ALV Grid Using Methods-handle_top_of_page
riends please explain how to resolve the below issue.
I am working on ALV Grid using methods & trying to display
page heading using handle_top_of_page event.
I have defined & implemented the above method and in the implementation I have
given a write statement, which has to be displayed on the top of page.
I have also set the handler for top of page.
The program does not have any errors, but top of page event is not triggered, what might be the problem.
Regards,
Usha
Hi,
Check this code
Class definition :
CLASS v_lcl_event_receiver DEFINITION
CLASS v_lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_print_top_of_page FOR EVENT print_top_of_page OF
cl_gui_alv_grid,
handle_top_of_page FOR EVENT top_of_page OF
cl_gui_alv_grid.
ENDCLASS.
CLASS V_LCL_EVENT_RECEIVER IMPLEMENTATION
CLASS v_lcl_event_receiver IMPLEMENTATION.
METHOD handle_print_top_of_page.
IF sy-pagno = 1.
PERFORM top_of_page.
ENDIF.
ENDMETHOD.
METHOD handle_top_of_page.
PERFORM top_of_page.
ENDMETHOD.
ENDCLASS.
DATA: v_event_receiver TYPE REF TO v_lcl_event_receiver.
FORM top_of_page.
WRITE: text-020,
ENDFORM. " top_of_page
In PBo of the screen
DATA: v_split TYPE REF TO cl_gui_easy_splitter_container,
v_contnr_top TYPE REF TO cl_gui_container,
v_contnr_bot TYPE REF TO cl_gui_container,
v_grid_02 TYPE REF TO cl_gui_alv_grid,
v_html TYPE REF TO cl_dd_document,
v_text20(255) TYPE c,
v_text16(255) TYPE c,
FORM f9000_objects_create.
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
Create a container
CREATE OBJECT o_dockingcontainer
EXPORTING
ratio = '95'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-e01."Error in creating Docking container
LEAVE LIST-PROCESSING.
ENDIF.
CREATE OBJECT v_split
EXPORTING
parent = o_dockingcontainer
ORIENTATION = 0
sash_position = 25
with_border = 0
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
others = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-e01."Error in creating Docking container
LEAVE LIST-PROCESSING.
ENDIF.
Get the containers of the splitter control
v_contnr_top = v_split->top_left_container.
v_contnr_bot = v_split->bottom_right_container.
CREATE OBJECT o_alvgrid
EXPORTING
i_parent = o_dockingcontainer.
Create an instance of alv control
CREATE OBJECT o_alvgrid
EXPORTING i_parent = v_contnr_bot.
Object for display of selection parameters in HTML top container
CREATE OBJECT v_html
EXPORTING
style = 'ALV_GRID'.
Must be after the SET HANDLER for TOP_OF_PAGE and foreground only
CALL METHOD o_alvgrid->list_processing_events
EXPORTING i_event_name = 'TOP_OF_PAGE'
i_dyndoc_id = v_html.
v_text20 = text-020(summary Record counts)Any text.
CALL METHOD v_html->add_gap
EXPORTING
width = 120.
CALL METHOD v_html->add_text
EXPORTING
text = v_text20.
CALL METHOD v_html->new_line.
Display Text-016
v_text16 = text-016.
CALL METHOD v_html->add_gap
EXPORTING
width = 1.
CALL METHOD v_html->add_text
EXPORTING
text = v_text16.
v_text16 = v_sap_recon.
CALL METHOD v_html->add_gap
EXPORTING
width = 1.
CALL METHOD v_html->add_text
EXPORTING
text = v_text16.
CALL METHOD v_html->new_line.
Display the data
CALL METHOD v_html->display_document
EXPORTING
parent = v_contnr_top.
Handle the event
CALL METHOD o_alvgrid->list_processing_events
EXPORTING i_event_name = 'PRINT_TOP_OF_PAGE'.
IN PBO while populating in the output table
FORM f9004_display_data TABLES p_report_tab
p_fieldcat.
CALL METHOD o_alvgrid->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = c_a
is_layout = w_layout
CHANGING
it_outtab = p_report_tab[]
it_fieldcatalog = p_fieldcat[]
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i000 WITH text-e06."Error in ALV report display
LEAVE LIST-PROCESSING.
ENDIF.
Create object
IF v_event_receiver IS INITIAL.
CREATE OBJECT v_event_receiver.
ENDIF.
SET HANDLER v_event_receiver->handle_print_top_of_page FOR o_alvgrid.
SET HANDLER v_event_receiver->handle_top_of_page FOR o_alvgrid.
Hope this helps.
Similar Messages
-
Possible to have vertical scroll bar for a cell in ALV Grid (using methods)
Hi All,
I have a field with length 100 characters on a ALV Grid (using methods)..User doesn't want to scroll all the 100 characters horizontally to see the whole text rather he wants to have a vertical scroll bar for the cell so that he can scroll vertically.
Is it possible to have split the cell text into lines and have a vertical scroll bar for a cell in ALV Grid?
Regards
Jaker.Thanks for the suggestion Balu.I tried this , but while scrolling,headers also getting scrolled.
Becoz of this , if i scroll down to the last row,headers are getting hidden.
Headers should always be static.only the data should scroll.
Since h:datatable is being rendered as one table , i can div tag for this table alone.
If i have seperate datatable for headers alone i can do this .But i should not use two datatables. -
ALV grid using methods: how to get modified cells
Hi all,
IAM USING alv grid using methods,
i have few fields as editable
if the user edits any of those fields how can i know which cell is modified and what is the new value.
i tried to use method get_modified_cells
but iam getting a msg saying protected method and u can not use.
please advise.
thanks
JAfarJafar,
You need to Take the Help of DATA_CHANGED event, when ever there is a change in the Grid, it will trigger, here you can capture the Cells which are modified.
in your PAI call the method check changed data
CL_GUI_ALV_GRID-->CHECK_CHANGED_DATA
You need to set the handler for datachanged.
set the handler for this, and register the event modified or enter.
**Handler to Check the Data Change
HANDLE_DATA_CHANGED FOR EVENT DATA_CHANGED
OF CL_GUI_ALV_GRID
IMPORTING ER_DATA_CHANGED
E_ONF4
E_ONF4_BEFORE
E_ONF4_AFTER,
**Handle Data Change
METHOD HANDLE_DATA_CHANGED.
DATA: X_CHANGE TYPE LVC_S_MODI. "modified cells
LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO X_CHANGE.
ENDLOOP.
ENDMETHOD. "HANDLE_DATA_CHANGED
Regards
Vijay -
How to make a field manadatory within ALV Grid using methods and classes
Hi,
I am using ALV Grid using set_table_for_first_display
inside my dialog programming. I have a field called project number inside my grid which has to be made as mandatory field.
I have defined a method called catch_data_changed inside my class lcl_event_receiver. This method captures the changes made to one of the fields inside my ALV grid and displays all the default values of the other fields from the grid.
Now, i have to make project number which is one of my fields inside my ALV grid as mandatory. At the field catalog level i did not find any such option for making a field as required field.
Is there any other way, i can accomplish this within the ALV grid?from my understanding from ur question, i understood that u want the editable field inside alvgrid to be mandatory.
i dont know anthing in fieldcat, but u can try the following logic.
FORM DATA_CHANGED USING P_ER_DATA_CHANGED TYPE REF TO
CL_ALV_CHANGED_DATA_PROTOCOL .
DATA: L_VALUE TYPE LVC_VALUE,
ls_mod_cell type lvc_s_modi.
READ TABLE P_ER_DATA_CHANGED->MT_MOD_CELLS INTO LS_MOD_CELL.
if sy-subrc = 0.
CALL METHOD P_ER_DATA_CHANGED->GET_CELL_VALUE
EXPORTING
I_ROW_ID = LS_MOD_CELL-row_id
I_FIELDNAME = LS_MOD_CELL-fieldname
IMPORTING
E_VALUE = L_VALUE.
IF LS_MOD_CELL-FIELDNAME <> 'fieldname what u want'
MESSAGE 'ENTER VALUE INTO (fieldname u want) ' TYPE 'I'.
ENDIF.
ELSE.
MESSAGE 'ENTER VALUE INTO (fieldname u want) ' TYPE 'I'.
ENDIF. -
Displaying items in a single line in ALV grid using ALV_TOP_OF_PAGE.
Hello Guys,
I am having a problem in displaying items in a single line in the ALV Grid using event ALV_TOP_OF_PAGE.
My requirement is to group items on a single line i.e. in the example below, Vendor code and posting date are on the same line. The next line the prints Vendor Name and Document no.
Vendor Code: 123123 Posting Date : 01.01.2011
Vendor Name: ABCD Document No: 152246598.
Here is my code in subroutine 'ALV_TOP_OF_PAGE',
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Vendor Code'.
APPEND wa_list_comments TO it_list_comments.
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Posting Date'.
APPEND wa_list_comments TO it_list_comments.
The above code prints in the following format i.e one below the other,
Vendor Code: 123123
Posting Date : 01.01.2011.
I also tried using HTML_TOP_OF_PAGE, but it didn't work.
Can anybody please help me out with this.
Regards,
Danish.Hi Danish,
Your problem is with the alignment and you need some fix positions .
The solution i feel is u can use as below :
In CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
use
i_callback_html_top_of_page = 'HTML_TOP_OF_PAGE'.
Now on calling routine call use cl_dd_document class :
FORM html_top_of_page USING document TYPE REF TO cl_dd_document .
data : doctable TYPE REF TO cl_dd_table_element,
col1_t1 TYPE REF TO cl_dd_area,
col2_t1 TYPE REF TO cl_dd_area,
col1_t2 TYPE REF TO cl_dd_area,
col2_t2 TYPE REF TO cl_dd_area.
add quick table with five columns
CALL METHOD lw_document->add_table
EXPORTING
no_of_columns = 2
border = '0'
cell_background_transparent = ' '
width = '100%'
IMPORTING
table = doctable.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '40%'
IMPORTING
column = col1_t1.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '60%'
IMPORTING
column = col2_t1.* Filling columns in row
Call method doctable->new_row.
CALL METHOD doctable->add_column
EXPORTING
width = '40%'
IMPORTING
column = col1_t2.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '60%'
IMPORTING
column = col2_t2.
*Now adding the texts
lw_text1 = 'your first text'
CALL METHOD col1_t1->add_text
EXPORTING
text = lw_text.
*Similarly add text for other columns
*Adujust % in width to adjust the column as required
Endform.
Hope this will solve your problem . -
Error whil adding Header to the ALV grid using OO
Hi Guys,
I want to display the Header for the ALV grid using Splitter .
when i am doing like that .I am getting a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
the Code is Below.
*& Report Z_TEST_PGM
REPORT Z_TEST_PGM NO STANDARD PAGE HEADING
LINE-SIZE 120 MESSAGE-ID zotc.
Tables : CKMLMV003 , CKMLMV001.
TYPE-POOLS: slis.
Types : Begin of t_CKMLMV003_out,
WERKS type CKMLMV003-WERKS,
MATNR type CKMLMV003-MATNR,
MISCH_VERH type CKMLMV003-MISCH_VERH,
KALNR_BAL type CKMLMV003-KALNR_BAL,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
MGTYP type CKMLMV003-MGTYP,
End of t_CKMLMV003_out,
Begin of t_CKMLMV001_out,
MATNR type CKMLMV001-MATNR,
KALNR type CKMLMV001-KALNR,
LIFNR_ND type CKMLMV001-LIFNR_ND,
EKORG_ND type CKMLMV001-EKORG_ND,
End of t_CKMLMV001_out,
Begin of t_CKMLMV003_Temp,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
End of t_CKMLMV003_Temp,
Begin of t_Final_out,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
WERKS type CKMLMV003-WERKS,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out,
Begin of t_Final_out1,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out1.
Global Structures *
Data : i_CKMLMV003_str type t_CKMLMV003_out,
i_CKMLMV001_str type t_CKMLMV001_out,
i_Final_str type t_Final_out,
i_Final_str1 type t_Final_out,
i_CKMLMV003_Temp type t_CKMLMV003_Temp.
Global Internal Tables *
Data : i_CKMLMV003_out type standard table of t_CKMLMV003_out,
i_CKMLMV001_out type standard table of t_CKMLMV001_out,
i_Final_out type standard table of t_Final_out,
i_Final_out1 type standard table of t_Final_out.
ALV Report Internal tables *
DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
s_fieldcatalog TYPE slis_fieldcat_alv,
t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
s_basic_fieldcatalog TYPE slis_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv,
v_repid TYPE sy-repid.
*ALV Header declarations
Data: t_header type slis_t_listheader,
i_header_str type slis_listheader,
i_line_event_str TYPE slis_alv_event,
i_events TYPE slis_t_event,
wa_layout type slis_layout_alv.
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container1 type ref to cl_gui_custom_container,
grid2 type ref to cl_gui_alv_grid,
g_custom_container2 type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
gt_final1 type table of t_Final_out.
DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
G_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
G_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
Global Variables *
Data :cnt(4) type n value '0',
g_plant type CKMLMV003-WERKS ,
g_QuanTStr type CKMLMV003-MGTYP ,
g_PurchOrg type CKMLMV001-EKORG_ND,
flag type n value '0',
g_cnt6 type n value '0',
g_cnt7 type n value '0',
g_cnt8 type n value '0',
g_cnt9 type n value '0',
g_cnt10 type n value '0',
g_cnt11 type n value '0',
g_cnt12 type n value '0',
g_cnt13 type n value '0'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
Select-Options : S_MATNR for CKMLMV003-MATNR .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
Parameters : P_MGTYP type CKMLMV003-MGTYP .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
At Selection-Screen on s_matnr .
Perform Validate_MatNumber.
At Selection-Screen on s_werks .
Perform Validate_CostingPlant.
At Selection-Screen on s_GJAHR .
Perform Validate_FiscalYear.
At Selection-Screen on s_PERIO .
Perform Validate_Period.
At Selection-Screen on p_MGTYP .
Perform Validate_QuantityStrType.
*& Form Validate_MatNumber
text
Form Validate_MatNumber.
DATA l_MATNR TYPE CKMLMV003-MATNR.
IF NOT S_MATNR[] IS INITIAL .
CLEAR L_MATNR.
SELECT single MATNR FROM CKMLMV003
INTO l_MATNR
WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Material Number'(001).
ENDIF.
ENDIF.
ENDFORM. "Validate_MatNumber
*& Form Validate_CostingPlant
text
Form Validate_CostingPlant.
DATA l_werks TYPE CKMLMV003-WERKS.
IF NOT S_WERKS[] IS INITIAL .
CLEAR L_WERKS.
SELECT single WERKS FROM T001W
INTO l_WERKS
WHERE WERKS = s_WERKS-low or WERKS = s_WERKS-high.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Costing Plant'(002).
ENDIF.
ENDIF.
ENDFORM. "Validate_CostingPlant
*& Form Validate_FiscalYear
text
Form Validate_FiscalYear.
DATA l_GJAHR TYPE CKMLMV003-GJAHR.
IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
CLEAR L_GJAHR.
SELECT SINGLE GJAHR FROM CKMLMV003
INTO l_GJAHR
WHERE GJAHR LE sy-DATUM(4) .
IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
MESSAGE e999 WITH
'Enter a Valid Fiscal year'(003).
ENDIF.
ENDIF.
ENDFORM. "Validate_FiscalYear
*& Form Validate_Period
text
Form Validate_Period.
DATA l_PERIO TYPE CKMLMV003-PERIO.
IF NOT S_PERIO[] IS INITIAL .
CLEAR L_PERIO.
SELECT single PERIO FROM CKMLMV003
INTO l_PERIO
WHERE PERIO GE 1 and PERIO LE 12 .
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Period'(004).
ENDIF.
ENDIF.
ENDFORM. "Validate_Period
*& Form Validate_QuantityStrType
text
Form Validate_QuantityStrType.
DATA l_MGTYP TYPE CKMLMV003-MGTYP.
IF NOT p_MGTYP IS INITIAL.
CLEAR L_MGTYP.
SELECT SINGLE MGTYP FROM CKMLMV003
INTO l_MGTYP
WHERE MGTYP = p_MGTYP .
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Quantity Structure Type'(005).
ENDIF.
ENDIF.
ENDFORM. "Validate_QuantityStrType
INITIALIZATION of Fields
Class LCL_EVENT_HANDLER DEFINITION.
Public section.
Methods:
TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event <br />
PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Initialization.
v_repid = sy-repid.
Start-of-Selection.
Perform get_CKMLMV003.
Perform get_CKMLMV001.
Perform Get_Finaldata.
Perform Layout_FieldCatalog.
call screen '101'.
Perform ALVGrid_Final_Display.
*& Form Layout_FieldCatalog
text
Form Layout_FieldCatalog.
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-024.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'GJAHR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-012.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'PERIO'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-013.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 4.
s_fieldcatalog-fieldname = 'WERKS'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-025.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 5.
s_fieldcatalog-fieldname = 'LIFNR_ND1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-014.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 6.
s_fieldcatalog-fieldname = 'MISCH_VERH1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-015.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 7.
s_fieldcatalog-fieldname = 'LIFNR_ND2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-016.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 8.
s_fieldcatalog-fieldname = 'MISCH_VERH2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-017.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 9.
s_fieldcatalog-fieldname = 'LIFNR_ND3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-018.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 10.
s_fieldcatalog-fieldname = 'MISCH_VERH3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-019.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 11.
s_fieldcatalog-fieldname = 'LIFNR_ND4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-020.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 12.
s_fieldcatalog-fieldname = 'MISCH_VERH4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-021.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 13.
s_fieldcatalog-fieldname = 'LIFNR_ND5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'MISCH_VERH5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
if g_cnt6 <> '0'.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'LIFNR_ND6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 15.
s_fieldcatalog-fieldname = 'MISCH_VERH6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt7 <> '0'.
s_fieldcatalog-col_pos = 16.
s_fieldcatalog-fieldname = 'LIFNR_ND7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 17.
s_fieldcatalog-fieldname = 'MISCH_VERH7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt8 <> '0'.
s_fieldcatalog-col_pos = 18.
s_fieldcatalog-fieldname = 'LIFNR_ND8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 19.
s_fieldcatalog-fieldname = 'MISCH_VERH8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt9 <> '0'.
s_fieldcatalog-col_pos = 20.
s_fieldcatalog-fieldname = 'LIFNR_ND9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 21.
s_fieldcatalog-fieldname = 'MISCH_VERH9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt10 <> '0'.
s_fieldcatalog-col_pos = 22.
s_fieldcatalog-fieldname = 'LIFNR_ND10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 23.
s_fieldcatalog-fieldname = 'MISCH_VERH10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt11 <> '0'.
s_fieldcatalog-col_pos = 24.
s_fieldcatalog-fieldname = 'LIFNR_ND11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 25.
s_fieldcatalog-fieldname = 'MISCH_VERH11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt12 <> '0'.
s_fieldcatalog-col_pos = 26.
s_fieldcatalog-fieldname = 'LIFNR_ND12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 27.
s_fieldcatalog-fieldname = 'MISCH_VERH12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt13 <> '0'.
s_fieldcatalog-col_pos = 29.
s_fieldcatalog-fieldname = 'LIFNR_ND13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 30.
s_fieldcatalog-fieldname = 'MISCH_VERH13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
ENDFORM. "Layout_FieldCatalog
*& Form get_CKMLMV003
text
Form get_CKMLMV003.
Select WERKS
MATNR
MISCH_VERH
KALNR_BAL
GJAHR
PERIO
MGTYP
from CKMLMV003
into table i_CKMLMV003_out
Where ( MATNR in s_MATNR and
WERKS in s_WERKS and
GJAHR in s_GJAHR and
PERIO in s_PERIO and
MGTYP = p_MGTYP ).
Sort i_CKMLMV003_out by MATNR KALNR_BAL.
ENDFORM. "get_CKMLMV003
*& Form get_CKMLMV001
text
Form get_CKMLMV001.
If Not i_CKMLMV003_out is Initial.
Select MATNR
KALNR
LIFNR_ND
EKORG_ND
from CKMLMV001
into Table i_CKMLMV001_out
for all entries in i_CKMLMV003_out
Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
and WERKS = i_CKMLMV003_out-WERKS
and MATNR = i_CKMLMV003_out-MATNR ).
sort i_CKMLMV001_out by MATNR KALNR.
ENDIF.
ENDFORM. "get_CKMLMV001
*& Form Get_Finaldata
text
Form Get_Finaldata.
Loop at i_CKMLMV001_out into i_CKMLMV001_str.
Loop at i_CKMLMV003_out into i_CKMLMV003_str.
If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR ) .
If ( flag = 0 ).
g_plant = i_CKMLMV003_str-WERKS.
g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
g_quantstr = i_CKMLMV003_str-MGTYP.
flag = 1.
ENDIF.
Move i_CKMLMV003_str-MATNR to i_Final_str-MATNR.
Move i_CKMLMV003_str-WERKS to i_Final_str-WERKS.
Move i_CKMLMV003_str-GJAHR to i_Final_str-GJAHR.
Move i_CKMLMV003_str-PERIO to i_Final_str-PERIO.
Move i_CKMLMV003_str-MISCH_VERH to i_Final_str-MISCH_VERH1.
Move i_CKMLMV001_str-LIFNR_ND to i_Final_str-LIFNR_ND1.
Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
Append i_Final_str to i_Final_out.
Clear : i_CKMLMV003_str .
ENDIF.
ENDLOOP.
Clear : i_CKMLMV001_str , i_Final_str , i_CKMLMV003_temp.
ENDLOOP.
Sort i_Final_out by WERKS MATNR GJAHR PERIO .
Loop at i_Final_out into i_Final_str.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
When 6.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH6.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND6.
g_cnt6 = 1.
When 7.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH7.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND7.
g_cnt7 = 1.
When 8.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH8.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND8.
g_cnt8 = 1.
When 9.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH9.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND9.
g_cnt9 = 1.
When 10.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH10.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND10.
g_cnt10 = 1.
When 11.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH11.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND11.
g_cnt11 = 1.
When 12.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH12.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND12.
g_cnt12 = 1.
When 13.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH13.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND13.
g_cnt13 = 1.
ENDCASE.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
ENDCASE.
**Move-Corresponding i_Final_str to i_Final_str1.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
ENDFORM. "Get_Finaldata
*& Form top_of_page
text
Form top_of_page.
clear t_header.
refresh t_header.
i_header_str-typ = 'H'.
I_header_Str-info = Text-035.
append I_header_str to t_header.
clear I_header_str.
Date
I_header_str-typ = 'S'.
I_header_str-key = Text-036.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO I_header_str-info. "todays date
append I_header_str to t_header.
clear: I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Quantity Structure Type :'.
I_header_Str-info = g_QuantStr.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Purchase Org :'.
I_header_Str-info = g_PurchOrg.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Plant :'.
I_header_Str-info = g_Plant.
append I_header_str to t_header.
clear I_header_str.
CLEAR i_line_event_str.
i_line_event_str-name = 'TOP_OF_PAGE'.
APPEND i_line_event_str TO i_events.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top_of_page
*& ALVGrid_Final_Display
Form ALVGrid_Final_Display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_DEFAULt = c_valx
i_callback_top_of_page = 'TOP_OF_PAGE'
i_Save = c_valx
it_fieldcat = t_fieldcatalog
it_sort = t_sort
it_events = I_events
TABLES
t_outtab = i_final_out1.
ENDFORM. "ALVGrid_Final_Display
*& Form ALVGRID_OO_Display
text
Form ALVGRID_OO_Display.
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = 'MATERIAL'.
i_fcat_str-scrtext_m = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'WERKS'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-025.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 5.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 6.
i_FCAT_str-fieldname = 'MISCH_VERH1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-015.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 7.
i_FCAT_str-fieldname = 'LIFNR_ND2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-016.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 8.
i_FCAT_str-fieldname = 'MISCH_VERH2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-017.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 9.
i_FCAT_str-fieldname = 'LIFNR_ND3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-018.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 10.
i_FCAT_str-fieldname = 'MISCH_VERH3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-019.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 11.
i_FCAT_str-fieldname = 'LIFNR_ND4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-020.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 12.
i_FCAT_str-fieldname = 'MISCH_VERH4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-021.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 13.
i_FCAT_str-fieldname = 'LIFNR_ND5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 14.
i_FCAT_str-fieldname = 'MISCH_VERH5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if g_cnt6 <> '0'.
i_FCAT_str-col_pos = 15.
i_FCAT_str-fieldname = 'LIFNR_ND6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 16.
i_FCAT_str-fieldname = 'MISCH_VERH6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
ENDIF.
*if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events <br />
CALL METHOD GRID1->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = G_DYNDOC_ID.
Call Method grid2->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Endform. "ALVGRID_OO_Display
Form EVENT_TOP_OF_PAGE using DG_DYNDOC_ID
TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C.
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
Endform.
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
Create Object G_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
if g_custom_container1 is initial .
create object g_custom_container1
Exporting
Container_name = CCCONTAINER1
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
Create Object G_SPLITTER
Exporting PARENT = g_custom_container1.
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = G_PARENT_TOP.
*Assigning the Part 2 to GRID
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = g_parent_grid.Hi,
Check if any event is triggered from the event handler class, upon selection.
Usually, the events are handled on double click or on hotspot etc.
Regards,
Satish Kanteti -
Display error message in ALV grid using OOPS
Hi,
I have a requirement to display report in ALV. I have created ALV grid using OOPS with three editable cells and 1 button on toolbar. When user enter values in Ediatble cell and click on the Toolbar button, sales order item should be assigned to contract.
When the user select the row and click on toolbar button, a salesorder item should be assigned to contract and i am using BAPI and fine with BAPI. All the error message should be displayed in a popup and the corresponding failed row should change its color .
Once the user identified the failed row, he can edit the value in the ediatble cells and should reprocess in the same screen ( without going back to selection screen).
To display POP Up, I am using FM BAL_LOG_CREATE, BAL_LOG_MSG_ADD, BAL_DSP_PROFILE_NO_TREE_GET, BAL_CNTL_CREATE.
by using above 4 FM , i can display POP UP. but i cannot change the color of the failed row.
Once I identified the failed row and reprocess from the same screen , I am successful in processing the failed row, but my error log still has the reprocessed row as failed row because, error log is not refreshing.
Please suggest me how to clear error log which was created by using the above FM's and change the color of the failed row .
Thanks in AdvanceHi
Please suggest me how to clear error log which was created by using the above FM's....
U can use BAL_LOG_REFRESH
....and change the color of the failed row
You need to insert a new field for Colour Attributes in your output table and input its name in the layout structure:
IS_LAYOUT-INFO_FNAME = <field name for colour>
The field has to be a CHAR 3 and its value can be -
> Cxy
C is a constant
x is the colour number (from 1 to 9)
y is intensified (0 = off, 1 = on)
After changing the value of output table you need to run the method REFRESH_TABLE_DISPLAY for refreshing the output
Max -
Header in alv grid using class
Hello All,
I developed alv grid using class method.
First I created CREATE OBJECT GR_CCONTAINER
then CREATE OBJECT GR_ALVGRID
then PERFORM FIELD_CATALOG TABLES GT_FIELDCAT----
for field catalog
PERFORM LAYOUT CHANGING GS_LAYOUT.----
for header
p_gs_layout-grid_title = 'class method'.
p_gs_layout-sel_mode = 'D'.
APPEND P_GS_LAYOUT TO IT_LAYOUT.
and finally CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
the report is cooming fine but in header it comes only "class method".
but i need also
1. reporting date
2. reporting time.
can any body tell me how i can i put 2 more heading line
Thanks,
RakeshHi Dude,
Please refer the below link how to handle the header in alv using abap oo
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/abapObjects-ALVModel-UsingHeaderand+Footer
Hope it clears,..............
Thanks & Regards
Ramakrishna Pathi -
Is it possbile to create ALV Grid using Class & without using SE51
Is it possible to create a alv grid using Class, with out using the screen painter(SE51).
Hi Preethi,
It is possible to creat ALV grid using class, provided u have to create a custom control in the screen dialog.
Try with the foll code. This is an example for flight detail.
DATA: container TYPE REF TO cl_gui_custom_container,
alv_con TYPE REF TO cl_gui_alv_grid.
data : it_sflight like table of wa with header line,
g_fieldcat type lvc_t_fcat.
/* Paste the code the PBO
CREATE OBJECT container
EXPORTING
container_name = 'C_SPFLI'. "Specify the container name which u created in the dialog screen.
CREATE OBJECT alv_con
EXPORTING
i_parent = container.
/* Use the foll. to dislay the report
CALL METHOD cl_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
CHANGING
it_outtab = it_sflight[]
IT_FIELDCATALOG = g_fieldcat.
First create the container and then place the ALV in the container and for dislaying pass the necessary table.
Hope this will useful for u.
Get back if u r unable to do it.
Regards
Router -
Sub total in ALV GRID using oops concept
Hi,
If Plant (VBAP-WERKS) is not the same for all items on a Sales Order (VBAK-VBELN is the same for al items) then create a separate line on the report for each different plant specified in the line items. Copy all fields from the original order line except for plant and Net Value. Net Value should be the total of item Net Values for all items with the same plant in the order.
Example:
Data:
Order---- Item- Plant- Net Value---
123---- 010- 3467- 100.00---
123---- 020- 7865- 50.00---
123---- 030- 3467- 80.50---
Report:
Order- Plant- Net Value---
123- 3467- 180.50---
123- 7865- 50.00----
I need to dispaly the Report format in ALV Grid using oops concept...
no need of calling any function modules.
Regards,
NithyaHi
Here is example code
This is the method to be called:
get_subtotals
Use
Returns the current subtotals of the ALV Grid Control. Having created totals for at least one column, users can calculate at most nine subtotals. The list is sorted by the values of one or several columns (called the subtotals column). If a value is changed in the subtotals column, the subtotal is displayed (this is also referred to as control level change).
Integration
Before you access the subtotals value, you use the method get_sort_criteria to get the sort table . One row of this table describes properties of a column in the output table.
If the field SUBTOT is set for a column in this table, the column is a subtotals column.
The field SPOS then indicates at which level (see below) the subtotal has been calculated.
The field FIELDNAME contains the name of the subtotals column in the output table.
Based on this information, you specifically access the values of the tables passed (using reference variables COLLECT01 to COLLECT09).
Features
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->get_subtotals
IMPORTING
EP_COLLECT00 = <reference variable of type REF TO DATA>
EP_COLLECT01 = <reference variable of type REF TO DATA>
EP_COLLECT02 = <reference variable of type REF TO DATA>
EP_COLLECT03 = <reference variable of type REF TO DATA>
EP_COLLECT04 = <reference variable of type REF TO DATA>
EP_COLLECT05 = <reference variable of type REF TO DATA>
EP_COLLECT06 = <reference variable of type REF TO DATA>
EP_COLLECT07 = <reference variable of type REF TO DATA>
EP_COLLECT08 = <reference variable of type REF TO DATA>
EP_COLLECT09 = <reference variable of type REF TO DATA>
ET_GROUPLEVELS = <ínternal table of type LVC_T_GRPL>.
In order to access the values of EP_COLLECT00 to EP_COLLECT09, you use ASSIGN to dereference the relevant reference variable in a field symbol of your output table type (see below).
Parameters
Meaning
EP_COLLECT00
Points to the totals line. Since there is only one totals line which, in addition, has a unique totalling area, no further information is available for this table in table ET_GROUPLEVELS.
get_subtotals
EP_COLLECT01 to EP_COLLECT09
Point to the subtotals line. For each subtotals level, there is one reference variable. Each of these variables points to an internal table that has the type of the output table. EP_COLLECT01 points to the subtotal at the hightest level, while EP_COLLECT02 points to the subtotal at the second highest level, and so on. The levels are derived from the sort priority (field SPOS in the sort table ). The column by which the data was sorted first, is the highest subtotals level.
ET_GROUPLEVELS
Manages all indexes for the individual control levels. The fields of the table have the following meaning:
INDEX_FROM, INDEX_TO: Rows of the output table for which the subtotal was created
LEVEL: Subtotals level (see above)
COUNTER: Number of rows for which the subtotal was created
COMPRESS: For this subtotals line, the user has hidden the associated rows.
COLLECT: Indicates the subtotals table (01-09) in which the values are stored
For an overview, see Methods of Class CL_GUI_ALV_GRID
Activities -
Display ALV GRID Using Dynamic Internal Table
Hi all,
I try to display ALV Grid using Dynamic Internal Table, but when i activate my program, i get an error message "DYN_TABLE" is not type-compatible with formal parameter "IT_OUTTAB". ( DYN_TABLE is my Dynamic Itab).
Anybody can help me how to passing Dynamic Itab into ALV Grid ?? Of ALV Grid only accept static Itab ??
Thanks,Hi Vijay,
It's doesn't work, and make new error "Formal parameter "IT_OUTTAB[]" does not exist. However, the parameter "IT_OUTTAB" has a similar name."
Because the method is:
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE = <any type (ANY)>
I_STRUCTURE_NAME = <string of type DD02L-TABNAME>
IS_VARIANT = <structure of type DISVARIANT>
I_SAVE = <var. of type CHAR01>
I_DEFAULT = <var. of type CHAR01>
IS_LAYOUT = <structure of type LVC_S_LAYO>
IS_PRINT = <structure of type LVC_S_PRNT>
IT_SPECIAL_GROUPS = <internal table of type LVC_T_SGRP>
IT_TOOLBAR_EXCLUDING = <internal table of type UI_FUNCTIONS>
IT_HYPERLINK = <internal table of type LVC_T_HYPE>
IT_ALV_GRAPHICS = <internal table of type DTC_T_TC>
CHANGING
IT_OUTTAB = <internal table>
IT_FIELDCATALOG = <internal table of type LVC_T_FCAT>
IT_SORT = <internal table of type LVC_T_SORT>
IT_FILTER = <internal table of type LVC_T_FILT>
Thanks, -
HI all,
Is it necessary to use container for ALV grid using classes.If not then please help me with a sample code.REPORT z_alv_using_oops_conepts MESSAGE-ID z_OOPS.
TABLES: ekko, ekpo.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA: ok_code TYPE sy-ucomm,
gx_fcat1 TYPE lvc_s_fcat,
gt_fcat1 TYPE STANDARD TABLE OF lvc_s_fcat,
gx_fcat2 TYPE lvc_s_fcat,
gt_fcat2 TYPE STANDARD TABLE OF lvc_s_fcat,
gx_layout1 TYPE lvc_s_layo,
gx_layout2 TYPE lvc_s_layo,
gx_variant TYPE disvariant,
g_custom_container1 TYPE REF TO cl_gui_custom_container,
g_custom_container2 TYPE REF TO cl_gui_custom_container,
grid1 TYPE REF TO cl_gui_alv_grid,
grid2 TYPE REF TO cl_gui_alv_grid,
g_container1 TYPE scrfname VALUE 'MAIN_REPORT_LIST',
g_container2 TYPE scrfname VALUE 'SECOND_REPORT_LIST',
gv_event_rec1 TYPE REF TO lcl_event_receiver,
gv_event_rec2 TYPE REF TO lcl_event_receiver,
gv_repid TYPE sy-repid,
gt_final1 TYPE STANDARD TABLE OF ekko,
gt_final2 TYPE STANDARD TABLE OF ekpo,
gt_final3 TYPE STANDARD TABLE OF ekpo,
gx_final TYPE ekko,
gx_final1 TYPE ekpo.
INITIALIZATION.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK blk3 WITH FRAME .
SELECT-OPTIONS:
s_ebeln FOR ekko-ebeln obligatory,
s_ebelp FOR ekpo-ebelp,
s_bukrs FOR ekko-bukrs,
s_bsart FOR ekko-bsart.
SELECTION-SCREEN END OF BLOCK blk3.
LOCAL CLASSES: Definition
*===============================================================
class lcl_event_receiver: local class to
define and handle own functions.
Definition:
~~~~~~~~~~~
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
hotspot_click1
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id,
hotspot_click2
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD hotspot_click1.
DATA: lv_tabix TYPE sy-tabix,
lx_final TYPE ekko.
READ TABLE gt_final1 INTO gx_final INDEX e_row_id.
IF sy-subrc = 0.
gt_final3 = gt_final2.
DELETE gt_final3 WHERE ebeln NE gx_final-ebeln.
IF NOT g_custom_container2 IS INITIAL.
CALL METHOD grid2->refresh_table_display.
CALL METHOD grid1->refresh_table_display.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
LEAVE LIST-PROCESSING.
ENDIF.
ENDMETHOD. "hotspot_click1
METHOD hotspot_click2.
READ TABLE gt_final3 INTO gx_final1 INDEX e_row_id.
IF sy-subrc = 0.
SET PARAMETER ID 'BES' FIELD gx_final-ebeln.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDMETHOD. "button_click1
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
START-OF-SELECTION *
START-OF-SELECTION.
SELECT * FROM ekko INTO TABLE gt_final1 WHERE ebeln IN s_ebeln
AND bukrs IN s_bukrs
AND bsart IN s_bsart.
IF sy-subrc = 0.
SELECT * FROM ekpo INTO TABLE gt_final2 FOR ALL ENTRIES IN gt_final1
WHERE ebeln = gt_final1-ebeln
AND ebelp IN s_ebelp.
IF sy-subrc = 0.
gt_final3 = gt_final2.
ENDIF.
ENDIF.
PERFORM sub_get_fieldcat CHANGING gt_fcat1.
PERFORM sub_get_fieldcat CHANGING gt_fcat2.
END-OF-SELECTION *
END-OF-SELECTION.
PERFORM display_process.
CALL SCREEN 9000.
MODULE pbo OUTPUT
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
gx_layout1-grid_title = 'Purchase Order Header'.
gx_layout1-zebra = 'X'.
gx_layout1-info_fname = 'COLOR_LINE'.
gx_layout1-sel_mode = 'X'.
gx_layout2-grid_title = 'Purchase Order Items'.
gx_layout2-zebra = 'X'.
gx_layout1-stylefname = 'CB'.
gs_layout1-excp_led = gc_check.
gs_layout1-excp_group = gc_check.
gv_repid = sy-repid.
gx_variant-report = gv_repid.
READ TABLE gt_final1 INTO gx_final INDEX 1.
IF sy-subrc = 0.
DELETE gt_final3 WHERE ebeln NE gx_final-ebeln.
ENDIF.
IF g_custom_container1 IS INITIAL.
CREATE OBJECT g_custom_container1
EXPORTING
container_name = g_container1.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container1.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_layout = gx_layout1
is_variant = gx_variant
i_save = 'U'
i_default = 'X'
i_structure_name = 'EKKO'
CHANGING
it_outtab = gt_final1
it_fieldcatalog = gt_fcat1.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDIF.
IF g_custom_container2 IS INITIAL.
CREATE OBJECT g_custom_container2
EXPORTING
container_name = g_container2.
CREATE OBJECT grid2
EXPORTING
i_parent = g_custom_container2.
CALL METHOD grid2->set_table_for_first_display
EXPORTING
is_layout = gx_layout2
is_variant = gx_variant
i_save = 'U'
i_default = 'X'
i_structure_name = 'EKPO'
CHANGING
it_outtab = gt_final3
it_fieldcatalog = gt_fcat2.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid2.
ENDIF.
CREATE OBJECT gv_event_rec1.
SET HANDLER gv_event_rec1->hotspot_click1 FOR grid1.
CREATE OBJECT gv_event_rec2.
SET HANDLER gv_event_rec1->hotspot_click2 FOR grid2.
IF gt_final2 IS INITIAL.
MESSAGE i000 WITH 'No Items exist for the Purchase Order'.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
To react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD grid1->free.
CALL METHOD grid2->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = gv_repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(009).
ENDIF.
ENDFORM. "EXIT_PROGRAM
*& Form display_process
text
--> p1 text
<-- p2 text
FORM display_process .
DATA: a LIKE sy-ucomm.
DO 100 TIMES.
DO 300 TIMES.
GET TIME.
ENDDO.
a(3) = sy-index.a+3 = '%'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = sy-index
text = a.
ENDDO.
ENDFORM. " display_process
*& Form sub_get_fieldcat
text
<--P_GT_FCAT1 text
FORM sub_get_fieldcat CHANGING lt_fcat TYPE lvc_t_fcat.
gx_fcat1-fieldname = 'EBELN'.
gx_fcat1-tabname = 'gt_final1'.
gx_fcat1-hotspot = 'X'.
APPEND gx_fcat1 TO lt_fcat.
ENDFORM. " sub_get_fieldcat -
Sizeable alv grid using set_table_for_first_display
I would like to be able to resize the alv grid.
The abap program is executing in a MS-Windows environment
MS-window, with SAP session, can be re-sized yet alv grid stays same size
I would like to be able to re-size (make bigger or smaller) once the MS-window has been maximized
Using
CALL METHOD grid->set_table_for_first_display
EXPORTING
is_variant = w_hr_data_grid_layout_variants
i_save = w_hr_data_save_layout_option
is_layout = gs_layout
CHANGING
it_fieldcatalog = gt_fieldcat[]
it_outtab = t_reported_pos_std_table
it_sort = it_sort.Hi,
It may not be possible to resize the ALV grid using the methods of the CL_GUI_ALV_GRID. It would be possible through the methods of the custom container class CL_GUI_CUSTOM_CONTAINER because the grid id attached to the container. There is an event SIZE_CONTROL in the CL_GUI_CUSTOM_CONTAINER class which may be useful for you.
regards,
Sharat. -
Reg. can we display alv grid using field groups (extracts)
Hi,
can we display alv grid using field groups (extracts). is this possible. i have to develop a blocked alv.
tnks
Yerukala SettyNo, you will need the data in an internal table to use ALV.
Cheers
Allan -
F4 help in ALV grid using existing search help
Hi All,
It would be appreciable , if some help on problem. Thanks in advance.
How to provide user defined F4 help in ALV grid using existing search help?
ALV grid has developed using OOPS concept.
Thanks,
Sudhakar.Hi,
if you already developed using OO concept, it should be possible to:
create a handler for event ONF4
The interface will tell you actual field name and value where F4 is pressed. This will enable you to call your own routine (see FM F4-IF....).
Please check how the standard handles F4 - if you have standard and customer-F4 mixed you shouldtake care that the standard handling is triggered.
Regards,
Clemens
Maybe you are looking for
-
BW error in training hierarchy
I have been getting the same error everyday for the last couple of weeks in BW. (see error at the bottom) When looked in the Monitor I noticed the errors stated: Node ID 0000245, char value 00003145 exists several times under the node ID 00000355. No
-
HP Laserjet 1536dnf MFP constant cycling every few minutes
The printer has started to constantly cycle - once every 5 minutes or so. No other issues. I've resorted to keeping it off, unless I need to print or fax (mainly because of the distracting noise). I've tried leaving it unplugged for up to 24 hours
-
Page cannot be displayed(error in ABAP Webdynpro iview)
Hi All , I am trying to create ABAP Webdynpro iview. When i try to preview it...i am getting "Page cannot be displayed". I checked the Web AS connection and it is working fine. Please put on some light on this. Regards Rahul
-
Screen not displaying properly
I replaced my screen back in February, and just recently I experienced the dreaded white screen of death. I took my iPod back apart, and made sure all of the connections were good, and now it is displaying as seen in the picture. Anyone have any idea
-
How to see all billing types in use at present ?
Gurus, My comp is moving for an upgrade. How can I see the list of all billing types that are being used by the company ? The navigation "IMG>sales and distribution>billing>billing documents>define billing types>define billing types" shows me all th