ALV grid with 2 changable columns - need to update a non changable column

I have an ALV Grid that has 2 columns that are editable (this works fine). These two add to the total column which is not editable. I need the total column to get updated when these two are changed. (I have a pushbutton for the user to hit after the changes are made so it can go through the code).
I have check in debug mode and my internal table is getting changed. Even until the container is check to see if it is build, the value is correct, however, once it goes into CALL METHOD GR_GRID->REFRESH_TABLE_DISPLAY, the old total comes up. The new data in the two changable fields are there and correct. I have tried deleting the container but that had not affect on the issue.
I have tried freeing my table and repopulating it, calling the screen again (after setting screen to zero). It seems the container has some sort of memory or buffer that it is getting the data from.
Any ideas how to make it think it is a new 1st time display?
Thank you in advance.

Good day Michelle,
I had the same senario, but i did not use REFRESH_TABLE_DISPLAY instead
do one thing that is add a save button to the alv grid and then after you change the
data copy the changed data to an internal table.
a sample code.
METHOD handle_toolbar.
    DATA:
      lw_toolbar TYPE stb_button.
    CLEAR lw_toolbar.
    lw_toolbar-function = 'SAVE'.
    lw_toolbar-icon = 'ICON_DETAIL'.
    lw_toolbar-butn_type = '0'.
    lw_toolbar-text = 'SAVE'.
      APPEND lw_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
    CASE e_ucomm.
      WHEN 'DETAIL'.
          IF t_emp1 IS NOT INITIAL.
            UPDATE zemp FROM TABLE t_emp1.
            MESSAGE 'Records changed' TYPE 'S'.
          ELSE.
            MESSAGE 'No records are changed' TYPE 'S'.
          ENDIF.
          REFRESH t_emp1.
        ENDIF.
    ENDCASE.
ENDMETHOD.                    "handle_user_command
T_EMP1 IS WHERE YOU STORE THE UPDATED RECORDS.
Regards and Best wishes.

Similar Messages

Display amount in ALV Grid with different Decimal Places based on Currency

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2.
we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65
i need to display values like AED : 22.56

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2. we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65 (converting this value to 22.565 using BAPI_CURRENCY_GETDECIMALS according to currency in my Report)
i need to display values like AED : 22.56
KWD---22.565 but here field is NETWR with 2 decimal.
Need to Display amount in ALV Grid with different Decimal Places based on Currency
Regards,
Dileep Kumar Reddy

ALV Grid with Popup Window

Hey @all,
I want to make a ALV Grid with a Popup Window. The idea is that there is a field for notes and when you click on this field a popup window should be opened where you can insert more text or if text already exists only the first column of the text is shown in field until you click on the field.
Is there any possibility to do it this way? Do I have to make a second Grid for this Popup Window? Do anybody have an example how to solve this problem?
Thank you in advance for your answers!
Greetings,
Alexander

*& Report Z_VISHVAS_ALV1
report z_vishvas_alv1.
type-pools: slis.
data: begin of i_outtab occurs 0.
        include structure sflight.
data:   w_chk type c.                  "For multiple selection
data: end of i_outtab.
      I_OUTTAB TYPE SFLIGHT OCCURS 0,
data: i_private type slis_data_caller_exit,
      i_selfield type slis_selfield,
      w_exit(1) type c.
parameters: p_title type sy-title.
start-of-selection.
select * from sflight into table i_outtab.
call function 'REUSE_ALV_POPUP_TO_SELECT'
       exporting
            i_title                 = p_title
            i_selection             = 'X'
            i_zebra                 = 'X'
          I_SCREEN_START_COLUMN   = 0
          I_SCREEN_START_LINE     = 0
          I_SCREEN_END_COLUMN     = 0
          I_SCREEN_END_LINE       = 0
            i_checkbox_fieldname    = 'W_CHK'
          I_LINEMARK_FIELDNAME    =
          I_SCROLL_TO_SEL_LINE    = 'X'
            i_tabname               = 'I_OUTTAB'
            i_structure_name        = 'SFLIGHT'
          IT_FIELDCAT             =
          IT_EXCLUDING            =
          I_CALLBACK_PROGRAM      =
          I_CALLBACK_USER_COMMAND =
           IS_PRIVATE             = I_PRIVATE
     importing
            es_selfield             = i_selfield
            e_exit                  = w_exit
       tables
            t_outtab                = i_outtab
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
   MESSAGE i000(0k) WITH sy-subrc.
endif.
*****the internal table is modified with a cross sign for marking the
***rows selected
loop at i_outtab where w_chk = 'X'.
    write: / i_outtab-carrid, i_outtab-price.
endloop.

ALV GRID with own EXCEL-Template

Hallo,
I have Problem with using ALV-Grid with a own created
template.
At First I copy the SAP_OM.XLS template to CUS_OM.XLS.
Then I update it by deleting all sheets, but not RAWDATA.
When I use this template in ALV-GRID, it would be the right one, but it his no Data.
The security settings in Excel are correct.
Can anyone help me to show the data like the normal
ALV-GRID??
thanks Dieter

Hi
Check this link...
How to send data to different tabs of an excel sheet?

ALV GRID with icon fields. When exports to Excel, icon fields are emtpy.

Hi all,
In our SAP system (6.0 ECC) we've noticed the following behaviour:
In ALV GRID with icons (color lights for example...) when we export the list to Excel format with the standard button bat, the icon column is always empty.
We think that in previous SAP version (4.7), the code corresponding to the icon appeared (For example @08@ for green light).
It's possible to have tha same functionality in this new version like in 4.7?
Regards.
Edited by: Ole ES on Nov 17, 2010 6:05 PM

Hi,
Check the format in which you export to Excel (MHTML, XML, ...) and try antoher one.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/66/79ad48157f11d2953700a0c930328a/content.htm
I think the integrated Excel mode shows '@08@'.
Best regards,
Guillaume

OO ALV grid with a header line is this possible?

Howdy!
I have a requirement where I need to produce an ALV grid with the following format:
<b>Text 1     Text 2 Text 3                  Text 4
                          Text 6
Col_1 Col_2 Col_3 Col_4 Col_5 Col_6 Col_7 Col_8 Col_9
Cell conents -
Cell conents -
Cell conents -
Cell conents -
Cell conents -
</b>
Anyone got any idea on how to get the 'TEXT' fields into the ALV grid? These are dynamic texts that would basically display details of data entered in the selection screen.
The ALV title line is limited to 70 characters and I can't think of another way of doing this.
The texts need to appear on the ALV grid becasue the user would like to download them to Excel in addition to the ALV cell contents using the standard ALV functionality.
Any ideas would be appreciated!
Message was edited by: Robert

I'm thinking that this may not work because it is not a full screen grid and the grid container does not care about the container on top of it so, it most likely would not print it.   Implement this example program, you can see how this would work for you if you were using the FM.
report zrich_0001
       no standard page heading.
* Global ALV Data Declarations
type-pools slis.
data: begin of i_alv occurs 0,
      matnr type mara-matnr,
      end of i_alv.
* Miscellanous Data Declarations
data: fieldcat type slis_t_fieldcat_alv,
      events   type slis_t_event,
      list_top_of_page type slis_t_listheader,
      top_of_page type slis_formname value 'TOP_OF_PAGE'.
start-of-selection.
perform initialization.
perform get_data.
perform call_alv.
end-of-selection.
* Form Initialization
form initialization.
clear i_alv.       refresh i_alv.
perform eventtab_build using events[].
endform.
* Form Get_Data
form get_data.
select matnr into table i_alv
              from mara up to 100 rows.
endform.
* CALL_ALV
form call_alv.
data: variant type disvariant.
data: repid type sy-repid.
repid = sy-repid.
variant-report = sy-repid.
variant-username = sy-uname.
perform build_field_catalog.
perform comment_build using list_top_of_page[].
* Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat        = fieldcat
            i_callback_program = repid
            is_variant         = variant
            it_events          = events[]
            i_save             = 'U'
       tables
            t_outtab           = i_alv.
endform.
* EVENTTAB_BUILD
form eventtab_build using events type slis_t_event.
* Registration of events to happen during list display
data: tmp_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = events.
read table events with key name = slis_ev_top_of_page
                           into tmp_event.
if sy-subrc = 0.
    move top_of_page to tmp_event-form.
    append tmp_event to events.
endif.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
clear: fieldcat. refresh: fieldcat.
data: tmp_fc type slis_fieldcat_alv.
tmp_fc-reptext_ddic = 'Material'.
tmp_fc-fieldname    = 'MATNR'.
tmp_fc-tabname      = 'I_ALV'.
tmp_fc-outputlen    = 18.
append tmp_fc to fieldcat.
endform.
* COMMENT_BUILD
form comment_build using list_top_of_page type
                                        slis_t_listheader.
data: tmp_line type slis_listheader.
clear tmp_line.
tmp_line-typ = 'H'.
tmp_line-info = 'Here is a line of text'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key1'.
tmp_line-info = 'Here is a value'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key2'.
tmp_line-info = 'Here is another value'.
append tmp_line to list_top_of_page.
endform.
* TOP_OF_PAGE
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            i_logo             = 'ENJOYSAP_LOGO'
            it_list_commentary = list_top_of_page.
endform.
Regards,
Rich Heilman

Manipulate Layout on ALV Grid with dynamic table

Dear all
i'm generating a dynamic table depending of a date selection. That means that I show columns for weeks and the quantity of weeky migh change.
Now the users wants to have a specific layout of the ALV grid with totals. When he saves the layout, only the weeks at this selection will show the next time he runs the programm with a larger selection.
a) Is it possible to modify the layout during runtime by programming?
b) Do you have any other ideas how to solve this problem?
Thank you

You don't know the names of your columns? hmm you do, because before you created dynamic table you had to create field catalog, so the structure and column names of newly (dynamically) created table will be the same like defined in the field catalog.
The last loop also does not look good, in my opinion should be something like:
LOOP AT lt_datatable +(my first table)+ ASSIGNING <ls_data4>.
    AT NEW pernr.
      APPEND initial line to <fs_1> assigning <fs_2>.
      <fs_2>-pernr = <ls_data4>-pernr.
    ENDAT.
    ASSIGN COMPONENT <ls_data4>-wage_type OF STRUCTURE <fs_2> TO <fs_5>.
    <fs_5> = <ls_data4>-amount.
ENDLOOP.
also keep in mind that number of calls of method cl_alv_table_create=>create_dynamic_table is limited to 36 (?) calls within one program session because it uses dynamic subroutine pool behind so you will have short dump if you will execute that 37 times.

ALV grid with editable fields

Dear Colleagues,
I develop an ALV grid with OO standard methods. Before the first display of the table I define the editable fields. It works fine.
I have a problem : if the table is empty and I press the standard icons "Append a line" or "Insert a line", the new line don't have the defined editable characteristics.for fields. Is there a standard method which I have forgotten ?
Thanks a lot and kind regards
Peter

vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_delete_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_append_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_copy_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_insert_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_copy.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_cut.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_paste.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_undo.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
* Displaying the output in ALV Grid
    vs_layout_grid-no_rowmark = 'X'.
    vs_layout_grid-zebra      = 'X'.
    vs_layout_grid-cwidth_opt = 'X'.
    vs_layout_grid-edit       = 'X'.
    vs_layout_grid-ctab_fname = 'CT'.
    vs_layout_grid-stylefname = 'CELLTAB'.
    CALL METHOD v_grid->set_table_for_first_display
      EXPORTING
        i_save                        = 'X'
        is_layout                     = vs_layout_grid
        it_toolbar_excluding          = i_toolbar_excluding[]
      CHANGING
        it_outtab                     = itab[]
        it_fieldcatalog               = it_fieldcat[]
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4.
    IF sy-subrc NE 0.
      MESSAGE 'ALV Grid display unsuccessful' TYPE 'I'.
      STOP.
    ENDIF.                             " IF sy-subrc NE 0
ELSE.                                " IF w_custom_container...
* Refresh the container if it already exists
    CALL METHOD v_grid->refresh_table_display
      EXCEPTIONS
        finished = 1
        OTHERS   = 2.
    IF sy-subrc NE 0.
      MESSAGE 'Refreshing the container is not successful' TYPE 'I'.
      STOP.
    ENDIF.

ALV grid with 2 labels on the output

Hi,
I am trying ALV Grid with two labels using Function modules.
in the output, it should appear like...
Header1 | Header2 | Header3 | Header4 |
T21
T22
T31
T32
First line is for Header lable and second line is for item lable under corresponding Header labels.
Pls. can any suggest me a solution for this..
Thanks
PRa

Using the Gird Functions it is not possible, you can get the with the help of ALV list function.
If you use this aproach you will loose some Functionalities, Your Report Output will Distorted.
cehck this image..
http://img100.imageshack.us/img100/3846/output6ef.th.gif
REPORT ZTEST_ALV message-id zz .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT type slis_layout_alv,
x_events type slis_alv_event,
it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
MALE type i,
female type i,
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'MALE'.
X_FIELDCAT-SELTEXT_L = 'MALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'FEMALE'.
X_FIELDCAT-SELTEXT_L = 'FEMALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
L_LAYOUT-NO_COLHEAD = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
it_events = it_events
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
*-To display the headers for main list
FORMAT COLOR COL_HEADING.
WRITE: / SY-ULINE(103).
WRITE: / SY-VLINE,
(8) ' ' ,
SY-VLINE,
(8) ' ' ,
SY-VLINE,
(19) '***'(015) centered,
sy-vline.
WRITE: / SY-VLINE,
(8) 'VBELN'(013) ,
SY-VLINE,
(8) 'POSNR'(014) ,
SY-VLINE,
(8) 'MALE'(016) ,
sy-vline,
(8) 'FMALE'(017) ,
sy-vline.
FORMAT COLOR OFF.
ENDFORM.

Default collapsed view in ALV grid with subtotoal lines

Hallo experts,
I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
Can any you help me finding this option.
Thanks.
Matt.

Hallo experts,
I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
Can any you help me finding this option.
Thanks.
Matt.
Hi Matt,
Whe you call the FM REUSE_ALV_GRID_DISPLAY, you have to fill the table it_sort.
In this table, you have to fill the field FIELDNAME with the field that you can show with susbstotals and fill the field EXPA with 'X'.
W_SORT-SPOS = 1.
W_SORT-FIELDNAME = 'CODIGO'.
W_SORT-SUBTOT = 'X'.
W_SORT-EXPA = 'X'.
APPEND W_SORT TO IT_SORT.
In the fieldcatalog there must be any with the field DO_SUM = 'X'
You can maka this directly in the list by creating a variant with susbtotals, colapse them and save as a default variant for all users.
Regards,
Pepe
Regards,
Pepe

Binding ALV GRID with Deep Internal Table

Hello all,
I am looking for a way to display ALV Grid with the Deep ITAB.
My ITAB is not too complex.
It has One Structure which gets whole DB table + One extra field.
Therefore my Itab looks as follows.
TYPES: BEGIN OF TY_TRIP,
        ZPM_UPLOAD LIKE ZDBTABLE, "ZDBTABLE is custom database table.
        TDTIME TYPE STRING,
       END OF TY_TRIP.
DATA: ITAB TYPE TABLE OF TY_TRIP,
      WA_ITAB LIKE LINE OF ITAB.
Now i am able to populate data into Deep ITAB.
If i call ALV Grid with ITAB then i get error. So how to call 'REUSE_ALV_GRID_DISPLAY' with this ITAB?
Thanks in advance.

Hello,
My senior asked me to use the below definition.
TYPES: BEGIN OF TY_TRIP.
        INCLUDE STRUCTURE ZDBTABLE.
TYPES: TDTIME TYPE STRING,
       END OF TY_TRIP.
DATA: ITAB TYPE TABLE OF TY_TRIP,
      WA_ITAB LIKE LINE OF ITAB.
If anyone else is looking to print in ALV, they can use this type of ITAB definition though it gives you the flexiblity to create ITAB and also making it FLAT and not DEEP.
But i am still looking for an answer for my first post.
Thanks.

Move sign to left of quantity on alv grid with & stil total quantity column

Hi Guys,
Here is my problem.. I have a column on my alv grid that is signed. I want the sign to appear to the left of the number.
This column needs to be totalled so I can't use the function module CLOI_PUT_SIGN_IN_FRONT. I've also tried (as per forum thread) having the field type as TABHIST-DELRATE but this rounds the values and the sign is still on the wrong side.
Any ideas would be gratefully received..
Regards,
Liz.

I think first you need to read
1. USR01-DCPFM for user default decimals values, by giving user sy-uname then go to
2. DDVAL giving USR01 & DCPFM you will get domain values
if domain values X or Y or space arrange the EDIT_MASK accordingly and pass to field catalog.
( Here you can also use fm DOMAIN_VALUE_GET)
May this will you out.
a®

Group feature at ALV grid with editable columns

Am I right ?
Group function by using a sorted layout is disabled while having one (or more) editable columns, isn't it ?
... or is there a possibility to use gouped rows ?
Greetings
Markus

Also...
*& Report ZDEMO_ALVGRID_EDIT *
*& Example of a simple ALV Grid Report *
*& The basic ALV grid, Enhanced to display specific fields as *
*& editable depending on field value *
REPORT ZDEMO_ALVGRID_EDIT .
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
field_style TYPE lvc_t_styl, "FOR DISABLE
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: it_fieldcat TYPE lvc_t_fcat, "slis_t_fieldcat_alv WITH HEADER LINE,
wa_fieldcat TYPE lvc_s_fcat,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE lvc_s_layo, "slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM set_specific_field_attributes.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-scrtext_m = 'Purchase Order'.
wa_fieldcat-col_pos = 0.
wa_fieldcat-outputlen = 10.
wa_fieldcat-emphasize = 'X'.
wa_fieldcat-key = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-scrtext_m = 'PO Item'.
wa_fieldcat-col_pos = 1.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'STATU'.
wa_fieldcat-scrtext_m = 'Status'.
wa_fieldcat-col_pos = 2.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-scrtext_m = 'Item change date'.
wa_fieldcat-col_pos = 3.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-scrtext_m = 'Material Number'.
wa_fieldcat-col_pos = 4.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MENGE'.
wa_fieldcat-scrtext_m = 'PO quantity'.
wa_fieldcat-col_pos = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-scrtext_m = 'Order Unit'.
wa_fieldcat-col_pos = 6.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-scrtext_m = 'Net Price'.
wa_fieldcat-edit = 'X'. "sets whole column to be editable
wa_fieldcat-col_pos = 7.
wa_fieldcat-outputlen = 15.
wa_fieldcat-datatype = 'CURR'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'PEINH'.
wa_fieldcat-scrtext_m = 'Price Unit'.
wa_fieldcat-col_pos = 8.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
i_callback_program = gd_repid
i_callback_user_command = 'USER_COMMAND'
is_layout_lvc = gd_layout
it_fieldcat_lvc = it_fieldcat
i_save = 'X'
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO CORRESPONDING FIELDS OF TABLE it_ekko.
ENDFORM. " DATA_RETRIEVAL
*& Form set_specific_field_attributes
populate FIELD_STYLE table with specific field attributes
form set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
Populate style variable (FIELD_STYLE) with style properties
The NETPR field/column has been set to editable in the fieldcatalog...
The following code sets it to be disabled(display only) if 'NETPR'
is gt than 10.
LOOP AT it_ekko INTO wa_ekko.
IF wa_ekko-netpr GT 10.
ls_stylerow-fieldname = 'NETPR' .
ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
"set field to disabled
APPEND ls_stylerow TO wa_ekko-field_style.
MODIFY it_ekko FROM wa_ekko.
ENDIF.
ENDLOOP.
endform. " set_specific_field_attributes
REWARD POINTS IF usefful !!

How to design ALV GRID with a column in NON-editable Mode and has F4 Help?

Hello Friends,
How to code for ALV GRID, which has a column that takes value only from F4 Help and does not accept any other user input?
Can I have that column non-editable and yet has F4 Help?
Please help ASAP.

Hi,
The examples in the mentioned programs do not suffice my problem.In these programs. They have made the cell non-editable but you cant even input value through F4 Help.
I want to make a cell non-editable (which can be changed only through F4 Help), which do not accept user input.

Fieldcontent in field catalog in ALV GRID with leading blanks to be display

Hello,
I want to display the result of a report in an ALV Grid.
There are different columns in the ALV, one of them contains text, sometimes with leading blanks.
The ALV does not display the blanks, cut them and moves the rest to the left.
I have used LVC_S_FCAT-JUST with 'R' but this moves the content of the field only to the right (right justified), so that it looks like there is always a lot of blnks on the left side .
Is there any possibility to display blanks when they appear in the text field?
e.g.
TEXT1 (10)
9991-A
9950-B
9090-T
9675-N
Do´t ask, why there are leading blanks. It is always your customer or manager who determines the results!
Thank you very much for any hint that brings happiness into the face of this customer / manager.
Best regards
Dirk

Hi Sunil,
unfortunately this did not help!
But what can I expect, when the forum works the same.
e.g.
TEXT1 (10)
9991-A
9950-B
9090-T
9675-N
should more look like:
e.g.
TEXT1 (10)
9991-A
_9950-B
___9090-T
__9675-N
but without all the '_'.
Regards
Dirk

ALV grid with 2 changable columns - need to update a non changable column

Similar Messages

Maybe you are looking for