ALV Grid and ALV List difference?

Hello,
Can you help me differentiate ALV List and ALV grid and the low-level definition or context of each?
Also, can you give me a transaction code that outputs an ALV list as well as a tcode for ALV grid?
Thanks,
Jennah

Hi Kirtish,
Thanks but I havent done any function module stuff as I am not an ABAPer but anyway can you guide me through thios?
"I hope this might slove your query. For more please refer to documentation on ALV and also implement the ALV LIST and GRID reports. By using class Class CL_GUI_ALV_GRID, Function module REUSE_ALV_LIST_DISPLAY , REUSE_ALV_GRID_DISPLAY and some more functions like that only."
I will give you some tcode can you please try tcode FBL1n? then execute the report. What is the output is it an ALV list?
I wish to see an ALV list also an ALV grid to see difference.
Tjhakns,
Jennah

Similar Messages

Display totals on the first line in ALV grid and ALV LIST

Generally we wll display totals at the end..
bu the requirement is to display it in the first line of the column.
how to display the totals in the first line?
I have used ALV GRID and ALV LIST (choice) using function modules.
Plz help me
.for example : Po qty : Should display total po qty on the first line of the Po line item.

IN LAYOUT
ILAYOUT-totals_before_items = 'X'.
REGARDS
SHIBA DUTTA

Problem with same layout (variant) for two ALV Grid and ALV Tree

Hello!
I have two docking containers on the screen. On the left i have cl_gui_alv_tree, on the right cl_salv_table.
When a user set a default layout for ALV Grid (or ALV Tree), raport starts and sets this layout in both objects (tree and grid).
How to avoid this?

Hi,
Take Two radio buttons.
First radion button display the two containers in grid format,
second radio button display the two containers in tree format base on user selection.
CREATE OBJECT G_DOCING_CONTAINER
    EXPORTING PARENT = G_CUSTOM_CONTAINER."G_CONTAINER.
DISPLAY THE DATA IN GRID FORMATA
CREATE OBJECT r_grid
    EXPORTING
      i_parent          = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
      EXPORTING
        width      = 1300.
DISPLAY THE GRID DATA IN SECOND CONTAINER
CREATE OBJECT r_grid1
    EXPORTING
      i_parent          = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
      EXPORTING
        width      = 1300.
OTHERWISE WE CAN DISPLAY THE TWO CONTAINERS DATA IN A GRID FORMAT
CREATE OBJECT g_tree
    EXPORTING
      parent                = g_docing_container"g_custom_container
IF R1 = 'X'. "FOR GRID DISPLAY
CALL METHOD r_grid1->set_table_for_first_display
CALL METHOD r_grid2->set_table_for_first_display
ELSE.
************TREE DISPLAY
ENDIF.
regards,
muralii

ALV Grid and LIST?

HI all,
Diff between ALV GRID and ALV LIST?
sachin.

Hi,
ckeck these differences.
first one is for list display and second one is for grid display.
For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally.
reward points if hlpful.

Differences between the alv's and alv grid dispaly

hi guys
.........please send the differences between the alv's and alv grid display.
thanks....

Hi Midathala,
Plz go through the links might be useful to you.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Thanks
Mohinder Singh Chauhan

ALV Grid and return to selection screen

Hello
I have an ALV Grid and when I push a buttom that I program appears another ALV Grid. In this second ALV I try to program different buttoms. When I program the BACK buttom I want to go to selection screen.
I try with CALL SELECTION SCREEN but when I stay in selection screen and push the execute buttom the ALV that I see is the second, not the first. It seems that we don't catch the news selections.
I put rs_selfied-refresh = 'X' after the CALL SELECTION SCREEN but is wrong again.
What can I do????

Hello Silvia
There is a simple trick to return from the second ALV list directly back to the selection screen:
*& Report ZUS_SDN_REUSE_ALV_GRID_DISPLAY
REPORT zus_sdn_reuse_alv_grid_display.
TYPE-POOLS: slis.
DATA:
gt_t001        TYPE STANDARD TABLE OF t001,
gt_knb1        TYPE STANDARD TABLE OF knb1.
DATA:
gs_fcat        TYPE slis_fieldcat_alv,
gt_fcat_t001   TYPE slis_t_fieldcat_alv,
gt_fcat_knb1   TYPE slis_t_fieldcat_alv.
PARAMETERS:
p_bukrs        TYPE bukrs DEFAULT '1000'.
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
*     I_PROGRAM_NAME               =
*     I_INTERNAL_TABNAME           =
      i_structure_name             = 'T001'
*     I_CLIENT_NEVER_DISPLAY       = 'X'
*     I_INCLNAME                   =
*     I_BYPASSING_BUFFER           =
*     I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = gt_fcat_t001
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*     I_INTERFACE_CHECK                 = ' '
*     I_BYPASSING_BUFFER                = ' '
*     I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = syst-cprog
      i_callback_pf_status_set          = 'ALV_SET_PF_STATUS'
      i_callback_user_command           = 'ALV_USER_COMMAND'
*     I_CALLBACK_TOP_OF_PAGE            = ' '
*     I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*     I_CALLBACK_HTML_END_OF_LIST       = ' '
*     I_STRUCTURE_NAME                  = ' '
*     I_BACKGROUND_ID                   = ' '
*     I_GRID_TITLE                      =
*     I_GRID_SETTINGS                   =
*     IS_LAYOUT                         =
      it_fieldcat                       = gt_fcat_t001
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER           =
*     ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_t001
*   EXCEPTIONS
*     PROGRAM_ERROR                     = 1
*     OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
*&      Form set_pf_status
*       text
*      -->RT_EXTAB   text
FORM alv_set_pf_status USING rt_extab TYPE slis_t_extab.
* NOTE: identical to STANDARD_FULLSCREEN with additional button
*       for detail list ('DETAILLIST')
SET PF-STATUS 'STANDARD_FULLSCREEN'.
ENDFORM.                    "set_pf_status
*&      Form alv_user_command
*       text
*      -->R_UCOMM    text
*      -->RS_SELFIELDtext
FORM alv_user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
CASE r_ucomm.
*   Display detail list: all customers for selected company code
    WHEN 'DETAILLIST'.
      IF ( rs_selfield-fieldname = 'BUKRS' ).
        SELECT        * FROM knb1 INTO TABLE gt_knb1
               WHERE bukrs = rs_selfield-value.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
*         I_INTERFACE_CHECK                 = ' '
*         I_BYPASSING_BUFFER                = ' '
*         I_BUFFER_ACTIVE                   = ' '
            i_callback_program                = syst-cprog
            i_callback_pf_status_set          = 'ALV_SET_PF_STATUS'
            i_callback_user_command           = 'ALV_USER_COMMAND'
*         I_CALLBACK_TOP_OF_PAGE            = ' '
*         I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*         I_CALLBACK_HTML_END_OF_LIST       = ' '
            i_structure_name                  = 'KNB1'
*       IMPORTING
*         E_EXIT_CAUSED_BY_CALLER           =
*         ES_EXIT_CAUSED_BY_USER            =
          TABLES
            t_outtab                          = gt_knb1
          EXCEPTIONS
            program_error                     = 1
            OTHERS                            = 2.
        IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
<b>*       NOTE: when the program logic returns from the 2nd ALV list
*             and exit = 'X' then the program leaves the
*       1st ALV list, too, and returns to the selection screen.</b>
        rs_selfield-exit = 'X'.
      ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "alv_user_command
Regards
Uwe

Alv Grid and Table Control

What is the difference between Alv Grid and Table Control?Explain in detail..

Table control is a screen table to display table data in a screen. You can add table control to a screen in the Screen Painter. The typical flow-logic to process table control is:
LOOP AT <internal table> CURSOR <scroll-var>
[WITH CONTROL <table-control> ]
[FROM <line1> ] [TO <line2> ].
...<actions>...
ENDLOOP.
ALV Grid is a SAP Technology to display a set of data on the output screen. For example if you have selected some SAP tables and processed these data in a way you want to display, then you can pass the internal table to the ALV Grid and it will be displayed on the result screen as ALV Grid. See example in SE16 result.

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

Help me in alv grid and form printing

hi experts,
my requirement is
i have a check box in the selection screen for batch processing.
if i tick the check box, the data which is in the t_output table should be displayed in alv grid and
in turn if i select one row in alv o/p and double click on it the entire data shold be displayed in the form.
if 2 rows are selected in alv and double clicked on it then data in the two rows is dispalyed in the form.
points are rewarded .
thanks in advance.

Hi,
Check the following link:
http://sapdev.co.uk/reporting/alv/alvgrid_rowsel.htm
Regards,
bhaskar

ALV REPORT: read selected checkbox in alv grid and process the pushbutton

my requirement is to check some rows from alv grid and the press the pushbutton. Thereby following things should process:
select all checked rows into an itab and call the transaction code CJ01 for all
entries......
I am finding the problem that when I select the checkbox....the internal table doesnt recognize the boxes as checked ones......
thanks in advance...
Kartikey Singh,

Data: ref1 type ref to cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          E_GRID = ref1.
      call method ref1->check_changed_data.
      loop at t_output where Flag = 'X'.
        if t_output-VKUEGRU is initial.
          message e000 with text-110.
        endif.
endloop.

Report with two ALV grids and a header

Hi experts,
I have a report with two ALV grids in the same screen, each one in a separated container. The information displays it correctly. The report has been implemented by using OO Programming.
My real trouble is in the header. It must have a logo, a title with a specific font and other information.
I'll attach a capture of my need:
[Report with two ALV grids and a header|http://picasaweb.google.com/lh/photo/AcQD49QPmm-0L_jL2iMedA?feat=directlink]
Then, I want to set up the header you can see, with logo, a font with specific features. Obviously, the header you see has taken from another report. But is the same idea.
I've tried with a third container, using the CL_GUI_CONTAINER and CL_GUI_CONTAINER classes, but it doesn't work.
Any idea? Would welcome any help you can provide.
Thanks in advance,
Jorge Rojas

Hi, Jorge.
Should the header be a"attached" to any of the ALV? Or it should be carried alone?
If first applies, you've given the solution yourself: put the info & logo in first ALV's header and invoke it from the proper method.
You could use CL_GUI_DOCKING_CONTAINER CLASS to divide screen in several containers and then, in the upper one, I would create another one docking container to divide the screen into two: the written info could be performed with an HTML viewer class and the logo with a CL_GUI_PICTURE element.
Cheers.

ALV-Grid and update dynpro fields

Hi!
I've created a dynpro with an ALV-Grid for Data-Overview and fields on the dynpro to change additional data.
My ALV has one editable column, when this value change I calculate other value for a field dynrpo, but I canu2019t see this change in my field dynpro.
How can I update my data filed dynpro when changing the selected row at the ALV.
I use the method handle_data_changed to obtain changes in ALV-Grid and it works fine, but I canu2019t update my fileds on the dynpro, when changing value in ALV.
Thanks for any hints!
Lili.

This error occurs becuase when you change anything on the ALV, control is not triggering the PAI and PBO of your dynpro. Hence your values are not getting updated in the dynpro field.
You should call the CL_GUI_CFW=>DISPATCH in PAI module to trigger the PAI also after the event has been triggered in the ALV.
CALL METHOD CL_GUI_CFW=>DISPATCH
    importing return_code = return_code.
* a control event occured => exit PAI
if return_code <> cl_gui_cfw=>rc_noevent.
    clear g_ok_code.
    exit.
endif.
Regards,
Naimesh Patel

ALV Grid and Icon : Printing Problem

Hi, i develop some reports using ALV Grid and Icon and i'm facing printing problem, all report that using ALV grid with the option icon = 'X' cannot print properly, all the character field showing improper icon instead of the text. While all the ALV grid report with the option icon = ' ' can print normally.
Thanks.

Hi,
Check the Demo Program <b>BCALV_DEMO_TOOLTIP</b>, Here i am able to see the Output Properly, and also able to Print them.
Regards
vijay

ALV GRID AND LIST DISPLAY

Hi experts, how are you.
What is the difference between ALV Grid Display and ALV List Display?

ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally
ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
Thanks
Seshu

ALV Grid and List in one page

Hi
I am new this type of requirment. Please answer to my question.
I want to display in one page
Alv list, Alv Grid1 , Alv Grid2
Ex:
ALV list
Customer number
Customer Name
Customer address
ALV Grid1
Ord Number quatitiy
ALV GRID2
Component material description
The above 3 in one page.
Please provide function modules or classes or methods for this requirment.
Thanks
Suresh Thota

Hi Suresh Thota,
When you have to display an ABAP list along with GUI controls, you have to use a docking control aside the ABAP list (dynpro SAPMSSY0 0120 ), at the top, left, right, or bottom. In this docking control, you'll place a splitter container to make 2 containers in which you'll place the ALV grid controls. You could also use 2 docking controls (one by ALV grid) but I think it won't be very nice.
The docking control should be instantiated during the generation of the ABAP list. As you need to use ALV list , you should implement it during an event, for example the END_OF_LIST event.
Creating each required component has been discussed many times in the forum, and there are also demo programs. Tell us where you need more help.
BR
Sandra

ALV Grid and ALV List difference?

Similar Messages

Maybe you are looking for