ALV GRID with icon fields. When exports to Excel, icon fields are emtpy.

Hi all,
In our SAP system (6.0 ECC) we've noticed the following behaviour:
In ALV GRID with icons (color lights for example...) when we export the list to Excel format with the standard button bat, the icon column is always empty.
We think that in previous SAP version (4.7), the code corresponding to the icon appeared (For example @08@ for green light).
It's possible to have tha same functionality in this new version like in 4.7?
Regards.
Edited by: Ole ES on Nov 17, 2010 6:05 PM

Hi,
Check the format in which you export to Excel (MHTML, XML, ...) and try antoher one.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/66/79ad48157f11d2953700a0c930328a/content.htm
I think the integrated Excel mode shows '@08@'.
Best regards,
Guillaume

Similar Messages

  • ALV truncates last digit of field when exported to Excel.

    Hello SAPients!
    I have an ALV grid that truncates the last digit of one of the fields (VBELN) when it is exported to Excel. The field is defined with reference to the standard field VBRK-VBELN.
    I'm working on SAP 4.6C.
    Any idea?
    Thank you for your help

    That's funny.  Make sure the the outputlen is big enough.
    REgards,
    RIch Heilman

  • Cross Tab Formatting Problem when exported to excel

    Hi There,
    I got a problem with cross tab when exported to excel, Call_id field is occupying 4 cells. Below is the structure
    AssignedGroup-Call_Id-Total
    A--1001-
    A--1011-
    Total-----2-
    B--1021-
    B--1031-
    Total-----2-
    C--1041-
    Total-----1-
    can anyone help? How to restrict call_id to fit in single cell?
    Thanks,
    Jyothi
    Edited by: Jyothi Yepuri on Sep 16, 2009 7:50 AM

    Yeah.. crystal has giving  some issues while exporting reports without SPs, especialy previous versions.
    So  Better to install latest SP or patches for CR 10.0. I think SP 6 is the updated one for CR10.0.
    For More info Go through this link,
    http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR10
    Regards,
    Salah

  • Manipulate Layout on ALV Grid with dynamic table

    Dear all
    i'm generating a dynamic table depending of a date selection. That means that I show columns for weeks and the quantity of weeky migh change.
    Now the users wants to have a specific layout of the ALV grid with totals. When he saves the layout, only the weeks at this selection will show the next time he runs the programm with a larger selection.
    a) Is it possible to modify the layout during runtime by programming?
    b) Do you have any other ideas how to solve this problem?
    Thank you

    You don't know the names of your columns? hmm you do, because before you created dynamic table you had to create field catalog, so the structure and column names of newly (dynamically) created table will be the same like defined in the field catalog.
    The last loop also does not look good, in my opinion should be something like:
    LOOP AT lt_datatable +(my first table)+ ASSIGNING <ls_data4>.
        AT NEW pernr.
          APPEND initial line to <fs_1> assigning <fs_2>.
          <fs_2>-pernr = <ls_data4>-pernr.
        ENDAT.
        ASSIGN COMPONENT <ls_data4>-wage_type OF STRUCTURE <fs_2> TO <fs_5>.
        <fs_5> = <ls_data4>-amount.
    ENDLOOP.
    also keep in mind that number of calls of method cl_alv_table_create=>create_dynamic_table is limited to 36 (?) calls within one program session because it uses dynamic subroutine pool behind so you will have short dump if you will execute that 37 times.

  • Header of ALV with space when exported to excel using Standard ALV

    Hi,
    I am Using Reuse alv grid display    to dispaly my report and it works fine and I am using the standard SAP application tool to export it to excel.
    But for some of the header fields I am getting space in the excel sheet but there is no space while displaying through ALV.
    I am using the following field catalog for the same.
    wa_fieldcat-col_pos = 10.
      wa_fieldcat-fieldname = 'SOLLWERT'.
      wa_fieldcat-seltext_l  = 'text-t10'.      "Target value (* this has no space here)
      wa_fieldcat-outputlen = 32.
    wa_fieldcat-colwidth_optimize = 'X'.
      APPEND wa_fieldcat to it_fieldcat.
    but there are still space for this Colomn when exported to excel if after optimizing the column.
    kindly suggest what field needs to be passed to the field catalogoe to avoid spaces in excel for the header.
    Thanks
    Ritesh

    hey all,
    Thanks everyone for the reply.
    I am using the foloowing field cat:
    l_col_pos = l_col_pos + 1.
        wa_fieldcat-col_pos = l_col_pos.
        wa_fieldcat-outputlen = 32.            
         wa_fieldcat-fieldname = 'SOLLWERT'.
         wa_fieldcat-inttype   = 'P'.             
    *    wa_fieldcat-tabname = 'i_final'.      
        wa_fieldcat-seltext_l = text-t11.         "Target Value
        APPEND wa_fieldcat TO i_fieldcat.
        CLEAR wa_fieldcat.
    I have use this also in the field cat but stil i get space in the excel header.
    wa_fieldcat-REF_FIELDNAME = 'SOLLWERT'.
    *    wa_fieldcat-REF_TABNAME =  'QAMV'.
    Also the space comes with the descrip[tion in the cell of excel.
    its like [space Target Value] and i dont need this Space.
    I have also used  wa_layout-colwidth_optimize = 'X'. but it doesnt wrk.
    Please suggest

  • ALV grid with editable fields

    Dear Colleagues,
    I develop an ALV grid with OO standard methods. Before the first display of the table I define the editable fields. It works fine.
    I have a problem : if the table is empty and I press the standard icons "Append a line" or "Insert a line", the new line don't have the defined editable characteristics.for fields. Is there a standard method which I have forgotten ?
    Thanks a lot and kind regards
    Peter

    vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_delete_row.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_append_row.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_copy_row.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_insert_row.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_copy.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_cut.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_paste.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_undo.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
        vs_toolbar_excluding = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
        APPEND vs_toolbar_excluding TO i_toolbar_excluding.
    * Displaying the output in ALV Grid
        vs_layout_grid-no_rowmark = 'X'.
        vs_layout_grid-zebra      = 'X'.
        vs_layout_grid-cwidth_opt = 'X'.
        vs_layout_grid-edit       = 'X'.
        vs_layout_grid-ctab_fname = 'CT'.
        vs_layout_grid-stylefname = 'CELLTAB'.
        CALL METHOD v_grid->set_table_for_first_display
          EXPORTING
            i_save                        = 'X'
            is_layout                     = vs_layout_grid
            it_toolbar_excluding          = i_toolbar_excluding[]
          CHANGING
            it_outtab                     = itab[]
            it_fieldcatalog               = it_fieldcat[]
          EXCEPTIONS
            invalid_parameter_combination = 1
            program_error                 = 2
            too_many_lines                = 3
            OTHERS                        = 4.
        IF sy-subrc NE 0.
          MESSAGE 'ALV Grid display unsuccessful' TYPE 'I'.
          STOP.
        ENDIF.                             " IF sy-subrc NE 0
      ELSE.                                " IF w_custom_container...
    * Refresh the container if it already exists
        CALL METHOD v_grid->refresh_table_display
          EXCEPTIONS
            finished = 1
            OTHERS   = 2.
        IF sy-subrc NE 0.
          MESSAGE 'Refreshing the container is not successful' TYPE 'I'.
          STOP.
        ENDIF.                            

  • ALV Grid with Popup Window

    Hey @all,
    I want to make a ALV Grid with a Popup Window. The idea is that there is a field for notes and when you click on this field a popup window should be opened where you can insert more text or if text already exists only the first column of the text is shown in field until you click on the field.
    Is there any possibility to do it this way? Do I have to make a second Grid for this Popup Window? Do anybody have an example how to solve this problem?
    Thank you in advance for your answers!
    Greetings,
    Alexander

    *& Report  Z_VISHVAS_ALV1
    report  z_vishvas_alv1.
    type-pools: slis.
    data: begin of i_outtab occurs 0.
            include structure sflight.
    data:   w_chk type c.                  "For multiple selection
    data: end of i_outtab.
          I_OUTTAB TYPE SFLIGHT OCCURS 0,
    data: i_private type slis_data_caller_exit,
          i_selfield type slis_selfield,
          w_exit(1) type c.
    parameters: p_title type sy-title.
    start-of-selection.
      select * from sflight into table i_outtab.
      call function 'REUSE_ALV_POPUP_TO_SELECT'
           exporting
                i_title                 = p_title
                i_selection             = 'X'
                i_zebra                 = 'X'
              I_SCREEN_START_COLUMN   = 0
              I_SCREEN_START_LINE     = 0
              I_SCREEN_END_COLUMN     = 0
              I_SCREEN_END_LINE       = 0
                i_checkbox_fieldname    = 'W_CHK'
              I_LINEMARK_FIELDNAME    =
              I_SCROLL_TO_SEL_LINE    = 'X'
                i_tabname               = 'I_OUTTAB'
                i_structure_name        = 'SFLIGHT'
              IT_FIELDCAT             =
              IT_EXCLUDING            =
              I_CALLBACK_PROGRAM      =
              I_CALLBACK_USER_COMMAND =
               IS_PRIVATE             = I_PRIVATE
         importing
                es_selfield             = i_selfield
                e_exit                  = w_exit
           tables
                t_outtab                = i_outtab
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
       MESSAGE i000(0k) WITH sy-subrc.
      endif.
    *****the internal table is modified with a cross sign for marking the
    ***rows selected
      loop at i_outtab where w_chk = 'X'.
        write: /  i_outtab-carrid, i_outtab-price.
      endloop.

  • OO ALV grid with a header line is this possible?

    Howdy!
    I have a requirement where I need to produce an ALV grid with the following format:
    <b>Text 1     Text 2  Text 3                  Text 4
                              Text 6
    Col_1 Col_2 Col_3 Col_4 Col_5 Col_6 Col_7 Col_8 Col_9 
    Cell conents -
    Cell conents -
    Cell conents -
    Cell conents -
    Cell conents -
    </b>
    Anyone got any idea on how to get the 'TEXT' fields into the ALV grid? These are dynamic texts that would basically display details of data entered in the selection screen.
    The ALV title line is limited to 70 characters and I can't think of another way of doing this.
    The texts need to appear on the ALV grid becasue the user would like to download them to Excel in addition to the ALV cell contents using the standard ALV functionality.
    Any ideas would be appreciated!
    Message was edited by: Robert

    I'm thinking that this may not work because it is not a full screen grid and the grid container does not care about the container on top of it so, it most likely would not print it.   Implement this example program, you can see how this would work for you if you were using the FM.
    report zrich_0001
           no standard page heading.
    * Global ALV Data Declarations
    type-pools slis.
    data: begin of i_alv occurs 0,
          matnr type mara-matnr,
          end of i_alv.
    * Miscellanous Data Declarations
    data: fieldcat type slis_t_fieldcat_alv,
          events   type slis_t_event,
          list_top_of_page type slis_t_listheader,
          top_of_page  type slis_formname value 'TOP_OF_PAGE'.
    start-of-selection.
      perform initialization.
      perform get_data.
      perform call_alv.
    end-of-selection.
    *  Form  Initialization
    form initialization.
      clear i_alv.       refresh i_alv.
      perform eventtab_build using events[].
    endform.
    *  Form  Get_Data
    form  get_data.
      select matnr into table i_alv
                  from mara up to 100 rows.
    endform.
    *  CALL_ALV
    form call_alv.
      data: variant type  disvariant.
      data: repid type sy-repid.
      repid = sy-repid.
      variant-report = sy-repid.
      variant-username = sy-uname.
      perform build_field_catalog.
      perform comment_build using list_top_of_page[].
    * Call ABAP List Viewer (ALV)
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                it_fieldcat        = fieldcat
                i_callback_program = repid
                is_variant         = variant
                it_events          = events[]
                i_save             = 'U'
           tables
                t_outtab           = i_alv.
    endform.
    * EVENTTAB_BUILD
    form eventtab_build using events type slis_t_event.
    * Registration of events to happen during list display
      data: tmp_event type slis_alv_event.
      call function 'REUSE_ALV_EVENTS_GET'
           exporting
                i_list_type = 0
           importing
                et_events   = events.
      read table events with key name = slis_ev_top_of_page
                               into tmp_event.
      if sy-subrc = 0.
        move top_of_page to tmp_event-form.
        append tmp_event to events.
      endif.
    endform.
    * BUILD_FIELD_CATALOG
    form build_field_catalog.
      clear: fieldcat. refresh: fieldcat.
      data: tmp_fc type slis_fieldcat_alv.
      tmp_fc-reptext_ddic = 'Material'.
      tmp_fc-fieldname    = 'MATNR'.
      tmp_fc-tabname      = 'I_ALV'.
      tmp_fc-outputlen    = 18.
      append tmp_fc to fieldcat.
    endform.
    * COMMENT_BUILD
    form comment_build using list_top_of_page type
                                            slis_t_listheader.
      data: tmp_line type slis_listheader.
      clear tmp_line.
      tmp_line-typ  = 'H'.
      tmp_line-info = 'Here is a line of text'.
      append tmp_line to list_top_of_page.
      clear tmp_line.
      tmp_line-typ  = 'S'.
      tmp_line-key  = 'Key1'.
      tmp_line-info = 'Here is a value'.
      append tmp_line to list_top_of_page.
      clear tmp_line.
      tmp_line-typ  = 'S'.
      tmp_line-key  = 'Key2'.
      tmp_line-info = 'Here is another value'.
      append tmp_line to list_top_of_page.
    endform.
    * TOP_OF_PAGE
    form top_of_page.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                i_logo             = 'ENJOYSAP_LOGO'
                it_list_commentary = list_top_of_page.
    endform.
    Regards,
    Rich Heilman

  • Display amount in ALV Grid with different Decimal Places based on Currency

    HI Experts,
    Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2.
    we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
    im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
    AED---22.56
    KWD---225.65
    i need to display values like AED : 22.56

    HI Experts,
    Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2. we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
    im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
    AED---22.56
    KWD---225.65 (converting this value to 22.565 using BAPI_CURRENCY_GETDECIMALS according to currency in my Report)
    i need to display values like AED : 22.56
                                             KWD---22.565 but here field is NETWR with 2 decimal.
    Need to Display amount in ALV Grid with different Decimal Places based on Currency
    Regards,
    Dileep Kumar Reddy

  • ALV grid with 2 labels on the output

    Hi,
    I am trying ALV  Grid with two labels using Function modules.
    in the output, it should appear like...
    Header1 | Header2 | Header3 | Header4 |
    T21
    T22
    T31
    T32
    First line is for Header lable and second line is for item lable under corresponding Header labels.
    Pls. can any suggest me a solution for this..
    Thanks
    PRa

    Using the Gird Functions it is not possible, you can get the with the help of ALV list function.
    If you use this aproach you will loose some Functionalities, Your Report Output will Distorted.
    cehck this image..
    http://img100.imageshack.us/img100/3846/output6ef.th.gif
    REPORT ZTEST_ALV message-id zz .
    TYPE-POOLS: SLIS.
    DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
    L_LAYOUT type slis_layout_alv,
    x_events type slis_alv_event,
    it_events type SLIS_T_EVENT.
    DATA: BEGIN OF ITAB OCCURS 0,
    VBELN LIKE VBAK-VBELN,
    POSNR LIKE VBAP-POSNR,
    MALE type i,
    female type i,
    END OF ITAB.
    SELECT VBELN
    POSNR
    FROM VBAP
    UP TO 20 ROWS
    INTO TABLE ITAB.
    X_FIELDCAT-FIELDNAME = 'VBELN'.
    X_FIELDCAT-SELTEXT_L = 'VBELN'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS = 1.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    X_FIELDCAT-FIELDNAME = 'POSNR'.
    X_FIELDCAT-SELTEXT_L = 'POSNR'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS = 2.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    X_FIELDCAT-FIELDNAME = 'MALE'.
    X_FIELDCAT-SELTEXT_L = 'MALE'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS = 3.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    X_FIELDCAT-FIELDNAME = 'FEMALE'.
    X_FIELDCAT-SELTEXT_L = 'FEMALE'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS = 3.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    x_events-NAME = SLIS_EV_TOP_OF_PAGE.
    x_events-FORM = 'TOP_OF_PAGE'.
    APPEND x_events TO iT_EVENTS.
    CLEAR x_events .
    L_LAYOUT-NO_COLHEAD = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = SY-REPID
    IS_LAYOUT = L_LAYOUT
    IT_FIELDCAT = IT_FIELDCAT
    it_events = it_events
    TABLES
    T_OUTTAB = ITAB
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2.
    IF SY-SUBRC 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    FORM TOP_OF_PAGE.
    *-To display the headers for main list
    FORMAT COLOR COL_HEADING.
    WRITE: / SY-ULINE(103).
    WRITE: / SY-VLINE,
    (8) ' ' ,
    SY-VLINE,
    (8) ' ' ,
    SY-VLINE,
    (19) '***'(015) centered,
    sy-vline.
    WRITE: / SY-VLINE,
    (8) 'VBELN'(013) ,
    SY-VLINE,
    (8) 'POSNR'(014) ,
    SY-VLINE,
    (8) 'MALE'(016) ,
    sy-vline,
    (8) 'FMALE'(017) ,
    sy-vline.
    FORMAT COLOR OFF.
    ENDFORM.

  • ALV GRID with own EXCEL-Template

    Hallo,
    I have Problem with using ALV-Grid with a own created
    template.
    At First I copy the SAP_OM.XLS template to CUS_OM.XLS.
    Then I update it by deleting all sheets, but not RAWDATA.
    When I use this template in ALV-GRID, it would be the right one, but it his no Data.
    The security settings in Excel are correct.
    Can anyone help me to show the data like the normal
    ALV-GRID??
    thanks Dieter

    Hi
    Check this link...
    How to send data  to different tabs of an excel sheet?

  • Default collapsed view in ALV grid with subtotoal lines

    Hallo experts,
    I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
    Can any you help me finding this option.
    Thanks.
    Matt.

    Hallo experts,
    I am displaying a ALV grid with subtotals. Now my requirement to display the Grid with only subtotal lines. Means the grid should be displayed in collapsed mode by default.
    Can any you help me finding this option.
    Thanks.
    Matt.
    Hi Matt,
    Whe you call the FM REUSE_ALV_GRID_DISPLAY, you have to fill the table it_sort.
    In this table, you have to fill the field FIELDNAME with the field that you can show with susbstotals and fill the field EXPA with 'X'.
    W_SORT-SPOS = 1.
    W_SORT-FIELDNAME = 'CODIGO'.
    W_SORT-SUBTOT = 'X'.
    W_SORT-EXPA = 'X'.
    APPEND W_SORT TO IT_SORT.
    In the fieldcatalog there must be any with the field DO_SUM = 'X'
    You can maka this directly in the list by creating a variant with susbtotals, colapse them and save as a default variant for all users.
    Regards,
    Pepe
    Regards,
    Pepe

  • Binding ALV GRID with Deep Internal Table

    Hello all,
    I am looking for a way to display ALV Grid with the Deep ITAB.
    My ITAB is not too complex.
    It has One Structure which gets whole DB table + One extra field.
    Therefore my Itab looks as follows.
    TYPES: BEGIN OF TY_TRIP,
            ZPM_UPLOAD LIKE ZDBTABLE, "ZDBTABLE is custom database table.
            TDTIME TYPE STRING,
           END OF TY_TRIP.
    DATA: ITAB TYPE TABLE OF TY_TRIP,
          WA_ITAB LIKE LINE OF ITAB.
    Now i am able to populate data into Deep ITAB.
    If i call ALV Grid with ITAB then i get error. So how to call 'REUSE_ALV_GRID_DISPLAY' with this ITAB?
    Thanks in advance.

    Hello,
    My senior asked me to use the below definition.
    TYPES: BEGIN OF TY_TRIP.
            INCLUDE STRUCTURE ZDBTABLE.
    TYPES:  TDTIME TYPE STRING,
           END OF TY_TRIP.
    DATA: ITAB TYPE TABLE OF TY_TRIP,
          WA_ITAB LIKE LINE OF ITAB.
    If anyone else is looking to print in ALV, they can use this type of ITAB definition though it gives you the flexiblity to create ITAB and also making it FLAT and not DEEP.
    But i am still looking for an answer for my first post.
    Thanks.

  • Formatting of text fields when exporting from InDesign to Acrobat Pro

    How does one preserve the formatting  of a text field when exporting from InDesign CS6 to Acrobat Pro? It loses both the font and the alignment formatting in the PDF.

    Use a font that allows embedding/ check the font embedding settings in the PDF output settings.
    Mylenium

  • Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

    Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

    As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

Maybe you are looking for