ALV Repot - RFC -Urgent
Hi Expets,
My requirment is i have to check the duplicate records like if there are two materials with the same material description yet different material number.
But this should check other system (also SAP),
My question is can i use
CALL FUNCTION 'functionname' DESTINATION name will work?
please share the above or any other alternative is there.
Thanks in advance
Rams
Message was edited by:
ramesh
Message was edited by:
ramesh
Hi Rams,
can you explain a bit more what you want to do?
My understanding is, that you want to call a function module in another SAP system using CALL FUNCTION 'functionname' DESTINATION. From this function module you receive a table that you later want to display in an ALV grid, is this correct?
I don't see a problem why it shouldn't work like this.
kind regards,
Timo
Similar Messages
-
Regarding RFC [ URGENT ]
Hello Experts
I am updating a table in SCM server with the data from R/3 tables. I am using RFC with destination.
I created an FM[RFC] in R/3
I created a program in SCM, in that i am calling that RFC.
I created a dummy RFC in SCM with the same paramters.
When i am executing the FM in R/3 i could able to fetch the data as output including some return value.
But when i am executing the program which is calling the RFC i am not getting the data.
But i am able to get the return value in R/3 FM[RFC]*
So i am sure that logical destination name is working
[ call 'FM' destination 'dest name' ].
My problem is i am not getting the data to the SCM server eventhogh i could able to get data in R/3 and I could able to connect to remote server.
*Guys Kindly let me know the solution for this it's a bit urgent
thanks in advance
PramodHi Pramod,
In the RFC function place the code as infinate loop. like
Data : x type c.
do.
if not x is initial.
exit.
endif.
enddo.
when you execute this the process will stop in this loop. Go to SM50 and select the process in debug mode. And in the debug mode you can change the value of x. then you can continue from that step in debug mode and you can trace.
Regards
Ganesh -
Logic for Refreshing the ALV Report (Very Urgent)
Hi Experts,
My <b>ALV report</b> needs a <b>refresh button</b> on the output.
The <b>Refresh button</b> should be available to allow user to keep this report on screen and <b>refresh regularly</b> rather than <b>going back</b> and <b>running it again.</b>
I am using <b>Function modules</b> and not <b>OOPS Concept</b> here.............As i am<b> unaware</b> of OOPS Please provide me solution in <b>FM's Only</b>.
Kindly send me <b>sample logic</b> for this, <b>Very urgent</b> if ur reply is helpfull.... u will be <b>rewarded heavily</b>.......................
THanks in advance.
Rajesh KumarHi,
This mean to say that if you have a 'refresh' push button in your gui status, every time you press the button, the list should get refreshed.
In ALV, to refresh the table you have to call the method "refresh_table_display".
It has the syntax very similar to creating the table.
It has two parameters. In the first one, you can mention if you want to refresh only the data (the icons are not refreshed)
or
if you want to refresh only the icons around the grid (the data is not refreshed - this option is mostly not used in day to day applications).
the synatx is :-
call method grid (name of grid )->refresh_table_display
exporting
IS_STABLE = <STRUCT OF TYPE LVC_S_STBL> (THIS IS FOR DATA REFRESHING)
I_SOFT_REFRESH = <VARIABLE OF CHAR 01> (THIS IS FOR ICON REFRESHING).
Regards,
Bhaskar -
Header and Footer in ALV.. URGENT
Hi All,
I want to print Header and Footer in ALV list/grid. Like in header, i want page no.( 1 of 10), UserName, Report Name etc.. and in Footer, I need selection screen criteria. For this I am using a function module (FM_SECECTOIN_CRITERIA_PRINT).
Where exactly should i code this part in my program.
Regards,
Parvez.Check this link -
http://www.sap-img.com/abap/test-alv-display-with-header-footer.htm
http://www.sap-img.com/fu037.htm
http://www.sap-img.com/abap-function.htm
Regards,
Amit -
Header is not coming in alv list display- urgent
hi all,
i am sending my code below....
my requirement is in selection screen i have 4 radio buttons . if i click 1 radio button it will duiisplay data and and its header. report is working fine. my requirement id when i click r_mssng radio button(missing radio button) it is showing data correctsly. here i want to show header as 'Missing details report'.
this is not coming in my report. anybody can suggest me.
i am sending my code below....
report zvra0001ftb13 message-id zv.
Confidential and Proprietary
* Celestica Corporation
* All Rights Reserved
*ABAP Name: ZVRA0001FTB13
*Created by: Srinivasa Chakravarthi
*Created on: 26/03/2003
*SAP Version: 4.6 C
*Description: This report displays details of foreign trades
and EHS based on the deliveries made to the outside
countries.
*Input: Selection Screen Criteria includes country of
origin,Company code, Sales Organisation,
Ship-to-party, Sold-to-paarty, Goods movement date,
Invoice number, Invoice type, Material , Material
Type, Exporter ID, Province of origin.
*Output: ALV output that contains Mode of Transport, Export
HS number, Commodity Description, Quantity, UOM,
Value, Country of Destination, Goods Origin
*Dependency: Nil
*Modification Log:
*CR# Date Coded Transport Description
*====== ======== ========= ============= ===============================
*5147 26/03/2003 Srinivas ED1K922286 New Development
*8700 02/11/2004 H.Arular ED1K938380 To check if entries of Comm
Code(HS code)is less than 8
digits and give a warning
message.
*18684 25/07/2007 MAHEEDHAR Merge the logic from report
ZVRA0001FTB13_ERROR into
report ZVRA0001FTB13 and
added two radio buttons
called missing data and non
missing data, addedc logic
accoriding to the radio
buttons.
*Declaring Tables.
tables: likp, "Delivery document Header
lips, "Delivery Document Item
vbfa, "Sales document Flow
bkpf, "Accounting Document Header
eikp, "Foreign Trade:Export/Import Data
eipo, "Foreign Trade:Export/ Import
"Header data
t618t, "Forein Trade:Mode of Transport
"Description
t604t, "Foreign Trade: Commodity Code/
"Import Code number Description.
mara, "Material master data.
t005, "Countries
t001, "Company Codes
tvko, "Sales Organisations
kna1, "Customer Master
t003, "Document types
t134, "Material types
tvfk,
konv,
vbrk.
constants : c_rep like vbrk-fkart value 'YGFB',
c_for(10) value 'Foreign'.
*Decalre Type pool for ALV
type-pools: slis.
*Type declaration for LIKP.
types: begin of t_data1,
vbeln like likp-vbeln, "Delivery
kunnr like likp-kunnr,
end of t_data1.
*Type declaration for LIPS,VBFA.
types: begin of t_data2,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
vbelv like vbfa-vbelv, "Preceding SD document
posnv like vbfa-posnv, "Preceding item of SD document
matnr like lips-matnr, "Material Number
meins like lips-meins, "Base unit of measure
lfimg like lips-lfimg, "Actual Quantity Delivered
mtart like mara-mtart,
end of t_data2.
**Type declaration for BKPF.
*types: begin of t_data3,
belnr like bkpf-belnr, "Accounting Documnet number
bukrs like bkpf-bukrs, "Company Code
end of t_data3.
*Type declaration for BKPF.
types: begin of t_data3,
vbeln like vbrk-belnr, " Billing Doc
fkart like vbrk-fkart,
land1 like vbrk-land1,
end of t_data3.
*Type declaration for EIPO.
types: begin of t_data4,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
matnr like vbrp-matnr,
fkimg like vbrp-fkimg,
meins like vbrp-meins,
verld like eipo-verld, "Country of dispatch for Foreign
"trade
herkl like eipo-herkl, "Country of origin of material
grwrt like eipo-grwrt, "Statistical value for Foreign
" trade
stawn like eipo-stawn, "Commodity code for foreign trade
expvz like eikp-expvz, "Mode of transport for foreign
"trade
end of t_data4.
*Type declaration for T618T.
types: begin of t_data5,
land1 like t618t-land1, "Country key
expvz like t618t-expvz, "Mode of Transport
bezei like t618t-bezei, "Description
end of t_data5.
*Type declaration for T604T.
types: begin of t_data6,
land1 like t604t-land1, "Country key
stawn like t604t-stawn, "Commodity Code
text1 like t604t-text1, "Description
end of t_data6.
*Type declaration for T604T.
types: begin of t_mara,
matnr like mara-matnr,
end of t_mara.
types : begin of rep_val,
vbelv like vbfa-vbelv,
posnv like vbfa-posnv,
vbeln like vbfa-vbeln,
posnn like vbfa-posnn,
uepos like vbap-uepos,
posnr like vbap-posnr,
netwr like vbap-netwr,
end of rep_val.
types : begin of t_price,
vbeln like vbak-vbeln,
posnr like vbap-posnr,
knumv like konv-knumv,
kposn like konv-kposn,
kbetr like konv-kbetr,
kpein like konv-kpein,
end of t_price.
data : t_sord type rep_val occurs 0 with header line.
data : t_dord type rep_val occurs 0 with header line.
data : t_rord type rep_val occurs 0 with header line.
data : t_hord type rep_val occurs 0 with header line.
data : t_ford type rep_val occurs 0 with header line.
data : i_price type t_price occurs 0 with header line.
data : i_price1 type t_price occurs 0 with header line.
data : i_mara type t_mara occurs 0 with header line.
data : i_sort type slis_t_sortinfo_alv.
DATA: t_layout TYPE slis_layout_alv.
*Declaring Selection screen.
selection-screen begin of block b1 with frame title text-101.
select-options:
s_verld for eipo-verld, "Country of Dest.
s_bukrs for bkpf-bukrs, "Company code
s_vkorg for likp-vkorg, "Sales Organisation
s_kunnr for likp-kunnr, "Ship-to-Party
s_kunag for likp-kunag, "Sold-to-party
s_wadat for likp-wadat_ist, "Goods Movement date
s_belnr for vbrk-vbeln, "Invoice number
s_blart for vbrk-fkart. "Invoice type.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-101.
select-options:
s_matnr for mara-matnr, "Material
s_mtart for mara-mtart. "Material Type
selection-screen end of block b2.
selection-screen begin of block b3 with frame title text-101.
parameters:
p_export(30) type c default '1366770724RM' obligatory , "Exporter ID
p_provi(30) type c default 'ONTARIO' obligatory ,
p_sumid(30) type c default 'SUM0704'.
"Province of Origin
selection-screen end of block b3.
selection-screen begin of block b4 with frame title text-104.
parameters:
r_summ radiobutton group zsum,
r_dets radiobutton group zsum,
r_mssng radiobutton group zsum, " maheedhar
R_NMSNG RADIOBUTTON GROUP ZSUM. " MAHEEDHAR
selection-screen skip.
parameter : p_sum as checkbox .
selection-screen end of block b4.
selection-screen begin of block b5 with frame title text-105.
select-options : s_i_kun for likp-kunnr.
selection-screen end of block b5.
*Data Declaration
data: i_fieldcat type slis_t_fieldcat_alv.
data: l_fieldcat type slis_fieldcat_alv .
data: v_lin type i.
data: v_lfstk type c value 'C'.
data: v_vbtyp type c value 'U'.
data: i_data1 type t_data1 occurs 0 with header line.
data : begin of t_T005t occurs 0.
include structure t005t.
data : end of t_t005t.
data: i_data2 type t_data2 occurs 0 with header line.
data: t_delv type t_data2 occurs 0 with header line.
data: t_bild type t_data2 occurs 0 with header line.
data: i_data3 type t_data3 occurs 0 with header line.
data: i_data4 type t_data4 occurs 0 with header line.
data: i_data5 type t_data5 occurs 0 with header line.
data: i_data6 type t_data6 occurs 0 with header line.
*Declare Internal table for ALV output.
data: begin of i_output occurs 0,
belnr like vbrk-vbeln,
posnr like vbrp-posnr,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
strlen, "ED1K938380
end of i_output.
maheedhar-start.
data : i_output1 like i_output occurs 0 with header line,
i_output2 like i_output occurs 0 with header line.
maheedhar-end
data : buff_out like i_output occurs 0 with header line.
data: begin of t_outsum occurs 0,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
end of t_outsum.
data : v_ans.
data : variante LIKE disvariant.
data : v_repid LIKE sy-repid.
data : wa_listheader TYPE slis_listheader.
data : t_listheader TYPE slis_t_listheader.
data : b_text(250).
data: evntS type slis_t_event with header line. " MAHEEDHAR
EVENT AT SELECTION-SCREEN
at selection-screen.
*For Autorisation check
perform authorisation_check.
Validation of Selection screen
perform check_entry.
EVENT START-OF-SELECTION
start-of-selection.
*Get data
perform select_data.
**For calling ALV function modules
MAHEEDHAR - START
if r_mssng eq 'X'.
DELETE I_OUTPUT WHERE BEZEI NE SPACE AND
STAWN NE SPACE AND
HERKL NE SPACE AND
VERLD NE SPACE.
DESCRIBE TABLE I_OUTPUT LINES V_LIN.
IF V_LIN > 0.
PERFORM DISPLAY_OUTPUT.
ELSE.
MESSAGE E000 WITH TEXT-130.
ENDIF.
elseif R_SUMM eq 'X' OR R_DETS EQ 'X'. "ENDIF. " MAHEEDHAR
MAHEEDHAR-END
describe table i_output lines v_lin.
if v_lin > 0.
buff_out[] = i_output[].
Begin of ED1K938380
delete buff_out where stawn ne space or "ED1K938380
verld eq space or
herkl eq space.
delete buff_out where strlen ne 'X' or
verld eq space or
herkl eq space.
End of ED1K938380
describe table buff_out lines v_lin.
Lines with no commodity code exists.
if v_lin gt 0.
concatenate text-902 text-903 into b_text.
concatenate text-906 text-907 into b_text. "ED1K938380
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = Text-901
TEXT_QUESTION = b_text
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = v_ans.
if v_ans eq '1'.
perform display_output.
endif.
else.
perform display_output.
endif.
else. " MAHEEDHAR
message e000 with text-130.
endif.
MAHEEDHAR-START
*"-- If non missing details radiobutton is selected
elseif r_nmsng = 'X'.
*"-- move data from i_output to i_output1.
i_output1[] = i_output[].
sort i_output by belnr.
sort i_output1 by belnr.
*"-- to get missing data
delete i_output1 where bezei ne space and
stawn ne space and
herkl ne space and
verld ne space.
loop at i_output.
*"-- compare two int tables with respective document number
read table i_output1 with key belnr = i_output-belnr.
if sy-subrc ne 0.
move-corresponding i_output to i_output2.
append i_output2.
clear i_output2.
endif.
endloop.
describe table i_output2 lines v_lin.
if v_lin gt 0.
perform display_output.
else.
message e000 with text-130.
endif.
MAHEEDHAR-END.
ENDIF. " MAHEEDHAR
FORM SELECT_DATA *
form select_data.
Data:l_strlen type i. "ED1K938380
*Get details from LIKP.
if s_i_kun[] is initial.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' .
else.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
( ( likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' )
or
likp~kunnr in s_i_kun and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' ) .
endif.
if sy-subrc ne 0.
message e000 with text-200.
endif.
*Get details from table LIPS
select lips~vbeln
lips~posnr
vbfa~vbeln
vbfa~posnn
lips~matnr
lips~meins
lips~lfimg
mara~mtart
from lips
inner join vbfa on vbfavbelv = lipsvbeln
and vbfaposnv = lipsposnr
inner join mara on maramatnr = lipsmatnr
into table i_data2
for all entries in i_data1
where
lips~vbeln = i_data1-vbeln and
lips~matnr in s_matnr and
vbfa~vbeln in s_belnr and
mara~mtart in s_mtart and
vbfa~vbtyp_n = 'U'.
if sy-subrc ne 0.
message e000 with text-201.
endif.
t_delv[] = i_data2[].
t_bild[] = i_data2[].
sort t_delv by vbeln.
delete adjacent duplicates from t_delv comparing vbeln.
sort t_bild by vbeln ascending vbelv descending.
delete adjacent duplicates from t_bild comparing vbeln.
*Get details of Accounting document number
select vbeln fkart land1 from vbrk
into table i_data3
for all entries in t_bild
where vbeln = t_bild-vbelv and
bukrs in s_bukrs and
fkart in s_blart and
vkorg in s_vkorg and " MAHEEDHAR
land1 in s_verld. " MAHEEDHAR
sort i_data3.
*Get details from EIPO.
select vbrp~vbeln
vbrp~posnr
vbrp~matnr
vbrp~fkimg
vbrp~meins
eipo~verld
eipo~herkl
eipo~grwrt
eipo~stawn
eikp~expvz
from eikp
inner join vbrp on vbrp~vbeln = eikp~refnr
inner join eipo on eikp~exnum = eipo~exnum
and eipo~expos = vbrp~posnr
into table i_data4 for all entries in i_data3
where vbrp~vbeln = i_data3-vbeln.
eipo~verld in s_verld.
if sy-subrc ne 0.
message e000 with text-201.
endif.
IF R_MSSNG NE 'X' or r_nmsng = 'X'. " MAHEEDHAR
perform get_price.
ENDIF. " MAHEEDHAR
Get details from T618T.
select land1
expvz
bezei
from t618t
into table i_data5
for all entries in i_data4
where
land1 = 'CA' and " Getting for Canada only
expvz = i_data4-expvz and
spras = sy-langu.
select matnr from mara into table i_mara where matnr in s_matnr
and mtart in s_mtart.
Get details from T604T.
select land1
stawn
text1
from t604t
into table i_data6
for all entries in i_data4
where
land1 = i_data4-VERLD and
stawn = i_data4-stawn and
spras = sy-langu.
select * from T005t into table t_T005t where spras = sy-langu.
loop at i_data3.
loop at i_data4 where vbeln eq i_data3-vbeln.
clear : i_data1, i_data2.
read table i_data2 with key vbelv = i_data4-vbeln
posnv = i_data4-posnr.
read table i_data1 with key vbeln = i_data2-vbeln.
if not s_i_kun[] is initial.
check ( ( i_data1-kunnr in s_i_kun ) or
( i_data3-land1 in s_verld ) ).
else.
check i_data3-land1 in s_verld .
endif.
read table i_mara with key matnr = i_data4-matnr.
if sy-subrc eq 0.
read table i_data5 with key expvz = i_data4-expvz .
land1 = i_data3-land1.
read table i_data6 with key stawn = i_data4-stawn
land1 = i_data4-VERLD.
move i_data4-vbeln to i_output-belnr.
move i_data4-posnr to i_output-posnr.
move i_data5-bezei to i_output-bezei.
move i_data6-text1 to i_output-text1.
Begin of ED1K938380.
l_strlen = strlen( i_data4-stawn ).
if l_strlen < 8.
move 'X' to i_output-strlen.
endif.
End of ED1K938380.
move i_data4-stawn to i_output-stawn.
move i_data4-meins to i_output-meins.
read table t_T005t with key land1 = i_data3-land1.
move t_t005t-landx to i_output-verld.
if p_sum eq space.
if i_data4-herkl ne 'CA'.
i_output-herkl = c_for.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
move i_data4-fkimg to i_output-quantity.
if i_data3-fkart eq c_rep.
read table t_dord with key vbeln = i_data4-vbeln
posnn = i_data4-posnr.
if sy-subrc eq 0.
read table t_sord with key vbeln = t_dord-vbelv
posnn = t_dord-posnv.
if sy-subrc eq 0.
read table t_hord with key vbeln = t_sord-vbelv
posnr = t_sord-posnv.
if sy-subrc eq 0.
read table t_ford with key vbeln = t_hord-vbeln
posnr = t_hord-uepos.
if sy-subrc eq 0.
read table i_price with key vbeln = t_ford-vbeln
posnr = t_ford-posnr.
if sy-subrc eq 0.
read table i_price1 with key knumv = i_price-knumv
kposn = t_ford-posnr.
if sy-subrc eq 0.
if i_price1-kpein ne 0.
i_output-value =
( i_price1-kbetr / i_price1-kpein ) *
i_data4-fkimg.
endif.
endif.
endif.
endif.
endif.
endif.
endif.
else.
move i_data4-grwrt to i_output-value.
endif.
append i_output.
clear i_output.
clear : i_data5, i_data6.
endif.
endloop.
endloop.
sort i_output by verld herkl bezei stawn.
endform.
FORM DISPLAY_OUTPUT *
This form is to create the ALV output
form display_output.
data: xevents type slis_t_event,
ls_event type slis_alv_event,
slis_ev_top_of_page type slis_formname value 'TOP_OF_PAGE',
slis_ev_end_of_list type slis_formname value 'END_OF_LIST'.
*Call Function 'REUSE_ALV_EVENTS' for top of page
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = xevents
EXCEPTIONS
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table xevents with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move slis_ev_top_of_page to ls_event-form.
append ls_event to xevents.
endif.
read table xevents with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move slis_ev_end_of_list to ls_event-form.
append ls_event to xevents.
endif.
if r_dets ne space.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BELNR'.
l_fieldcat-seltext_m = text-912.
l_fieldcat-seltext_l = text-912.
l_fieldcat-reptext_ddic = text-912.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '12'..
when 'POSNR'.
l_fieldcat-seltext_m = text-913.
l_fieldcat-seltext_l = text-913.
l_fieldcat-reptext_ddic = text-913.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '6'.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
is_layout = t_layout
i_save = 'A'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = i_output
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
else. " MAHEEDHAR
ELSEIF R_SUMM EQ 'X'. " MAHEEDHAR
sort i_output by verld herkl stawn bezei.
loop at i_output.
move-corresponding i_output to t_outsum.
collect t_outsum.
endloop.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'T_OUTSUM'
i_inclname = 'ZVRA0001FTB13'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-col_pos = '8'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
i_save = 'A'
is_layout = t_layout
i_default = 'X'
is_variant = variante
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = t_outsum
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
MAHEEDHAR-START.
*"-- if detail summary checkbox is selected
elseIF R_MSSNG = 'X'.
PERFORM PREPARE_HEADER.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
hi,
*& Report ZALV_FIELD_GRID1
REPORT ZALV_FIELD_GRID1
NO STANDARD PAGE HEADING.
TABLES MARA.
type-pools :slis.
TYPES : BEGIN OF TMARA ,
MATNR LIKE MARA-MATNR,
MEINS LIKE MARA-MEINS,
ERSDA LIKE MARA-ERSDA,
color(4) type c,
SEL type c,
LIGHT TYPE C,
END OF TMARA.
TYPES: BEGIN OF TMAKT,
MATNR LIKE MAKT-MATNR,
MAKTX LIKE MAKT-MAKTX,
MAKTG LIKE MAKT-MAKTG,
SEL TYPE C,
COLOR(4),
END OF TMAKT.
DATA: ITAB TYPE TMARA OCCURS 0 WITH HEADER LINE,
ITAB1 TYPE TMAKT OCCURS 0 WITH HEADER LINE,
wa_fieldcat type slis_fieldcat_alv,
fieldcat type slis_fieldcat_alv occurs 0,
i_layout type slis_layout_alv,
WA_LISTHEADER TYPE SLIS_LISTHEADER ,
i_LISTHEADER TYPE SLIS_LISTHEADER OCCURS 0,
V_EVENTS TYPE SLIS_T_EVENT ,
WA_EVENT TYPE SLIS_ALV_EVENT,
I_TITLE_MARA TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED',
I_TITLE_MAKT TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED',
SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE,
PRINT_CONT type slis_print_alv.
SELECTION SCREE
selection-screen begin of block screen1 with frame title TEXT-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /32(35) COMM1.
SELECTION-SCREEN ULINE /27(35).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS MATNR FOR MARA-MATNR.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /30(50) COMM2.
SELECTION-SCREEN ULINE /27(40).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS ERSDA FOR MARA-ERSDA.
SELECTION-SCREEN SKIP.
selection-screen end of block screen1.
INITIALIZATION
INITIALIZATION.
MATNR-low = '23'.
MATNR-high = '1000'.
MATNR-option = 'BT'.
MATNR-sign = 'I'.
APPEND MATNR.
ERSDA-low = '20030124'.
ERSDA-high = '20050302' .
APPEND ERSDA.
PERFORM FILLFIELD.
PERFORM FILLLAYOUT.
PERFORM build_print_params.
PERFORM FILL_SORT.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
comm1 ='SELECT MATERIAL NUMBER RANGE'.
comm2 ='SELECT MATERIAL CREATION DATE'.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM READDATA.
PERFORM POPDATA.
*& Form READDATA
text
FORM READDATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-LOW
IMPORTING
OUTPUT = MATNR-LOW.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-HIGH
IMPORTING
OUTPUT = MATNR-HIGH.
SELECT MATNR
ERSDA
MEINS
FROM MARA
INTO CORRESPONDING FIELDS OF
TABLE ITAB
WHERE MATNR IN MATNR AND ERSDA IN ERSDA.
LOOP AT ITAB.
data id_color type i VALUE 1.
data id_colors(2) type c.
IF ITAB-MATNR < '000000000000000100'.
ITAB-LIGHT = '1'.
ELSEIF ITAB-MATNR < '000000000000000150' AND ITAB-MATNR >
'000000000000000100' .
ITAB-LIGHT = '2'.
ELSE.
ITAB-LIGHT = '3'.
ENDIF.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab-color.
modify itab.
CLEAR ITAB.
endloop.
ENDFORM. " READDATA
Form FILLFIELD
FORM FILLFIELD .
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-outputlen = 20.
WA_FIELDCAT-HOTSPOT = 'X'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
*WA_FIELDCAT-EMPHASIZE = 'C210'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-COL_POS = '2'.
*WA_FIELDCAT-EMPHASIZE = 'C510'.
WA_FIELDCAT-outputlen = 10.
wa_fieldcat-seltext_m = 'UNIT'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'ERSDA'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-outputlen = 15.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
*WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'CREAT DATE'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. "FILLFIELD
Setup print parameters
form build_print_params.
PRINT_CONT-reserve_lines = '3'. "Lines reserved for footer
PRINT_CONT-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
Form POPDATA
FORM POPDATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER-COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOPPAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_MARA
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
IS_PRINT = PRINT_CONT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " POPDATA
Form TOPPAGE
FORM TOPPAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DETAIL'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "TOPPAGE
Form FILLLAYOUT
FORM FILLLAYOUT .
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-lights_fieldname = 'LIGHT'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
I_LAYOUT-no_totalline = 'X'.
ENDFORM. "FILLLAYOUT
Form FILL_SORT
FORM FILL_SORT .
SORT-DOWN = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'MATNR'.
SORT-tabname = 'MARA'.
APPEND SORT.
ENDFORM. " FILL_SORT
Form EVENT_CALL
FORM EVENT_CALL .
DATA: I_EVENT LIKE V_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_CALL
Form POPULATE_EVENT
FORM POPULATE_EVENT .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
READ TABLE V_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO WA_EVENT.
IF SY-SUBRC = 0.
move 'END_OF_PAGE' to WA_EVENT-FORM.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
endif.
ENDIF.
ENDFORM. "POPULATE_EVENT
FORM END_OF_PAGE.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
ENDFORM.
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
CASE RS_SELFIELD-FIELDNAME.
when 'MATNR'.
read table itab with key matnr = RS_SELFIELD-VALUE.
if sy-subrc = 0.
PERFORM DATA_RETRIEVAL_MAKT USING RS_SELFIELD-VALUE.
PERFORM BUILD_FIELDCATLOG_MAKT.
PERFORM FILLLAYOUT_MAKT.
PERFORM DISPLAY_ALV_MAKT.
CLEAR RS_SELFIELD.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
Form DATA_RETRIEVAL_MAKT
FORM DATA_RETRIEVAL_MAKT USING TMATNR .
SELECT MATNR
MAKTX
MAKTG
UP TO 100 ROWS
FROM MAKT
INTO TABLE ITAB1
WHERE SPRAS = 'EN' AND MATNR = TMATNR.
LOOP AT ITAB1.
data id_color type i VALUE 1.
data id_colors(2) type c.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab1-color.
modify itab1.
CLEAR ITAB1.
ENDLOOP.
ENDFORM. "DATA_RETRIEVAL_MAKT
Form FILLLAYOUT_MAKT
FORM FILLLAYOUT_MAKT .
CLEAR I_LAYOUT.
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
ENDFORM. " LAYOUT_MAKT
Form BUILD_FIELDCATLOG_MAKT
FORM BUILD_FIELDCATLOG_MAKT .
REFRESH FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
WA_FIELDCAT-EMPHASIZE = 'C510'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTG'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-EMPHASIZE = 'C210'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. " BUILD_FIELDCATLOG_MAKT
Form DISPLAY_ALV_MAKT
FORM TOP-OF-PAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DESCRIPTION FOR SELECTED NUMBER'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB1 lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM. "TOP-OF-PAGE
*& Form DISPLAY_ALV_MAKT
text
FORM DISPLAY_ALV_MAKT .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = I_TITLE_MAKT
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_MAKT
Regards
Ashok kumar -
Hide delete option is not working in ALV List Display- urgent
Hi All,
In my program i am displaying the output by using alv list display. after displaying the data i am displaying my own pf status here. in this i have few pushbuttons like
selest all, deselect all, hide . first two options are working fine. when i click hide button selected records are going to be hide.but this is not happening in my program. any body cam send me the code plz.
i am sending my code below. if possible please modify and resend the code asap.
my code:
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
*data : box,
input(1) type c,
data : checkbox type c,
flag type c,
end of it_secobjects.
data : wa_ita like line of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
*DATA : it_filt type slis_t_filter_alv with header line.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
when 'HIDE_DEL'.
rs_selfield-exit = 'X'.
it_filt-fieldname = 'CHECKBOX'.
it_filt-tabname = '1'.
it_filt-valuf = 'X'.
it_filt-intlen = '1'.
it_filt-inttype = 'C'.
it_filt-datatype = 'CHAR'.
it_filt-valuf_int = 'X'.
it_filt-sign0 = 'E'.
it_filt-optio = 'EQ'.
if it_filt[] is initial.
append it_filt.
else.
modify it_filt index 1.
endif.
perform display using i_object.
PERForm ALV_LIST_DISPLAY.
WHEN 'SHOW_DEL'.
rs_selfield-exit = 'X'.
free it_filt.
PERForm ALV_LIST_DISPLAY.
when 'SAVE1'.
select * from zuser_secobjects where
appln = zuser_secobjects-appln
and appln_partner = zuser_secobjects-appln_partner
and partner_type = zuser_secobjects-partner_type
and start_date = zuser_secobjects-start_date
and end_date = zuser_secobjects-end_date.
endselect.
if sy-subrc eq 0.
message e000(ZV) with 'Duplicate Entry'.
endif.
endcase.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'CHECKBOX'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.tHi,
What do you mean by Hiding the records.
Deleting completely from the screen.
You can just delete the records from the internal table and pass to field catalog before displaying again.
or serach in the slis structrue for hiding the contents of the output.
reward if useful
regards,
Anji -
How to edit particular field in alv list display-urgent
HI ALL,
my requirement is i am displaying output using alv list display. now my rewuirement :
i am displaying out in edit mode only. when user clicks one particular field
for example record is like
runrate a01 maheed -> if user clicks on a01 this field should be editable. i have a following code
w_field-edit = w_edit.
w_field-input = 'X'. -> using this code i can able to display entire colomn in edit mode. this not suits my requirement.anybody can send me the sample code please.
thanks,
maheedhar.tCan you please send me the sample code plz.
i am sending my code below.
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
data : checkbox type c value 'X',
action type c,
end of it_secobjects.
data : begin of it_secobjects1 occurs 0.
include structure ZUSER_SECOBJECTS.
data : checkbox type c VALUE 'X',
end of it_secobjects1.
data : wa_ita like line of it_secobjects.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
maheed-start.
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
delete it_SECOBJECTS.
endloop.
*RS_SELFIELD-REFRESH = 'X'.
maheed-end.
maheed-start. apr 13
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
delete it_SECOBJECTS.
endloop.
RS_SELFIELD-REFRESH = 'X'.
when 'SAVE'.
DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
commit work.
refresh :IT_SECOBJECTS1.
maheed-end. apr 13
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
ENDCASE.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog." USING w_edit TYPE any.
data : w_edit type c.
clear w_edit.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-EDIT = 'X'. "maheed
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_PARTNER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m03.
w_field-edit = w_edit.
w_field-input = 'X'.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'INACTIVE'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 3.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
DATA : LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'ACTION'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.t -
GOA replication problem- data missing during RFC-Urgent
Hi,
I have an issue with updating GOA from SRM to ECC. Standard GOA do not have any fields to update TAX code and ERS indicator to the back end.
This two fields are added to the structure BBPS_CTR_ITEM through customization.
The GOA is transferred to the backend through the FM META_CTR_TRANSFER which in turn calls the FM B46B_CTR_TRANSFER.
Inside the FM B46B_CTR_TRANSFER the RFC call is made to FM BBPV_CONTRACT_TRANSFER which actually transfers the GOA to the backend. The GOA line item details are passed to this FM through lt_be_items[].
The issue is, i can able to see the TAX code and ERS indicator in the itab lt_be_items in SRM side, but when it goes to the ECC through RFC these two fields become blank,
I checked the structure of the same itab in ECC side the field names and the domains are same.
Thanks in advance,
Aravind.The issue was due to improper structure mapping between two systems. Now its solved.
Regards,
Aravind. -
ALV Report_ its urgent pls help me ( every input gets the reward points)
Program with ALV_Grid
1. Selection Screen
Customer Number: KUNNR
Billing Date: FKDAT
Now Using the above Selection screen inputs, I want to generate the following fields in the output.
2. Output Screen
Invoice No: VBELN
Invoice Date: FKDAT
Customer Number: KUNNR
Customer Name: NAME1
Material Description: MAKTX
Payment Terms: ZTERM
Net Value: NETWR
Ship-to City: ORT01
Sold-to party: KUNAG
Ship-to party: KUNNR
Tables Used:
Delivery: LIKP, LIPS
Invoice:VBRK, VBRP
Customer: KNA1
Material: MARA
Material Description: MAKT
Now the Problem what I got is....How to link between these tables...ie., what common fields can be used between these tables so that I can use FOR ALL ENTRIES and retrieve the above output fields.
3. Create Dictionary Structure for Output Data
4. Create Dynpro (Screen 9000)
5. Create ALV Grid Object and Call Method "set_table_for_first_display" of alv obj in PBO Module of Screen
Can anyone please help me out in giving a REPORT program or a pseudo code for the above data.Hi
The link with select-options
VBRK-KUNAG (or KUNRG) -> KUNNR (Select option)
VBRK-FKDAT -> FKDAT (Select option)
Link between header and item data
VBRP-VBELN = VBRK-VBELN.
Link beetween invoice and delivery
VBRP-VGBEL = LIPS-VBELN
VBRP-VGPOS = LIPS-POSNR
Link beetween header and item delivery
LIPS-VBELN = LIKP-VBELN
Link beetween document and material
VBRP-MATNR (or LIPS-MATNR) = MARA-MATNR
Link with customer master data
VBRK-KUNAG (or KUNRG) = KNA1-KUNNR
Max -
Download ALV to EXcel- Urgent pls help me
Please help me in this...
I have an ALV report around 120 column. The report is displayed perfectly on screen. But when I use the Export option to download as an excel file, some data is missing in SAP No field
For example
My report output is like this
sap No Name Jobdes. Dept
00021 AAA clerk1 FI
00022 BBB clerk1 FI
00023 CCC clerk1 FI
00024 DDD clerk1 FI
00025 EEE clerk1 FI
00026 FFF clerk1 FI
Excel output is
sap No Name Jobdes. Dept
00021 AAA clerk1 FI
Blank BBB clerk1 FI
Blank CCC clerk1 FI
Blank DDD clerk1 FI
00025 EEE clerk1 FI
Blank FFF clerk1 FI
Pls help meHi Kumar,
Pls try the below Function Modules to download the data to excel.
ALSM_EXCEL_TO_INTERNAL_TABLE
KCD_EXCEL_OLE_TO_INT_CONVERT Uploads data directly from Excel sheet
RH_START_EXCEL_WITH_DATA Starts Excel with contents of an internal table
or the below links also might help you.
For uploading Excel to Internal Table??????
Data from Excel sheet to my internal table
Check the following link:
http://www.sap-img.com/abap/upload-direct-excel.htm
or even the below code might be helpful.
Multiple excel sheets generation in a workbook
CREATE OBJECT EXCEL 'EXCEL.SHEET'.
GET PROPERTY OF EXCEL 'Application' = APPLICATION.
SET PROPERTY OF APPLICATION 'Visible' = 1.
CALL METHOD OF APPLICATION 'Workbooks' = BOOKS.
CALL METHOD OF BOOKS 'Add' = BOOK.
CALL METHOD OF BOOK 'WORKSHEETS' = SHEET.
CALL METHOD OF SHEET 'ADD'.
Fill all the sheets with relavant data
PERFORM SHEET1 TABLES ITAB1.
PERFORM SHEET2 TABLES ITAB2.
PERFORM SHEET3 TABLES ITAB3.
PERFORM SHEET4 TABLES ITAB4.
Quit the excel after use
CALL METHOD OF EXCEL 'QUIT'.
FREE OBJECT: COLUMN,SHEET,BOOK,BOOKS,APPLICATION,EXCEL. "NO FLUSH.
CLEAR V_SHEET.
FORM FILL_CELL USING ROW COL VAL.
CALL METHOD OF SHEET 'cells' = CELL NO FLUSH
EXPORTING #1 = ROW #2 = COL.
SET PROPERTY OF CELL 'value' = VAL.
FREE OBJECT CELL NO FLUSH.
ENDFORM. " FILL_CELL
FORM SHEET1 TABLES ITAB1 STRUCTURE ITAB1.
V_SHEET = Sheet Name.
V_NO = V_NO + 1.
CALL METHOD OF BOOK 'worksheets' = SHEET NO FLUSH EXPORTING #1 = V_NO.
SET PROPERTY OF SHEET 'Name' = V_SHEET NO FLUSH.
PERFORM FILL_SHEET1 TABLES ITAB1 USING V_NO V_SHEET.
CALL METHOD OF SHEET 'Columns' = COLUMN.
FREE OBJECT SHEET.
CALL METHOD OF COLUMN 'Autofit'.
FREE OBJECT COLUMN.
ENDFORM.
Repeat above procedure for all sheets you want to add
FORM FILL_SHEET1
TABLES ITAB1 STRUCTURE ITAB1
USING V_NO V_SHEET.
ROW = 1.
PERFORM FILL_CELL USING ROW 1 'Column1 Name'.
PERFORM FILL_CELL USING ROW 2 'Column2 Name'.
PERFORM FILL_CELL USING ROW 3 'Column3 Name'.
ROW = ROW + 1.
LOOP AT ITAB1.
PERFORM FILL_CELL USING ROW 1 ITAB1-Column1.
PERFORM FILL_CELL USING ROW 2 ITAB1-Column2.
PERFORM FILL_CELL USING ROW 3 ITAB1-Column3.
ROW = ROW + 1.
ENDLOOP.
ENDFORM.
Repeat above procedure for all sheets you want to add
Try this also
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
Upload Excel file
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file
TABLES
i_tab_converted_data = i_XCEL[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Pls reward if useful.
THanks,
Sirisha -
Error in clicking save to local file button in alv grid? urgent
>>>>> if lr_tabledescr->applies_to_data( <coltab_any> ) eq 'X'.
exactly i am getting error here
how to rectify this error
Error in clicking save to local file button and mail receipt button in alv grid?In your REUSE_ALV_GRID_DISPLAY
EXPORTING
I_SAVE = 'U'
put this field....and then check it will definitely work... -
Problem in RFC - Urgent.
Hi,
I am using a RSPC_CHAIN_REMOTE_EXECUTE FM to trigger a PC in BI. it is triggering the PC, but after it is triggering, the screen for selecting the Job Priority comes up and the transacation is not ending.
The point to note is the PC is dummy PC with a Start Variant and a Message after it with n o data transaction involved.
Please let me know if i am missing something here. Please repply asap as it is urgent.
Thanks in Advance!!
P.S: Points will be rewarded.Aren't you clearing your variables on occurence of new customer?? if not, do that..
Regards,
Nagaraju Chidurupalli -
Hi,
Can anyone help me with ALV that how to display ALV Column Heading in Multiple Line.
Means Multiple line Coulmn heading of ALV.
Please fell free to contact me at
[email protected]
Regards,
Muhammad Usman Malik
SAP ABAP Consultant
Siemens Pakistan
+92-333-2700972Welcome to SDN.
Copy Paste below code and execute the same. The output contains mutiple lines in header but I dont know how to do it in ALV. May be of some help to you.
REPORT ztestvib MESSAGE-ID zz LINE-SIZE 50.
TYPE-POOLS: slis.
DATA: x_fieldcat TYPE slis_fieldcat_alv,
it_fieldcat TYPE slis_t_fieldcat_alv,
l_layout TYPE slis_layout_alv,
x_events TYPE slis_alv_event,
it_events TYPE slis_t_event.
DATA: BEGIN OF itab OCCURS 0,
vbeln LIKE vbak-vbeln,
posnr LIKE vbap-posnr,
male TYPE i,
female TYPE i,
END OF itab.
SELECT vbeln
posnr
FROM vbap
UP TO 20 ROWS
INTO TABLE itab.
x_fieldcat-fieldname = 'VBELN'.
x_fieldcat-seltext_l = 'VBELN'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 1.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'POSNR'.
x_fieldcat-seltext_l = 'POSNR'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 2.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'MALE'.
x_fieldcat-seltext_l = 'MALE'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 3.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'FEMALE'.
x_fieldcat-seltext_l = 'FEMALE'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 3.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_events-name = slis_ev_top_of_page.
x_events-form = 'TOP_OF_PAGE'.
APPEND x_events TO it_events.
CLEAR x_events .
l_layout-no_colhead = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = l_layout
it_fieldcat = it_fieldcat
it_events = it_events
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form top_of_page
text
FORM top_of_page.
*-To display the headers for main list
FORMAT COLOR COL_HEADING.
WRITE: / sy-uline(103).
WRITE: / sy-vline,
(8) ' ' ,
sy-vline,
(8) ' ' ,
sy-vline,
(19) '***'(015) CENTERED,
sy-vline.
WRITE: / sy-vline,
(8) 'VBELN'(013) ,
sy-vline,
(8) 'POSNR'(014) ,
sy-vline,
(8) 'MALE'(016) ,
sy-vline,
(8) 'FMALE'(017) ,
sy-vline.
FORMAT COLOR OFF.
ENDFORM. "top_of_page -
ALV guide! Urgent!!!
Does anybody has material/docs/link on ALV? How to create a report using ALV and about the ALV function modules?
Please send it at: [email protected]Hi,
http://www.sap-img.com/abap.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
http://www.henrikfrank.dk/abapuk.html -
How place an company logo in alv repots in webdynpro abap
in webdynpro how to place a image in alv reports at particular corner .
Hi,
Check out this link -
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/86/641b88c9034eebacb26ba7fbb17981/frameset.htm
Get the ALV header using the model(cl_salv_wd_config_table) object.
using this header object use the method to set the image SET_IMAGE_SOURCE.
Regards,
Lekha.
Maybe you are looking for
-
Problem In Calling API fa_addition_pub.do_addition
Hello friends, I am workin on the addition Of asset program In which i called API fa_addition_pub.do_addition but when i am executing it it gives me error Error(157,1): PLS-00306: wrong number or types of arguments in call to 'DO_ADDITION' Error(196,
-
HP Laserjet P4014 Stopped – 'Filter' failed
I've seen discussion of this for other printers and versions of OS X. Has anyone seen this on 10.9.5 and, better still, solved it? If I try to print to a networked HP Laserjet P4014, the print queue gives up with the message Stopped – 'Filter' failed
-
Batch action takes over my desktop - can I stop it?
I've created an action that I use in batch in PS CS5 - which uses basic PS stuff like curves, etc and then uses some steps from Color Effects Pro 4 from Nik Software. I usually start the process from the Autmate window and the minimize PS while I op
-
dear All, Is there any thumb rule to decide whether a characteristic should be defined as an attribute/navigational attribute. the reason is from a realignment point of view, navigational attributes can be easily realigned by just updating the master
-
Vsphere health check report 5.1 vs ESX 5.5u1
Hi, The script has been working without issues for quite some time. I recently upgraded my hosts to ESX 5.5u1 and now the scheduled task is returning an error --> Can't load class 'HostSriovInfo' at C:/Program Files (x86)/VMware/VMware vSphereCLI/Per