convert the data and display the converted result
4. Post the converted data to the system
5. Display log with messages
The main thing is, I would like to know, do i really need two dynros, to display the two different internal tables or is it possible just to use one ALV-Grid? I was not able to find another solution. Any comment or help to the report is appreciated.
*& Report Z_PLAN_TEXT_UPLOAD_TEST *
REPORT z_plan_text_upload_test.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_okcode TYPE ui_func,
gf_balloghndl TYPE balloghndl.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid_0100 TYPE REF TO cl_gui_alv_grid,
go_alv_grid_0200 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungsposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Bapi Strukturen
DATA:
gs_headerinfo TYPE bapiplnhdr,
gt_indexstructure TYPE TABLE OF bapiacpstru,
gs_indexstructure LIKE LINE OF gt_indexstructure,
gt_coobject TYPE TABLE OF bapipcpobj,
gs_coobject LIKE LINE OF gt_coobject,
gt_pervalue TYPE TABLE OF bapipcpval,
gs_pervalue LIKE LINE OF gt_pervalue,
gt_return TYPE TABLE OF bapiret2,
gs_return LIKE LINE OF gt_return,
gt_control TYPE TABLE OF bapipcpctrl,
gt_totvalue TYPE TABLE OF bapipcptot.
TYPES:
BEGIN OF gy_bapi_input,
version TYPE versn,
* perio TYPE co_perio,
fisc_year TYPE gjahr,
coobject(10) TYPE c,
cost_elem TYPE kstar,
wkgbtr01 TYPE wkgxxx,
wkgbtr02 TYPE wkgxxx,
wkgbtr03 TYPE wkgxxx,
wkgbtr04 TYPE wkgxxx,
wkgbtr05 TYPE wkgxxx,
wkgbtr06 TYPE wkgxxx,
wkgbtr07 TYPE wkgxxx,
wkgbtr08 TYPE wkgxxx,
wkgbtr09 TYPE wkgxxx,
wkgbtr10 TYPE wkgxxx,
wkgbtr11 TYPE wkgxxx,
wkgbtr12 TYPE wkgxxx,
END OF gy_bapi_input.
DATA:
gt_bapi_input TYPE TABLE OF gy_bapi_input,
gs_bapi_input LIKE LINE OF gt_bapi_input.
* Anwendungs-Log
DATA: gs_balsmsg TYPE bal_s_msg.
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SELECTION-SCREEN SKIP.
PARAMETERS:
gp_kokrs LIKE coep-kokrs,
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn,
gp_test AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b1.
* Local Class Definition
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar_0100 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0100 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm,
handle_toolbar_0200 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0200 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm.
PRIVATE SECTION.
ENDCLASS. "lcl_event_handler DEFINITION
* Local Class Implementation
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_toolbar_0100.
PERFORM handle_toolbar_0100
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0100.
PERFORM handle_user_command_0100
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
METHOD handle_toolbar_0200.
PERFORM handle_toolbar_0200
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0200.
PERFORM handle_user_command_0200
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
ENDCLASS. "lcl_event_handler IMPLEMENTATION
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
PERFORM create_log.
gs_return-type = 'I'.
IF gp_test = 'X'.
gs_return-message = text-010.
ELSE.
gs_return-message = text-020.
ENDIF.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
gs_balsmsg-msgty = sy-msgty.
gs_balsmsg-msgid = sy-msgid.
gs_balsmsg-msgno = sy-msgno.
gs_balsmsg-msgv1 = sy-msgv1.
gs_balsmsg-msgv2 = sy-msgv2.
gs_balsmsg-msgv3 = sy-msgv3.
gs_balsmsg-msgv4 = sy-msgv4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDIF.
CALL SCREEN '0100'.
*& Module status_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999 "full-screen size !!!
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog_input
CHANGING gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0100 IS INITIAL.
CREATE OBJECT go_alv_grid_0100
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0100 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0100 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0100.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0100->handle_toolbar_0100
FOR go_alv_grid_0100.
SET HANDLER go_event_handler_0100->handle_user_command_0100
FOR go_alv_grid_0100.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0100->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0100->set_toolbar_interactive.
ENDMODULE. " status_0100 OUTPUT
*& Module status_0200 OUTPUT
* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog---------------------------------------*
PERFORM build_fieldcatalog_bapi_input
CHANGING
gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0200 IS INITIAL.
CREATE OBJECT go_alv_grid_0200
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0200 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0200 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0200.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0200->handle_toolbar_0200
FOR go_alv_grid_0200.
SET HANDLER go_event_handler_0200->handle_user_command_0200
FOR go_alv_grid_0200.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0200->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_bapi_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0200->set_toolbar_interactive.
CALL METHOD go_alv_grid_0200->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = go_alv_grid_0200.
ENDMODULE. " status_0200 OUTPUT
*& Module user_command_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0100 INPUT
*& Module user_command_0200 INPUT
* text
MODULE user_command_0200 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0200 INPUT
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalog
*& Form handle_toolbar_0100
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0100
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'KONV'.
ls_toolbar-quickinfo = 'Konvertieren'.
ls_toolbar-text = 'Konvertieren'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0100
*& Form handle_user_command_0100
* text
* -->P_E_UCOMM text
FORM handle_user_command_0100
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'KONV'.
PERFORM convert_data.
ENDCASE.
ENDFORM. " handle_user_command_0100
*& Form exit_program
* text
* --> p1 text
* <-- p2 text
FORM exit_program.
CALL METHOD go_alv_grid_0100->free.
IF NOT go_alv_grid_0200 IS INITIAL.
CALL METHOD go_alv_grid_0200->free.
ENDIF.
CALL METHOD go_docking_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = sy-repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(500).
ENDIF.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form handle_toolbar_0200
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0200
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'POST'.
ls_toolbar-quickinfo = 'Buchen'.
ls_toolbar-text = 'Buchen'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0200
*& Form handle_user_command_0200
* text
* -->P_E_UCOMM text
FORM handle_user_command_0200
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'POST'.
PERFORM post.
ENDCASE.
ENDFORM. " handle_user_command_0200
*& Form convert_data
* text
* --> p1 text
* <-- p2 text
FORM convert_data.
DATA: lf_perio(3) TYPE n.
LOOP AT gt_text_input INTO gs_text_input.
TRANSLATE gs_text_input-planbetrag USING '. '.
TRANSLATE gs_text_input-planbetrag USING ',.'.
CONDENSE gs_text_input-planbetrag.
gs_bapi_input-version = gp_versn.
gs_bapi_input-fisc_year = gp_gjahr.
gs_bapi_input-coobject = gs_text_input-kostenstelle.
gs_bapi_input-cost_elem = gs_text_input-kostenart.
lf_perio = gs_text_input-planperiode.
CASE lf_perio.
WHEN '001'.
gs_bapi_input-wkgbtr01 = gs_text_input-planbetrag.
WHEN '002'.
gs_bapi_input-wkgbtr02 = gs_text_input-planbetrag.
WHEN '003'.
gs_bapi_input-wkgbtr03 = gs_text_input-planbetrag.
WHEN '004'.
gs_bapi_input-wkgbtr04 = gs_text_input-planbetrag.
WHEN '005'.
gs_bapi_input-wkgbtr05 = gs_text_input-planbetrag.
WHEN '006'.
gs_bapi_input-wkgbtr06 = gs_text_input-planbetrag.
WHEN '007'.
gs_bapi_input-wkgbtr07 = gs_text_input-planbetrag.
WHEN '008'.
gs_bapi_input-wkgbtr08 = gs_text_input-planbetrag.
WHEN '009'.
gs_bapi_input-wkgbtr09 = gs_text_input-planbetrag.
WHEN '010'.
gs_bapi_input-wkgbtr10 = gs_text_input-planbetrag.
WHEN '011'.
gs_bapi_input-wkgbtr11 = gs_text_input-planbetrag.
WHEN '012'.
gs_bapi_input-wkgbtr12 = gs_text_input-planbetrag.
ENDCASE.
COLLECT gs_bapi_input INTO gt_bapi_input.
CLEAR gs_bapi_input.
ENDLOOP. "at gt_text_input
CALL SCREEN 0200.
ENDFORM. " convert_data
*& Form build_fieldcatalog_bapi_input
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_bapi_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'VERSION' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'FISC_YEAR' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COOBJECT' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COST_ELEM' .
ls_fcat-ref_table = 'BAPIPCPVAL' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR01'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR02'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR03'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR04'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR05'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR06'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR07'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR08'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR09'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR10'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR11'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR12'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. " build_fieldcatalog_bapi_input
*& Form post
* text
* --> p1 text
* <-- p2 text
FORM post.
DATA:
lf_index(6) TYPE n,
lf_kostl LIKE csks-kostl,
lf_aufnr LIKE aufk-aufnr,
lf_kstar LIKE cska-kstar.
DATA:
lt_csks TYPE TABLE OF csks.
break c5085345.
* Header
gs_headerinfo-co_area = gp_kokrs.
gs_headerinfo-fisc_year = gp_gjahr.
gs_headerinfo-period_from = '001'.
gs_headerinfo-period_to = '012'.
gs_headerinfo-version = gp_versn.
gs_headerinfo-plan_currtype = 'C'.
LOOP AT gt_bapi_input INTO gs_bapi_input.
* Fill index structure
CLEAR gs_indexstructure.
lf_index = sy-tabix.
gs_indexstructure-object_index = lf_index.
gs_indexstructure-value_index = lf_index.
gs_indexstructure-attrib_index = '000000'.
INSERT gs_indexstructure INTO TABLE gt_indexstructure.
* Fill coobject
CLEAR gs_coobject.
gs_coobject-object_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_kostl.
SELECT * FROM csks INTO TABLE lt_csks
WHERE
kokrs = gp_kokrs AND
kostl = lf_kostl.
IF sy-subrc = 0.
gs_coobject-costcenter = lf_kostl.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_aufnr.
CALL FUNCTION 'K_ORDER_READ'
EXPORTING
aufnr = lf_aufnr
EXCEPTIONS
not_found = 1.
IF NOT sy-subrc = 0.
gs_return-type = 'E'.
gs_return-message+0(10) = 'CO-Objekt '.
gs_return-message+10(10) = gs_bapi_input-coobject.
gs_return-message+20(20) = ' existiert nicht.'.
CONDENSE gs_return-message.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
EXIT.
ENDIF. "IF NOT sy-subrc = 0
gs_coobject-orderid = lf_aufnr.
ENDIF. "sy-subrc = 0
INSERT gs_coobject INTO TABLE gt_coobject.
* Period value
gs_pervalue-value_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-cost_elem
IMPORTING
output = lf_kstar.
gs_pervalue-cost_elem = lf_kstar.
gs_pervalue-fix_val_per01 = gs_bapi_input-wkgbtr01.
gs_pervalue-fix_val_per02 = gs_bapi_input-wkgbtr02.
gs_pervalue-fix_val_per03 = gs_bapi_input-wkgbtr03.
gs_pervalue-fix_val_per04 = gs_bapi_input-wkgbtr04.
gs_pervalue-fix_val_per05 = gs_bapi_input-wkgbtr05.
gs_pervalue-fix_val_per06 = gs_bapi_input-wkgbtr06.
gs_pervalue-fix_val_per07 = gs_bapi_input-wkgbtr07.
gs_pervalue-fix_val_per08 = gs_bapi_input-wkgbtr08.
gs_pervalue-fix_val_per09 = gs_bapi_input-wkgbtr09.
gs_pervalue-fix_val_per10 = gs_bapi_input-wkgbtr10.
gs_pervalue-fix_val_per11 = gs_bapi_input-wkgbtr11.
gs_pervalue-fix_val_per12 = gs_bapi_input-wkgbtr12.
INSERT gs_pervalue INTO TABLE gt_pervalue.
ENDLOOP. "at gt_bapi_input
* Buchungsbaustein
CALL FUNCTION 'BAPI_PRIM_COST_CHECK_AND_POST'
EXPORTING
header_info = gs_headerinfo
testrun = gp_test
* DELTA = ' '
TABLES
idx_structure = gt_indexstructure
object = gt_coobject
per_value = gt_pervalue
tot_value = gt_totvalue
contrl = gt_control
return = gt_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
LOOP AT gt_return INTO gs_return.
gs_balsmsg-msgty = gs_return-type.
gs_balsmsg-msgid = gs_return-id.
gs_balsmsg-msgno = gs_return-number.
gs_balsmsg-msgv1 = gs_return-message_v1.
gs_balsmsg-msgv2 = gs_return-message_v2.
gs_balsmsg-msgv3 = gs_return-message_v3.
gs_balsmsg-msgv4 = gs_return-message_v4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDLOOP. "AT gt_return
PERFORM show_log.
ENDFORM. " post
*& Form create_log
* text
* --> p1 text
* <-- p2 text
FORM create_log .
DATA: ls_balslog TYPE bal_s_log.
* Einige Verwaltungsdaten
ls_balslog-extnumber = 'ZPLAN010'.
ls_balslog-aluser = sy-uname.
ls_balslog-alprog = sy-repid.
* Create
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = ls_balslog
* IMPORTING
* e_log_handle = gf_balloghndl
EXCEPTIONS
log_header_inconsistent = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_log
*& Form add_log_message
* text
* -->P_GS_BALSMSG text
FORM add_log_message
USING
ps_balsmsg TYPE bal_s_msg.
break c5085345.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
* I_LOG_HANDLE =
i_s_msg = ps_balsmsg
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_messa
*& Form add_log_message_free_text
* text
* -->P_GS_RETURN_TYPE text
* -->P_GS_RETURN_MESSAGE text
FORM add_log_message_free_text
USING
ps_type
ps_message.
CALL FUNCTION 'BAL_LOG_MSG_ADD_FREE_TEXT'
EXPORTING
* I_LOG_HANDLE =
i_msgty = ps_type
* I_PROBCLASS = '4'
i_text = ps_message
* I_S_CONTEXT =
* I_S_PARAMS =
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_message_free_text
*& Form show_log
* text
* --> p1 text
* <-- p2 text
FORM show_log .
DATA:
l_s_display_profile TYPE bal_s_prof.
* get display profile
CALL FUNCTION 'BAL_DSP_PROFILE_NO_TREE_GET'
IMPORTING
e_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* use grid for display if wanted
l_s_display_profile-use_grid = 'X'.
* set report to allow saving of variants
l_s_display_profile-disvariant-report = sy-repid.
* when you use also other ALV lists in your report,
* please specify a handle to distinguish between the display
* variants of these different lists, e.g:
l_s_display_profile-disvariant-handle = 'LOG'.
* call display function module
* We do not specify any filter (like I_S_LOG_FILTER, ...,
* I_T_MSG_HANDLE) since we want to display all logs available
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXPORTING
i_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Help needed for editable alv grid program
hi,
Can you please tell me how to set a update button in application toolbar of alv griv without suppressing it and how to write the code for that update button so that if I change my editable column data and press the update button my updated data should be stored in my database table.
the code what i wrote is:
TABLES: vbak,vbap.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_final,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
matnr LIKE vbap-matnr,
posnr LIKE vbap-posnr,
END OF t_final.
DATA: i_final TYPE STANDARD TABLE OF t_final INITIAL SIZE 0,
wa_final TYPE t_final.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'VBELN'.
fieldcatalog-seltext_m = 'sales order'.
fieldcatalog-col_pos = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ERDAT'.
fieldcatalog-seltext_m = 'date'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'material no.'.
fieldcatalog-col_pos = 2.
fieldcatalog-edit = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'POSNR'.
fieldcatalog-seltext_m = 'line item no.'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT avbeln aerdat bmatnr bposnr FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INTO TABLE i_final WHERE avbeln = bvbeln.
ENDFORM. " DATA_RETRIEVAL
thanks in advance.hi sudhir,
thanks for ur reply.
after seeing the code u send to me i made changes to my program.but still when i click on update button,nothing is happening.can u please suggest me an idea.
TABLES: vbak,vbap.
TYPE-POOLS: slis. "ALV Declarations
TYPES: BEGIN OF t_final,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
matnr LIKE vbap-matnr,
posnr LIKE vbap-posnr,
END OF t_final.
DATA: i_final TYPE STANDARD TABLE OF t_final WITH HEADER LINE,
wa_final TYPE t_final.
*DATA:i_final LIKE vbap OCCURS 0.
*DATA:wa_final LIKE vbap.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'VBELN'.
fieldcatalog-seltext_m = 'sales order'.
fieldcatalog-col_pos = 0.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ERDAT'.
fieldcatalog-seltext_m = 'date'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'material no.'.
fieldcatalog-col_pos = 2.
fieldcatalog-edit = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'POSNR'.
fieldcatalog-seltext_m = 'line item no.'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'GUI_STAT'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = it_events
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT avbeln aerdat bmatnr bposnr FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INTO TABLE i_final WHERE avbeln = bvbeln.
ENDFORM. " DATA_RETRIEVAL
FORM GUI_STAT *
--> RT_EXTAB *
FORM gui_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'UPDATE' EXCLUDING rt_extab.
ENDFORM.
FORM USER_COMMAND *
--> U_COMM *
--> RS_SELFIELD *
FORM user_command USING u_comm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA:selfield TYPE slis_selfield.
CASE u_comm.
WHEN 'UPDATE'.
LOOP AT i_final ."into wa_final.
i_final-matnr = vbap-matnr.
update (vbap) from table i_final.
IF sy-subrc = 0.
MESSAGE s000(0) WITH 'records updated successfully'.
ENDIF.
ENDLOOP.
ENDCASE.
ENDFORM. -
How can we find out data in an editable ALV grid has been changed or not?
Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
ShahanaHi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana -
ALV Grid: how to save changes made in an editable Grid
Hi,
How to save changes made bu the user in any of the editable cells in a ALV Grid?
Regards,
deb.Hi,
If you are using the FM look at the following example code...
data: LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.<<<<<------
gt_layout-zebra = 'X'.
gt_layout-detail_popup = 'X'.
gt_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = i_repid
i_callback_user_command = 'USER_COMMAND1'
it_fieldcat = header
is_layout = gt_layout
i_callback_top_of_page = 'TOP-OF-PAGE1'
i_grid_title = text-h17
it_sort = gt_sort[]
i_default = 'X'
i_save = 'U'
is_variant = gt_variant
it_events = gt_events
I_GRID_SETTINGS = LC_GLAY<<<<<<------
TABLES
t_outtab = itab.
clear itab.
Form USER_COMMAND1
FORM USER_COMMAND1 USING u_ucomm LIKE sy-ucomm
us_selfield TYPE slis_selfield."#EC CALLED
case u_ucomm.
when '&DATA_SAVE'.<<<<<<<<----
This will come after the data was EDITTED and when SAVE was clicked by user in output scren.
Here now in the final internal table(ITAB) you can find the data changed in EDIT mode.
After this you can do manipulation what ever you want.
Thanks.
If this helps you reward with points. -
How to update data in the database through ALV grid
Hi All,
I diplayed an ALV grid with five fields in a classical report. I have already set the fieldcat for one field as wa_fcat_edit = 'X'. I am able to edit(modify) the data in that field. But I want to update the data into the database which is modified by me in that field. Can I update the data using BDC or any other procedure?
This is an urgent require ment for me. Please help me ASAP.
Thanks & Regards,
Ramesh.Hi
Please go through the link.
Link: [http://www.****************/Tutorials/ALV/Edit/demo.htm]
regards
ravisankar
Maybe you are looking for
-
How can I print a list of the apps I have on my iPad and iPhone ?
I had to reinstall all my apps when I upgraded to the new iOS - while some were listed in my 'purchased' list a lot weren't and I had to go through all my iPhone apps to see what was missing. And my folders all vanished as well! Any hints or tips be
-
Avoid creation of Private Folder
Hello, We are using EasyDMS and I would like all my users to use the public folder only. Is there a way to disable the request to create private folder when a user is accessing the Easy DMS for the first time? Regards, Yossef
-
Use of Services without SR and ESR
Hello, for this one I need to explain something: I'm writing my diploma about ESOA. Because of this I allready have created a application which uses Enterprise Services. But because I used the ESWorkplace I've had some restrictions. - If I used the S
-
How to create BP organization from WebIC instead of BP Person.
Hi, I am using the component IUICMDC/SearchAll component/view for searching accounts and as well as creating new accounts of type BP Persons(Partner Category:Person1).Now I want to create New account BP Organization(Partner Category:Organization2)
-
It ought to be easy, but with my new iPhoto '08 I cannot duplicate a photo. When I select a photo, the Duplicate command is greyed out. When I try to edit, once again the Duplicate command isn't available. What am I missing?