ALV grid with 2 headers

Hi Gurus,
I need to display ALV GRID as below.
Header1 Header2
col1col2 col3 col4
Here header1 and header2 are top headers. Both Header1(col1 , col2) and Header2 (col3 , col4) have 2 subheaders below them.
Could you please tell me, how to display in this format.
Thanks & Regards,
Vinit

Hi Venkat and all,
Thanks for replying. I have already seen this thread.
Here using list display the program is mentioned, not by grid display.
Could you all please help me out from this.
Thanks & Regards,
Vinit

Similar Messages

ALV grid with 2 labels on the output

Hi,
I am trying ALV Grid with two labels using Function modules.
in the output, it should appear like...
Header1 | Header2 | Header3 | Header4 |
T21
T22
T31
T32
First line is for Header lable and second line is for item lable under corresponding Header labels.
Pls. can any suggest me a solution for this..
Thanks
PRa

Using the Gird Functions it is not possible, you can get the with the help of ALV list function.
If you use this aproach you will loose some Functionalities, Your Report Output will Distorted.
cehck this image..
http://img100.imageshack.us/img100/3846/output6ef.th.gif
REPORT ZTEST_ALV message-id zz .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT type slis_layout_alv,
x_events type slis_alv_event,
it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
MALE type i,
female type i,
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'MALE'.
X_FIELDCAT-SELTEXT_L = 'MALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'FEMALE'.
X_FIELDCAT-SELTEXT_L = 'FEMALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
L_LAYOUT-NO_COLHEAD = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
it_events = it_events
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
*-To display the headers for main list
FORMAT COLOR COL_HEADING.
WRITE: / SY-ULINE(103).
WRITE: / SY-VLINE,
(8) ' ' ,
SY-VLINE,
(8) ' ' ,
SY-VLINE,
(19) '***'(015) centered,
sy-vline.
WRITE: / SY-VLINE,
(8) 'VBELN'(013) ,
SY-VLINE,
(8) 'POSNR'(014) ,
SY-VLINE,
(8) 'MALE'(016) ,
sy-vline,
(8) 'FMALE'(017) ,
sy-vline.
FORMAT COLOR OFF.
ENDFORM.

Display amount in ALV Grid with different Decimal Places based on Currency

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2.
we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65
i need to display values like AED : 22.56

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2. we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65 (converting this value to 22.565 using BAPI_CURRENCY_GETDECIMALS according to currency in my Report)
i need to display values like AED : 22.56
KWD---22.565 but here field is NETWR with 2 decimal.
Need to Display amount in ALV Grid with different Decimal Places based on Currency
Regards,
Dileep Kumar Reddy

ALV Grid with Popup Window

Hey @all,
I want to make a ALV Grid with a Popup Window. The idea is that there is a field for notes and when you click on this field a popup window should be opened where you can insert more text or if text already exists only the first column of the text is shown in field until you click on the field.
Is there any possibility to do it this way? Do I have to make a second Grid for this Popup Window? Do anybody have an example how to solve this problem?
Thank you in advance for your answers!
Greetings,
Alexander

*& Report Z_VISHVAS_ALV1
report z_vishvas_alv1.
type-pools: slis.
data: begin of i_outtab occurs 0.
        include structure sflight.
data:   w_chk type c.                  "For multiple selection
data: end of i_outtab.
      I_OUTTAB TYPE SFLIGHT OCCURS 0,
data: i_private type slis_data_caller_exit,
      i_selfield type slis_selfield,
      w_exit(1) type c.
parameters: p_title type sy-title.
start-of-selection.
select * from sflight into table i_outtab.
call function 'REUSE_ALV_POPUP_TO_SELECT'
       exporting
            i_title                 = p_title
            i_selection             = 'X'
            i_zebra                 = 'X'
          I_SCREEN_START_COLUMN   = 0
          I_SCREEN_START_LINE     = 0
          I_SCREEN_END_COLUMN     = 0
          I_SCREEN_END_LINE       = 0
            i_checkbox_fieldname    = 'W_CHK'
          I_LINEMARK_FIELDNAME    =
          I_SCROLL_TO_SEL_LINE    = 'X'
            i_tabname               = 'I_OUTTAB'
            i_structure_name        = 'SFLIGHT'
          IT_FIELDCAT             =
          IT_EXCLUDING            =
          I_CALLBACK_PROGRAM      =
          I_CALLBACK_USER_COMMAND =
           IS_PRIVATE             = I_PRIVATE
     importing
            es_selfield             = i_selfield
            e_exit                  = w_exit
       tables
            t_outtab                = i_outtab
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
   MESSAGE i000(0k) WITH sy-subrc.
endif.
*****the internal table is modified with a cross sign for marking the
***rows selected
loop at i_outtab where w_chk = 'X'.
    write: / i_outtab-carrid, i_outtab-price.
endloop.

ALV grid with editable fields

Dear Colleagues,
I develop an ALV grid with OO standard methods. Before the first display of the table I define the editable fields. It works fine.
I have a problem : if the table is empty and I press the standard icons "Append a line" or "Insert a line", the new line don't have the defined editable characteristics.for fields. Is there a standard method which I have forgotten ?
Thanks a lot and kind regards
Peter

vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_delete_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_append_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_copy_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_insert_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_copy.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_cut.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_paste.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_undo.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
    APPEND vs_toolbar_excluding TO i_toolbar_excluding.
* Displaying the output in ALV Grid
    vs_layout_grid-no_rowmark = 'X'.
    vs_layout_grid-zebra      = 'X'.
    vs_layout_grid-cwidth_opt = 'X'.
    vs_layout_grid-edit       = 'X'.
    vs_layout_grid-ctab_fname = 'CT'.
    vs_layout_grid-stylefname = 'CELLTAB'.
    CALL METHOD v_grid->set_table_for_first_display
      EXPORTING
        i_save                        = 'X'
        is_layout                     = vs_layout_grid
        it_toolbar_excluding          = i_toolbar_excluding[]
      CHANGING
        it_outtab                     = itab[]
        it_fieldcatalog               = it_fieldcat[]
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4.
    IF sy-subrc NE 0.
      MESSAGE 'ALV Grid display unsuccessful' TYPE 'I'.
      STOP.
    ENDIF.                             " IF sy-subrc NE 0
ELSE.                                " IF w_custom_container...
* Refresh the container if it already exists
    CALL METHOD v_grid->refresh_table_display
      EXCEPTIONS
        finished = 1
        OTHERS   = 2.
    IF sy-subrc NE 0.
      MESSAGE 'Refreshing the container is not successful' TYPE 'I'.
      STOP.
    ENDIF.

ALV GRID with own EXCEL-Template

Hallo,
I have Problem with using ALV-Grid with a own created
template.
At First I copy the SAP_OM.XLS template to CUS_OM.XLS.
Then I update it by deleting all sheets, but not RAWDATA.
When I use this template in ALV-GRID, it would be the right one, but it his no Data.
The security settings in Excel are correct.
Can anyone help me to show the data like the normal
ALV-GRID??
thanks Dieter

Hi
Check this link...
How to send data to different tabs of an excel sheet?

ALV GRID with icon fields. When exports to Excel, icon fields are emtpy.

Hi all,
In our SAP system (6.0 ECC) we've noticed the following behaviour:
In ALV GRID with icons (color lights for example...) when we export the list to Excel format with the standard button bat, the icon column is always empty.
We think that in previous SAP version (4.7), the code corresponding to the icon appeared (For example @08@ for green light).
It's possible to have tha same functionality in this new version like in 4.7?
Regards.
Edited by: Ole ES on Nov 17, 2010 6:05 PM

Hi,
Check the format in which you export to Excel (MHTML, XML, ...) and try antoher one.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/66/79ad48157f11d2953700a0c930328a/content.htm
I think the integrated Excel mode shows '@08@'.
Best regards,
Guillaume

OO ALV grid with a header line is this possible?

Howdy!
I have a requirement where I need to produce an ALV grid with the following format:
<b>Text 1     Text 2 Text 3                  Text 4
                          Text 6
Col_1 Col_2 Col_3 Col_4 Col_5 Col_6 Col_7 Col_8 Col_9
Cell conents -
Cell conents -
Cell conents -
Cell conents -
Cell conents -
</b>
Anyone got any idea on how to get the 'TEXT' fields into the ALV grid? These are dynamic texts that would basically display details of data entered in the selection screen.
The ALV title line is limited to 70 characters and I can't think of another way of doing this.
The texts need to appear on the ALV grid becasue the user would like to download them to Excel in addition to the ALV cell contents using the standard ALV functionality.
Any ideas would be appreciated!
Message was edited by: Robert

I'm thinking that this may not work because it is not a full screen grid and the grid container does not care about the container on top of it so, it most likely would not print it.   Implement this example program, you can see how this would work for you if you were using the FM.
report zrich_0001
       no standard page heading.
* Global ALV Data Declarations
type-pools slis.
data: begin of i_alv occurs 0,
      matnr type mara-matnr,
      end of i_alv.
* Miscellanous Data Declarations
data: fieldcat type slis_t_fieldcat_alv,
      events   type slis_t_event,
      list_top_of_page type slis_t_listheader,
      top_of_page type slis_formname value 'TOP_OF_PAGE'.
start-of-selection.
perform initialization.
perform get_data.
perform call_alv.
end-of-selection.
* Form Initialization
form initialization.
clear i_alv.       refresh i_alv.
perform eventtab_build using events[].
endform.
* Form Get_Data
form get_data.
select matnr into table i_alv
              from mara up to 100 rows.
endform.
* CALL_ALV
form call_alv.
data: variant type disvariant.
data: repid type sy-repid.
repid = sy-repid.
variant-report = sy-repid.
variant-username = sy-uname.
perform build_field_catalog.
perform comment_build using list_top_of_page[].
* Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat        = fieldcat
            i_callback_program = repid
            is_variant         = variant
            it_events          = events[]
            i_save             = 'U'
       tables
            t_outtab           = i_alv.
endform.
* EVENTTAB_BUILD
form eventtab_build using events type slis_t_event.
* Registration of events to happen during list display
data: tmp_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = events.
read table events with key name = slis_ev_top_of_page
                           into tmp_event.
if sy-subrc = 0.
    move top_of_page to tmp_event-form.
    append tmp_event to events.
endif.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
clear: fieldcat. refresh: fieldcat.
data: tmp_fc type slis_fieldcat_alv.
tmp_fc-reptext_ddic = 'Material'.
tmp_fc-fieldname    = 'MATNR'.
tmp_fc-tabname      = 'I_ALV'.
tmp_fc-outputlen    = 18.
append tmp_fc to fieldcat.
endform.
* COMMENT_BUILD
form comment_build using list_top_of_page type
                                        slis_t_listheader.
data: tmp_line type slis_listheader.
clear tmp_line.
tmp_line-typ = 'H'.
tmp_line-info = 'Here is a line of text'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key1'.
tmp_line-info = 'Here is a value'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key2'.
tmp_line-info = 'Here is another value'.
append tmp_line to list_top_of_page.
endform.
* TOP_OF_PAGE
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            i_logo             = 'ENJOYSAP_LOGO'
            it_list_commentary = list_top_of_page.
endform.
Regards,
Rich Heilman

Manipulate Layout on ALV Grid with dynamic table

Dear all
i'm generating a dynamic table depending of a date selection. That means that I show columns for weeks and the quantity of weeky migh change.
Now the users wants to have a specific layout of the ALV grid with totals. When he saves the layout, only the weeks at this selection will show the next time he runs the programm with a larger selection.
a) Is it possible to modify the layout during runtime by programming?
b) Do you have any other ideas how to solve this problem?
Thank you

You don't know the names of your columns? hmm you do, because before you created dynamic table you had to create field catalog, so the structure and column names of newly (dynamically) created table will be the same like defined in the field catalog.
The last loop also does not look good, in my opinion should be something like:
LOOP AT lt_datatable +(my first table)+ ASSIGNING <ls_data4>.
    AT NEW pernr.
      APPEND initial line to <fs_1> assigning <fs_2>.
      <fs_2>-pernr = <ls_data4>-pernr.
    ENDAT.
    ASSIGN COMPONENT <ls_data4>-wage_type OF STRUCTURE <fs_2> TO <fs_5>.
    <fs_5> = <ls_data4>-amount.
ENDLOOP.
also keep in mind that number of calls of method cl_alv_table_create=>create_dynamic_table is limited to 36 (?) calls within one program session because it uses dynamic subroutine pool behind so you will have short dump if you will execute that 37 times.

Default collapsed view in ALV grid with subtotoal lines

Hallo experts,
I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
Can any you help me finding this option.
Thanks.
Matt.

Hallo experts,
I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
Can any you help me finding this option.
Thanks.
Matt.
Hi Matt,
Whe you call the FM REUSE_ALV_GRID_DISPLAY, you have to fill the table it_sort.
In this table, you have to fill the field FIELDNAME with the field that you can show with susbstotals and fill the field EXPA with 'X'.
W_SORT-SPOS = 1.
W_SORT-FIELDNAME = 'CODIGO'.
W_SORT-SUBTOT = 'X'.
W_SORT-EXPA = 'X'.
APPEND W_SORT TO IT_SORT.
In the fieldcatalog there must be any with the field DO_SUM = 'X'
You can maka this directly in the list by creating a variant with susbtotals, colapse them and save as a default variant for all users.
Regards,
Pepe
Regards,
Pepe

Binding ALV GRID with Deep Internal Table

Hello all,
I am looking for a way to display ALV Grid with the Deep ITAB.
My ITAB is not too complex.
It has One Structure which gets whole DB table + One extra field.
Therefore my Itab looks as follows.
TYPES: BEGIN OF TY_TRIP,
        ZPM_UPLOAD LIKE ZDBTABLE, "ZDBTABLE is custom database table.
        TDTIME TYPE STRING,
       END OF TY_TRIP.
DATA: ITAB TYPE TABLE OF TY_TRIP,
      WA_ITAB LIKE LINE OF ITAB.
Now i am able to populate data into Deep ITAB.
If i call ALV Grid with ITAB then i get error. So how to call 'REUSE_ALV_GRID_DISPLAY' with this ITAB?
Thanks in advance.

Hello,
My senior asked me to use the below definition.
TYPES: BEGIN OF TY_TRIP.
        INCLUDE STRUCTURE ZDBTABLE.
TYPES: TDTIME TYPE STRING,
       END OF TY_TRIP.
DATA: ITAB TYPE TABLE OF TY_TRIP,
      WA_ITAB LIKE LINE OF ITAB.
If anyone else is looking to print in ALV, they can use this type of ITAB definition though it gives you the flexiblity to create ITAB and also making it FLAT and not DEEP.
But i am still looking for an answer for my first post.
Thanks.

ALV grid with 2 headers - using OOPS

Hi,
I have a requirement wherein I need to display 2 headers using ALV Grid. I am using cl_gui_alv_grid->set_table_for_first display.
                Header1                    Header2
Col1     Col2     Col3     Col4     Col5
1     2     3     4     5
Please suggest if this is possible, if yes, how to acheive it.
Thanks,
Smita

HI RAM,
I have did same like what you said. but iam not getting. Below is the pgm what i have dev. please correct it and let me knwo.
TYPE-POOLS: SLIS.
DATA: I_CATLOG TYPE slis_t_fieldcat_alv,
      W_CATLOG TYPE SLIS_FIELDCAT_ALV,
      I_CATLOG2 TYPE slis_t_fieldcat_alv,
      W_CATLOG2 TYPE SLIS_FIELDCAT_ALV,
      V_PGM TYPE SY-REPID.
data: begin of itab1 occurs 0,
        HEADER1(10) TYPE C,
        HEADER2(10) TYPE C,
      end of itab1.
data: begin of itab occurs 0,
        vbeln like vbak-vbeln,
        posnr like vbap-posnr,
        MATNR LIKE VBAP-MATNR,
        MATWA LIKE VBAP-MATWA,
      end of itab.
select vbeln
       posnr
       MATNR
       MATWA
from vbap
up to 20 rows
into table itab.
w_catlog-seltext_l = 'HEADER1'.
w_catlog-datatype = 'CHAR'.
w_catlog-outputlen = 10.
W_CATLOG-tabname = 'ITAB1'.
append w_catlog2 to i_catlog2.
clear w_catlog2.
w_catlog-seltext_l = 'HEADER2'.
w_catlog-datatype = 'CHAR'.
w_catlog-outputlen = 10.
W_CATLOG-tabname = 'ITAB1'.
append w_catlog2 to i_catlog2.
clear w_catlog2.
w_catlog-seltext_l = 'Sales Document'.
w_catlog-datatype = 'CHAR'.
w_catlog-outputlen = 10.
w_catlog-fieldname = 'VBELN'.
W_CATLOG-tabname = 'ITAB'.
append w_catlog to i_catlog.
clear w_catlog.
w_catlog-seltext_l = 'ITEM'.
w_catlog-datatype = 'NUMC'.
w_catlog-outputlen = 6.
w_catlog-fieldname = 'POSNR'.
W_CATLOG-tabname = 'ITAB'.
append w_catlog to i_catlog.
clear w_catlog.
w_catlog-seltext_l = 'MATERIAL'.
w_catlog-datatype = 'CHAR'.
w_catlog-outputlen = 18.
w_catlog-fieldname = 'MATNR'.
W_CATLOG-tabname = 'ITAB'.
append w_catlog to i_catlog.
clear w_catlog.
w_catlog-seltext_l = 'Material entered'.
w_catlog-datatype = 'CHAR'.
w_catlog-outputlen = 18.
w_catlog-fieldname = 'MATWA'.
W_CATLOG-tabname = 'ITAB'.
append w_catlog to i_catlog.
clear w_catlog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = V_PGM
   IT_FIELDCAT                       = I_CATLOG2
TABLES
    T_OUTTAB                          = ITAB1
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = V_PGM
   IT_FIELDCAT                       = I_CATLOG
TABLES
    T_OUTTAB                          = ITAB
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

ALV Grid with Multiple Headers

Dear All ,
I want to know is it possible to display Multiple header in the ALV Grid Display it is possible in List Display that i dne but i want in
My requirment is :
            Header 1                                          |                           Header 2
   SubHeader 1       |   SubHeader 2              |    SubHeader 3      |   SubHeader 4
        R1                    |              R2                    |         R1                    |              R2                    |
        R1                    |              R2                    |         R1                    |              R2                    |
        R1                    |              R2                    |         R1                    |              R2                    |
        R1                    |              R2                    |         R1                    |              R2                    |
        R1                    |              R2                    |         R1                    |              R2                    |
        R1                    |              R2                    |         R1                    |              R2                    |
Header line 1 and Header line 2 in this format .
How it could be possible Please suggest or its not at all possible . Please suggest .
Thanks & Regards,
Aryan

>
Aryan@sap wrote:
> That i will do in end but i want with ALV Grid . If it wont be possible with ALV grid i will finally do with ALV List .
> If any solution possible through ALV Grid then Please Suggest .
Then go for ALV List. But i am not sure if you can achieve this using the method suggested by Soumyaprakash.
You can give it a try though.
It is possible because that I have seen in standard here i cant paste the screen shot . but how its comming tht i am not able to analysis .
This is news to me now. Which standard code are you referring to?
Good luck !!

Back from ALV Grid with multiple refresh

I have a report that from a selection screen shows an editable ALV Grid, and after I save it, it will refresh the grid.
My problem is when I hit the BACK button it returns to the "previous grid" instead of the selection screen
I am using the following:
WHEN 'BACK_C'.
LEAVE to SCREEN '0'.
How can I force it to go back to the selection screen?
sidenote: I have tried using call
selection-screen '1000'
but it adds a new problem as in the selection screen hitting back will return to the grid and I can never exit the report.

Neither solution works.
If it helps, I'm refreshing the grid with:
DATA : ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        e_grid = ref_grid.
ENDIF.
CALL METHOD ref_grid->refresh_table_display( ).
It seems when I refresh the grid it generates a completely independent grid screen and there's no way to skip them all and return to the selection screen.

Fieldcontent in field catalog in ALV GRID with leading blanks to be display

Hello,
I want to display the result of a report in an ALV Grid.
There are different columns in the ALV, one of them contains text, sometimes with leading blanks.
The ALV does not display the blanks, cut them and moves the rest to the left.
I have used LVC_S_FCAT-JUST with 'R' but this moves the content of the field only to the right (right justified), so that it looks like there is always a lot of blnks on the left side .
Is there any possibility to display blanks when they appear in the text field?
e.g.
TEXT1 (10)
9991-A
9950-B
9090-T
9675-N
Do´t ask, why there are leading blanks. It is always your customer or manager who determines the results!
Thank you very much for any hint that brings happiness into the face of this customer / manager.
Best regards
Dirk

Hi Sunil,
unfortunately this did not help!
But what can I expect, when the forum works the same.
e.g.
TEXT1 (10)
9991-A
9950-B
9090-T
9675-N
should more look like:
e.g.
TEXT1 (10)
9991-A
_9950-B
___9090-T
__9675-N
but without all the '_'.
Regards
Dirk

ALV grid with 2 headers

Similar Messages

Maybe you are looking for