ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload
Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin
Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin
Similar Messages
-
Desktop Office Integration in SAP GUI for HTML - dont works?
Hello all,
my program reads an Excel-File with multiple Worksheets into SAP by using class:
CL_GUI_CUSTOM_CONTAINER
and intefaces:
I_OI_CONTAINER_CONTROL,
I_OI_DOCUMENT_PROXY AND
I_OI_SPREADSHEET.
All works fine, but when I integrated the SAP Transaction into our Portal and using the Program through the WEBGUI it dont works.
It looks like that he can't create a container Control, to open the File in Background in Excel.
I worked with Desktop Office Integration to read all Worksheets into SAP, like here:
http://abap-explorer.blogspot.com/2008/12/upload-data-from-multiple-worksheets-of.html
Is there any solution to solve my problem?
it returns me this message
"Cannot initialize control"
It seems that the error comes from this Method in Webgui:
Data iref_document type ref to i_oi_document_proxy.
call method iref_document->open_document
exporting
document_title = 'Excel'
document_url = v_document_url
open_inplace = 'X'
importing
error = iref_error.
if iref_error->has_failed = 'X'.
call method iref_error->raise_message
exporting
type = 'I'.
leave list-processing.
exit.
endif.
I hope someone can help me.
Thanks.
EDIT:
Today I tested the ABAP Report SAPRDEMOOFFICEINTEGRATION in our webgui
it returns me this error:
In dem Programm "C_OI_CONTAINER_CONTROL_CREATORCP" wurde durch eine
RAISE-Anweisung die Exception
(Ausnahmebedingung) "JAVABEANNOTSUPPORTED" ausgelöst.
Da die Exception nicht durch ein in der Aufrufhierarchie
Auslösestelle des Laufzeitfehlers
Programm C_OI_CONTAINER_CONTROL_CREATORCP
Include OFFICEINTEGRATIONDCCIMP
Zeile 70
Modultyp (METHOD)
Modulname I_OI_CONTAINER_CONTROL~INIT_CONTROL
Edited by: Sascha Baumann on Jul 15, 2009 9:18 AM
Edited by: Sascha Baumann on Jul 16, 2009 8:04 AMHi Sascha,
I have the same issue as yours.
Did you find a way to open your excel file in the WebGui?
Regards, -
SSO E-Sourcing and SAP GUI for HTML
Hi,
We are trying to provide integration between SAP E-Sourcing and SAP ECC via the SAP GUI for HTML. From an E-Sourcing project, we should define a link which will link us to the report via SAP GUI for HTML. Some parameters are automatically transferred via the URL so that the report will be prefiltered.
The problem arises that we cannot create a SSO mechanism between SAP E-Sourcing and SAP GUI for HTML. The only documentation we can find is how to setup this SSO between the Portal and ESO (only included going from the EP to ESO). We need to find a way to do the opposite, i.e. SSO from ESO to SAP / EP.
Thnx,
BramDear Chong,
I have came across the following information about SAP GUI For HTML
With the version 7.02 / 7.20 of the NW Application Server
the SAP GUI for HTML has been completely
reworked.
1.The rendering is now based on Unified
Rendering which is also used by many other
SAP UI technologies.
2.Similar Look & Feel as other UI technologies
3.Better Portal integration
4.Full Theme support
5.Unified client requirements
But have not came across any note which converts the SAP GUI for HTML to SAP GUI for Windows in appearacne. I think the point 2 mentioned about says that in this version the SAP GUI for HTML will have appearnce like the other UI.
Pls refer the [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06db80d-ebf4-2a10-6b99-faa652c69d5c?QuickLink=index&overridelayout=true]
Hope it helps.
Regards,
Samir -
WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView
Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
BertUse System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers -
The page cannot be displayed: ITS error: SAP GUI for HTML
Hello,
I have created an iView that connects with a ECC system. When I clic on System Administration --> Support --> SAP Application --> SAP Transaction :
System: ECC
Transaction: su01
SAP GUI Type: SAP GUI for HTML
It shows: The page cannot be displayed.
It's manadory to use SAP GUI for HTML. Please, Do you have any idea??
Thank you
Best,Hello Virginia Rodríguez,
1)Kindly check that System ECC in Portal is Up and Running under System Administration.
2) if u r done with first step then can try SAP GUI for Window in creation of Iview
it will Work.
Regards.
Soni Vinit -
Problem while printing from SAP GUI for HTML
Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
ReenaHi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal -
Accessing local clipboard with SAP GUI for HTML - alternatives?!?
I need some creative suggestions (PLEASE!!!) to a problem that weu2019re having replicating functionality that works in SAPGUI but which we canu2019t get working in SAP GUI for HTML.
In SAPGUI we are able to open an external browser and pass a URL for the page we want to open. Once the page is open the user enters some data and receives a response which we then copy to the local workstation clipboard. From within ABAP we then read the clipboard contents and then copy them in to a field in the SAP screen. It works BRILLIANTLY!
However, Iu2019m not able to get the same functionality to work in SAP GUI for HTML with method CLIPBOARD_IMPORT of CL_GUI_FRONTEND_SERVICES. Apparently this class and the methods can not be used in SAP GUI for HTML u2013 however OSS note 314568 seems to suggest otherwise with this statement:
Clipboard access
In SAP GUI for HTML it is not possible to:
- read or write the clipboard using ABAP Objects class CL_GUI_FRONTEND_SERVICES.
This limitation no longer exists with ITS 6.20 Patch 23, SAP Netweaver 2004 SP 19 and SAP Netweaver 2004s SP 10.
Has anyone been able to use the class CL_GUI_FRONTEND_SERVICES to read from the Clipboard since this statement was made in this OSS note?
And my bigger question u2013 does anyone have a creative idea for a solution that will work?Thank you experts,
Your answers have been really helpfull, we have to try another method, by Studio Program or ABAP code, unfortunely we have to implement this in so many computers, so is impossible to configure one by one.
Thanks to both, and have a nice 2009!
Ricardo Pineda
Edited by: Ricardo Pineda on Jan 13, 2009 2:09 AM -
Transaction iView - SAP GUI for HTML - Problem while hiding menu bar
Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its -><b>webgui</b>
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
ReenaHello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb -
Transaction iView - SAP GUI for HTML-blank on some systems
Hi,
I have few transaction iviews - SAP GUI for HTML running perfectly well on few systems. But the same iViews fail to load in few other systems. A blank iview is displayed. What could the problem be?
Thanks and Regards,
ReenaHi Reena,
Have a look at the product availability matrix:
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
IE 7.0 may have some problems if using it with ITS. Ensure that IE are all on the same version (6.0 for example) and the same service pack. We have everyone using IE 6.0.2800.1106 and it works fine now.
Regards,
Nick. -
Hi SDN
I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
Thanks in advance.
Regards
BashaHi Basha,
Try this in the browser:
http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
1) It will ask for the username and password
2) Enter the credentials and it should directly take you to the VA01 transaction
If it fails again, try this:
http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
Thanks,
Sathya -
Hello All,
I have transaction iViews on the portal and I am using SAP GUI for HTML. Upon launching this iView, i get the logon page, even though I have SSO set up and working fine.
Now, the problem is, even after logging on with qualified credentials, the logon page disappears, 'Logon is starting' appears then the logon page reappears, as if nothing happened.
Any ideas as to why this is happening and how I can fix it?
Regards,
MotazEdgar: The ITS is working and the service launches successfully through the GUI.
I overcame the issue by using SAP GUI for Windows instead. I guess there is a problem when using the HTML GUI from a public IP. Something to do with security or a conflict in the 'hosts' file.
Regards,
Motaz -
Hi Everyone,
My Requirement is Endusers needs to access applications from portal using SAP GUI For HTML.
Because Some users in site or remote place they need Need to access applications.
The Problem With SAP GUI For Windows it requires SAP GUI S/W Every Workstation.
Before What i requires and what approach should i follow.
What i will do in Portal,ITS And WAS.
Please Do Needful.
Thanks
SubbaRao ChintaHi Sarkar,
I Follow Your Article.i created service under its in ecc and activate the service.
and login portal and created sap IAC iview.after i click on preview
i got the error below
The following error text was processed in the system ECC : System error
The error occurred on the application server epsap05_ECC_15 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSU
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ECC in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server epsap05_ECC_15 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then yo
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
What Can i DO for enabling Apllications Through SAP GUI.
Thanks
SubbaRao -
Hello Everyone,
I have successfully implemented XSS on our portal. Also, UWL is configured and working correctly. However, upon trying to access SAP GUI for HTML through the UWL, I get an error. This is an example of an error:
Transaction SWNWIEX+CURRENTWINDO is unknown
This is when clicking the link of a PCR request in the tracking tab of the UWL. It opens SAP GUI for HTML in a new window using the UWL - Launch SAP Transaction iView.
Does anyone have any idea why this happens?
Regards,
MotazHello Motaz,
First of all, you are welcome to join the ITS/WEBGUI forum [here|Internet Transaction Server (ITS);.
About your issue, I am not sure about the SAP_BASIS version of your system, but maybe SAP note 1360904 is the solution!
At last, but not least, you may find [this Wiki article|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22375] interesting.
I hope this helps.
Best regards,
Cristiano -
Connect to SAP R/3 using SAP GUI for HTML through saprouter
Hello,
I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string, but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
Thanks in advance.thanks, I can get the data from SAP R/3 to crystal report.
but still dont know how to do the second question mentioned in previous message:
once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted. -
Report painter report in portal - Excel output in SAP GUI for HTML
Dear sirs,
I need your expertize. I would like to let my users display (Excel in place)/ save the result of my report painter reports into MS Excel. I have found notes 499262 a 314568, but didn´t understand the message (or there is no message:)). Does that mean I cannot use Excel in place together with Report painter and SAP GUI for HTML?
Second question: is there a place (user exit in generated code? I don´t even know what I am looking for) to get the data provided by the report painter engine and send the retrieved data to some custom function (to be able to call the Adobe form, to save it as a text file or any option how to manipulate the resulting data...?).
thank you for your time and effort,
regards OttoHi Otto,
You can send print the report to the spool and then use RSTXPDFT4 program to convert this spool to PDF file. Alternatively, you can export the spool to spreadsheet or ASCII file via SP01 transaction.
Additinally, I'm not aware of unability to use Excel output with SAP GUI interface.
Regards,
Eli
Maybe you are looking for
-
How to position the Stage at the first available place on the screen
Im creating a Stage, but for any reason when I dont define x,y it shows in different places on the screen, and sometimes outside of the screen if I set x=0 and y=0 I have problems, because some user, like me, use the taskbar on the top of the screen,
-
How to completely uninstall clean my mac
I have already uninstalled clean my mac, not just thowing to the trash. But here just show it's still in the computer, what's happen? 29/3/14 8:23:02.552 pm com.apple.launchd.peruser.501[207]: (com.macpaw.CleanMyMac2Helper.trashWatcher) Throttling re
-
File upload applet recommendations
Greetings, We are building a large-scale extranet that will heavily involve user uploads of various files, including potentially large videos. In the past we've just used file fields and handled the stream with cffile and cfftp. However, we are think
-
Page Default Options for LaserJet 4000N
Greetings! Does anyone know of a way to change the default to print "Page 1 of 1" (or even "Current Page") on a LaserJet 4000N? HP has NOT been helpful in answering this question; so, I'm turning toward users. Help!? We'd like to print anything but
-
Hi All, I am designing a database. But there is no such field so that i can consider it as primary key. so is there anything in sap which auto-generates a unique which will act as a primary key for that table? As far I know there is a autogenerated f