ALV Grid Output to PDF
Hi All,
I have a report which displays the output in ALV Grid. I need to create a PDF from ALV output when the user clicks on a button. Using FM 'CONVERT_ABAPSPOOLJOB_2_PDF' i am able to acheive this.
But, as per my requirement if the user does any layout changes in the ALV output ( E.g. Sorting, Sub totaling ), it need to be captured and displayed in the PDF. Can you please tell me how can i get the values of changed ALV Grid Layout at the runtime?
Thanks & Regards,
Senthil.
Hi,
1) Get the Print parameters using this function GET_PRINT_PARAMETERS
2) Set the print parameters using the statement: NEW-PAGE PRINT ON PARAMETERS print_parameters NO DIALOG.
3) Generate the ALV Output using "REUSE_ALV_GRID_DISPLAY"
4) NEW-PAGE PRINT OFF.
5) Get the Spool request id from tsp01 using the user id and client
6) Pass the Spool id to the FM: CONVERT_ABAPSPOOLJOB_2_PDF
7) Then, Use the function "GUI_DOWNLOAD" to download the generated PDF.
Thanks & Regrads,
Senthil.
Edited by: senthil nathan on May 16, 2010 1:09 PM
Similar Messages
-
Send ALV Grid output as PDF attachment to external mail id?
Any solution on this please
Check SOST transaction for external email problem.Is it showing some error there or it has not started external send process.
If external send process has not started then follow below route :
Go to sost->eneter selection criteria -> utilities-> start send process
you are sending attachement as PDF ? or which type o document ?
Please check the type of document & whether it's been supported by application via which you are trying to view.
Re: Sending Email to external email address in Batch mode
Hope this explanation helps.
Message was edited by:
Karthikeyan Pandurangan -
Need to choose fields from alv grid output and send mail
Hi,
I need to choose few orders from alv grid output and send mail as PDF for chosen orders.
Suggest if possible and how.Moderator message - Please do not post your requirements and ask the forum to do your work for you - post locked
Rob -
F4 - Help for field in ALV Grid Output
Hi,
I generated a report which gives output in ALV Grid output.
In the output, 1 of the field is editable.Here, for this field I need to have my own F4-Help.
I think the procedure to be followed is:--
Create a Search Help in SE11.
Link the Search Help to the editable field.
Please let me know if its the correct procedure.
I f yes, how can I link user defined Search Help to the editable field?
Thanks,
Shivaa........Hi siva,
you can also do that way.
while filling the fieldcatalog use the parameter F4AVAILABL
for more info check
F4 help in ALV Grid...
f4 help for a field in alv grid
hope it helps you
Thanks!
Edited by: Prasanth on Mar 6, 2009 3:59 PM -
How to send the ALV GRID output to spool by using the print button in std t
How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.RamanaHi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
WHEN 'EXCEL'.
PERFORM excel_download.
WHEN 'PRI'.
PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
EXPORTING
columns = 80
device = 'ANY '
lines = 65
maxpenality = 1999
TABLES
layouts = lt_layouts1
EXCEPTIONS
unknown_device = 1
OTHERS = 2.
IF sy-subrc = 0.
LOOP AT lt_layouts1.
IF lt_layouts1-penality < 1000 AND
lt_layouts1-penality < l_min_penality.
l_layout = lt_layouts1-layout.
l_min_penality = lt_layouts1-penality.
ENDIF.
ENDLOOP.
IF NOT l_layout IS INITIAL.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
line_size = 80 "#EC *
new_list_id = l_new_list_id
no_dialog = l_no_dialog
layout = l_layout
IMPORTING
out_archive_parameters = rs_arc_params
out_parameters = rs_pri_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0. " INS SLIN
ENDIF. " INS SLIN
IF rs_pri_params-linsz LT 80 OR
rs_pri_params-linsz LT gt_stack-s_lprint-width.
gt_stack-print_line_break = 'X'.
ELSE.
CLEAR gt_stack-print_line_break.
ENDIF.
IF l_valid NE 'X'.
rs_pri_params = ls_pri_params_sav.
rs_arc_params = ls_arc_params_sav.
ENDIF.
ENDIF.
ENDIF.
endform. " Print_output
CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
EXPORTING
is_layout = gs_layout_cost_tot_grand
CHANGING
it_fieldcatalog = gt_fcat_cost_tot_grand[]
it_outtab = gt_cost_tot_grand[].
Please check my code -
In ME2N report for PO- How to get or add Vendor name in ALV grid output
Hl Everyone
How to get or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
cuurently i am in 4.7 E version.
Kindly suggest..........
thanks in advance
Regards
PrashanthHi Pankaj
I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
Kindly suggest
Regards
Prashanth -
How to download alv grid output(with field catalog) into excel file format
Hi all,
How to download alv grid output(with field catalogs) into excel file format and same file has to download to application server.
Please help.
Regards,
Satya.Hi,
On list where alv is displayed, select export icon( green color -> ),select spread sheet.
This will display records in Excel sheet. -
Hi,
I have one issue on ALV Grid output.
Some times we will not have any values to display in ALV Grid output.
In such cases we usually have to display 'No Data found' in report output message(Below report header).
How to acheive this as all my ALV grid fields are of less length.
Note: Message should be displayed below ALV Header (Where we usually get 1st record to be displayed).
What is the solution for the same!
Thanks,
Deep.Hello Deep,
You can try with,
MESSATE 'Data not Found' TYPE 'I'.
Bye
Gabriel P.- -
How to append ALV grid output to LIST output
Hi,
I am working with Basis AUDIT MANUAL report for which i have to integrate around 50 standard transactions (SM37,SM35...etc) output and make it into one single report.
On execution of my report i have to get all the 50 transaction outputs sequentially.
Some standard transactions have ALV list display output and some have GRID display.I can able to append only list outputs by submit program and exporting list to memory.
Please suggest me how to get Alv grid output in midst of list output.
Regards
Kalpana.You should post your question to the ABAP forum:
ABAP Development -
Push Button in Every record in ALV grid output
Dear Experts,
I need to print a push button in first column of every record in ALV grid output. How ?
No OOPS concepts please.
Thanks,
Siva.For this requirement, you have to copy the standard PF status of the ALV output. Do as below :-
1) Go to SE41
2) Enter the program name as SAPLKKBL
3) In the field status enter STANDARD_FULLSCREEN
4) Click on STATUS button on the application toolbar.
5) Enter the name of your Program & a new status name.
6) Click on COPY.
This way the standard status will be copied to the custom status & call the same status in your program using SET PF STATUS statement. Then double click on the custom status name & you will be navigated to SE41, there you can add you new button on the application tool bar & assign a function code, which you can program by enabling the export parameter I_CALLBACK_USER_COMMAND of the Function module REUSE_ALV_GRID_DISPLAY.
Just a sample code snippet for your reference :-
FORM USER_COMMAND USING L_UCOMM LIKE SY-UCOMM
LS_SELFIELD TYPE SLIS_SELFIELD.
CASE L_UCOMM.
WHEN 'your function code goes here'.
Do further processing.
This way you will have the standard PF status alongwith your button as well.
Edited by: Kumar Manas Mishra on Jan 29, 2010 1:03 PM -
Displaying the selected rows in ALV Grid output
Hi Experts,
I am developing one interactive ALV Grid report where user can process the selected records/rows from the ALV Grid output.
for displaying the ALV Grid, I have used the class CL_GUI_ALV_GRID class. I am working on ECC 6.0 system.
when I select any records/rows from output and then press any Application Toolbar button, PAI and then PBO modules of the screen gets executed as per the normal flow.
however After PBO, when same ALV output comes, all the selected/highlighted rows appear as unselected, that means I want to retain the ALV
rows selection during the round trip.
please advise.
Regards,
JageshHi,
Feiyun Wu is correct.
Get_selected_rows and set_selected_rows are the methods to be used .
Some code:
Note the sequence of code:
FORM set_gui_alv_grid_1 .
DATA: wa_layout TYPE lvc_s_layo ,
wa_print TYPE lvc_s_prnt .
DATA: it_sort TYPE lvc_t_sort ,
wa_sort TYPE LINE OF lvc_t_sort .
DATA: it_fieldcatalog TYPE lvc_t_fcat.
IF gui_custom_container_1 IS INITIAL .
CREATE OBJECT gui_custom_container_1
EXPORTING
container_name = 'GUI_CUSTOM_CONTAINER_1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6 .
IF sy-subrc <> 0.
ENDIF.
PERFORM get_field_catalog
USING gc_log_group_1
CHANGING it_fieldcatalog .
CREATE OBJECT gui_alv_grid_1
EXPORTING i_parent = gui_custom_container_1.
CREATE OBJECT ob_event_receiver_1
EXPORTING log_group = gc_log_group_1 .
* registers the event handlers
SET HANDLER ob_event_receiver_1->handle_toolbar FOR gui_alv_grid_1 .
SET HANDLER ob_event_receiver_1->handle_user_command FOR gui_alv_grid_1 .
SET HANDLER ob_event_receiver_1->print_top_of_page FOR gui_alv_grid_1 .
SET HANDLER ob_event_receiver_1->hotspot_click FOR gui_alv_grid_1 .
wa_layout-cwidth_opt = abap_true .
* wa_layout-excp_fname = gc_excp_fname .
* wa_layout-ctab_fname = gc_ctab_fname.
* wa_layout-excp_led = abap_true .
CALL METHOD gui_alv_grid_1->set_table_for_first_display
EXPORTING
is_layout = wa_layout
is_print = wa_print
i_save = 'A'
is_variant = gs_disvariant_1
CHANGING
it_sort = it_sort
it_fieldcatalog = it_fieldcatalog
it_outtab = it_alv_grid_1.
ELSE .
CALL METHOD gui_alv_grid_1->refresh_table_display.
* Restore selections
CALL METHOD gui_alv_grid_1->set_selected_rows
EXPORTING
it_index_rows = ob_event_receiver_1->it_rows.
* Restore position
CALL METHOD gui_alv_grid_1->set_scroll_info_via_id
EXPORTING
is_col_info = ob_event_receiver_1->wa_col
is_row_no = ob_event_receiver_1->wa_roid.
ENDIF.
ENDFORM . "set_gui_alv_grid_1
Regards. -
Hide a Column in ALV Grid Output
Hi,
I want to hide a column in ALV Grid Output through program.
I am using lwa_fieldcat-NO_OUT = 'X'. to hide the column in output but it is not working, column in not hided in the output.
Kindly suggest.It should work..
see the code :
d_fieldcat_wa-fieldname = 'MATNR'.
d_fieldcat_wa-seltext_l = 'material number'.
d_fieldcat_wa-no_out = 'X'. * hide particular field
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
if not please paste your code here.
Thanks
Seshu -
Hi guys,
I generated a report which gives out put in ALV grid.
In the ALV grid output, I have some editable fields.
Lets suppose, there are some editable fields with no data in it.
I have userdefined pushbutton in Application toolbar, when I press the pushbutton the cursor should go to the empty field in the ALV grid output.
Can this be possible through SET CURSOR statement?
Thanks,
Shivaa......Hi,
You can set the cursor field on the output list that too for the output fields which are vissible on the screen only.
syntax
SET CURSOR 11 3. ---> 11Coloumn and 3 line
for dynamically setting cursor, first you have to search for the empty fields then set the cursor dynamically.
look at this help document it might be helpful
http://help.sap.com/saphelp_nw70/helpdata/EN/9f/dba47e35c111d1829f0000e829fbfe/content.htm
Regards
Bala KRishna -
Hi,
I want show few line item informations in bold in ALV grid output.
Please let me know your suggestions.You may check the below links.
some methods to achieve this is mentioned out there.
Re: BOLD cell in ALV.
Re: ALV Row should apper in BOLD when order type is "ZSTP1" in the cloumn
Regards,
Anil -
Color in ALV grid output based on condition
Hi,
I have generated a ALV Grid output.
I have a internal table ITAB1. It has 2 fields - field1 and field2.
Now, my requirement is if field1 is 'X', the row should be colored in RED, else if field1 is 'Y', the row should be colored in GREEN.
How can it be done?
Thanks,
Shivaa.........Hi,
add another field in the internal table with the type of char04.
use the code given below....
DATA : begin of itab occurs 0,
field1(10) type c,
field2(10) type c,
color(4) type c,
end of itab.
" fetch records in itab..
loop at itab.
if itab-field1 = 'X'.
itab-color = 'C700'. " Trial and error to get the color you want...
elseif itab-field1 = 'Y'.
itab-color = 'C300'. " Trial and error to get the color you want...
endif.
endloop.
fs_fcat-fieldname = 'FIELD1'.
fs_fcat-col_pos = 1.
fs_fcat-coltext = 'FIRST FIELD'.
APPEND fs_fcat TO t_fcat.
fs_fcat-fieldname = 'FIELD2'.
fs_fcat-col_pos = 2.
fs_fcat-coltext = 'SECOND FIELD'.
APPEND fs_fcat TO t_fcat.
fs_layo-sel_mode = 'A'.
fs_layo-INFO_FNAME = 'COLOR'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
i_callback_program = sy_cprog
is_layout_lvc = fs_layo
it_fieldcat_lvc = t_fcat
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
This resolves you issue....
Cheers,
Siddarth
Maybe you are looking for
-
How do I use my iCloud??? I purchased 4 movies and 2 audio books from iTunes only to find out my iPad2 didn't have enough storage, so I purchased more storage from iCloud. My iTunes account only shows the 4 movies that need to still be downloaded (n
-
Can not open .pst file in Outlook
I can't open our Personal Folders file (.pst). The recovered by SacnPST folders are empty. How can I recover that files?
-
Secondary Index on Table having 0 record?
Dear All, Currently one of the SAP table, BKORM, has 0 records. When we execute statement "select * from BKORM" it fetches 0 record and took more than a minute. When we create secondary index, the same statement provides result in a second. My questi
-
How to run JprogressBar to view uploading status?
i know the file size and the current time but didnot finde the byte transfer rate. i am using these libraries import cz.dhl.ftp.Ftp; import cz.dhl.ftp.FtpConnect; import cz.dhl.ftp.FtpFile; import cz.dhl.io.CoFile; import cz.dhl.io.CoLoad; import cz.
-
Best way to set up 2 color job in Framemaker 10
What is the best way to set up a 2 color job in Framemaker 10 so that it converts to a 2 color job in the PDF? We have black with a blue PMS 280U book. However, if I select PMS 289U as my 2nd color in FM it outputs to PDF as the various CMYK percenta