ALV standard function Spread sheet not working
Hi
I am using ALV class CL_GUI_ALV_GRID (with check box). When i want to trnsfer output using Spread sheet then its giving the error message "Cannot open spreadheet". Please suggest.
Thanks and Regards
Aditya
Hi,
Check if MS excel is installed on your machine ?
Regards
Similar Messages
-
Function keys are not working correctly
I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly -
Function module is not working properly in background
Hi all,
i have used one Function module 'PRICING' in user exit SAPMV45A to calculate pricing for sales order.
i am using BAPI_SALESORDER_CHANGE to change the sales order pricing.
when i run the program in foreground, all condition records for pricing is updated correctly. but it is not updating
correctly when i run the program in background.
Please tell me wheather 'PRICING' or 'BAPI_SALESORDER_CHANGE' function module is not working properly in background ?
or any other reason?
Thanks
babuHi Pabitra,
Can you provide some more information as to the type of error you are getting? Or can you check the log entries and give some more information so that it would be possible to provide a solution.
And, try to put questions in proper Forum for quick and prompt reply.
Hope this helps.
Thanks,
Samantak. -
Function keys do not work on new wireless keyboard
Hello....my good friend just bought a new iMac G5 2.1 spotlight model computer and has had troubles with his new wireless keyboard in that all 16 function keys do not work at all. Got any ideas or is it just a defective keyboard? He bought this at my recommendation so i am trying to make it all work smoothly for him. Would appreciate a quick response as he has now had this mac for 2 weeks and we cannot figure out the problem. Thanks in advance for any and all help
I have no issues using the Apple BT keyboard. All function keys that apply to the iPad work correctly; display brightness, iPod app control, etc.
Use the most recent version of iOS and also iTunes on your computer. Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
If that does not work, then restore the iPad to it factory settings. -
The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
My Macbook Pro (bought in 2013) function keys are not working
My Macbook Pro (bought in 2013) function keys are not working. The function keys ie the volume and brightness are not working at all both with one single tap and with the function button. I have checked the settings for the keyboard but nothing seems to stand out that is making the keys not work?
Please can you help?
Thanks
KatSome might suggest resetting the SMC, but I don't really think that will solve the problem. You can try, though.
I would suggest, since you're still under warranty, taking your machine to your local Apple Store/AASP and letting them fix the problem. It could be any sort of hardware problem. Only the Apple techs have the tools to properly diagnose and repair the machine.
Clinton -
Hi All,
When i execute the function module SAPWL_GET_SUMMARY_STATISTIC in CRM ABAP 6.0 passing the values below,
PERIODTYPE
HOSTID
STARTDATE
it's not showing any values in the summary.
it's showing the exporting parameters as,
RFC_ERROR_TYPE L
SUMMARY_AVAILABLE N
HITLISTS_N_PROFILES_AVAILABLE A
if this function module will not work means kindly provide me the solution for calculating
Average Response Time as in tcode st03 - Instance - total - Workload Overview.
Average CPU Time and some more fileds.
Regards,
SureshHi
I used the FM mentioned and found the details as below:
VKORG
TABNAME TVKO
FIELDNAME VKORG
LANGU EN
POSITION 0001
OFFSET 000006
DOMNAME VKORG
ROLLNAME VKORG
CHECKTABLE
VTEXT
TABNAME TVKOT
FIELDNAME VTEXT
LANGU EN
POSITION 0002
OFFSET 000014
DOMNAME TEXT20
ROLLNAME VTXTK
CHECKTABLE
LENG 000020
Shiva -
Check Function Module is not working
Hi All Expert,
I'm new in workflow and develop custom workflow for Transaction FB65 ( Vendor Credit Memo) and using business object FIPP , event CREATED.
Actually requirement is that when user click on park button in FB65 then should be trigger workflow only for particular vendor code .
Now my workflow is working fine for all vendor code.
For particular vendor code, I have created an new entries in SWE2 and assigning a check function module to that
Refer Link : http://www.****************/Tutorials/Workflow/checkfunctionmodule/demo.htm
and also same entries create in SWETYPV But Check Function Module is not working before workflow trigger.
Appreciate your help and support.
Regards
SaurabhHi
: Check FM : ZWF_DR_CR_MEMO
SourceCode :
FUNCTION ZWF_DR_CR_MEMO.
*"*"Local Interface:
*" IMPORTING
*" VALUE(OBJTYPE) LIKE SWETYPECOU-OBJTYPE
*" VALUE(OBJKEY) LIKE SWEINSTCOU-OBJKEY
*" VALUE(EVENT) LIKE SWETYPECOU-EVENT
*" VALUE(RECTYPE) LIKE SWETYPECOU-RECTYPE
*" EXPORTING
*" REFERENCE(RESULT) TYPE C
*" TABLES
*" EVENT_CONTAINER STRUCTURE SWCONT
*" EXCEPTIONS
*" NOT_TRIGGERED
BREAK-POINT.
TABLES : VBSEGK.
DATA : LV_VEND TYPE VBSEG-LIFNR.
CLEAR : LV_VEND.
SELECT SINGLE LIFNR FROM VBSEGK INTO LV_VEND WHERE BELNR EQ OBJKEY.
if sy-subrc eq 0
IF LV_VEND = '0000120510'.
RAISE NOT_TRIGGERED.
ENDIF
endif.
ENDFUNCTION. -
Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel
Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.
See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
of Excel 2007 graph-Adobe ProX?" and similar discussions. Are you
scaling it to less than 100%?
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers -
quickly, easily, and for free!
>>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
visible after converting excel created by jblairdynis (
http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
Exporting PDFs - View the full discussion (
http://forums.adobe.com/message/4346704#4346704 )
Hello, I am having an issue with Autocad 2010 drawings not showing
up in a pdf document. Normally, I cut and paste part of an Autocad 2010
drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
Distiller, I convert the Excel spread sheet into a pdf document for
propriatary purposes. However, recently the drawing pasted into Excel
will not fully appear on the pdf, the drawing is cut off past a certain
point. The drawing will print normally in Excel, but in pdf will not
print normally. If the drawing is shrunk below the "cut off" point, it
appears normally. If the drawing is expanded above the "cut off" point,
any additional image is lost. Any suggestions on how to fix the problem
would be appreciated.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4346704#4346704
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4346704#4346704. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email (
mailto:discussions-community-acrobat-creating__editing_%[email protected]
) or at Adobe Forums (
http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message. -
ALV GRID Tool bar options not working
Hello Experts,
I copied the standard tool bar into my program with the name 'ZSALV_STANDARD' and displaying the output in the grid format in a container with the method set_table_for_first_display
When I execute the program the standard buttong in the tool bar are not working... Can anyone guide where am I going wrong...
Here is my code
DATA : gr_event_handler TYPE REF TO lcl_event_handler .
DATA: threed TYPE i VALUE 1.
SET PF-STATUS 'ZSALV_STANDARD'.
* Creating an instance for the event handler
CREATE OBJECT gr_event_handler .
TRY.
CREATE DATA i_table TYPE TABLE OF (viewname).
ASSIGN i_table->* TO <i_itab>.
CREATE DATA wa_all LIKE LINE OF <i_itab>.
ASSIGN wa_all->* TO <wa_tab>.
* Selecting data dynamically
SELECT * FROM (viewname) INTO TABLE <i_itab>.
* Building the fieldcatelog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = viewname
CHANGING
ct_fieldcat = li_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Making fields editable except key fields
IF sy-ucomm = 'UPD' OR sy-ucomm = 'CHANGE'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
IF lwa_fieldcat-key = space.
lwa_fieldcat-edit = 'X'.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDIF.
ENDLOOP.
ENDIF.
* Making fields editable
IF sy-ucomm = 'NEW'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
lwa_fieldcat-edit = 'X'.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDLOOP.
lh_flag = 'X'.
CLEAR : <i_itab>.
DO 100 TIMES.
APPEND <wa_tab> TO <i_itab>.
ENDDO.
ENDIF.
* Exclude buttons
PERFORM exclude_tb_functions CHANGING i_exclude.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING
container_name = g_container.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container.
ENDIF.
* Making all fields non-editable if display mode
IF sy-ucomm = 'SHOW'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
lwa_fieldcat-edit = ' '.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDLOOP.
ENDIF.
IF sy-ucomm = 'SAVE'.
LOOP AT li_fieldcat INTO lwa_fieldcat.
IF lwa_fieldcat-key NE space.
lwa_fieldcat-edit = space.
MODIFY li_fieldcat FROM lwa_fieldcat.
ENDIF.
ENDLOOP.
ENDIF.
* Displaying ALV Grid
i_layout-NO_TOOLBAR = 'X'.
i_layout-edit = 'X'.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = viewname
it_toolbar_excluding = i_exclude
i_default = 'X'
is_layout = i_layout
CHANGING
it_outtab = <i_itab>
it_fieldcatalog = li_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3.
IF sy-subrc NE 0.
EXIT.
ENDIF.
* Getting the changed data
SET HANDLER gr_event_handler->handle_data_changed FOR grid1 .
CATCH cx_sy_create_data_error.
ENDTRY.
Thanks alot in advance.
SriHello ,
try
call method g_grid%->set_table_for_first_display
exporting
i_save = p_save_layout%
i_default = 'X'
is_layout = ps_layout%
is_variant = ps_variant%
it_toolbar_excluding = pt_exclude%
changing
it_outtab = pt_alv_tab1[]
it_fieldcatalog = pt_fieldcat%[].
call method g_grid%->set_toolbar_interactive.
regards
Prabhu -
Back Function key is not working
I have created report programing. and also add buttons to application tool bar using transaction 'SE41'.
But in this case whenever I run program and click on Back.it is asking me to populate fields.
Even after populating fields and clicking Back wont take me to BACK screen...
It is asking for 'Put cusron on selection'..
Back is standard tool bar even why it is not working.
I set status as below.
**Variant
INITIALIZATION.
**Initialize Report Global Variables
PERFORM f_initialize_report.
SET PF-STATUS 'STANDARD'
Finally i write code for back function as follws.bUt I don't want this transaction.I want back screen.
I am submitting this report via ALV grid display from other program(By double clicking row).When i press Back it should show alv display.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN '&F03'.
LEAVE to transaction 'ZCM_SEARCH_RULE'.
ENDCASE.hi,
in 'standard' status for 'back' icon have add &f03 as function key ,check it first.
and then in the initialization write the code 'set pf-status 'standard'.
and under start-of-selection.
write set pf status space.(it will enables all the standard buttons back,cancle,exit...).
now if u click on back it should wor.
try it once.
if u have created a button for back and assigned say 'back' code for that, then go like this.
start of selection.
case sy-ucomm.
if sy-ucomm = 'BACK'.
LEAVE LIST PROCESSING.
(OR U CAN WRITE LEAVE PROGRAM OR LEAVE TO SCREEN 0).
ENDIF. -
Telephone numbers in a excel spread sheet not recognized by Adobe Acrobat DC
Before my upgrade to Adobe Acrobat DC on my iPhone, telephone numbers in a excel spread sheet was recognized by Acrobat Reader as such i.e. You would touch and hold the number, then a 'pop up' would appear that gave the option to 'CALL' or 'SEND A MESSAGE'. This function no longer works in Adobe Acrobat DC, why not?
Hi,
Acrobat DC for iOS uses the Apple iOS SDK to display the preview of non-PDF documents (e.g. Word, Excel, PowerPoint).
It looks like an Apple bug for failing to auto-detect phone numbers only in Excel spreadsheets.
I opened my Excel (.xlsx and .xls), Word (.docx), PowerPoint (.pptx) documents with phone numbers in Acrobat DC for iOS. The phone numbers in the Word and PowerPoint documents were correctly recognized as such. In the preview, the plain text turns into blue underlined text. When you press and hold over the phone number, you will get the options that you have mentioned.
On the other hand, the phone numbers in the Excel spreadsheet were not recognized in the preview. In Excel, I used Format Cells > Number > Special > Phone Number with United States (English) as language. But it did not fix the problem.
As it turns out, the Apple Mail preview (on iOS 8) has the same problem. You can also email your Excel spreadsheet to yourself and open it in Apple Mail on your iPhone to confirm that it is an Apple bug.
You may want to post a question in the Apple Support
iPhone - Mail, Contacts, Calendars - Apple Support
or use Word documents instead for auto-detection of phone numbers.
Sorry for the inconvenience. -
ALV Output to Spread sheet.. all integer,date fields are moved to last .
My requirement is that, Downloading the ALV displayed data into Excel.
So, I gone Menu>List>Export-->Spreadsheet
But, I observed that, the Currency, Date, Unit columns r coming in the last of spread sheet and with out any color(where as other columns does hv some color!)
I am expalining with the example .
when we take the table SFLIGHT.
Go To SE16 and give table SFLIGHT
and then go for it contents..
then the sequence of cloumns in ALV o/p is as follows..
Carrid,Connid,Fldate,Price,Currency ,PlaneType,seats Max,Setats Occ and others..
But when I goto TableEntry>List>Export-->Spreadsheet
->Table->Micro soft Excel..
we will ge the excel Carrid,Connid,Currency ,PlaneType,
Fldate,Price,seats Max,Setats Occ and others..
The Order is Changed.
1 - So, its the SAP default property? OR Do I need do/code some thing, to resemble the ALV displayed data(to meet my requiremenet)?
2- Generally, Wht is the procedure to get thru my requirement? I mean, am I doing correct?
Your help is appreciated.
With Regards,
Satish.
Edited by: satish akkina on Jan 17, 2008 7:34 PMHi Satish,
I am also facing this problem in one of my programs. Though I solved this problem temporarily by adding a new button to the Screen and have downloaded the file using GUI_DOWNLOAD function module, I would really like to know the reason for this and also the solution for this if you have known it by now.
Regards,
Amit. -
Function locator_within_distance is not working
Hi experts,
i'm using Oracle function "locator_within_distance" but getting ORA-13226: interface not supported without a spatial index error ..
what would be the way around??
Regards,
SKPHi.
You must ask your abap the following.
set a breakpoint in function: K_ABC_ORDER_MAT_CONFIRMATION
Run CPTA.
In the code, there is a IF that analize the Debit, Credit indicator. This is the code.
H
Credit
S
Debit
CASE ld_fields_wa-shkzg.
WHEN 'H'.
ld_wa_rval-value = ld_wa_rval-value + ld_value.
WHEN 'S'.
ld_wa_rval-value = ld_wa_rval-value - ld_value.
ENDCASE.
LD_FIELDS_WA-SHKZG
S
LD_WA_RVAL-VALUE
LD_VALUE
90.000
You have 2 options:
1. Copy the standard function and modify according to your needs
2. Use this formula: " 0 - OrderMaterialQuantityConf( Material = OrderMaterialNumber )", so the sign is changed.
PS. Im not sure if the function "OrderMaterialQuantityConf" work well, never tested in detail.
Arturo.
Maybe you are looking for
-
Change Capture For Siebel OLTP task in DAC running for more than 10 hours
whole etl load used to complete in 2 hours (as on now siebel data having sample data). since last Friday Change Capture For Siebel OLTP task in DAC execution plan running for more than 10 hours. I am not able to trouble shoot the problem because no l
-
Set links for a PDF in Illustrator
I am setting up a multipage newsletter in Illustrator CS5 on a Mac. After saving as a PDF I have been using Acrobat Pro to go in and set links to go to the next page, home, websites, etc. It is getting cumbersome to have to redo all the links every t
-
Logic x keeps quitting while using contact 5 plugins
Process: Logic Pro X [408] Path: /Volumes/VOLUME/*/Logic Pro X.app/Contents/MacOS/Logic Pro X Identifier: com.apple.logic10 Version: 10.0.7 (3166.30) Build Info: MALogic-3166030000000000~1 Code Type: X86-64
-
Attachment to received email not shown at all in Mail
I am using Mail and Safari on my Mac Mini with OS 10.8.5 (Mountain Lion). My email provider and ISP is BT/Yahoo! I received an email that had been written on and sent from an iPad. It was supposed to contain a one-page MS Word (.docx) text file as an
-
So our company has a Wildcard SSL Certificate that we use for most of our websites, and I've just setup a new 10.8 server for the use of profile manager. I've added our Wildcard SSL certificate to the systems keychain and trusted in but for the life