ALV Layouts are missing in ECC6 after upgrade

Dear Friends,
we have an issue of missing ALV Layouts in ECC6 after upgrade of ECC6 from 4.7 version
For example, we have a custom table ZRCILOT, data displayed using tocde se16, but when we check layout are missing in ECC6 but the same exist in 4.7 version.
please check the attached screen-shots.
kindly suggest, is there any possibility to retrive it.
Thanks,
Munvar Basha.

Hello
Variants should be preserved by the upgrade...
You could export/import layout using the report from the here under note
Regards
551178 - FAQ ALV Layout
During the upgrade of or when importing Support Packages?
Answer: Layouts created by the customer are retained and you can continue to use them.
643330 - ALV layout: Importing and exporting layouts

Similar Messages

Report Layout variant missing in ECC6

Hi All,
we are going for upgrade from 4.6 to ECC6. In ECC6 in most of report's report layout variant are missing in ECC6.But our client want same variant in ECC6 as in 4.6.
Please sugest how to over come this issue.
Thanks
Mohit Khandelwal

Mohit,
I think you can try out this...
Include the variant in a transport request and give the transport req no to the basis guy; and inform him to import the same req no into ECC6 version.
He can export the transport req no from 4.6 to windows desktop and then he can import the same into ECC 6 system.
I hope this will solve your issue.
- Seenu
Edited by: Sreenivasulu Nallani on Jan 25, 2010 12:24 PM

Missing application icons after upgrade to 2.0

Missing application icons after upgrading to 2.0. Tetris, Clock and Voice recording icons are missing. Looks like the applications are still installed but they are not showing up with all the other icons.
There is absolutely nothing in the help about restoring icons.
Any ideas as to how I can get these missing icons to display again?
Thanks.

Great! Where was it?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

InfoObject is missing in report after upgrade

Hi,
My InfoObject Statistical ID is missing in Report after Upgrading from 3.5 to 7.0.
I did comparison of report before and after upgrade and found this issue.
the data content is the same but only this infoObject cannot be seen in the report
how do I correct this issue.
thanks
Edited by: Bhat Vaidya on Aug 6, 2008 12:24 PM

This not fixed. SAP couldn't explain why

Re: DW CC The usual choices for the Workspace Layout are missing. How can I restore them?

The usual choices for the Workspace Layout are missing. How can I restore them?The usual choices for the Workspace Layout are missing. How can I restore them?

The Insert panel has been reworked pretty significantly in DWCC (Spry has been dead for over a year now, so it no longer appears for instance), but can still be opened via Window > Insert then dragged to the toolbar location (to get the tabs back) by clicking and dragging the Insert tab up to the top of the application frame until it highlights. Once you drop it, it will then appear as a toolbar.
Not all of the tools will be visible at all times. DWCC knows when certain things can't technically be used and it won't display them if they can't be inserted.
EDIT: Oops, forgot to add this. Here is a link talking about what has changed in the Insert panel: http://helpx.adobe.com/dreamweaver/using/changes-insert-options-creative-cloud.html

HT203167 I am missing my audiobooks after upgrading ipod to new os

I am missing my audiobooks after upgrading ipod to new os.

Even though Apple iTunes has reached agreements with the Music and Film industries, they cannot offer Audiobooks over the Cloud.
So, when you buy an Audiobook, you must download it to your main machine and hold it there. If you upgrade your hardware (iPod, iPhone, or iPad) or IOS software, the audiobook on that device disappears and you will have to download it again from your main machine. This means wiring it up "old school" and not wifi.
As a consequence, it is advisable never to buy an audiobook from a portable device as it will not sync and will not be available for download elsewhere. I did this and I had to ask Apple to "push" a new file so that I could download it on my main machine.
Hope this helps.

Report variants missing in PC00_M10_REC after upgrade from 4.7 to ECC 6.0

After Upgrade to ECC 6.0 from 4.7 version, two variants for Payroll Reconciliation report in PC00_M10_REC are missing.
These variants were of users who have left the organisation/company.
Can anyone help me to restore those variants and tell me why those two variants got deleted.
Thanks in advance
Rohan Das.

Try to use program RSTRANSP , this will create transport request for variants. after creating the variant your basis team can move to ECC box
a®

Transactions missing in Role After Upgrade from 4.6c to ECC 6.0

Hello Friends,
I did multiple searches on this question but it was unsuccessful. We are upgrading from 4.6c to ECC 6.0. We are testing roles to make sure the migrate properly.
Irrespective of su25. There are transactions that are not obsolete and are missing in ECC 6.0
For example if I have a role called FIROLE. Which has 20 tcodes in 4.6c. When we upgrade to ECC 6.0 8 tcodes will be missing. This is not because the tcodes become obsolete.
What is the best way to approach this. Should we be testing each role?
Thanks!

Hello Imran,
transactions can be 'obsolete' also if they still exist.....
If the application developers create new functionality, new look,.... in new transactions but still let the 'old' ones in the system.
Just think about the ME2*-transactions..... The developer can decide, that such new transactions should replace the old ones after upgrade in the roles or let the old ones as they are.
You can get an overview about replaced/obsolete transactions by reviewing table PRGN_CORR2 (make sure, that you have the latest version, according to [SAP Note 991377|https://service.sap.com/sap/support/notes/991377] !!!). SU25 gets its information from that table.
b.rgds, Bernhard

Fonts Missing in Mail after upgrading to Leopard

After upgrading to Leopard, the fonts are missing in the font window in Mail program. I can compose only using what looks like helvetica. This is true only with this program. Any suggestions? Thanks

After an elimination process, it appeared that there was a conflict of some sort on one of the accounts I had and unfortunately, that was the one with the most messages. Its a pain but my only work around it was to start all over again with Mail. If it helps yo, this is what I did: a) backed up my Mail : user/library/mail and backed up the preference file : user/library/preferences/com.apple.mail.plist
b) removed the Mail preference : user/library/preferences/com.apple.mail.plist
c) restarted Mail and created the accounts all over again via the setup helper
d) imported the mail boxes from where I saved them including those in the 'pop' folder
Now I have they old messages available in a folder I renamed 'archived' that is in the "ON MY MAC" section of the side bar.
IT IS TEDIOUS AND I AM PRETTY SURE THERE IS A MORE ACCURATE SOLUTION OUT THERE TO THIS PROBLEM.

IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
Appearing following way
UI_APPR_XML_PROVISIONER_EMPTY_TABLE
UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
Any help on this will be appreciated.

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

ALV layout variant missing in background job.

hi guys,
Having problem on getting the default ALV layout variant when run the job in backgorund. Please advise any correction needed in the following code.
Thanks.
*& Include           Z_MM_KBR_AGSUBCONINV_MOD2                        *
MODULE status_0100 OUTPUT.
SET PF-STATUS '100'.
SET TITLEBAR '100'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module display_data OUTPUT
      text
MODULE display_data OUTPUT.
IF sy-batch IS INITIAL. "Foreground
IF w_container IS INITIAL.
    IF cl_gui_alv_grid=>offline( ) IS INITIAL.
*Creating the container
      CREATE OBJECT w_container
        EXPORTING
          container_name              = c_container
        EXCEPTIONS
          cntl_error                  = 1
          cntl_system_error           = 2
          create_error                = 3
          lifetime_error              = 4
          lifetime_dynpro_dynpro_link = 5
          OTHERS                      = 6.
      IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDIF.
*Creating the ALV GRID
    CREATE OBJECT w_grid
      EXPORTING
        i_parent          = w_container
        i_appl_events     = c_check
      EXCEPTIONS
        error_cntl_create = 1
        error_cntl_init   = 2
        error_cntl_link   = 3
        error_dp_create   = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    else.
     exit.
    ENDIF.
ELSE.
*Creating the ALV GRID
    CREATE OBJECT w_grid
      EXPORTING
        i_parent          = go_dock_container
        i_appl_events     = c_check
      EXCEPTIONS
        error_cntl_create = 1
        error_cntl_init   = 2
        error_cntl_link   = 3
        error_dp_create   = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      WRITE:/ 'Error in grid'.
    ENDIF.
     CREATE OBJECT w_grid
      EXPORTING i_parent = go_dock_container.
ENDIF.
*getting the variant option
    wa_variant-report     = sy-repid.
    wa_variant-username   = sy-uname.
    wa_layout-grid_title = sy-title.
    wa_layout-cwidth_opt = c_check.
    wa_layout-zebra       = c_check.
    wa_layout-no_f4       = c_check.
    wa_layout-sel_mode    = 'D'.
*Excluding the unwanted buttons
     PERFORM exclude_toolbar_buttons.
build field catalog.
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
      EXPORTING
        i_buffer_active        = c_check
        i_structure_name       = c_fcat_str
        i_bypassing_buffer     = c_check
      CHANGING
        ct_fieldcat            = t_fieldcat
      EXCEPTIONS
        inconsistent_interface = 1
        program_error          = 2
        OTHERS                 = 3.
    IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    loop at t_fieldcat into w_fieldcat.
     if w_fieldcat-FIELDNAME = 'AGING1'.
      W_FIELDCAT-NO_ZERO = 'X'.
      MODIFY t_fieldcat FROM W_FIELDCAT INDEX SY-TABIX.
     ENDIF.
    endloop.
Generate sort critria
    PERFORM generate_sort.
Create object of class lcl_event_receiver.
    CREATE OBJECT w_event.
Handler for events.
   SET HANDLER w_event->handle_top_of_page       FOR w_grid.
   SET HANDLER w_event->handle_print_top_of_page FOR w_grid.
   SET HANDLER w_event->handle_print_end_of_list FOR w_grid.
    SET HANDLER w_event->handle_hotspot_click     FOR w_grid.
*Displaying the alv
   IF NOT sy-batch IS INITIAL.
     PERFORM create_snp.
   ENDIF.
t_data = i_final.
    CALL METHOD w_grid->set_table_for_first_display
      EXPORTING
        i_save                        = 'A'
        is_layout                     = wa_layout
        is_variant                    = wa_variant
      CHANGING
        it_outtab                     = t_data
        it_fieldcatalog               = t_fieldcat
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDIF.
ENDMODULE.                 " display_data OUTPUT
*&      Module user_command_0100 INPUT
      text
MODULE user_command_0100 INPUT.
DATA: lt_rows TYPE lvc_t_row,
         w_rows TYPE lvc_s_row.
CASE sy-ucomm.
    WHEN c_back.
      LEAVE TO SCREEN 0.
    WHEN c_exit.
      LEAVE TO SCREEN 0.
    WHEN c_cancel.
      LEAVE TO SCREEN 0.
   WHEN 'BILDET'.
     CALL METHOD w_grid->get_selected_rows
       IMPORTING
         et_index_rows = lt_rows.
     CALL METHOD cl_gui_cfw=>flush.
     IF sy-subrc EQ 0.
       READ TABLE lt_rows INTO w_rows INDEX 1.
       READ TABLE i_vbfa INTO w_vbfa INDEX w_rows-index.
       IF sy-subrc EQ 0.
         CLEAR i_zbw_br_nf4.
         LOOP AT i_zbw_br_nf3 INTO w_zbw_br_nf3 WHERE
                     refkey = w_vbfa-v_vbeln.
           APPEND w_zbw_br_nf3 TO i_zbw_br_nf4.
         ENDLOOP.
call dialog screen and display new alv control
         CALL SCREEN 101 STARTING AT 10 5.
       ENDIF.
     ENDIF.
     WHEN 'NOTAF'.
     CALL METHOD w_grid->get_selected_rows
       IMPORTING
         et_index_rows = lt_rows.
     CALL METHOD cl_gui_cfw=>flush.
     IF sy-subrc EQ 0.
       READ TABLE lt_rows INTO w_rows INDEX 1.
       READ TABLE i_zbw_br_nf3 INTO w_zbw_br_nf3 INDEX w_rows-index.
       DATA docnum LIKE j_1bdydoc-docnum.
       docnum = w_zbw_br_nf3-docnum.
       SET PARAMETER ID 'JEF' FIELD docnum.
       CALL TRANSACTION 'J1B3N' AND SKIP FIRST SCREEN.
     ENDIF.
ENDCASE.
ENDMODULE.                 " user_command_0100 INPUT
*&      Form modify_col_name
      text
     -->P_<FCAT> text
     -->P_TEXT_H01 text
FORM modify_col_name USING pwa_fcat TYPE lvc_s_fcat
                             value(pw_text) TYPE any.
pwa_fcat-coltext   = pw_text.
pwa_fcat-scrtext_l = pw_text.
pwa_fcat-scrtext_m = pw_text.
pwa_fcat-scrtext_s = pw_text.
ENDFORM.                    " modify_col_name
      FORM display_hotspot                                          *
FORM display_hotspot USING pw_row_id    TYPE lvc_s_row
                           pw_column_id TYPE lvc_s_col.
FIELD-SYMBOLS <l_data> TYPE zbrforecast.
READ TABLE t_br_nf_acum ASSIGNING <l_data> INDEX pw_row_id-index.
CHECK sy-subrc = 0.
IF pw_column_id = ' '.
ENDIF.
ENDFORM.                    "display_hotspot
*&      Form generate_sort
      Genereate Sort criteria
FORM generate_sort.
Local variables
DATA: wal_sort TYPE lvc_s_sort,
       wl_pos   TYPE numc2.
wl_pos = 01.
sort ORDER
wal_sort-spos      = wl_pos.
wal_sort-fieldname = c_aufnr.
wal_sort-up        = c_check.
APPEND wal_sort TO t_sort.
ENDFORM.                    "generate_sort
*&      Form f4_variant
      text
     <--PW_VARI text
FORM f4_variant CHANGING pw_vari TYPE disvariant-variant.
wa_variant-report = sy-cprog.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant    = wa_variant
      i_save        = c_u
    IMPORTING
      es_variant    = wa_variant
    EXCEPTIONS
      not_found     = 1
      program_error = 2
      OTHERS        = 3.
IF sy-subrc IS INITIAL.
    pw_vari = wa_variant-variant.
ELSE.
    MESSAGE s208(00) WITH text-t04.
ENDIF.
ENDFORM.                    " f4_variant
*&      Form validate_layout
*This subroutine is to validate the layout
No parameters are passed to this subroutine
FORM validate_layout.
IF NOT p_layout IS INITIAL.
Check Layout
   wa_variant-report   = sy-repid.
   wa_variant-username = sy-uname.
   wa_variant-variant = p_layout.
   CALL FUNCTION 'LVC_VARIANT_EXISTENCE_CHECK'
     EXPORTING
       i_save     = c_u
     CHANGING
       cs_variant = wa_variant
     EXCEPTIONS
       OTHERS     = 01.
   IF NOT sy-subrc IS INITIAL.
     SET CURSOR FIELD 'P_LAYOUT'.
     MESSAGE s001(00) WITH text-t06 p_layout.
     STOP.
   ENDIF.
ELSE.
clear wa_variant.
ENDIF.
ENDFORM.                    " validate_layout
*&      Form validate_data
      text
FORM validate_data .
PERFORM validate_layout.
ENDFORM.                    " validate_data

Hi,
Before the call to method set_table_for_first_display, populate
wa_variant-report = sy-repid.
Best regards,
Prashant

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Widget Icon missing fro Dock after upgrade to 10.6

After upgrading to Snow Leopard, I noticed my Widget icon went missing from the dock.
I have also noticed that I cannot put additional application icons in the dock. They will stay there for a few seconds and then disappear. Anybody have any suggestions on what to do ??

This happened to me as well ... eventually. It was working for some time then poof! No matter how many re-installs from different download locations the dock still won't show up. The interesting thing is that after locating where the widgets itself were they would run after all ... just that the dock which I am so used to isn't there anymore. Perhaps thats a good thing and does make the desktop feel like Vista/Windows7 but I would rather have the option to turn the dock on/off at my convenience and keep everything in line.

Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
Issue is appaerently not unique for C4680 but also other HP equipment.
Has anyone encountered this malfunction? If yes were you able to resolve it and how?

Your screenshots are not appearing for me.
Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

ALV Layouts are missing in ECC6 after upgrade

Similar Messages

Maybe you are looking for