ALV set row and column position

Hi Experts,
I have editable ALV, after edit I refresh ALV, but problem is, that position is set to position 1.1. I need to keep cursor at edited position.
I use ALV through function module REUSE_ALV_GRID_DISPLAY.
Thansk&regards,
Jirka

In order to refresh the ALV and keep the scroll position, you have to read the scroll posiition before refresh and set the scroll position after the refresh..
Below code will help,.. Whenever you want to refresh the alv use these in your coding...
FORM refresh_alv_display.
DATA: li_rows    TYPE lvc_s_roid,
         li_col     TYPE lvc_s_col,
         lws_row_id TYPE lvc_s_roid,
         lws_col_id TYPE lvc_s_col,
         ls_col     TYPE lvc_s_col,
         ls_num     TYPE lvc_s_roid.
   CALL METHOD c_grid->get_current_cell
     IMPORTING
       es_col_id = li_col
       es_row_no = li_rows.
   CALL METHOD c_grid->get_scroll_info_via_id
     IMPORTING
       es_col_info = ls_col
       es_row_no   = ls_num.
   CALL METHOD c_grid->refresh_table_display.
   CALL METHOD c_grid->set_scroll_info_via_id
     EXPORTING
       is_col_info = ls_col
       is_row_no   = ls_num.
   lws_row_id-row_id    = li_rows-row_id.
   lws_col_id-fieldname = li_col-fieldname.
   CALL METHOD c_grid->set_current_cell_via_id
     EXPORTING
       is_column_id = lws_col_id
       is_row_no    = lws_row_id.
ENDFORM.

Similar Messages

Setting row and column constraints in FXML

I've set the column and row constraints in my FXML controller like this:
RowConstraints row1 = new RowConstraints();
row1.setVgrow(Priority.ALWAYS);
RowConstraints row2 = new RowConstraints();
row2.setMaxHeight(150);
row2.setVgrow(Priority.NEVER);
pane.getRowConstraints().addAll(row1, row2);
ColumnConstraints column1 = new ColumnConstraints();
column1.setMaxWidth(250);
column1.setHgrow(Priority.NEVER);
ColumnConstraints column2 = new ColumnConstraints();
column2.setHgrow(Priority.ALWAYS);
pane.getColumnConstraints().addAll(column1, column2);and it works fine but what I can't figure out is how I'll do that using only FXML?

Hi,
Try the following:
    <?import javafx.scene.layout.*?>
    <GridPane>
        <rowConstraints>
            <RowConstraints vgrow="ALWAYS" />
            <RowConstraints maxHeight="150" vgrow="NEVER" />
        </rowConstraints>
        <columnConstraints>
            <ColumnConstraints maxWidth="250" hgrow="NEVER"/>
            <ColumnConstraints hgrow="ALWAYS"/>
        </columnConstraints>
        <children>
        </children>
    </GridPane>Basically 'rowConstraints' and 'columnConstraints' are attributes on GridPane of type Collection.
Hope that helps,
zonski
Did you find this answer useful? If so, please mark as 'correct' or 'helpful'.

How to set the Selected row and Column in JTable

Hi,
i have a problem like the JTable having one Method getSelectedRow() and getSelectedColumn to know the Selected row and Column but if i want to explicitly set the Selected Row and Column,then there is no such type of Methods.If anybody has any solution then i will be thankful to him/her.
Praveen K Saxena

Is that what you're looking for? :myTable.getSelectionModel().setSelectionInterval(row, row);
myTable.getColumnModel().getSelectionModel().setSelectionInterval(column, column);

Dynamic Positioning of Objects in a Grid (rows and columns) AS3 Tutorial

The topic of a dynamic positioning of objects in a right grid (rows and columns) comes up often so I decided to post an AS3 solution here:
http://flashascript.wordpress.com/2010/12/25/arranging-objects-into-2d-dynamic-grid-with-a ctionscript-3/

Hard to tell from your description but this might help:
http://dtptools.com/product.asp?id=atid
Bob

Dynamic Positioning of Objects in a Grid (rows and columns) with AS3 Tutorial

The topic of a dynamic positioning of objects in a right grid (rows and columns) comes up often so I decided to post an AS3 solution here:
http://flashascript.wordpress.com/2010/12/25/arranging-objects-into-2d-dynamic-grid-with-a ctionscript-3/

Hard to tell from your description but this might help:
http://dtptools.com/product.asp?id=atid
Bob

Set maximum matrix row and column size

I hope someone can help me with this. Is there any way to set the row and column size of a matrix control? I have not been able to find a solution. The only way I've been able to set the size is by resetting matrix to its previous state if the user inputs a value outside of the bounds I would like to set. This is done in the 'value changed' event case.
The matrix is large and therefore I cannot increase the size of the control to be the maximum size and then hide the row and column index controls. These have to be displayed.
Any suggestions or help would be greatly appreciated. Thanks in advance.

Here's a quick and dirty way.
Simply hide the index controls and replace them with some fake numeric controls and set the data range accoding to your requirements.
In the attached example (LV8.0), the fake index controls are limited to 0..2, the array size is 5x5 and the displayed array portion is 3x3. Seems to work fine.
(Of course you could add a bit more code to set the limits automatically based on the various sizes.)
You could also make it more fancy and turn the entire thing into an Xcontrol.
Message Edited by altenbach on 06-06-2007 05:32 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LimitArrayControl.vi ‏18 KB

Need help setting up rows and columns for a shop page in DW

I sell my books and design tees on my site. I'm trying to set up a new page for a new site.
For some reason I can't get my products in a row and column fashion.
I have a attachment file so you can see what I actually mean. thanks to all that will give advice.

Use a table for your product catalog.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How to make a particular row and column field editable in ALV

Hi Experts,
I have a requirement to make a particular row and column field editable in ALV output. Like i need to make 2nd row - 4th column editable of ALV output.
Kindly help me out to solve this.
Any help would be appreciated.
Thanks,
Ashutosh

Hi Ashutosh,
please check below, explained by some experts.
In the below link editing two columns MOD_RANK and TECH_RANK.
These two columns will be in edit mode once after selecting the required record
Editing single cell in a row of ALV table
And also look for more info
http://scn.sap.com/thread/884976

Setting number of rows and columns

How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.

I wish to add a few words to Jerrold responce.
gjf12 wrote:
How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.
The process that you describe is inefficient.
The efficient one is :
create a table
enter the formulas in a single row
delete the rows below.
Now, each newly inserted row will contain the formulas.
From my point of view, it's when this is done that it will be interesting to apply a script adding rows.
Here is a script inserting rows.
--[SCRIPT insertRows]
Enregistrer le script en tant que Script : insertRows.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule au-dessous de laquelle vous voulez insérer des lignes.
menu Scripts > Numbers > insertRows
Le script vous demande le nombre de lignes désiré puit insère celles-ci.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: insertRows.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell below which you want to insert rows.
menu Scripts > Numbers > insertRows
The script ask you the number of rows to insert then it does the required insertion.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/01/13
--=====
on run
set defaultValue to 100
if my parleAnglais() then
set myInteger to my askAnumber("Insert how many rows ?", defaultValue, "i")
else
set myInteger to my askAnumber("Combien de lignes voulez-vous insérer ?", defaultValue, "i")
end if
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
repeat myInteger times
add row below row rowNum2
end repeat
end tell
end run
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
Asks for an entry and checks that it is an floating number
set myInteger to my askAnumber(Prompt, DefaultValue, "i")
set myFloating to my askAnumber(Prompt, DefaultValue, "f")
on askAnumber(lPrompt, lDefault, ForI)
local lPrompt, lDefault, n
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be a floating number." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre décimal." & return & "Veuillez recommencer."
end if
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be an integer." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre entier." & return & "Veuillez recommencer."
end if
end try -- 1st attempt
end if -- ForI…
end tell -- application
Here if the first entry was not of the wanted class
second attempt *)
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
end try -- 1st attempt
end if -- ForI…
end tell -- application
if my parleAnglais() then
error "The value you entered was not numerical !" & return & "Goodbye !"
else
error "La valeur saisie n’est pas numérique !" & return & "Au revoir !"
end if
end askAnumber
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mercredi 13 janvier 2010 12:43:34

Editing rows and columns in alv reports in webdynpro abap

how edit row and columns in webdynpro abap ?
can i add colors to salv repotrs for below and above range of values how ?
if possible send source code for it.............

hi
check out this link for editing the columns of ALV
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b
check out for this thread as well for coloring ALV
Coloring of selected table cells: Ideas wanted
regards,
amit

Multiple Rows and Columns selection on ALV

Hi all,
What is the best solution to allow the multiple selection or combination of selection (rows and columns) on an ALV ?
I would like to be able to select some rows and some columns and to get the result cells in order to update them.
Thanks in advance for your help.
David

Thanks Srinivas and Seela,
I forgot to precise that my ALV is dynamic, I used the method 'add_new_child_node'.
I tried the different possibilties with method attributes but I don't find the good attributes combination to allow columns selection.
I add also that I have to be able to select several no adjacent columns.
What do you think about this workaround :
Is it possible to add a line on my ALV with checkbox between the header line (with column title) and data line.
I will search using the method add_cell_variant but I don't know if it's possible with dynamic ALV.
Thanks.
David

Setting cursor to appropriate row and column in JTextArea

Hi
this is kranthi from Hyd
iam unable to point out the cursor to the appropriate row and column in the JTextArea
are there any methods to do so
plz help me

Yup, look at setCaretPosition(int pos)

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How do I read text from specific rows and columns in a tree structure?

How do I read text from specific rows and columns in a tree structure? In a table you can specify the cell to read from but I have not been able to figure out how to do this with a tree structure.

You need to set two properties to activate the correct cell and then you can read it's string property.
The positioning properties are the "ActiveItemTag" and
"ActiveColNum" properties. With them you select the tree item by it's tag and the active column. The string can then be read from the "Cell String" property.
MTO

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

ALV set row and column position

Similar Messages

Maybe you are looking for