Alv text display
Hi expert,
In alv report totals are displayed as "TOTAL", And i need to display grand total as "GRAND TOTAL" as a text, but it over write the text as "TOTAL" as "GRAND TOTAL".
I will write the code below.
FORM subtotal_text CHANGING p_total TYPE any
p_subtot_text TYPE slis_subtot_text.
DATA: text TYPE string.
data: v_len type i,
V_LINE TYPE I.
v_len = lines( it_output ).
IF p_subtot_text-criteria = 'LIFNR'.
LOOP AT it_output INTO wa_output.
ON CHANGE OF wa_output-lifnr.
CONCATENATE wa_output-name 'TOTAL' INTO text SEPARATED BY SPACE.
p_subtot_text-display_text_for_subtotal = text.
CLEAR text.
ENDON.
ENDLOOP.
ENDIF.
if sy-index = v_len.
p_subtot_text-display_text_for_subtotal = 'GRAND TOTAL'.
endif.
ENDLOOP.
Thank you,
Dinesh.B
hi,
you can populate the text in the field catalog
Here's the sample code :
wa_layout-zebra = 'X'.
wa_layout-subtotals_text = 'Subtotals'
wa_layout-totals_text = 'Grandtotals'
wa_layout-numc_sum = 'X'.
and call the fm
thanks
Satish
Similar Messages
-
Popup from ALV for displaying full text = problems!!!
Dear all,
I created an ALV to display data. In this ALV, I have a text column, which just show FIRST 30 characters of the original text.
Now I want to double click on that field, and it will pop up a small window to show full text (the original text, unknown length).
I made lots of references and I decided to use FM POPUP_WITH_TABLE because of some reasons:
a) the original text is retrieved from another FM READ_TEXT. After the call of READ_TEXT, the text will be stored into an internal table. Then, it can be passed to POPUP_WITH_TABLE without more modification.
b) POPUP_WITH_TABLE can show the text more meaningfully. I mean, if the length of the text is greater than the length of the popup window, it <b>automatically break the line and displays the rest in the next line</b>. ( FM POPUP_TO_INFORM does NOT do that.)
However, I've faced some <b>PROBLEMS</b> with FM POPUP_WITH_TABLE
1) The popup window has 2 button OK and Cancel. <b>Is there any way just to display Cancel button?</b>
2) If I click on Cancel or OK without choose any line on the popup window => It will raise an exception, called BREAK_OFF. In this case
If the clicked button is CANCEL => it will close the popup
If the clicked button is OK => nothing happens. And I must click on CANCEL to close the popup.
<b>I want to close the popup windown without raising any exceptions. How can I ?</b>
3) When I enter many complex selection criteria on Selection Screen to limit the result, displaying ALV is good. But when I click on the text field to popup => the report cannot be manipulated. I have to kill the session in SM04.
<b>What's wrong? </b>(because for single selection criteria, it works well.)
Every body has any suggestions?
Thank you in advanceI solved it. I just use another list for pop-up event.
Although it worked well now, I thought it was not a good solution.
Thank you all of you.
Best regards. -
How can i change the column label text in a alv table display
how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
<i>* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).</i>
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
<i>"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."</i>
i have checked in debugging and the error occured at the statement :
<i>lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).</i>Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
SuriI found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
lr_if_controller TYPE REF TO iwci_salv_wd_table,
lr_cmdl TYPE REF TO cl_salv_wd_config_table,
lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
elem_year TYPE REF TO if_wd_context_element,
stru_year TYPE if_alv_layout=>element_importing,
item_year LIKE stru_year-i_current_year,
lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
EXPORTING
name = 'IMPORT_NODE-PARAMETER'
IMPORTING
value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( lf_string ).
endif. -
Text after end of each type in ALV GRID DISPLAY
Hi Experts,
My Requirement is that after end of every order type I need to give the text to display how many records are there under that order type in ALV GRID DISPLAY.
Sample internal table is shown below
Ordertyp date
PM1 25/05/2010
PM1 25/05/2010
PM2 25/05/2010
PM2 25/05/2010
PM2 25/05/2010
PM2 25/05/2010
Out put should be as shown below
PM1 25/05/2010
PM1 25/05/2010
Total PM1 order types are 2
PM2 25/05/2010
PM2 25/05/2010
PM2 25/05/2010
PM2 25/05/2010
Total PM2 Order types are 4
Total all order types are 6.
Please note here I am not doing any subtotal, just I want to display how many records are there under that particular order
Thanks
Babumiya MohammadHi,
whatever it may be you can very well use the given logic to build.
Let say you are making the final table for display. While final table display make the process and append the data in final table itself and pass it to ALV.
LOOP AT ITAB.
ITAB1-FLD1 = ITAB-FLD1
ITAB1-FLD2 = ITAB-FLD2
APPEND ITAB1.
*For making the count
L_Cnt = L_cnt + 1.
At end of OrdTYP
L_ord_text = L_cnt.
MOVE L_ORD_TEXT to L_SUB_TEXT.
L_TEXT1 = '' TOTAL"
L_TEXT2 = "Order types are"
concatenate L_TEXT ITAB-ORDTYP L_TEXT2 L_ord_text into l_TOT1.
ITAB1- FLD2 = L_TOT1.
APPEDN ITAB1.
clear : L_cnt, L_ord_text .
ENDLOOP.
L_TOT_TEXT = L_TOT_TEXT + L_SUB_TEXT ( Here you will get total order type count)
Do the conactenate
L_TEXT3 = " Total all order types are"
concatenate L_TEXT3 L_TOT_TEXT INTo L_TOT2.
ITAB1-FLD2 = L_TOT2.
APPEND IATB1.
Here you will total text. Like above you can build the logic. It will work fine.
You should not clear the L_SUB_TEXT. -
Hide delete option is not working in ALV List Display- urgent
Hi All,
In my program i am displaying the output by using alv list display. after displaying the data i am displaying my own pf status here. in this i have few pushbuttons like
selest all, deselect all, hide . first two options are working fine. when i click hide button selected records are going to be hide.but this is not happening in my program. any body cam send me the code plz.
i am sending my code below. if possible please modify and resend the code asap.
my code:
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
*data : box,
input(1) type c,
data : checkbox type c,
flag type c,
end of it_secobjects.
data : wa_ita like line of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
*DATA : it_filt type slis_t_filter_alv with header line.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
when 'HIDE_DEL'.
rs_selfield-exit = 'X'.
it_filt-fieldname = 'CHECKBOX'.
it_filt-tabname = '1'.
it_filt-valuf = 'X'.
it_filt-intlen = '1'.
it_filt-inttype = 'C'.
it_filt-datatype = 'CHAR'.
it_filt-valuf_int = 'X'.
it_filt-sign0 = 'E'.
it_filt-optio = 'EQ'.
if it_filt[] is initial.
append it_filt.
else.
modify it_filt index 1.
endif.
perform display using i_object.
PERForm ALV_LIST_DISPLAY.
WHEN 'SHOW_DEL'.
rs_selfield-exit = 'X'.
free it_filt.
PERForm ALV_LIST_DISPLAY.
when 'SAVE1'.
select * from zuser_secobjects where
appln = zuser_secobjects-appln
and appln_partner = zuser_secobjects-appln_partner
and partner_type = zuser_secobjects-partner_type
and start_date = zuser_secobjects-start_date
and end_date = zuser_secobjects-end_date.
endselect.
if sy-subrc eq 0.
message e000(ZV) with 'Duplicate Entry'.
endif.
endcase.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'CHECKBOX'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.tHi,
What do you mean by Hiding the records.
Deleting completely from the screen.
You can just delete the records from the internal table and pass to field catalog before displaying again.
or serach in the slis structrue for hiding the contents of the output.
reward if useful
regards,
Anji -
Issue in ALV List display
Posted: Apr 5, 2008 10:25 AM Edit E-mail this message Reply
Hi Friends,
Can any one help me out in the logic to display the output in the ALV list.
i want to get the out put as
based on the field4 i have to display fieds5, field6 and field 7 values as mentioned below.
field1 field2 field3 field4 field5 field6 field7
0L 123 456 2008 001 123.00 456.00
- - - - 002 213.00 789.00
- - - 003 0.00 0.00
- - - 004 0.00 0.00
- - - 005 0.00 0.00
- - - 006 0.00 0.00
336.00 1245.00
Thanks,
Vijayfor display you have to define fieldcatlaog and use Fm RESUE_ALV_GRID_DISPLAY,
Go through this program
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
MSEG, " Material Document: Item Data
MARA,
MARD,
S031,
EKKO,
EKPO,
LIKP,
MAKT,
J_1IWRKCUS,
T001W,
WB2_V_MKPF_MSEG2,
MMIM_REP_PRINT,
YW2_STKMOVEMENTS,
YPLNT,
MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
PPLNT LIKE YPLNT-PPLNT,
WPLNT LIKE YPLNT-WPLNT,
END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
VGART LIKE MKPF-VGART,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
KUNNR LIKE MSEG-KUNNR,
ZEILE LIKE MSEG-ZEILE,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
MATNR1 LIKE MSEG-MATNR,
END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
WERKS LIKE MARDH-WERKS,
MEINS LIKE MARA-MEINS,
MATNR LIKE MARDH-MATNR,
LGORT LIKE MARDH-LGORT,
LABST LIKE MARDH-LABST,
LFGJA LIKE MARDH-LFGJA, "Added -MB
LFMON LIKE MARDH-LFMON, "Added -MB
PERIO(6),
INSME LIKE MARDH-LABST,
EINME LIKE MARDH-LABST,
SPEME LIKE MARDH-LABST,
RETME LIKE MARDH-LABST,
O_STK LIKE MARDH-LABST, " Opening Stock
C_STK LIKE MARDH-LABST, " Closing Stock
END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
WERKS LIKE MARD-WERKS,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-LABST,
MEINS LIKE MARA-MEINS,
EINME LIKE MARD-LABST,
SPEME LIKE MARD-LABST,
RETME LIKE MARD-LABST,
END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
LGORT LIKE MSEG-LGORT, " Storage Location
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TLOSS LIKE MARDH-LABST, " Total Loss
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
C_STK LIKE MARDH-LABST, " Closing Stock
TRFSTK LIKE MARDH-LABST, "Transfer stock
MENGE LIKE MSEG-MENGE,
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
MTART LIKE MARA-MTART, " Material Type
MAKTX LIKE MAKT-MAKTX, " Description
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MEINS LIKE MARA-MEINS,
LABST TYPE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
MONTH(8) ,
END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
KEY WITH HEADER LINE INITIAL SIZE 0,
G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
MON(2),
FYEAR1(4),
MON1(2),
OBAL LIKE MARD-LABST,
CBAL LIKE MARD-LABST,
INDEX TYPE I,
COUNT,
COUNT1 TYPE I,
O_STK TYPE P DECIMALS 3,
C_STK TYPE P DECIMALS 3,
V_MJAHR LIKE MKPF-MJAHR,
MONTHS TYPE TRFF_TYPE_DEC_6_5,
MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
ALV_VARIANT LIKE DISVARIANT,
ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
ALV_REPID LIKE SY-REPID,
ALV_PRINT TYPE SLIS_PRINT_ALV,
ALV_DETAIL_FUNC(30),
ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
S_MBLNR FOR MKPF-MBLNR,
S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
M1 RADIOBUTTON GROUP P1,
Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
IF S_BUDAT-HIGH IS INITIAL.
S_BUDAT-HIGH = S_BUDAT-LOW.
MODIFY S_BUDAT.
ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = IDATE-LOW
I_DATE_TO = IDATE-HIGH
IMPORTING
E_DAYS =
E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
R_BUDAT-LOW = S_BUDAT-LOW.
APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
I = I + 1.
R_BUDAT-LOW+6(2) = '01'.
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_BUDAT-LOW
IMPORTING
LAST_DAY_OF_MONTH = R_BUDAT-HIGH
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
R_BUDAT-LOW = S_BUDAT-LOW.
MODIFY R_BUDAT.
ENDIF.
IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
R_BUDAT-HIGH = S_BUDAT-HIGH.
MODIFY R_BUDAT.
ENDIF.
For Summary on 26.4.05.
IF Y1 = 'X'.
CLEAR R_BUDAT.
REFRESH R_BUDAT.
R_BUDAT-LOW = S_BUDAT-LOW.
R_BUDAT-HIGH = S_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR R_BUDAT.
ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
MON1 = MON.
FYEAR1 = FYEAR.
MON = '12'.
FYEAR = FYEAR - 1.
ELSE.
MON1 = MON.
FYEAR1 = FYEAR.
MON = MON - 1.
FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
IF Y1 = 'X'.
LOOP AT S_BUDAT.
S_BUDAT1-SIGN = 'I'.
S_BUDAT1-OPTION = 'NB'.
S_BUDAT1-LOW = S_BUDAT-LOW.
S_BUDAT1-HIGH = S_BUDAT-HIGH.
APPEND S_BUDAT1.
CLEAR S_BUDAT1.
ENDLOOP.
ENDIF.
IMKPFT[] = I_MKPF[].
IMKPFT2[] = I_MKPF[].
IMARDT[] = I_MARD[].
IMARDHT[] = I_MARDH[].
PERFORM MONTH_WISE.
PERFORM PROCESS_MOVEMENTS.
PERFORM CALCULATE_OPENING_STOCK.
PERFORM UPDATE_NON_TRANSACTION_ITMS.
PERFORM DELETE_EMPTY_RECORDS.
CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
MF_MONAT LIKE ISELLIST-MONTH,
MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07.
IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
MF_HLP_REPID = 'SAPLALDB'.
ELSE.
READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
EXIT.
ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
EXPORTING
INPUT = MF_DYNPFIELDS-FIELDVALUE
IMPORTING
OUTPUT = MF_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
MF_MONAT = SY-DATLO(6).
ENDIF.
CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
EXPORTING
ACTUAL_MONTH = MF_MONAT
IMPORTING
SELECTED_MONTH = MF_MONAT
RETURN_CODE = MF_RETURNCODE
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 01
HOLIDAY_CALENDAR_NOT_FOUND = 02
MONTH_NOT_FOUND = 03.
IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
INPUT = MF_MONAT
IMPORTING
OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
COLLECT MF_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07. "<<== note 148804
ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR S_BUDAT.
REFRESH S_BUDAT.
S_BUDAT-SIGN = 'I'.
S_BUDAT-OPTION = 'BT'.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
APPEND S_BUDAT.
ELSE.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
MESSAGE I041 WITH TEXT-005.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
CLEAR S_BUDAT.
LOOP AT S_BUDAT.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
S_BUDAT-LOW+0(4) INTO LOW.
CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
S_BUDAT-HIGH+0(4) INTO HIGH.
CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
FHEADER-TYP = 'H'.
FHEADER-INFO = V_FIN1.
APPEND FHEADER.
CLEAR FHEADER.
ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_TOPOFPAGE'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_USER_COMMAND'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT. -
Total count to be displayed in subtotal ALV(GRID Display)
Hello ,
I want to display total count in subtotal.
720 Mr JORGE 522,06
720 Mr JORGE 566,23
720 Mr JORGE 100,33
720 Mr JORGE 123,33
720 Mr JORGE 332,22
subtotal -> 720 1644.2 Count 5
888 Ms Mariam 100,00
subtotal -> 888 100,00 Count 1
Is this possible? Plz dont post same answers how to display subtotal. I am able to display subtotal , only issue is to display with count.
Edited by: Vimalnair on Aug 19, 2009 9:37 AMHi,
You cannot have subtotal for particular number of rows of ALV,
but if you want to get the total number of rows of the ALV data display
you can describe your final internal table from which the data is
getting displayed in ALV output and get it displayed in the header
or footer area of the ALV output.
For Eg:
DATA V_LINES TYPE I.
DESCRIBE TABLE IT_FINAL LINES V_LINES.
DATA: it_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'COMM'
i_callback_top_of_page = 'TOP' "This top will call the subroutine namely TOP
FORM top.
REFRESH it_header.
wa_header-typ = 'S'.
wa_header-key = text-001.
wa_header-info = sy-repid.
APPEND wa_header TO it_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-key = text-002.
wa_header-info = sy-uname.
APPEND wa_header TO it_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-key = text-003.
wa_header-info = V_LINES. "This will print the total number of lines in the header
APPEND wa_header TO it_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_header
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "TOP
Hope it helps
Regards
Mansi -
Dump when summing up CURR field in ALV GRID display
Hi All,
I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23. I am using classes and methods to display alv grid.
I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
Here is the part it is throwing dump:
ls_lvc_data-value = space.
clear ls_lvc_data-style.
loop at it_fcat_local assigning <ls_fcat>
where tech ne 'X' and no_out ne 'X'.
if l_invisible eq 'X'.
clear l_invisible.
if <ls_fcat>-do_sum is initial.
continue.
else.
clear ls_lvc_data-col_pos.
endif.
endif.
add 1 to ls_lvc_data-col_pos.
assign component <ls_fcat>-fieldname
of structure <ls_data> to <l_field_value>.
_if sy-subrc ne 0.
message x000(0k).
endif._
Regards,
GuruThomas,
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/22/2010 23:30:53
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLSLVC" or "LSLVCF36"
"FILL_DATA_TABLE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
2708
is_subtottxt_info = ls_subtot_info
2709
ip_subtot_line = lr_data
2710
changing
2711
c_subtottxt = l_subtottxt.
2712
ls_lvc_data-value = l_subtottxt.
2713
2714
append ls_lvc_data to ct_lvc_data.
2715
endif.
2716
2717
2718
Column per Fieldcat Entry
2719
2720
ls_lvc_data-value = space.
2721
clear ls_lvc_data-style.
2722
loop at it_fcat_local assigning <ls_fcat>
2723
where tech ne 'X' and no_out ne 'X'.
2724
if l_invisible eq 'X'.
2725
clear l_invisible.
2726
if <ls_fcat>-do_sum is initial.
2727
continue.
2728
else.
2729
clear ls_lvc_data-col_pos.
2730
endif.
2731
endif.
2732
2733
add 1 to ls_lvc_data-col_pos.
2734
2735
assign component <ls_fcat>-fieldname
2736
of structure <ls_data> to <l_field_value>.
2737
if sy-subrc ne 0.
>>>>>
message x000(0k).
2739
endif.
2740
2741
*... work on average
2742
if <ls_fcat>-do_sum eq 'C'.
2743
Initialize average result and entries
2744
<l_field_value> = 0.
2745
clear l_entries.
2746
2747
retrive unit from fieldcatalog
2748
assign space to <l_unit>.
2749
if not <ls_fcat>-cfieldname is initial.
2750
assign component <ls_fcat>-cfieldname
2751
of structure <ls_data> to <l_unit>.
2752
endif.
2753
if not <ls_fcat>-qfieldname is initial.
2754
assign component <ls_fcat>-qfieldname
2755
of structure <ls_data> to <l_unit>.
2756
endif.
2757 -
How to edit particular field in alv list display-urgent
HI ALL,
my requirement is i am displaying output using alv list display. now my rewuirement :
i am displaying out in edit mode only. when user clicks one particular field
for example record is like
runrate a01 maheed -> if user clicks on a01 this field should be editable. i have a following code
w_field-edit = w_edit.
w_field-input = 'X'. -> using this code i can able to display entire colomn in edit mode. this not suits my requirement.anybody can send me the sample code please.
thanks,
maheedhar.tCan you please send me the sample code plz.
i am sending my code below.
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
data : checkbox type c value 'X',
action type c,
end of it_secobjects.
data : begin of it_secobjects1 occurs 0.
include structure ZUSER_SECOBJECTS.
data : checkbox type c VALUE 'X',
end of it_secobjects1.
data : wa_ita like line of it_secobjects.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
maheed-start.
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
delete it_SECOBJECTS.
endloop.
*RS_SELFIELD-REFRESH = 'X'.
maheed-end.
maheed-start. apr 13
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
delete it_SECOBJECTS.
endloop.
RS_SELFIELD-REFRESH = 'X'.
when 'SAVE'.
DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
commit work.
refresh :IT_SECOBJECTS1.
maheed-end. apr 13
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
ENDCASE.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog." USING w_edit TYPE any.
data : w_edit type c.
clear w_edit.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-EDIT = 'X'. "maheed
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_PARTNER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m03.
w_field-edit = w_edit.
w_field-input = 'X'.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'INACTIVE'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 3.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
DATA : LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'ACTION'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.t -
HI,
PLZ help me .
By using this code I select data from TXT file and insert data in CS13 transaction then I want to show each material which present in TXT file as ALV BLOCK DISPLAY.
Suppose txt file contain four material so report will show 4 list block .means data of every material showing in different blocks in the report.
Code which I am using showing data for last item from txt file in one block and other items showing when I click back button .
i am using below codes..........
*& Report ZCS13 *
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
Declaration of parameters
*SELECTION-SCREEN BEGIN OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_matnr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_werks.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_werks LIKE t001w-werks OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_albom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_albom LIKE stko-stlal DEFAULT ' '.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_bomap.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_bomap(4) DEFAULT 'PP01'.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b2.
*DATA :anr_datuv LIKE aenr-datuv.
*SELECTION-SCREEN BEGIN OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s03 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01 .
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_vfrom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_vfrom LIKE stpo-datuv DEFAULT sy-datum.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD pm_aennr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS pm_aennr LIKE aenr-aennr.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (17) FOR FIELD p_reqty.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_reqty LIKE stpo-menge DEFAULT '1' .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_assd.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_assd AS CHECKBOX.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
perform fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
form display_grid .
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZCS13'
i_callback_top_of_page = 'TOP_OF_PAGE_GRID'
is_layout = gs_layout
it_fieldcat = fieldcat
IT_SORT = GT_SORT[]
i_save = 'A'
it_events = gt_events[]
TABLES
t_outtab = it_stb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZALVTOTAL'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001)
IT_EXCLUDING =
*CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = i_fieldcat
i_tabname = 'IT_TAB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_tab[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
*IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
*ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
form fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " fldcatHi ,
plz check the below codeand suggest me why it not showing data.....
i make changes according to you ...
waiting for your reply
*& Report ZCS13 *
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
Declaration of parameters
*SELECTION-SCREEN BEGIN OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_matnr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_werks.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_werks LIKE t001w-werks OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_albom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_albom LIKE stko-stlal DEFAULT ' '.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_bomap.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_bomap(4) DEFAULT 'PP01'.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b2.
*DATA :anr_datuv LIKE aenr-datuv.
*SELECTION-SCREEN BEGIN OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s03 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01 .
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_vfrom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_vfrom LIKE stpo-datuv DEFAULT sy-datum.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD pm_aennr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS pm_aennr LIKE aenr-aennr.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (17) FOR FIELD p_reqty.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_reqty LIKE stpo-menge DEFAULT '1' .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_assd.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_assd AS CHECKBOX.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZCS13'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001).
IT_EXCLUDING =.
DATA :int1(10) .
PERFORM fldcat.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
PERFORM fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
FORM display_grid .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
FORM fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " fldcat -
How to get subtotal value in ALV list display
Hi all,
How to give condition on the value of subtotal line in ALV list display,
i.e.if value of subtotal of plan quantity = actual quantity (in red oval) it should show the message
'ON TIME DELIVERY' else it should not show messagee.In my case(shown in red oval) its
showing for each subtotal value. I know how to change the subtotal text but i want to change
with respect to value of the subtotal.(plz refer attachment)
Any input regard to this will be achieved great.
Many thanks in advance.
samadhan shinde.Hi Samadhan,
I am awaiting for solution for this problem.....but as i think dynamically displaying sub total based on
matching actual quantity and planned quantity is bit complicated.
My idea is to display matched quantities in one block and unmatched quantities in another. I mean using blocked list.
awaiting suggestions.
regards, -
How to give a page break in alv grid display after 65 lines are displayed?
hi all,
I need to give a page break in alv grid display after 65 lines are displayed on each page...Please help me with this...hai
give this command beging of the report name... u have to diclar the beging of the report ......
<b>report</b> ( name of the report) <b>standard page heading line-size 200 line-count 65.</b>
ex1.:- report name is rtpm_trl_show_flows
report <b>rtpm_trl_show_flows </b> no standard page heading line-size 200
line-count 65.
ex:2
report <b>zlpur01</b> no standard page heading line-size 200
line-count 65.
type-pools: slis.
tables: bkpf.
selection-screen begin of block sel with frame title text-001.
select-options: s_comp for bkpf-bukrs, " Company
s_valut for bkpf-budat. " Invoice Date
S_MTART FOR MARA-MTART. " Material Type
selection-screen end of block sel.
parameters: p_vari like disvariant-variant. " ALV Variant
constants: formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
data: i_bseg type bseg occurs 0 with header line.
data: vatval type p decimals 2 value '0.15'.
data: xhkont type string value '154000'.
data COM type c.
data: begin of invt occurs 100,
budat like bkpf-budat, " Inv Dat
bukrs like bkpf-bukrs, " Material
STCEG like bsak-STCEG, "name of the companycode
belnr like bkpf-belnr,
xblnr like bkpf-xblnr, " Inv Reference
ebeln like rseg-ebeln, " PO number
lifnr like bseg-lifnr, " Vendor No
name1 like lfa1-name1, " Supplier Name
matnr like bseg-matnr,
maktx like makt-maktx,
stcd1 like lfa1-stcd1, " Supplier VAT REG NO
xamt like bseg-dmbtr, " TAX amt
yamt like bseg-wrbtr,
wrbtr like bseg-wrbtr, " Base amount
mwskz like bseg-mwskz,
dmbtr like bseg-dmbtr, " TAX amt
gjahr like bkpf-gjahr,
hkont like bseg-hkont,
zamt like bseg-dmbtr, " TAX amt
wamt like bseg-dmbtr,
shkzg like bseg-shkzg,
shkzg1 like bseg-shkzg,
end of invt.
regard
nawa -
Help on ALV GRID display outputting format for 2 internal tables
Hi,
I have requirement in ALV GRID where I need to display the data from 2 internal tables. The first internal table has the content of Delivery due list data and second the internal table has the corresponding stock transfer data of the Delivery Due list. I have a checbox on my selection screen, when unchecked it should output the 1st internal table data, i.e for Delivery due list. When it is checked then it should output 1st Internal table data + 2nd internal table data of stock transfer. For example, 1 document delivery due list data and 2nd line for that document should show the stock transfer data. You can also check the transaction code VL10E for that will show a delivery due list...and for stock tranfer,you need to check with Purchase order in in the USer Role tabstrip. Pls suggest.
Regards,
MiraHi,
U can try out this code
REPORT zzz_test NO STANDARD PAGE HEADING
MESSAGE-ID zz.
The Data Declarations
INCLUDE zzm_test_alv_data.
The Selection Screen Definition
INCLUDE zzm_test_alv_selscrn.
The definition and implementation of the event reciever class
INCLUDE zzm_test_alv_class.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM f1000_load_itabs.
END-OF-SELECTION
END-OF-SELECTION.
IF NOT cb_disp IS INITIAL.
CALL SCREEN 9001.
ENDIF.
Include for getting data
INCLUDE zzm_test_alv_forms.
Include for PAI and PBO of screen
INCLUDE zzm_test_alv_screen.
INCLUDE ZZM_TEST_ALV_DATA *
This include has all the data declaration defined
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
Table Declarations:
TABLES: mara,
makt.
Internal Tables:
The following structure type must be defined in the data dictionary
DATA: i_fieldcat TYPE lvc_t_fcat,
i_fieldcat1 TYPE lvc_t_fcat,
i_output1 TYPE STANDARD TABLE OF mara,
i_output2 TYPE STANDARD TABLE OF makt,
Work Areas:
w_output1 TYPE STANDARD TABLE OF mara,
w_output2 TYPE STANDARD TABLE OF makt.
Variable:
DATA: lv_repid LIKE sy-repid.
lv_repid = sy-repid.
INCLUDE ZZM_TEST_ALV_SELSCRN *
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
SELECTION-SCREEN BEGIN OF BLOCK b_main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS: cb_disp AS CHECKBOX.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN END OF BLOCK b_main.
INCLUDE ZZM_TEST_ALV_CLASS *
This include has all the data declaration defined for ALV
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
INCLUDE <icon>.
Predefine a local class for event handling to allow the
declaration of a reference variable before the class is defined.
DATA : o_alvgrid1 TYPE REF TO cl_gui_alv_grid ,
o_alvgrid2 TYPE REF TO cl_gui_alv_grid ,
cont_for_cognos1 TYPE scrfname VALUE 'BCALC_GRID_01_9100',
cont_for_cognos2 TYPE scrfname VALUE 'BCALC_GRID_01_9200',
custom_container1 TYPE REF TO cl_gui_custom_container,
custom_container2 TYPE REF TO cl_gui_custom_container,
Work Area
w_layout TYPE lvc_s_layo ,
w_variant TYPE disvariant.
Constants
CONSTANTS : c_lay(1) TYPE c VALUE 'A' . " All Layouts
CONSTANTS: BEGIN OF c_main_tab,
tab1 LIKE sy-ucomm VALUE 'MAIN_TAB_FC1', "
tab2 LIKE sy-ucomm VALUE 'MAIN_TAB_FC2', "
END OF c_main_tab.
INCLUDE ZZM_TEST_ALV_FORMS *
This Include has the various forms used in the program
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
*& Form f9001_build_field_cat
To Build Field Catalog
-->P_I_FIELDCAT text
-->P_0021 text
FORM f9001_build_field_cat TABLES p_fieldcat STRUCTURE lvc_s_fcat
USING value(p_structure).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_structure
CHANGING
ct_fieldcat = p_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE i005 WITH 'Error in ALV field catalogue creation'.
" text-e05.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " f9001_build_field_cat
*& Form f9000_objects_create
For creating Custom Containers
--> p1 text
<-- p2 text
FORM f9000_objects_create.
CREATE OBJECT custom_container1
EXPORTING
container_name = cont_for_cognos1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
CREATE OBJECT custom_container2
EXPORTING
container_name = cont_for_cognos2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = lv_repid
txt2 = sy-subrc
txt1 = 'The control could not be created'(510).
ENDIF.
CREATE OBJECT o_alvgrid1
EXPORTING i_parent = custom_container1.
CREATE OBJECT o_alvgrid2
EXPORTING i_parent = custom_container2.
ENDFORM. " f9000_objects_create
*& Form f9003_layout
To define the layout
-->P_SY_TITLE text
-->P_0030 text
-->P_0031 text
-->P_0032 text
FORM f9003_layout USING value(ptitle)
value(pzebra)
value(pmode)
value(pwidth).
w_layout-grid_title = ptitle.
w_layout-zebra = pzebra.
w_layout-sel_mode = pmode.
w_layout-cwidth_opt = pwidth.
w_variant-report = sy-repid.
ENDFORM. " f9003_layout
*& Form f9006_error_handle
To handle event
-->P_PTEXT text
FORM f9006_error_handle USING value(ptext).
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = text-e03 " Error Note
txt2 = sy-subrc
txt1 = ptext.
ENDIF.
ENDFORM. " f9006_error_handle
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD custom_container1->free.
CALL METHOD custom_container2->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = lv_repid
txt2 = sy-subrc
txt1 = 'Error in FLush'(500).
ENDIF.
ENDFORM.
*& Form f1000_load_itabs
Select from Database
--> p1 text
<-- p2 text
form f1000_load_itabs.
SELECT * FROM mara
INTO TABLE i_output1
UP TO 50 rows.
SELECT * FROM makt
INTO TABLE i_output2
UP TO 50 rows.
endform. " f1000_load_itabs
INCLUDE ZZM_TEST_ALV_SCREEN *
2/ Description / Include functions
This include contains PBO and PAI events for the screen of report
ZZZJJ_TEST_ALV
3/ Responsibility
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
DATA FOR TABSTRIP 'MAIN_TAB'
CONTROLS: main_tab TYPE TABSTRIP.
DATA: BEGIN OF i_main_tab,
subscreen LIKE sy-dynnr,
prog LIKE sy-repid VALUE
'ZZZ_TEST',
pressed_tab LIKE sy-ucomm VALUE c_main_tab-tab1,
END OF i_main_tab.
*& Module STATUS_9001 OUTPUT
text
MODULE status_9001 OUTPUT.
IF custom_container1 IS INITIAL.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
Creating Object
PERFORM f9000_objects_create.
Building the field catalog
PERFORM f9001_build_field_cat TABLES i_fieldcat
USING 'MARA'.
PERFORM f9001_build_field_cat TABLES i_fieldcat1
USING 'MAKT'.
Modifying the field catalog
PERFORM f9002_modify_field_cat TABLES i_fieldcat.
For Layout
PERFORM f9003_layout USING sy-title 'X' 'B' 'X'.
ENDIF.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module MAIN_TAB_ACTIVE_TAB_SET OUTPUT
Call method to display in the output grid
MODULE main_tab_active_tab_set OUTPUT.
main_tab-activetab = i_main_tab-pressed_tab.
CASE i_main_tab-pressed_tab.
WHEN c_main_tab-tab1.
To display report
i_main_tab-subscreen = '9100'.
CALL METHOD o_alvgrid1->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = c_lay
is_layout = w_layout
CHANGING
it_outtab = i_output1[]
it_fieldcatalog = i_fieldcat[]
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i000 WITH text-e06."Error in ALV report display
LEAVE LIST-PROCESSING.
ENDIF.
WHEN c_main_tab-tab2.
To display report
i_main_tab-subscreen = '9200'.
CALL METHOD o_alvgrid2->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = c_lay
is_layout = w_layout
CHANGING
it_outtab = i_output2[]
it_fieldcatalog = i_fieldcat1[]
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i005 WITH text-e06."Error in ALV report display
LEAVE LIST-PROCESSING.
ENDIF.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. MAIN_TAB_ACTIVE_TAB_SET OUTPUT
*& Module MAIN_TAB_ACTIVE_TAB_GET INPUT
Check & Process the selected Tab
MODULE main_tab_active_tab_get INPUT.
CASE sy-ucomm.
WHEN c_main_tab-tab1.
i_main_tab-pressed_tab = c_main_tab-tab1.
WHEN c_main_tab-tab2.
i_main_tab-pressed_tab = c_main_tab-tab2.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. MAIN_TAB_ACTIVE_TAB_GET INPUT
*& Module USER_COMMAND_9001 INPUT
User Command
MODULE user_command_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
PERFORM exit_program.
SET SCREEN '0'.
WHEN 'EXIT' OR 'CANC'.
PERFORM exit_program.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. USER_COMMAND_9000 INPUT
*& Module MAIN_TAB_ACTIVE_TAB_SET INPUT
Set sunscreen
MODULE main_tab_active_tab_set INPUT.
main_tab-activetab = i_main_tab-pressed_tab.
CASE i_main_tab-pressed_tab.
WHEN c_main_tab-tab1.
i_main_tab-subscreen = '9100'.
WHEN c_main_tab-tab2.
i_main_tab-subscreen = '9200'.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. MAIN_TAB_ACTIVE_TAB_SET INPUT
Thanks & Regards,
Judith. -
Problem with ALV Grid Display screen Back Button
Dear Friends ,
I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
Please Suggest if i have to take care of something else.
I want my Selection Screen when i press Back on my Display Screen.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
Thanks and Regards,
AshwiniHi Vijay ,
No i dont have any write statement in my proggram.
Here it is
REPORT ZRMMPD01A NO STANDARD PAGE HEADING.
TABLES : EQUI,SER03,MKPF,OBJK.
TYPE-POOLS : SLIS.
DATA IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
DATA IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
DATA IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF IT_DISPLAY OCCURS 0,
MATNR LIKE EQUI-MATNR,
SERNR LIKE EQUI-SERNR,
BWART LIKE SER03-BWART,
WERK LIKE SER03-WERK,
CHARGE LIKE SER03-CHARGE,
LAGERORT LIKE SER03-LAGERORT,
MBLNR LIKE SER03-MBLNR,
MJAHR LIKE SER03-MJAHR,
ZEILE LIKE SER03-ZEILE,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
USNAM LIKE MKPF-USNAM,
XBLNR LIKE MKPF-XBLNR,
END OF IT_DISPLAY.
DATA : WA_DISPLAY LIKE IT_DISPLAY.
DATA IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
START-OF-SELECTION.
*Fetch Data.
PERFORM GET_DATA.
*Fill Display Fields.
PERFORM FILL_TABLE.
*Segregate data according to radio button selection.
PERFORM SELECT_CONDITION.
*Fill The Feild catalog.
PERFORM FIELD_CATALOG.
*Display Output.
PERFORM OUTPUT_DISPLAY..
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT * FROM EQUI INTO TABLE IT_EQUI
WHERE MATNR IN S_MATNR
AND SERNR IN S_SERNR.
SELECT * FROM OBJK INTO TABLE IT_OBJK
FOR ALL ENTRIES IN IT_EQUI
WHERE EQUNR = IT_EQUI-EQUNR.
SELECT * FROM SER03 INTO TABLE IT_SER03
FOR ALL ENTRIES IN IT_OBJK
WHERE OBKNR = IT_OBJK-OBKNR
AND MBLNR IN S_MBLNR
AND BWART IN S_BWART
AND WERK IN S_WERK
AND LAGERORT IN S_LAGET.
SELECT * FROM MKPF INTO TABLE IT_MKPF
FOR ALL ENTRIES IN IT_SER03
WHERE MBLNR = IT_SER03-MBLNR
AND BUDAT IN S_BUDAT
AND XBLNR IN S_XBLNR.
ENDFORM. " GET_DATA
*& Form FILL_TABLE
text
--> p1 text
<-- p2 text
FORM FILL_TABLE.
LOOP AT IT_EQUI.
LOOP AT IT_OBJK.
IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
SKIP.
ELSE.
READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
IF SY-SUBRC = 0.
WA_DISPLAY-MATNR = IT_EQUI-MATNR.
WA_DISPLAY-SERNR = IT_EQUI-SERNR.
WA_DISPLAY-BWART = IT_SER03-BWART.
WA_DISPLAY-WERK = IT_SER03-WERK.
WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
IF SY-SUBRC = 0.
WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
WA_DISPLAY-USNAM = IT_MKPF-USNAM.
WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
ENDIF.
ENDIF.
ENDIF.
IF NOT WA_DISPLAY IS INITIAL.
APPEND WA_DISPLAY TO IT_DISPLAY.
CLEAR WA_DISPLAY.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDFORM. " FILL_TABLE
*& Form FIELD_CATALOG
text
--> p1 text
<-- p2 text
FORM FIELD_CATALOG.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MATNR'.
FIELDCAT-SELTEXT_M = 'Material Number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'SERNR'.
FIELDCAT-SELTEXT_M = 'Serial number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MBLNR'.
FIELDCAT-SELTEXT_L = 'Number of material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BWART'.
FIELDCAT-SELTEXT_M = 'Movement type'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'WERK'.
FIELDCAT-SELTEXT_M = 'Plant'.
FIELDCAT-OUTPUTLEN = 5.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'CHARGE'.
FIELDCAT-SELTEXT_M = 'Batch number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'LAGERORT'.
FIELDCAT-SELTEXT_M = 'Storage Location'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MJAHR'.
FIELDCAT-SELTEXT_M = 'Material doc. year'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'ZEILE'.
FIELDCAT-SELTEXT_L = 'Item in material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BUDAT'.
FIELDCAT-SELTEXT_L = 'Posting date in the document'.
FIELDCAT-OUTPUTLEN = 10.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BKTXT'.
FIELDCAT-SELTEXT_L = 'Document header text'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'USNAM'.
FIELDCAT-SELTEXT_M = 'User name'.
FIELDCAT-OUTPUTLEN = 15.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'XBLNR'.
FIELDCAT-SELTEXT_L = 'Reference document number'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
ENDFORM. " FIELD_CATALOG
*& Form DISPLAY_OUTPUT
text
--> p1 text
<-- p2 text
FORM OUTPUT_DISPLAY.
IF R1 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_DISPLAY
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ELSEIF R2 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form SELECT_CONDITION
text
--> p1 text
<-- p2 text
FORM SELECT_CONDITION.
IF R2 = 'X'.
CLEAR WA_DISPLAY.
SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
IF SY-SUBRC = 0.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY.
IF WA_DISPLAY IS INITIAL.
WA_DISPLAY = IT_DISPLAY.
ENDIF.
LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
AND SERNR = WA_DISPLAY-SERNR.
IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
WA_DISPLAY = IT_DISPLAY.
ELSE.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
APPEND WA_DISPLAY TO IT_TEMP.
CLEAR WA_DISPLAY.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP.
IF NOT IT_TEMP[] IS INITIAL.
IT_FINAL[] = IT_TEMP[].
ENDIF.
ENDIF.
ENDFORM. " SELECT_CONDITION
Regards,
Ashwini -
Not able to download all the rows to excel sheet from alv grid display
Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = p_capid
datuv = sy-datum
ehndl = '1'
mktls = 'X'
mehrs = 'X'
mmory = '1'
mtnrv = p_matnr
stlal = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = i_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
SORT i_stb1 BY idnrk.
DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
FOR ALL ENTRIES IN i_stb1
WHERE bmatn = i_stb1-idnrk AND
datuv LE sy-datum AND
datub GE sy-datum.
SELECT
matnr
bwkey
verpr
stprs
bwprh
FROM mbew
INTO TABLE i_mbew
FOR ALL ENTRIES IN i_stb1
WHERE
matnr EQ i_stb1-idnrk AND
bwkey EQ i_stb1-werks.
IF NOT i_stb1[] IS INITIAL.
SELECT matnr werks beskz
dzeit webaz plifz
ekgrp
INTO TABLE i_marc
FROM marc
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_marc BY matnr werks.
ENDIF.
CLEAR i_ekpo.
CLEAR i_vend.
IF NOT i_stb1[] IS INITIAL.
SELECT ebeln ebelp matnr werks loekz aedat
netpr peinh
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_ekpo BY matnr ASCENDING
aedat DESCENDING
ebeln DESCENDING
ebelp DESCENDING.
IF NOT i_ekpo IS INITIAL.
SELECT k~ebeln k~lifnr l~name1
INTO TABLE i_vend
FROM ekko AS k INNER JOIN lfa1 AS l
ON k~lifnr EQ l~lifnr
FOR ALL ENTRIES IN i_ekpo
WHERE ebeln = i_ekpo-ebeln.
SORT i_vend BY ebeln.
ENDIF.
ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
SORT i_ampl1 BY ematn.
DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
FOR ALL ENTRIES IN i_ampl1
WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
INTO TABLE i_stpo
FROM stpo
FOR ALL ENTRIES IN i_stb
WHERE stlty = i_stb-stlty
AND stlnr = i_stb-stlnr
AND stlkn = i_stb-stlkn
AND stpoz = i_stb-stpoz
AND idnrk = i_stb-idnrk.
SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
READ TABLE i_marc INTO wa_marc
WITH KEY matnr = wa_stb-idnrk
werks = wa_stb-werks
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-beskz = wa_marc-beskz.
wa_outtab-dzeit = wa_marc-dzeit.
wa_outtab-webaz = wa_marc-webaz.
wa_outtab-plifz = wa_marc-plifz.
wa_outtab-ekgrp = wa_marc-ekgrp.
ENDIF.
READ TABLE i_ekpo INTO wa_ekpo
WITH KEY matnr = wa_stb-idnrk.
IF sy-subrc = 0.
wa_outtab-netpr = wa_ekpo-netpr.
wa_outtab-peinh = wa_ekpo-peinh.
READ TABLE i_vend INTO wa_vend
WITH KEY ebeln = wa_ekpo-ebeln
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-lifnr = wa_vend-lifnr.
wa_outtab-name_sup = wa_vend-name1.
ENDIF.
ENDIF.
READ TABLE i_stpo INTO wa_stpo
WITH KEY stlty = wa_stb-stlty
stlnr = wa_stb-stlnr
stlkn = wa_stb-stlkn
stpoz = wa_stb-stpoz
idnrk = wa_stb-idnrk
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-potx1 = wa_stpo-potx1.
wa_outtab-potx2 = wa_stpo-potx2.
ENDIF.
READ TABLE i_mbew INTO wa_mbew
WITH KEY
matnr = wa_stb-idnrk
bwkey = wa_stb-werks.
IF sy-subrc IS INITIAL.
MOVE:
wa_mbew-verpr TO wa_outtab-verpr,
wa_mbew-stprs TO wa_outtab-stprs,
wa_mbew-bwprh TO wa_outtab-bwprh.
ENDIF.
wa_outtab-matnr = p_matnr.
wa_outtab-posnr = wa_stb-posnr.
wa_outtab-stufe = wa_stb-stufe.
wa_outtab-idnrk = wa_stb-idnrk.
wa_outtab-ojtxb = wa_stb-ojtxp.
wa_outtab-menge = wa_stb-menge.
wa_outtab-meins = wa_stb-meins.
MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
IF wa_stb-upskz = 'X'.
SELECT * FROM stpu INTO TABLE i_stpu
WHERE stlty = wa_stb-stlty AND
stlnr = wa_stb-stlnr AND
stlkn = wa_stb-stlkn AND
stpoz = wa_stb-stpoz.
ENDIF.
LOOP AT i_stpu INTO wa_stpu.
wa_outtab-upmng = wa_stpu-upmng.
wa_outtab-ebort = wa_stpu-ebort.
wa_outtab-uposz = wa_stpu-uposz.
CONCATENATE v_ebort wa_stpu-ebort INTO v_ebort
SEPARATED BY space.
ENDLOOP.
MOVE strlen( v_ebort ) TO v_len.
MOVE: 0 TO x,
128 TO y.
DATA : lt_tab TYPE TABLE OF swastrtab.
DATA : ls_tab LIKE LINE OF lt_tab.
DATA : lv_ebort TYPE string.
CLEAR lv_ebort. CLEAR lt_tab.
MOVE v_ebort TO lv_ebort.
CALL FUNCTION 'SWA_STRING_SPLIT'
EXPORTING
input_string = lv_ebort
max_component_length = 128
TABLES
string_components = lt_tab
EXCEPTIONS
max_component_length_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF lt_tab[] IS NOT INITIAL.
LOOP AT lt_tab INTO ls_tab.
CLEAR lv_ebort.
MOVE: ls_tab-str TO lv_ebort.
CONDENSE lv_ebort.
MOVE lv_ebort TO wa_outtab-ebort.
APPEND wa_outtab TO i_outtab.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
* wa_outtab-idnrk.
ENDLOOP.
ELSE.
APPEND wa_outtab TO i_outtab.
ENDIF.
CLEAR v_ebort.
CLEAR: wa_stpu.
REFRESH: i_stpu.
LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
IF sy-subrc = 0.
LOOP AT i_outtab INTO wa_outtab
WHERE
idnrk = wa_stb-idnrk AND
flag NE 'X'.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
MOVE 'X' TO wa_outtab-flag.
MODIFY i_outtab FROM wa_outtab
TRANSPORTING mfrpn mfrnr name1 flag.
EXIT.
ENDLOOP.
IF sy-subrc <> 0.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-ebort,
* wa_outtab-idnrk,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
APPEND wa_outtab TO i_outtab.
ENDIF.
ENDIF.
REFRESH i_stpu.
CLEAR i_stpu.
ENDLOOP. CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM
Maybe you are looking for
-
You have insufficient privileges for the current operation-Getting error running OAF page in R12
I have a custom OAF page in R11 which is working fine. Same page is giving below errors in R12. Any suggestions how to resolve this issue..please advice. [167]:STATEMENT:[fnd.framework.webui.OAPageSecurity]:MAC validation status = false [167]:STAT
-
Will the A1347 MacMini work with a Thunderbolt display 27 inch?
I have a Thunderbolt diplay 27 inch. I would like to know if a Mac Mini 2010( MC270LL/A) Model A1347 display port be use to turn on diplay?
-
Image instead of broken Flash icon
Hello all. Does anyone know if there is a way to show a jpeg image while a Flash file is loading or better, if they don' t have Flash? Problem is that when people go to a site and they don't have Flash and can't install it (ie: iPhone), they can't se
-
Adobe Reader - Need to find a 3D PDF Tools Quick Reference Guide - HELP!!!!
Where can I find a QRG or even detailed instructions on how to use the 3D PDF tools. Showing hotkeys, mouse usage such as "to rotate an object hold down the left mouse button and move cursor". I have not been able to find anything useful on the web
-
Where do I use flash in the order of things?
So I am making an animated DVD menu. I want to be able to link the words in photoshop with a "#" in front of the name so they show up automatically in Encore. Do I do this all in Flash? Or do I do something in Photoshop first? Also should I use actio