Alv grid display regarding

hi all,
i have an issue in which i fetch data from mkpf and mseg tables into my final internal table everytin is fine and i want to display the data in alv and download it to excel sheet so the problem is while im running the prog im gettin an error in reuse_alv_list_display the code is as follows:
it_final_tab is my final internal table
wt_fieldcat is for building field catalog
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM     = wlv_repid
   IS_LAYOUT                         = wls_layout
   IT_FIELDCAT                       = wt_fieldcat[]
   I_DEFAULT                         = 'X'
   I_SAVE                               = 'X'
   IT_EVENTS                         = wlt_events[]
TABLES
    T_OUTTAB                          = it_final_tab[]
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
the error is "field string is not yet set". its eatin my brain so can any one plz help me out. Point are rewarded for correct solution
thanks in advance
anupama.

Hi Anupama,
Fieldcatalog information through your internal table wt_fieldcat[]
is not being passed properly. That is causing the problem.
Can I have ur fullcode so that we can check it out. Otherwise refer sample code on ALV grid.
REPORT zvenkat_alv_grid.
TABLES:t001.
"Types
TYPES:
 BEGIN OF t_1001,
 bukrs TYPE t001-bukrs,
 butxt TYPE t001-butxt,
 ort01 TYPE t001-ort01,
 land1 TYPE t001-land1,
 END OF t_1001.
"Work area
DATA:
 w_t001 TYPE t_1001.
"Internal table
DATA:
 i_t001 TYPE STANDARD TABLE OF t_1001.
" ALV Declarations
* Types Pools
TYPE-POOLS:
 slis.
* Types
TYPES:
 t_fieldcat TYPE slis_fieldcat_alv,
 t_events TYPE slis_alv_event,
 t_layout TYPE slis_layout_alv.
* Workareas
DATA:
 w_fieldcat TYPE t_fieldcat,
 w_events TYPE t_events,
 w_layout TYPE t_layout.
* Internal Tables
DATA:
 i_fieldcat TYPE STANDARD TABLE OF t_fieldcat,
 i_events TYPE STANDARD TABLE OF t_events.
*& start of selection
START-OF-SELECTION.
PERFORM get_data.
*& end-of-selection.
END-OF-SELECTION.
PERFORM build_fieldcatlog.
PERFORM build_events.
PERFORM build_layout.
PERFORM list_display.
*& Form get_data
FORM get_data .
SELECT bukrs
 butxt
 ort01
 land1
 FROM t001
 INTO TABLE i_t001
 UP TO 30 ROWS.
ENDFORM. " get_data
*& Form build_fieldcatlog
FORM build_fieldcatlog .
CLEAR:w_fieldcat,i_fieldcat[].
PERFORM build_fcatalog USING:
 'BUKRS' 'I_T001' 'BUKRS',
 'BUTXT' 'I_T001' 'BUTXT',
 'ORT01' 'I_T001' 'ORT01',
 'LAND1' 'I_T001' 'LAND1'.
ENDFORM. "BUILD_FIELDCATLOG
*& Form BUILD_FCATALOG
FORM build_fcatalog USING l_field l_tab l_text.
w_fieldcat-fieldname = l_field.
w_fieldcat-tabname = l_tab.
w_fieldcat-seltext_m = l_text.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " build_fieldcatlog
*& Form build_events
* text
FORM build_events.
CLEAR :
 w_events, i_events[].
w_events-name = 'TOP_OF_PAGE'."Event Name
w_events-form = 'TOP_OF_PAGE'."Callback event subroutine
APPEND w_events TO i_events.
CLEAR w_events.
ENDFORM. "build_events
*& Form build_layout
FORM build_layout .
w_layout-colwidth_optimize = 'X'.
w_layout-zebra = 'X'.
ENDFORM. " build_layout
*& Form list_display
FORM list_display .
DATA:
 l_program TYPE sy-repid.
l_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = l_program
 is_layout = w_layout
 it_fieldcat = i_fieldcat
 it_events = i_events
 TABLES
 t_outtab = i_t001
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " list_display
*& Form top_of_page
FORM top_of_page.
DATA :
 li_header TYPE slis_t_listheader,
 w_header LIKE LINE OF li_header.
DATA:
 l_date TYPE char10.
WRITE sy-datum TO l_date.
w_header-typ = 'H'.
CONCATENATE sy-repid ':' 'From Date' l_date INTO w_header-info SEPARATED BY space.
APPEND w_header TO li_header.
CLEAR w_header.
w_header-typ = 'S'.
w_header-info = sy-title.
APPEND w_header TO li_header.
CLEAR w_header.
w_header-typ = 'A'.
w_header-info = sy-uname.
APPEND w_header TO li_header.
CLEAR w_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = li_header.
ENDFORM. "top_of_page
I hope that it helps you.
Regards,
Venkat.O

Similar Messages

Regarding output using alv grid display

Hi experts,
    i have a program
FS_TAB1-A = P_T1.
IF P_T1 = 0.
TEMP1 = 1.
DO TEMP1 TIMES.
    FS_TAB1-A = P_T1 * DUMMY1.
    APPEND FS_TAB1 TO T_TAB1.
    DUMMY1 = DUMMY1 + 1.
ENDDO.
now i have to diplay the p_t1*dummy1 using alv grid display like it goes into thew loop for ten times then i have to show it 10 times like
10 1 102 103 104 111 112 like that can u help me

hi,
    you have to get the result of the multiplication at each row and then concatenate the result and the factor to show the final result in multiples value and multiplication factor...

Kindly help to develop alv grid display

Hi ,
I have a requirement in which I need to display ALV GRID display and in its tool bar 4 butons are required. In the same view down to alv display i want to develop a tabstrip and its functionalities.I have designed classic alv using SALV_WD_TABLE component. I want a good GRID Display, not like flat field names that comes in list display, looking for bulged fields(like what comes for ALV GRID in normal abap) display with print version etc hidden and buttons at the top of ALV. Kindly help
Highly rewarded
Kindly help
Regards,
Lakshmi
Edited by: Lakshmi Menon on Nov 27, 2008 4:49 PM

Well Web Dynpro is generally output in HTML so the output formatting is never going to quite look like a desktop application (which is the case with the ALV Grid). You have very little control over the look of the column headers. In fact you can only manipulate what is available via the Portal Theme.
There is a new Tradeshow Plus theme available in NetWeaver 7.01 which uses a gradiant background for the column headers. This gives them a little more depth:
http://www.flickr.com/photos/tjung/3068850120/
The other option is next year when NetWeaver Business Client version 3.0 comes out, you will be able to render Web Dynpro applications using the NWBC Smart Client Rendering. This will render Web Dynpro applications using desktop libraries instead of HTML/Browser. This gives Web Dynpro a more SAPGUI/Desktop appears of course.
http://www.flickr.com/photos/tjung/2685619882/in/set-72157606418550143/

Folder in alv grid display report

Hi Experts,
I have a requirement to generate the folder in alv grid display, to display the multiple line items where ever we have.
Actually I am displaying the material details and production order details.
If the material is having the multiple production order details , in that case we need to place all the production order details in one folder, and if you open that folder arrow, we have to display the production order details.
I am using REUSE_ALV_GRID_DISPLAY function module to develope this application. Here Hierseq list is recommended to use for this application, why because folder option is already available in grid display. that we can observe in CL6AN.
Is it possible to implement it through function modules or through OOABAP.
Actually, I have to generate the report which we can see in CL6AN Transaction code,,
Your valuable suggestions surely will attract the benifits.
Thanks in advance.
Ramesh.

Hi ramesh,
Hierseq list is not supported in the grid display. You could do this using an OO tree display but this could be rather complicated. What about displaying one field per material line with the number of production orders. At double-click on that field, open a second grid display (possibly as popup) to show the production order details.
Regards,
Clemens

Currency field in alv grid display

Hi,
I am using alv grid display.I am having one currency field netprice.I want it to be displayed as blank when i am not passing any value.But it gives 0.00 when it is not having any value.How to make it blank instead of 0.00.
Points will be rewarded.
Regards,
Sowmya.

HI,
If itab-curr = '0.00' .
itab-curr = ''.
modify itab.
endif.

Dump when summing up CURR field in ALV GRID display

Hi All,
I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23. I am using classes and methods to display alv grid.
I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
Here is the part it is throwing dump:
 ls_lvc_data-value = space.
 clear ls_lvc_data-style.
 loop at it_fcat_local assigning <ls_fcat>
 where tech ne 'X' and no_out ne 'X'.
 if l_invisible eq 'X'.
 clear l_invisible.
 if <ls_fcat>-do_sum is initial.
 continue.
 else.
 clear ls_lvc_data-col_pos.
 endif.
 endif.
 add 1 to ls_lvc_data-col_pos.
 assign component <ls_fcat>-fieldname
 of structure <ls_data> to <l_field_value>.
 _if sy-subrc ne 0.
 message x000(0k).
 endif._
Regards,
Guru

Thomas,
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/22/2010 23:30:53
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
2708
is_subtottxt_info = ls_subtot_info
2709
ip_subtot_line = lr_data
2710
changing
2711
c_subtottxt = l_subtottxt.
2712
ls_lvc_data-value = l_subtottxt.
2713
2714
append ls_lvc_data to ct_lvc_data.
2715
endif.
2716
2717
2718
Column per Fieldcat Entry
2719
2720
ls_lvc_data-value = space.
2721
clear ls_lvc_data-style.
2722
loop at it_fcat_local assigning <ls_fcat>
2723
where tech ne 'X' and no_out ne 'X'.
2724
if l_invisible eq 'X'.
2725
clear l_invisible.
2726
if <ls_fcat>-do_sum is initial.
2727
continue.
2728
else.
2729
clear ls_lvc_data-col_pos.
2730
endif.
2731
endif.
2732
2733
add 1 to ls_lvc_data-col_pos.
2734
2735
assign component <ls_fcat>-fieldname
2736
of structure <ls_data> to <l_field_value>.
2737
if sy-subrc ne 0.
>>>>>
message x000(0k).
2739
endif.
2740
2741
*... work on average
2742
if <ls_fcat>-do_sum eq 'C'.
2743
 Initialize average result and entries
2744
<l_field_value> = 0.
2745
clear l_entries.
2746
2747
 retrive unit from fieldcatalog
2748
assign space to <l_unit>.
2749
if not <ls_fcat>-cfieldname is initial.
2750
assign component <ls_fcat>-cfieldname
2751
of structure <ls_data> to <l_unit>.
2752
endif.
2753
if not <ls_fcat>-qfieldname is initial.
2754
assign component <ls_fcat>-qfieldname
2755
of structure <ls_data> to <l_unit>.
2756
endif.
2757

Field Catolgue in alv grid display

Hi Abapers,
I need to display the percentage rows with decimals and other rows without decimal . Is their any option in field catalog to do like this. Or tell me any other alternative to achieve this.
sno total col1 col2 col3
1 220 100 20 100
2 320 120 50 150
tot 540 220 70 250
per 40.74 1.87 and so on
or ,
I have two different internal tables how can i put it in one field catalog to pass it to alv grid display.
Regards,
Priya

Don't do total by your self in the Pogram.
in the Fieldcatalog there is an Attribute which will do total & Average .
Enable it so that from one internal table data it self it will do good.
example program
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
 Data declaration
 Data retrieval
 Build fieldcatalog
 Build layout setup
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
 wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
 gd_tab_group type slis_t_sp_group_alv,
 gd_layout type slis_layout_alv,
 gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
 i_save = 'X'
* is_variant = z_template
 tables
 t_outtab = it_ekko
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
gowri
Message was edited by:
 Gowri Krishna

Row seperator in the ALV grid display after the various highest level prod.

Hi,
I have a requirement like user wants a row seperator against the various high level products (Each parent material)in ALV Grid display.We made this change but quantity and pricey fields showing the zero's in the blank line.i know that if we use NO-ZERO
in the ALV field catalog , we can remove the zero's from blank line. But other zerou2019s will remove from rest of the line items. User want's the zero's in other line items, but not in the blank line.
We can convert packed fileds into character format, but this will effect to the summing the quantity, price coumns.
If any body have idea on above mentioned.
Regards,
SK.

Hi Suresh,
There is no short cut for this requirement. You have to do following steps.
1. Change the data type of column to char.
2. Programatically find the totals.
Reagards,
Anversha

Field symbol has not yet been defined-ALV Grid Display in Report

Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O

How to capture the checkbox status in ALV Grid display

I need some immediate help regarding Grid ALV.
My Requirement: I need to display an ALV grid report along with checkboxes. Further, I need to provide an option wherein the user can checkboxes and select the records that I need to process further (by clicking the process button on the ALV Report).
My Query: The problem here is that I am not able to capture the status of the checkboxes. This means that I am not able to capture which of the records have been selected by checking their resp checkboxes.
Solutions that I have tried: I have tried capturing the same at user command by checking the value in slis_selfield. But all the records show the value as 1 for the checkbox field.
Kinldy suggest how to go about it.
I am not using Object Oriented ALV. Please suggest something to be used in ALV Grid display in 4.6C version.
Regards,
Namrata

Here is a Sample code , it might help you
TABLES : sflight.
TYPE-POOLS: slis.
DATA : w_repid LIKE sy-repid.
w_repid = sy-repid.
DATA: BEGIN OF it_sflight OCCURS 0,
checkbox(1),
carrid LIKE sflight-carrid,
END OF it_sflight.
*layout
DATA: wa_layout TYPE slis_layout_alv.
*field catalog
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
          wa_fieldcatalog TYPE slis_fieldcat_alv.
START-OF-SELECTION.
SELECT carrid FROM sflight
     INTO CORRESPONDING FIELDS OF TABLE it_sflight.
END-OF-SELECTION.
CLEAR it_fieldcatalog.
REFRESH it_fieldcatalog.
wa_fieldcatalog-fieldname = 'CHECKBOX'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m = 'Chk'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'CARRID'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m = 'Carrid'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = w_repid
      is_layout = wa_layout
      i_callback_user_command = 'USER_COMMAND'
      it_fieldcat = it_fieldcatalog
    TABLES
      t_outtab = it_sflight
    EXCEPTIONS
      program_error = 1
      OTHERS = 2.
*& Form USER_COMMAND
FORM user_command USING p_ucomm TYPE sy-ucomm
p_selfld TYPE slis_selfield.
CASE p_ucomm.
   WHEN '&DATA_SAVE'.
      DATA ref1 TYPE REF TO cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
         IMPORTING
           e_grid = ref1.
      CALL METHOD ref1->check_changed_data.
      LOOP AT it_sflight WHERE checkbox = 'X'.
         DELETE it_sflight INDEX sy-tabix.
      ENDLOOP.
      p_selfld-refresh = 'X'.
ENDCASE.
ENDFORM. "user_command

How to color a row in ALV grid display

Hi,
A few rows in the output of ALV grid display should be shown in different color.How can I achieve this?

Hi,
Try out this code
DATA : BEGIN OF G_T_CASH OCCURS 0,
 PARTICULARS TYPE CHAR120,
 AMOUNT1 TYPE CHAR20,
 AMOUNT2 TYPE CHAR20,
 AMOUNT3 TYPE CHAR20,
 ROW_COLOR TYPE CHAR4,----
add this in the internal table for alv
 END OF G_T_CASH.
CLEAR G_WA_CASH.
G_WA_CASH-PARTICULARS = 'Opening Cash Balance'.
G_WA_CASH-AMOUNT1 = G_DMBTR.
G_WA_CASH-AMOUNT2 = ''.
G_WA_CASH-AMOUNT3 = ''.
while appending other values also add the following code
G_WA_CASH-ROW_COLOR = 'C200'.----- C200 depicts light gray color
APPEND G_WA_CASH TO G_T_CASH.
add the following code in layout
MOVE 'ROW_COLOR' TO WA_LS_LAYOUT-INFO_FIELDNAME.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_BYPASSING_BUFFER = ' '
 I_SAVE = 'A'
 I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 IS_LAYOUT = WA_LS_LAYOUT
 IT_FIELDCAT = G_T_CATALOG
 IT_EVENTS = GT_EVENTS
 TABLES
 T_OUTTAB = G_T_CASH[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Let me know if the problem still persist.
Regards,
Janaki

How to give a page break in alv grid display after 65 lines are displayed?

hi all,
I need to give a page break in alv grid display after 65 lines are displayed on each page...Please help me with this...

hai
give this command beging of the report name... u have to diclar the beging of the report ......
report ( name of the report) standard page heading line-size 200 line-count 65.
ex1.:- report name is rtpm_trl_show_flows
report rtpm_trl_show_flows no standard page heading line-size 200
 line-count 65.
ex:2
report zlpur01 no standard page heading line-size 200
 line-count 65.
type-pools: slis.
tables: bkpf.
selection-screen begin of block sel with frame title text-001.
select-options: s_comp for bkpf-bukrs, " Company
 s_valut for bkpf-budat. " Invoice Date
 S_MTART FOR MARA-MTART. " Material Type
selection-screen end of block sel.
parameters: p_vari like disvariant-variant. " ALV Variant
constants: formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
data: i_bseg type bseg occurs 0 with header line.
data: vatval type p decimals 2 value '0.15'.
data: xhkont type string value '154000'.
data COM type c.
data: begin of invt occurs 100,
 budat like bkpf-budat, " Inv Dat
 bukrs like bkpf-bukrs, " Material
 STCEG like bsak-STCEG, "name of the companycode
 belnr like bkpf-belnr,
 xblnr like bkpf-xblnr, " Inv Reference
 ebeln like rseg-ebeln, " PO number
 lifnr like bseg-lifnr, " Vendor No
 name1 like lfa1-name1, " Supplier Name
 matnr like bseg-matnr,
 maktx like makt-maktx,
 stcd1 like lfa1-stcd1, " Supplier VAT REG NO
 xamt like bseg-dmbtr, " TAX amt
 yamt like bseg-wrbtr,
 wrbtr like bseg-wrbtr, " Base amount
 mwskz like bseg-mwskz,
 dmbtr like bseg-dmbtr, " TAX amt
 gjahr like bkpf-gjahr,
 hkont like bseg-hkont,
 zamt like bseg-dmbtr, " TAX amt
 wamt like bseg-dmbtr,
 shkzg like bseg-shkzg,
 shkzg1 like bseg-shkzg,
 end of invt.
regard
nawa

How to capture the event in ALV grid display?

Hi experts,
How to capture the event in an ALV grid display which is editable. I have to capture the TAB key or ENTER key.
regards,
Arul Jothi.

Hi Arul,
Take a look at sample program BCALV_EDIT_03. (Find string "register ENTER" in the program to see how to register)
Basically you have to Register edit events using method call REGISTER_EDIT_EVENT and then write a handler method for event DATA_CHANGED..
If you are using a REUSE..GRID fm then first get the grid reference using function module GET_GLOBALS_FROM_SLVC_FULLSCR and then repeat the above procedure..
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni

Error in field catalog in ALV grid display using classes at do_sum = "X'.

Hi,
I'm using classes in ALV Grid display.
the code for the field catalog is going to dump because of the statement in the field catalog for field 'netwr',do_sum = 'X'.
that do_sum = 'X' is not working and going to dump when executed.with out that do_sum it is working fine. the error in dump analysys is showing sap standard incude LSLVCF01.
 assign component
 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
 if sy-subrc ne 0.
 message x000(0k).
 endif.
sy-subrc is 4 when the program is being executed.
CODE:
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'VBELN1'.
ls_fcat-ref_field = 'VBELN'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Invoice No'.
ls_fcat-seltext = 'Invoice No'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUDAT'.
ls_fcat-ref_table = 'BKPF'.
ls_fcat-coltext = 'Invoice Date'.
ls_fcat-seltext = 'Invoice Date'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM.
can u please look in the code and rectify the error,
would appeciate ur response.
regards,
veera.

Hi,
try this..
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
ls_fcat-cfieldname = 'WAERS'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
Regards
vijay

Problem with ALV Grid display

Hi,
I have developed ALV Grid Report. It is working fine.
But while i am coming from alv grid display to program
by pressing BACK button it is showing one more screen
which is empty. Again I press back button it is coming to
selection screen. I don't want that empty screen.What is
the problem. Can u help me in this regard.?
Thanks
Narasimha

hi
under the usercommand of back button use Exit Statement
like
At user-comand
IF sy-ucom = 'Back'
EXIT
ENdif.
Cheers
Snehi

Alv grid display regarding

Similar Messages

Maybe you are looking for