ALV problem with zeros

Hi guys,
   I have a problem in ALV. There is character field which is company code , whenever the value is '000'or 010' it is displaying as '0' or '10'. can you please help me on this. here is the field catelog for this... it is really urgent.
CLEAR e_fieldcat.
  ADD 1 TO w_col_pos.
  e_fieldcat-fieldname   = 'AUFNR'.
  e_fieldcat-seltext_m   = 'Company Code'.
  e_fieldcat-col_pos     = w_col_pos.
  e_fieldcat-no_zero = space.
  e_fieldcat-lzero = 'X'.
  e_fieldcat-edit_mask = '==ALPHA'.
  APPEND e_fieldcat TO t_fieldcat.
thanks.

Hi Lakshmi ,
wa_fieldcat-edit_mask = '==ALPHA'.
wa_fieldcat-edit_lzero = 'X'.
If this doesnt work.
<b>
Declare the field as type MARA-MATNR.
</b>
BCOZ conv routine for MATNR IS MATN1.
Usually, if all is well, this will be handled automatically, for example, if on a dynpro, all you need to do is set the conversion routine value to ALPHA, then the conversion will be automatic, nothing to code. If in a list display, the field should be TYPE MARA-MATNR, then the conversion will be automatic on the list display, as well as the ALV grid.
Reward points if helpful
Regards
Naresh

Similar Messages

  • ALV: Problem with toolbar event

    Hi ALV-experts,
    I have a dynpro with a header area where I display an ALV table. Below this I have a subscreen with a tabstrip control and two tabs.
    In the ALV toolbar I defined an own button. This button gets deactivated after pressing this button. I achieved this by the option "disabled" in the structure stb_button within the event handler for the toolbar event.
    This works all fine so far. If I start the dynpro and click on the button in the ALV-toolbar the buttons gets deactivated afterwards. But I have I jump between the tabs before I press the ALV-toolbar button, the button does not get deactivated.
    The debugger does not go into the event handler of the toolbar event. I also did system debugging of the method SET_TOOLBAR of the CL_GUI_ALV_GRID-class. Here I pass in both cases the command
    raise event toolbar e_object = m_cl_toolbar e_interactive = i_interactive.
    but in the second case (when I change the tabs before I press the button) the event handler is not executed and I don't know why. I also tried to register the event handler for all instances of the ALV still with the same result.
    The ALV method set_toolbar_interactive( ) did also not solve the problem.
    I couldn't find any SAP note about an issue for this event.
    Does anybody have an idea or a solution for this problem?
    EDIT:
    Problem solved, it was typo!
    Thanks in advance and regards,
    Martin
    Edited by: Martin Fischer on Jul 7, 2010 4:53 PM

    The problem was a typo!

  • SAP Gui 7.20 PLevel 3, ALV Problems with German Umlauts u00FCu00F6u00E4...

    Hi,
    we have updated our SAP Gui to version 7.20 lately and have some serious problems now with entering German Umlauts 'üöäÜÖÄß' into any editable ALV grid.
    This means when typing in e.g. 'ü', the grid immediately removes this character and replaces it by, well, by nothing. It just ignores this character at all.
    SAP Gui is currently at patch level 3 . The correct version is 7200.1.3.3190, build 1196830. Running German Windows XP clients with service pack 3. ERP is running SAP ECC 6.0.
    Is this a known problem? Has sbdy. a workaround this?
    Edit: Just found the release notes for SAP Gui 7.20 Lvl 3:
    2010/09/02     Texts get garbled while typing umlaut character in ALVGrid, Note 1503081
    This note, however, is not open for public view. OTH this means SAP was aware of this problem and tried to correct it to no avail so far.
    Thanks,
    Michael
    Edited by: Michael Fritz on Nov 19, 2010 11:19 AM

    Hi Martin,
    where did you get this info? Any official SAP note available? Do you encounter similar problems?
    We, too, noticed that uploading and downloading files from directories with German Umlauts, this fails now,too. There may be problems with files, too, however, we did not check this so far. The previous SAP Gui, I guess it was 7.10, didn't have any problems with this.
    I start wondering if SAP Germany have ever tested this? Or do they not use Umlauts anyway

  • Control ALV: Problem with Fieldcat buffer

    I have developed an ALV report using grid controls.
    However when i change the fieldcatalog(moving coloumns order and so....) and run again i dont see the effect on the list. I tried logging off and in but still same problem. Also is passed below buffer parameters also.
    What could be the issue with controls?
    Any hint/ideas greatly appreciated.
    Thanks.
        CALL METHOD GRID_100->SET_TABLE_FOR_FIRST_DISPLAY
          EXPORTING
            I_BYPASSING_BUFFER            = 'X'
            I_BUFFER_ACTIVE               = ' '
            IS_VARIANT                    = gv_variant
            I_SAVE                        = gv_save
            IS_LAYOUT                     = x_layout
          CHANGING
            IT_OUTTAB                     = <gt_table>
            IT_FIELDCATALOG               = it_fieldcat[]
            IT_SORT                       = it_sortcat[]
          EXCEPTIONS
            INVALID_PARAMETER_COMBINATION = 1
            PROGRAM_ERROR                 = 2
            TOO_MANY_LINES                = 3
            others                        = 4

    I just wanna let everyone know that <b>today</b> i suffered the same and exactly issue like in this entry. It was really causing me to bang my head -> wall like Rich....
    I couldn't see my result after i insert a new column and move a column...
    yeah, guys out there, when you move your ALV fieldcat... make sure you check your layout management tooo...
    otherwise you go around the world to look what's going on!....
    phew... thanks to this post... oh god!
    william wilstroth

  • Problem with zeros

    Hi!
    I'm developing a consulting application that connects to a DB2 database in an AS/400 server. The problem is that some fields of the database have leading zeros, for example, a bank account is "00005463..." Everything goes well, but when I'm trying to show the result in a JTextField, I can't get the leading zeros. What I do is to do a PreparedStament and then I call rs = getString("(some field)"); , but the text appears as "5463...". What I'm doing wrong? I'm trying with other methods, but I can get the zeros.
    Anyone knows a solution?
    Thanks a lot!!

    I really suspect that the field is not VARCHAR, or you are using a dodgy driver. Are u using the latest version of JTOpen?? http://www-124.ibm.com/developerworks/oss/jt400/
    Here is an example of using DecimalFormat:
    String unformattedNum = "23";
    java.text.DecimalFormat df = new DecimalFormat("0000000000000000");
    String formattedNum = df.format(Integer.parseInt(unformattedNum));
    System.out.println( unformattedNum + " -> " + formattedNum );

  • ALV problem (with filter use)

    Hi all !!
    When setting a filter on ALV grid (called with fm 'Reuse_alv_grid_display') after enter, the selection field are truncated at 10 bytes, also using a match code .
    the result of the list is consequently mistaken.
    Somebody know how to fix that ??
    Regards , Andrea

    Hi,
    Can you explain a little more? How are you setting the filter, and F4 at what place, is this a editable field which is having this issue?
    Regards,
    Ravi

  • Problems with Zero Duration .flv files

    I've recently had to troubleshoot issues with over 1200 .flv files that have an incorrect duration of 0 (zero).  I know that the keyframe data has information on the duration in these files, but I'm wanting to access this data programatically at run time and update the player so the seekbar works as expected.  After a frustrating series of searches, I've not come up with a solution and would like to know if anyone knows how to solve this issue.
    I know it's possible, since the same file loaded into the Akamai utility shows the duration as Zero, but the seek bar has the correct time.
    Thanks,
    D

    That's why you can't convert...you are converting the supported frame rates.
    yes, EditReady is TONS better. They are always on top of the latest AVCHD formats (every camera uses a different variant of AVCHD).  It used to be that they had two apps...EditReady for QT formats and  ClipWrap2 for AVCHD...but they have now rolled all of those features into EditReady...one app for everything. They have a free demo so you can try it and see for yourself.

  • ALV - Problem with checkbox.

    Dear All,
    I have created an ALV Grid Control and have one column as a check box.
    when i tick one checkbox in a line item i pop up a message saying "Do you wish to continue".
    If the user selects NO then i automatically want to deselect the checkbox.
    I tried clearing the work area of the internal table in the data change event.
    But when the alv is refreshed the checkbox is still ticked.What should be done to avoid this.
    Is freeing the custom container and creating it again everytime the user selects NO  a good option?
    Kindly suggest.
    Regards,
    Varun

    In ALV you put check box like
    X_FIELDCAT-FIELDNAME = 'CHK'.
    X_FIELDCAT-TABNAME = 'ITAB'.
    X_FIELDCAT-COL_POS = 1.
    X_FIELDCAT-INPUT = 'X'.
    X_FIELDCAT-EDIT = 'X'.
    X_FIELDCAT-CHECKBOX = 'X'.
    APPEND X_FIELDCAT TO IT_FIELDCAT.
    CLEAR X_FIELDCAT.
    in between you put logic
    IF CHK = 'X'
    *---popup_to_continue_yes_no
        PERFORM POPUP_TO_CONT_YES_NO.
    endif.
    FORM POPUP_TO_CONT_YES_NO .
      CALL FUNCTION 'POPUP_CONTINUE_YES_NO'
        EXPORTING
          TEXTLINE1 = 'Click OK to leave program'
          TITEL     = 'POPUP_CONTINUE_YES_NO'
        IMPORTING
          ANSWER    = ANS.
      IF ANS = 'J'.
        LEAVE PROGRAM.
      ENDIF.
    ENDFORM.                    " POPUP_TO_CONT_YES_NO

  • Replace: problem with zeros

    Hi to everybody
    I have tihs values
    31.800
      0.300
      2.100
    I should to get this
    31,800
    00,300
    02,100
    I use REPLACE ALL OCCURRENCES OF '.' IN lt_itob-id1 WITH ','  it is ok
    but I get an error if I use REPLACE ALL OCCURRENCES OF space IN lt_itob-id1  WITH '0' .
    Could you help me?
    Thanks a loto

    Hi,
    To Replace space with '0' use OVERLAY statement.
    DATA: l_val TYPE char6 VALUE '0.300'.
    REPLACE ALL OCCURRENCES OF '.' IN l_val WITH ',' .
    SHIFT l_val RIGHT DELETING TRAILING space.
    OVERLAY l_val WITH '000000'.
    WRITE l_val.
    Regards,
    Farheen

  • Problem with Export User's data from database oracle 11g

    i want export all user data and Its tables from oracle 11g database, I am using the comand exp, pero export only the tables with data, i Have Some tables and Not Without export data These tables,
    can someone help me!

    problem with zero extent table
    exp is de-supported in 11g. Use expdp instead to export tables without any rows.
    Srini

  • Problem with alv filter

    Hi all,
    I have a problem when i filter ALV column, which has data type  BELNR (FI doc No). I input in filter FI doc: 40000007 (8 char long, w/o zero ahead), then i get the empty result. The really one i want to get is a ALV line with FI doc = '40000007'.
    Could u pls help me?
    Thanks and regards,
    Hung.

    Check the field catalog for field BELNR, it should have conversion exit ALPHA. (check your report or execute [The Consistency Check|http://help.sap.com/saphelp_sm32/helpdata/EN/d6/23253963143e6ae10000000a11402f/frameset.htm])
    Regards,
    Raymond

  • Problem with the order of the columns of a ALV

    I have a problem with a ALV, variants we keep this ALV does not record the order of the columns
    Thank you

    I suppose you want to change the sequence of columns of a ALV. If you can change it by clicking 'settings' of right-top corner of ALV. After done you can save the new settings into a new. If you find some abnormal behaviour, please check the settings by WDA component "wd_analyze_config_user".
    FYI.
    [http://help.sap.com/saphelp_nw70/helpdata/en/32/f26f73d81e11d1a26f0000e8a5a614/frameset.htm]

  • ALV GRID Problem with reading contents

    Hi there! I'm quite new with ABAP and I have some problems with the syntax of it. Maybe I should first describe my aim and then I'll show you my code.
    1. I read contents from two database tables, called 'zbc_dan_registry' and 'zbc_dan_category'.
    'zbc_dan_registry' has 2 columns: name, value.
    zbc_dan_category' has 1 column: category.
    Now I want to have an ALV Grid, that displays the contents of 'zbc_dan_registry' and one additional column with dropdown fields, where the user can select a category for each row. This is, what my code already does.
    Now I want to save the contents of the whole table in a new table 'zbc_dan_registrz' (you see: 'registrz', not 'registry'!) with 3 columns:
    name, category, value.
    My problem is, how can I read the contents of the ALV Grid, with the user selected category for each row, and save them in an internal table? I've tried to adapt the code of "BCALV_EDIT_04", but I don't get it running.
    Some detailled help would be great, you know, I'm really working hard to understand ABAP, but it's really hard for me. Thanks for your support and help!!
    Here's my code so far:
    *& Report  ZBC400_DAN_TESTNO4
    REPORT  ZBC400_DAN_TESTNO4.
    DATA: lt_registrz TYPE TABLE OF zbc_dan_regstrz WITH HEADER LINE,
          lt_category TYPE TABLE OF zbc_dan_category WITH HEADER LINE,
          ls_category TYPE zbc_dan_category, "Struktur Kategorie
          ok_code LIKE sy-ucomm,
          container_r TYPE REF TO cl_gui_custom_container,
          grid_r TYPE REF TO cl_gui_alv_grid,
          gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_REG',
          fieldcat_r TYPE lvc_t_fcat,
          layout_r TYPE lvc_s_layo,
          lt_ddval TYPE lvc_t_drop,
          ls_ddval TYPE lvc_s_drop,
          c TYPE i.
    CLASS lcl_event_receiver DEFINITION DEFERRED.
      DATA g_verifier TYPE REF TO lcl_event_receiver.
      DATA: BEGIN OF gt_outtab OCCURS 0.
        INCLUDE STRUCTURE zbc_dan_regstrz.
        DATA: celltab TYPE lvc_t_styl.
      DATA: END OF gt_outtab.
    CLASS lcl_event_receiver DEFINITION.
      PUBLIC SECTION.
      TYPES: BEGIN OF lt_registrz_key.         "Struktur mit den Schlüsseln der Tabelle 'Registry'
        TYPES:  name TYPE zbc_dan_name,
                value TYPE zbc_dan_value,
                category TYPE zbc_dan_cat.
      TYPES: END OF lt_registrz_key.
      TYPES:  ls_registrz_keys TYPE STANDARD TABLE OF lt_registrz_key,
              ls_registrz_table TYPE STANDARD TABLE OF zbc_dan_regstrz.
      METHODS: get_inserted_rows EXPORTING inserted_rows TYPE ls_registrz_keys.
      METHODS: refresh_delta_tables.
      METHODS: handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
    *  METHODS: get_inserted_rows EXPORTING inserted_rows TYPE registrz_keys.
    *  METHODS: refresh_delta_tables.
      PRIVATE SECTION.
      DATA: inserted_rows TYPE ls_registrz_keys.
      DATA: error_in_data TYPE c.
      METHODS: get_cell_values IMPORTING row_id TYPE int4 pr_data_changed TYPE REF TO cl_alv_changed_data_protocol EXPORTING key TYPE lt_registrz_key.
    ENDCLASS.
    CLASS lcl_event_receiver IMPLEMENTATION.
      METHOD handle_data_changed.
        DATA: ls_good TYPE lvc_s_modi,
              ls_new TYPE lvc_s_moce.
        error_in_data = space.
        IF error_in_data = 'X'.
          CALL METHOD er_data_changed->display_protocol.
        ENDIF.
      ENDMETHOD.
      METHOD get_cell_values.
        CALL METHOD pr_data_changed->get_cell_value
          EXPORTING i_row_id = row_id i_fieldname = 'NAME'
            IMPORTING e_value = key-name.
        CALL METHOD pr_data_changed->get_cell_value
          EXPORTING i_row_id = row_id i_fieldname = 'VALUE'
            IMPORTING e_value = key-value.
        CALL METHOD pr_data_changed->get_cell_value
          EXPORTING i_row_id = row_id i_fieldname = 'CATEGORY'
            IMPORTING e_value = key-category.
      ENDMETHOD.
      METHOD get_inserted_rows.
        inserted_rows = me->inserted_rows.
      ENDMETHOD.
      METHOD refresh_delta_tables.
        clear me->inserted_rows[].
      ENDMETHOD.
    ENDCLASS.
    START-OF-SELECTION.
        SELECT client name value
          INTO CORRESPONDING FIELDS OF TABLE lt_registrz FROM zbc_dan_regstry.
        SELECT category INTO CORRESPONDING FIELDS OF TABLE lt_category FROM zbc_dan_category.
    CALL SCREEN 0100.
    MODULE user_command_0100 INPUT.
      CASE ok_code.
        WHEN 'BACK'.
          SET SCREEN 0.
          MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
        WHEN 'SAVE'.
          PERFORM save_data.
        WHEN OTHERS.
      ENDCASE.
    ENDMODULE.
    MODULE clear_ok_code OUTPUT.
      CLEAR ok_code.
    ENDMODULE.
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'DYNPRO100'.
      SET TITLEBAR 'D0100'.
    ENDMODULE.
    MODULE display_alv OUTPUT.
      PERFORM display_alv.
    ENDMODULE.
    FORM display_alv.
    IF grid_r IS INITIAL.
    *----Creating custom container instance
      CREATE OBJECT container_r
      EXPORTING
        container_name = gc_custom_control_name
      EXCEPTIONS
        cntl_error = 1
        cntl_system_error = 2
        create_error = 3
        lifetime_error = 4
        lifetime_dynpro_dynpro_link = 5
        others = 6.
        IF sy-subrc <> 0.
    *--Exception handling
        ENDIF.
    *----Creating ALV Grid instance
        CREATE OBJECT grid_r
        EXPORTING
          i_parent = container_r
        EXCEPTIONS
          error_cntl_create = 1
          error_cntl_init = 2
          error_cntl_link = 3
          error_dp_create = 4
          others = 5.
          IF sy-subrc <> 0.
    *--Exception handling
          ENDIF.
          CREATE OBJECT g_verifier.
          SET HANDLER g_verifier->handle_data_changed FOR grid_r.
    *----Preparing field catalog.
          PERFORM prepare_field_catalog CHANGING fieldcat_r.
    *----Preparing layout structure
          PERFORM prepare_layout CHANGING layout_r.
    *----Here will be additional preparations
    *--e.g. initial sorting criteria, initial filtering criteria, excluding
    *--functions
          CALL METHOD grid_r->set_table_for_first_display
          EXPORTING
    * I_BUFFER_ACTIVE =
    * I_CONSISTENCY_CHECK =
    * I_STRUCTURE_NAME =
    * IS_VARIANT =
    * I_SAVE =
    * I_DEFAULT = 'X'
            is_layout = layout_r
    * IS_PRINT =
    * IT_SPECIAL_GROUPS =
    * IT_TOOLBAR_EXCLUDING =
    * IT_HYPERLINK =
          CHANGING
            it_outtab = lt_registrz[]
            it_fieldcatalog = fieldcat_r
    * IT_SORT =
    * IT_FILTER =
          EXCEPTIONS
            invalid_parameter_combination = 1
            program_error = 2
            too_many_lines = 3
            OTHERS = 4.
          IF sy-subrc <> 0.
    *--Exception handling
          ENDIF.
          ELSE.
            CALL METHOD grid_r->refresh_table_display
    * EXPORTING
    * IS_STABLE =
    * I_SOFT_REFRESH =
          EXCEPTIONS
            finished = 1
            OTHERS = 2.
          IF sy-subrc <> 0.
    *--Exception handling
          ENDIF.
        ENDIF.
        CALL METHOD grid_r->register_edit_event
          EXPORTING
            i_event_id = cl_gui_alv_grid=>mc_evt_enter.
        CALL METHOD grid_r->register_edit_event
          EXPORTING
            i_event_id = cl_gui_alv_grid=>mc_evt_modified.
    ENDFORM.
    FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
      DATA ls_fcat TYPE lvc_s_fcat.
      CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
      EXPORTING
        i_structure_name = 'ZBC_DAN_REGSTR2'
      CHANGING
        ct_fieldcat = pt_fieldcat[]
      EXCEPTIONS
        inconsistent_interface = 1
        program_error = 2
        OTHERS = 3.
      IF sy-subrc <> 0.
    *--Exception handling
      ENDIF.
      LOOP AT pt_fieldcat INTO ls_fcat.
        CASE ls_fcat-fieldname.
          WHEN 'NAME'.
            ls_fcat-coltext = 'Name'.
            ls_fcat-outputlen = '40'.
            MODIFY pt_fieldcat FROM ls_fcat.
          WHEN 'VALUE'.
            ls_fcat-coltext = 'Wert'.
            ls_fcat-outputlen = '30'.
            MODIFY pt_fieldcat FROM ls_fcat.
          WHEN 'CATEGORY'.
              LOOP AT lt_category into ls_category.
                ls_ddval-handle = 1.
                ls_ddval-value = ls_category-category.
    *            ls_ddval-style = cl_gui_alv_grid=>mc_style_enabled.
                APPEND ls_ddval TO lt_ddval.
             ENDLOOP.
             CALL METHOD grid_r->set_drop_down_table
                EXPORTING it_drop_down = lt_ddval.
            ls_fcat-edit = 'X'.
            ls_fcat-drdn_hndl = '1'.
            ls_fcat-coltext = 'Kategorie'.
            MODIFY pt_fieldcat FROM ls_fcat.
        ENDCASE.
      ENDLOOP.
    ENDFORM.
    FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
      ps_layout-zebra = 'X'.
      ps_layout-grid_title = 'Kategorie zur Registry hinzufügen'.
      ps_layout-smalltitle = 'X'.
    ENDFORM.
    FORM save_data.
      DATA: ls_ins_keys TYPE g_verifier->ls_registrz_keys,
            ls_ins_key TYPE g_verifier->lt_registrz_key,
            ls_registrz TYPE zbc_dan_regstrz,
            ls_outtab LIKE LINE OF gt_outtab,
            lt_instab TYPE TABLE OF zbc_dan_regstrz.
      CALL METHOD g_verifier->get_inserted_rows IMPORTING inserted_rows = ls_ins_keys.
      LOOP AT ls_ins_keys INTO ls_ins_key.
        READ TABLE gt_outtab INTO ls_outtab
        WITH KEY  name = ls_ins_key-name
                  value = ls_ins_key-value
                  category = ls_ins_key-category.
        IF sy-subrc = 0.
          MOVE-CORRESPONDING ls_outtab TO ls_registrz.
          APPEND ls_registrz TO lt_instab.
        ENDIF.
      ENDLOOP.
      INSERT zbc_dan_regstrz FROM TABLE lt_instab.
      CALL METHOD g_verifier->refresh_delta_tables.
      ENDFORM.

    Hi Hans,
    You raised the Question in the Webdynpro ABAP forum. Here its very diffcult to get the answer from this forum. Please close it here and raise the same question in ABAP General Forum there you will get faster and so many anwsers.
    Please close the question here.
    Warm Regards,
    Vijay

  • I have a problem with ALV Grid User Command?

    Hi Experts,
    I have a problem with ALV GRID User Command.
    I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I  created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
    Here is my code.
    FORM user_command_alv  USING u_ucomm TYPE sy-ucomm
                           us_self_field TYPE slis_selfield.
    CASE u_ucomm.
    WHEN '&IC1'.
    READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
            WHEN 'ORDER'.
              IF NOT wa_final-order IS INITIAL.
                SET PARAMETER ID 'COK' FIELD wa_final-order.
                CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
              ENDIF.
    endform.
    PARAMETER ID 'COK'  also the standard one.
    Could you please help me out, Where I did wrong?
    If I select any order, that order only should display.
    Thanks in advance.
    Regards,
    Sarayu.
    Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

    hi,
    Please check it once the Paramater ID is 'ANR' for IW33 order number.
    Hope this may help.
    Regards,
    Sravanthi

  • Problem with ALV Grid Hotspot

    Hi ,
    I am having a problem with Hotspot <<removed_by_moderator>>
    I need to Open up SE16 and need to skip the first screen of the Table 'ZLE_WH01' and display the selection screen with the MATNR passed from my ALV Report.
    I tried using Call Transaction and Submit commands, but couldn't achive my target.
    when I used SUBMIT and pass the MATNR Value to the SE16 selection screen for the corresponding Table, the value is appearing in the MATNR field of the Selection screen but the Execute button is not working.
    When I try the Call Transaction Method, the value is not capturing in the 2nd screen. Table name is capturing in the first screen.
    Kindly advice me how to resolve this issue.
    Regards,
    Srinivas
    Edited by: Vijay Babu Dudla on Feb 25, 2009 11:08 PM

    For se16
    Use fm SE16N_INTERFACE
    a®

Maybe you are looking for