ALV usage question
Hi,
What's the difference between REUSE_ALV_GRID_DISPLAY and REUSE_ALV_GRID_DISPLAY_LVC?
Thx.
Andy
Similar post...
Link:diffrence
Similar Messages
-
/ usage questions...
Hello.
I have 2 questions:
1. I have noticed that my / partition's used space increased by ~10M from the last time I've checked it, from 111M to 121M. What could be the cause of that? (see the info below...)
2. The output of df and du is not what I am expecting it to be. I.e. there are differences between the disk usage reported by these 2 commands on the / partition. What could be the cause of this? (see the info below...)
Any reply or any RTFM re-dirrectioning is appreciated.
TIA
Info:
[root@guns /]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/ide/host0/bus0/target0/lun0/part5
189M 121M 68M 65% /
none 235M 0 235M 0% /dev/shm
tmpfs 235M 4.0K 235M 1% /tmp
/dev/ide/host0/bus0/target0/lun0/part2
31M 5.2M 24M 18% /boot
/dev/ide/host0/bus0/target0/lun0/part6
2.4G 713M 1.7G 30% /usr
/dev/ide/host0/bus0/target0/lun0/part7
1.9G 374M 1.5G 20% /var
/dev/ide/host0/bus0/target0/lun0/part8
57G 35G 23G 62% /home
/dev/ide/host0/bus0/target0/lun0/part9
957M 486M 472M 51% /opt
[root@guns /]# ls
bin boot dev etc home lib mnt opt proc root sbin sys tmp udev usr var
[root@guns /]# du -sh bin/ dev/ etc/ lib/ mnt/ proc/ root/ sbin/ sys/ tmp/ udev/
2.8M bin/
0 dev/
5.5M etc/
64M lib/
0 mnt/
481M proc/
12M root/
5.2M sbin/
du: cannot access `sys/bus/pci/drivers/Intel(R) 830M/845G/852GM/855GM/865G Framebuffer Driver': No such file or directory
0 sys/
4.0K tmp/
0 udev/
Here's my dmesg output in case it helps...
Linux version 2.6.11.7-ARCH (root@earth) (gcc version 3.4.3) #1 SMP Sat Apr 9 13:37:54 PDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001dffc000 (usable)
BIOS-e820: 000000001dffc000 - 000000001dfff000 (ACPI data)
BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
479MB LOWMEM available.
On node 0 totalpages: 122876
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 118780 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6b10
ACPI: RSDT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc000
ACPI: FADT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc080
ACPI: BOOT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc040
ACPI: DSDT (v001 ASUS A7VI-VM 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1ff0000)
Built 1 zonelists
Kernel command line: root=/dev/hda5 vga=773 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (013e3000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 807.525 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 480548k/491504k available (4086k kernel code, 10360k reserved, 1236k data, 288k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1597.44 BogoMIPS (lpj=798720)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e00)
CPU0: AMD Duron(tm) Processor stepping 01
per-CPU timeslice cutoff: 182.83 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 1
groups: 1
domain 1: span 1
groups: 1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050228
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [email protected]
** so I can fix the driver.
pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:02: ioport range 0xe800-0xe80f has been reserved
pnp: 00:02: ioport range 0xe200-0xe27f has been reserved
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [email protected]).
SGI XFS with ACLs, security attributes, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
vesafb: framebuffer at 0xf0000000, mapped to 0xde880000, using 1536k, total 32768k
vesafb: mode is 1024x768x8, linelength=1024, pages=41
vesafb: protected mode interface info at c000:7f88
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 409M
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized drm 1.0.0 20040925
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.9.2
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
spurious 8259A interrupt: IRQ7.
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 >
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
libata version 1.10 loaded.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
psmouse.c: Failed to reset mouse on isa0060/serio1
input: PS/2 Generic Mouse on isa0060/serio1
psmouse.c: Failed to enable mouse on isa0060/serio1
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1080.000 MB/sec
8regs_prefetch: 1020.000 MB/sec
32regs : 812.000 MB/sec
32regs_prefetch: 764.000 MB/sec
pII_mmx : 2168.000 MB/sec
p5_mmx : 2904.000 MB/sec
raid5: using function: p5_mmx (2904.000 MB/sec)
raid6: int32x1 332 MB/s
raid6: int32x2 410 MB/s
raid6: int32x4 265 MB/s
raid6: int32x8 253 MB/s
raid6: mmxx1 675 MB/s
raid6: mmxx2 1136 MB/s
raid6: sse1x1 644 MB/s
raid6: sse1x2 1058 MB/s
raid6: using algorithm sse1x2 (1058 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 PCI1 UAR1 UAR2 USB0 USB1
ACPI: (supports S0 S1 S4 S5)
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
rans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 288k freed
Adding 96380k swap on /dev/discs/disc0/part3. Priority:-1 extents:1
Adding 96348k swap on /dev/discs/disc0/part10. Priority:-2 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
rans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
rans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
rans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
ReiserFS: hda9: found reiserfs format "3.6" with standard journal
ReiserFS: hda9: using ordered data mode
ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
rans age 30
ReiserFS: hda9: checking transaction log (hda9)
ReiserFS: hda9: Using r5 hash to sort names
Real Time Clock Driver v1.12
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xded90000, 00:50:fc:cd:88:dd, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Forcing 10Mbps half-duplex operation.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:07.5 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: irq 9, io base 0xd400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: irq 9, io base 0xd000
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
usb 2-2: new full speed USB device using uhci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Disabled Privacy Extensions on device c05d68a0(lo)
Vendor: USB MASS Model: STORAGE DEVICE Rev: 0.10
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
eth0: no IPv6 routers presentThe PC was indeed turned off between the two checks.
However the first check was not performed right before the shutdown, but few hours before it.
:idea:
(...) varying from browser cache data increase to a cronjob like updatedb, or even you installing or downloading something.
When I've read these words I have started to "scroll" back in my memory buffer and eventually I've remembered that the only thing I did as superuser was to download some Firefox extensions which (surprise or not...) summed up to ~12M.
So we have the answer for this one too thanks to your hints
PS: That's exactly the reason why I've made a small / partition - to keep a close eye on it's usage and to ring some allarms when needed.
Again, thank you. -
hi folks,
i have a question here.
in a screen , i've created two containers for two alv grids. the question is can i print the two reports on the same paper?
looking forward your reply.
thankshi folks,
i have a question here.
in a screen , i've created two containers for two alv grids. the question is can i print the two reports on the same paper?
looking forward your reply.
thanks -
Hello All,
I am displaying a query through SQ01, it is as any ALV report, there are a few controls on top of the list one of them is filter and thats where I have the question.
I have a list like this as output of the program:
Status Hours Name
True 0 John
True 1 Joe
False 0 Smith
True 1 Scott
False 1 Cindy
Now, do not want to show the records that have (Status = False and Hours = 0), Which will remove the 3rd record from the display.
How can this be accomplished through the FILTER icon?
Again, this is not a custom program so I cannot simply add this condition inside ABAP, I have to do something through toolbar icons.
I have tried different options in FILTER but it is not putting an "AND" logical condition between the two.
Thanks a lot!You need to set two filters to achieve this functionality.
One for the Status and Second for the Hours.
Press the Filter Icon.
Select both fields from the right side and move it to left side by pressing the left arrow button. Press Enter
In the next screen, use the F4 for avaliable values and select FALSE for the status and 0 for the Hours.
You can save this setting in one Layout variant and use that for future use to avoid setting filter everytime you run the report.
Regards,
Naimesh Patel -
CPU Usage Question between Premier and Media Encoder
Hey guys,
Here is the question. I just built a new machine with the following specs:
Intel i7 2.66GHz process overclocked to 3.2GHz
12GB Memory
Nvidia 260 Overclocked video card.
When I export a video from Adobe Premier into Media Encoder, all 8 cores peg out at 100% and thus my CPU temp get hot really quick (78 - 80 degrees Celsius)
Now if I take the same original video file and just drag it into Media Encoder, my 8 cores only show about 24-40% usage and the temp only gets to around 55-60 degrees Celsius.
What is causing such a big difference in CPU usage? I'm afraid to use Adobe Premier as it causes the CPUs to max out everytime. I want to edit my videos, but as stuck with just using AME on the original files.I suspect its simply because in the first case Pr and AME are both running. In the later, just ame loading the Pr project. In the forst case two projects are running simultaneously, the one in Pr and a temp copy in AME.
But more troublesome to me is why youve built a system that cant be maxed out. IN editing, we Want the CPUs to peg to process as fast as possible. IMHO; You should re-think the design of your workstation if it overheats so easily.
Curt -
Some questions of Widgets and RAM usage:
a) when you close dashboard/widget RAM usage eventually drops to zero?
b) when you de-activate widgets, do they use any RAM even if you activate Dashboard?
c) anyone have experience with that 'turn widgets on at login' app? RAM usage?
THanks.Hello,
As far as I know and having recently been testing on my own machines, Widgets do seem to play a pretty big role in RAM usage.
Strangely enough, I've noticed it on my G5 the most (probably because I use it more), that when Widgets are off, everything seems qiute a bit more snappy...apps launch MUCH faster, and actions take less time.
I really like Widgets for the most part, but there seem to be memory leaks the longer they're enabled, and the longer the machine is up and running.
Relaunching the dock seems to work SOME of the time...restarting seems to always work.
You can view what's going on in the Activity Monitor, located in your Utilities folder.
You can disable Widgets by this method in the Terminal:
To turn Dashboard off:
defaults write com.apple.dashboard mcx-disabled -boolean YES
To turn Dashboard on:
defaults write com.apple.dashboard mcx-disabled -boolean NO
You have to restart the Dock after making either change for it to take effect:
killall Dock
or Onyx has this ability.
After doing this I would suggest a restart just to make sure.
After doing so, launch Activity Monitor to see your free RAM.
Hope this was helpful.
G5 Dual 2.0 2 GHZ, 2 GB RAM, G4 Dual 450, iBook Graphite SE Mac OS X (10.4.5) -
Hi Experts,
I know report generation in ALV by using Functions modules and By using Objects. So my doubt is What kind of situations will demand to use 'Functions modules' and 'Objects procedure'.Hi Chinna,
In most cases, ABAP Objects is the better choice.
Once you are used to this OOPs concepts, you are advised to use the Procedural ABAP only when required and when there is no other alternative to use it.
I'm sure you are aware of the Principles of OOPs.
You should be able to judge which one to use!
To be honest, I'm not using ABAP Objects in my project. But, going forward I would certainly make it a habit to use it.
As we are stepping into the ESA world, OOPs is the only WAY!
Regards,
Arun -
Final Cut Server Usage Question...
I have just started researching this product and confused a little about it. I am the IT dept at a small advertising agency that does quite bit of video work.
Mostly all of the workstation in the office are PowerMac G5's that clock in at dual 2.2GHz or above with 4GB of RAM
We also have an Xserve G5 (Dual) with 4GB of RAM a 2GB fibre card installed and an apple RAID system as well. The office is all wired with 10/100.
With final cut server - will they be able to actullay edit video over the network on the RAID through the Xserve. Is that what this software is for? Sorry for such a lame question. If not is this basically like Adobe's Bridge application?
Let me know.Yes it does do basically what your saying, You can leave the source media on the server and just edit from your local machine. You can also download proxies (lower res version of the source media) and edit on a laptop or with a PC without having to move the large source files.
I cant imagine any reason why any company or small business using more than one editing machine wouldn't go for this solution
Does that answer your question? -
Sleep usage question - not problem
Sleep seems to work differntly on my new iMac compared to my old G4 FP iMac.
Question - are these observations below normal?
1. When I used to put my G4 to sleep (by clicking apple/sleep), my G4 would seem to more completely sleep. Even my external Lacie firewire drive wuold turn off its light and shut down. But with my intel iMac, the light on the external drive does not turn off.
2. It seems like the iMac fan is still running after putting it to sleep. When I check the next morning the iMac still seems warm/hot with the fan still running(though amost silently).
3. Also I notice that my G4 would provide the stobing light only when the computer was put to sleep, if the monitor alone was sleeping the strobing light would not flash, but with the intel iMac the strobing light will flash if the monitor has timed to sleep, but the computer has not.
4. I'd also note that I have the preference set to allow hard drive to sleep. And I do find that I can hear the hard drive starting up again (especially the firewire drive) after not using the drive for a while. Nevertheless, the firewire drive light is on all the time.
Thanks for any comments,
Tony554/3000
Hi Tony,
Yes, it seems the light (steady or pulsing) "tasks" have changed since the G4 iMacs.
See here:
- http://docs.info.apple.com/article.html?artnum=58016
So it may very well be different again with the new Core Duo iMacs?
Of course your computer is awake and works, if it's only the display sleeping.
Axl -
Hi all,
I m trying to print the content of an internal table as a alv grid , but i miss the F1 documentation of the field component:
I have the following code :
Types :
BEGIN OF ty_s_temp,
application TYPE char20,
component LIKE t512e-lgart,
END OF ty_s_inrichting,
DATA :
it_temp like table of ty_s_temp.
After defining the fieldcatalog .. i use the function
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_sort = gt_sort
i_save = 'X'
TABLES
t_outtab = it_temp.
Can someone tell me what i m doing wrong ?
regards,Hi Adel,
give the reference fieldname in the fieldcatalog for that field and also roll name and checkout if it works
wa_fieldcat-rollname = 'LGART'.
wa_fieldcat-ref_fieldname = 'LGART'. -
I have very long rows in ALV output. Its more than 550 characters. I made line-size very high (1023) in the report, but it still splits the output row and puts in 2 rows when I run in BACKGROUND (ONLY). When I run in foreground it displays sinnle row.
Any suggestions please.
Thank you.If you add a line-size, it should be work also in the background
<i>... LINE-SIZE col
Effect
Creates a report with col columns per line.
If the LINE-SIZE specification is missing, the line length corresponds to the current screen width. The system field SY-LINSZ contains the current line size for generating lists. The maximum width of a list is 1023 characters. You should keep lists to the minimum possible size to improve useability and performance (recommendation: LINE-SIZE < 132). For very wide lists (LINE-SIZE > 255), you should consult the notes for using LINE-SIZE
greater than 255.
Notes
The specified LINE-SIZE must not appear in quotation marks.
If the you want the report list (i.e. the output) to be printable, do not define a LINE-SIZE with a value greater than 132 because most printers cannot handle wider lists. You cannot print lists wider than 255 characters at all using the standard print functions. To print the contents of the lists, you need to write a special print routine that arranges the data in shorter lines (for example, using the PRINT ON addition in the NEW-PAGE statement.
At the beginning of a new list level, you can set a fixed line width for the level using the ... LINE SIZE addition to the NEW-PAGE statement.
Example
REPORT ZREPNAME LINE-SIZE 132.</i> -
Hi,
I run BCALV_TREE_SIMPLE_DEMO in order to know how it is working but I have one question: if I want to download the list to excel, how do I add a button and the functionality to do this?
Thanks in advance,
CristianHi Cristian,
or, more specific (still missing some details),
add Dropdown Button to toolbar (for Download)
CALL METHOD lr_toolbar->add_button
EXPORTING
fcode = 'DOWNLOAD'
icon = icon_export
butn_type = cntb_btype_button
text = ''
quickinfo = 'Download file(s)'. "#EC NOTEXT
and somewhere else
CLASS lcl_toolbar_event_receiver IMPLEMENTATION
CLASS lcl_toolbar_event_receiver IMPLEMENTATION.
METHOD on_function_selected.
CASE fcode.
WHEN 'DOWNLOAD'. "#EC NOTEXT
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
BIN_FILESIZE =
filename = l_pcfile
FILETYPE = 'ASC'
APPEND = SPACE
WRITE_FIELD_SEPARATOR = SPACE
HEADER = '00'
TRUNC_TRAILING_BLANKS = SPACE
WRITE_LF = con_true
COL_SELECT = SPACE
COL_SELECT_MASK = SPACE
DAT_MODE = SPACE
confirm_overwrite = con_true
NO_AUTH_CHECK = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = SPACE
TRUNC_TRAILING_BLANKS_EOL = con_true
IMPORTING
filelength = l_tsize
CHANGING
data_tab = lt_string
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24
I think it's no use to post my full source here because it was very specific for my project. But I think at least you might get an idea from this and the tree example programs mentioned in this tread.
Happy coding!
Best regards,
Clemens Li
> Hi,
>
> I run BCALV_TREE_SIMPLE_DEMO in order to know how it
> is working but I have one question: if I want to
> download the list to excel, how do I add a button and
> the functionality to do this?
>
> Thanks in advance,
> Cristian -
Hi every body ,
My requirment is : i have a tabstrip and the no.of tabs in the tabstrip is dynamic. So in each tab i am creating table ui element and binding the single context only in each tab .I am using the same node on each tab . Now my requirment is i want use the ALV.
I am using single node in all tabs . I need to use 1 ALV component in all the tabs . So guide me how to change the ALV table in all the view container UI elements based on my tab number . All should be done in the run time dynamically only .
Thank in advance ,
vijayHi,
Is the context dynamic or static.
You can use the sginle ALV instance but you need to use the SET_DATA and give the node name.
When you create the tabstrip and add a tab to it dynamically then store this instance. Based on this tabstrip intances
use the GET_TABS of cl_wd_tabstrip class and use the SET_DATA method based on the tabs you got.
Regards,
Lekha. -
The usage question of inputComboboxListOfValues
1.Can I disable the popup search on inputComboboxListOfValues ?
2.I set the items attribute according to Tag reference,but it seems not work.
I add items="#{backingBeanScope.backing_LOVSuggestion.allItems}" the List contains javax.faces.model.SelectItem ,But Jdev said the items attribute is deprecated,so that means I can't use it,I must implement the inputOfValuesModel? I study the adf demo, it seems a little complex,I only need a suggestion hints and construct the list from managed bean,and not need the popup search.
3.each time I click the combox down arrow,I find the backing bean construction method is called, I bind the combox to the backing bean's attribute. I think the construction method will only be called once during the page construction,but it not.What the lifecycle is it ? or my configuration is wrong ?ey finally I've succeded into lauching something from
a telnet session. Now my question is, how to make it
run permanently, even if I leave my telnet session ?Assuming the server is UNIX, "nohup java Foo &" will do the job.
"nohup" tells the system not to shut it down when you exit.
The "&" tells the system to put the program into the background.
Bhav -
The new Yosemite Photos app local storage usage question
Hi,
Did anyone check the local storage usage for the new Photos on Yosemite?
How much space does it take for all the lores photos locally if the originals are stored in iCloud.
Lets say if 100GB of RAW files are migrated from Aperture in to Photos to cloud. This should be 100GB in the cloud and how much on OS X?
Can a RAW file still be downloaded from cloud later or are they transformed to jpgs once uploaded?
What if there is not enough storage for all lores photos on iOS or OS X representing all the original iCloud photos?
I'm really puzzled about this.
ThanksI just installed the Yosemite upgrade with Photos. I don't use Aperture of the iCloud, but the iPhotos library migrated with about the same disk space, but it is doubled, because the old iPhoto library is still on disk.
Maybe you are looking for
-
No space left in shared memory error when executing a query
Hi, When I executed a query, it showed the results. But when I drilled down it by material, it showed the following error message. Error An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occured Error No space left in shared memory Is there an
-
Hi, My wife has been having issues with both her Macbook and iPhone recently with connecting to our Wifi network. Both devices can see the network, and just won't connect? Then randomly will connect.......if you are lucky? I have deleted the wifi
-
Incrementing a value of a variable in insert
Hi, I have an insert statement like Insert into table1(column1,column2) (select 1, value2 from table2); Is there a way without using the sequence that we can increment the "1" and insert in the table1 For eh Lets say table2 is Table2 Value2 Books Gla
-
Pressing cntrl+left mouse click doesn't select multiple rows.
Hi, I've got this problem after i migrated my form from 6i to 10g. In 6i version, cntrl+left mouse click used to work in order to select multiple rows on the screen. But, it's not working in 10g. Instead, Shit + left mouse click is working to select
-
[BUG] Jumbo frames issues after suspend/resume
I have a 2.66Ghz MacBookPro5,1 which I recently upgraded to Snow Leopard. It's connected to a gigabit LAN and makes use of jumbo frames (MTU 9000). Everything was working flawlessly under Leopard, but since the upgrade to 10.6, I've noticed some very