Alv grid selectable with some files not selectable

Hi Experts,
I am working with a REUSE_ALV_GRID_DISPLAY.
I have a s_layout-box_fieldname to allow users select some lines.
But there are some lines that for some reason i do not want to allow them to select. Does anybody know how can I allow the users selectin some lines and some other lines not?
Thank you!

Hi Artur,
This is a known issue, but unfortunately there is no solution (other than issuing a message if a line has been selected which you didn't want the use to select).
Regards,
John.

Similar Messages

How to download alv grid output(with field catalog) into excel file format

Hi all,
How to download alv grid output(with field catalogs) into excel file format and same file has to download to application server.
Please help.
Regards,
Satya.

Hi,
On list where alv is displayed, select export icon( green color -> ),select spread sheet.
This will display records in Excel sheet.

Problem with some files with Adobe Audition 3.0

Hello everybody, I have a problem with some files. For example, when I open a .mp3 file, it says "The selected file it's not a supported file type". Instead, with other .mp3 files all works fine. What should I do? Thanks for the attention.

I strongly suggest - in fact this is probably the only thing you can do at this point - that you have a look at the FAQ here, and do exactly what it says.

Save ALV grid to local excel-file in background

Hi,
i want to save a alv grid to an excel-file on a local fileshare using an background job..
Does anybody know how this works?
Thanks ahead

DATA: file TYPE string VALUE `flights.dat`,
      wa   TYPE spfli.
FIELD-SYMBOLS TYPE x.
OPEN DATASET file FOR OUTPUT IN BINARY MODE.
SELECT *
       FROM spfli
       INTO wa.
ASSIGN wa TO CASTING.
TRANSFER TO file.
ENDSELECT.
CLOSE DATASET file.
<b>The binary data from database table SPFLI is transferred to a binary file flights.dat</b>

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

Troubles with xmp files not loading...

I'm having troubles with xmp files not loading with images but are present in the image folders. does anyone know why this is happening and if there is a way to fix this. Also when trying to load the xmp individually they are grayed out and unable to load. I have tried this on different machines (Macs) and still no luck. Any help would be greatly appreciated in this issue.

> The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
Aww, yuck!! That's a real drag...
When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
Guess I won't be using DNG any more..
Thanks for the help Kees :-)
Russell

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

IChat Video Audio: works with some iMacs not others

I have this strange problem.
I can chat with everyone.
I can video and audio with some but not all.
A person I can video or audio chat with can video and audio chat with our mutual friend.
I cannot video or audio chat with the mutual friend.
All machines are iMacs OS 10.4.10 with latest updates.
There was no problem until 2 weeks ago.
Does anyone have a suggestion as to how to solve this problem?
thank you in advance.

Presuming all have got their System Preferences > Quickitme > Streaming set to 1.5Mbps and restarted IChat then...
Change the way the ports are opened in the routing device
http://www.ralphjohnsuk.dsl.pipex.com/page15.html#CertainBuddy
5:02 PM Thursday; August 23, 2007

ISE upgrade failing with "% Manifest file not found in the bundle"

Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version      : 1.0.3.377
Build Date   : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
Saro

Same problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version      : 1.1.1.268
Build Date   : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version      : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version      : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version      : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version      : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz

Some images not selectable in grid view

Have recently installed Lightroom 5.6 on my Mac after deciding to ditch Apple Aperture. I have an issue where certain images are not selectable or do not highlight when moving the mouse pointer over them in grid view in the library module. The images have been imported only once direct from the camera & there is no issue selecting them in the filmstrip or accessing them in the Finder. I've found other posts with users experiencing similar issues but no one has offered an answer

Um, I can't seem to find it on the server, which can't be a good sign ) - :
Have no idea why it's not appearing where it should but if I can get a link to work I'll send it to you.
Thanks for your help

Canon 5D Mk II Raw files not selectable by Adobe DNG 5.5

Well to be more clear then the thread header, I am not able to select my old Nikon 5700 Coolpix files either. In other words the files are grey but the Adobe DNG browser is working when looking for file to select. I dropped the first download in the trash and downloaded again but same result.
I have CS4 and all software is listed as compatible with Canon 5D mkII files. A friend of my was able open my 5D files from Adobe DNG 5.5 that were on his Windows platform.
i did not see any special instructions, and seems intuitive enough, but it must be some kind of Adobe 101 question. Any ideas out there. Thanks.

Well sorry for any confusion here. I don't think my question is vary misleading though.
I have a MAC using OS 10.4.11. G4 Dual 1000 Gig (2002) processors, 1.5 Gb SDRAM (maxed), Dedicated 80 Gb Scratch Disk for Photoshop, 500 Gb Internal Drive.
All operations are done using the MAC OS.
All files are grey when viewed through the "Adobe DNG Converter 5.5" application browser. If you are familiar when you open Adobe DNG Converter the vary first step in the process is to ( 1. "Select Folder" ). Pressing this button opens a FINDER then if you will , (many applications refer this as using a their browser to locate files for opening).
I am referring to RAW files, and as stated earlier those from the 5D mk II and those from the Nikon coolpix 5700 are not available for selection, or opening by Adobe DNG Converter 5.5, yet they are listed as being current with DNG Converter 5.5.   "All files are grey", So none of the image files have black text suggesting you may select those.
My understanding is this converter was made for RAW files, not "jpeg", in hopes are creating a last RAW file format Standard that would be a usable archival format across mulitple platforms and through time   . The RAW files are Full 21 megapixel files, not the smaller files sizes of RAW available on the 5D (ie: sRAW1, or sRAW2). The DNG converter should open all 5D mk II RAW files regardless of megapixel size unless otherwise stated.
My files can not be an issue , because also stated was that my files were opened by a DNG converter loaded on a Windows platform.
Procedure performed as follows:
     - Open DNG Converter 5.5 on my Power MAC
     - Press " Select Folder " step number list as "#1"
     - DNG Finder or Browser opens allowing one to find the folder said RAW files are contained within for purpose of selecting full 21 megapixel RAW Format CR2 files for Conversion processing to a DNG file format.
     - Oops, can't select, files have grey text appearance. There are no image files at all with Black Text of any format available for selection, so can't select.
Adobe Photoshop CS4, Adobe CS4 Bridge, Adobe Camera RAW, Canon Utility package for the 5D mk II all these applications see the files, and function with them, no crashes, not hang ups, a little slower then the world turns now days but they do what they were meant to do.
Thanks again.

Web Dynpro ALV grid navigation problems when entry is selected

Hi,
We have implemented support packs 19 and 20 and following this, we are having the following side effect :
When you click on an entry within an alv grid, it does not navigate to the next screen. It worked fine before the service packs, please advise if you have any suggestions as to how we can get it to work again!? Thanks in advance.
When I click, the debug does not event go to the ON_LEAD_SELECT event.
Edited by: James Wilson on Dec 10, 2009 3:52 PM

Hi Samir,
I think possibly you have other code which is relying on a lead selection being set in the context that you have provided to the ALV grid?
And it is that code that is falling over?
In this case I think you need to handle in that other code the possibility that the user/ALV grid will unselect all entries in the table.
Or am I misunderstanding your issue? Please do let us know,
Thanks,
Chris

ALV Grid OO : Set Field editable for selected rows

Hello ABAPers,
I used object cl_gui_alv_grid to created ALV grid and i succed to set an editable
field for all rows. However my request is to set it for and only for selected rows
I could get the row index but i didn't know how to use it
Thanks in advance
Amine

Hi Amine,
I think the standard SAP sample program might help you, BCALV_EDIT_02.
I will tell the procedure to make the selected rows editable on ALV.
1. Add a additional field of type LVC_T_STYL in the internal table that you are displaying in the ALV. LVC_T_STYL is a actually a table type.
2. Place a button on the ALV toolbar for EDIT/DISPLAY.
3. Once you press the EDIT button after selecting the rows, loop through the records which you have selected (you have already said that you have the index of selected records).
4. The table type LVC_T_STYL has fields for FIELDNAME and STYLE.
If you have 10 fields in the internal table, then all these ten fields name should be appended to the newly added field in the internal table (LVC_T_STYL) and their style should be populated with value cl_gui_alv_grid=>mc_style_enabled.
Regards,
Rahul MB

SOLVED: Some files not being picked up with File: protocol

Hello all,
I'm doing some testing of the B2B server on a laptop and seeing some weird behaviour. I have the B2B server set up much like the 850 inbound scenario for the tutorial, except that I am using AS2 over generic exchange with a FILE: transport server. I have "Shoppers" set up as the remote trading partner.
Now for the weirdness. If I put a file in the incoming directory called "ACME_850_4010_1_12345.edi" (it's the one I used for the tutorial, it is picked up fine by the B2B server; it errors out (as expected) because I don't have a trading partner called "ACME" in my setup. However, if I drop a file in the incoming directory called "Shoppers_850_4010_1_12345.edi" with the same exact content as the ACME file - the B2B server never picks up the file to process it. The other weird thing - after putting the Shoppers file in the directory, the B2B server just stops picking up files from that directory altogether until I restart the B2B server.
Any ideas?
DOH - files were not exactly the same. Missing carriage return at the end of the file. Adding it seems to have solved the issue.
Best regards,
John

Hello John,
Trading Partner identification by default is based on the Exchange protocol and in your case of Generic Exchange , it is based on name of the file or the Directory name depending on the following property.
Property:           oracle.tip.adapter.b2b.allTPInOneDirectory
Type:           boolean
Default Value:      false
Description:
If set to true, enables the identification of all files dropped into a particular directory with the trading partner name identified by the directory name: Example: E:\Partners\Acme
The default is to identity each file by prefixing the file with the Trading Partner name Example: Acme_orders.xml
To debug this issue, please enable transport trace and go through the log.
Rgds,Ramesh

Alv grid selectable with some files not selectable

Similar Messages

Maybe you are looking for