ALV Variant chosen in grid
Hi.
I have to following issue.
I have a program that through the use of additional buttons I added to my ALV grid can jump between different ALV grids.
The problem I'm having is that when you change the variant for ALV grid1 while viewing it and than change to grid 2, when you go back to grid1 the selected variant isn't used anymore.
So what I need is a way see check which variant is active when I get to the USER_COMMAND function of the ALV grid.
If someone has the answer to this I'd be very happy.
Regards,
Arthur
A. Parisius,
Do the following step so that you cant loose variant u set when u come to primary alv from secondary ALV.
1.
When you export I_SAVE = 'X' or 'A' through REUSE_ALV_GEID_DISPLAY, you can save variant on ALV output.you can save different variants for one output.
2.
Define one parameter to select variant on selection-screen itself instead of selecting on Output.
parameters :p_layout like disvariant-variant.
3.
F4 help to get variants set for the report.
at selection-screen on value-request for p_layout.
perform get_variant.
subroutine code and define w_variant structure type disvariant.
*& Form get_variant
form get_variant.
data: lw_variant type disvariant,
l_exit type char1.
lw_variant-report = sy-repid.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = lw_variant
i_save = 'A'
importing
e_exit = l_exit
es_variant = lw_variant
exceptions
not_found = 2.
if sy-subrc = 2.
message id sy-msgid type 'S' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if l_exit eq space.
p_layout = lw_variant-variant.
if not p_layout is initial.
perform get_w_variant.
endif.
endif.
endif.
endform. " get_variant
*& Form get_w_variant
form get_w_variant.
w_variant-report = sy-repid.
w_variant-handle = space.
w_variant-log_group = space.
w_variant-username = space.
w_variant-variant = p_layout.
w_variant-text = space.
w_variant-dependvars = space.
endform. " get_w_variant
4.
Pass w_variant structure through REUSE_ALV_GRID_DISPLAY FM .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZVENKAT_TEST1' "Program name
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = i_field
IT_SORT = i_sort
I_SAVE = 'X'
IS_VARIANT = w_variant "If you pass variant selected on selection-screen
"on F4 help,corresponding output is displayed
TABLES
T_OUTTAB = <i_tab>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
5.
If you select variant and pass through FM it will be remained when u come back from secondary ALV..
I hope that it helps u .
Regards,
Venkat.O
Similar Messages
-
How to find number of columns used in a ALV variant
I need to know how many column is active ( will be shown in the ALV report ) related to a specific ALV Variant.
Example :
The structure of my internal table has 147 columns.
The user in a specific ALV variant has chosen 25 columns of those 147 colums, so I need to know that this ALV variant will show 25 columns.
Thanks! JoHi Max,
Thanks for hints.
Finnally I did the verification at the beginning of my process.
Because I need the information before getting the data, so I called the METHOD with a "dummy" table,
and I received the info of what I need, the number of column related to a specific ALV Variant.
I used :
ls_variant-report = sy-repid.
ls_variant-variant = p_alvvar. "<<< Select-option field for AVL Variant
ls_variant-log_group = 'L01'.
CALL METHOD lo_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'MY_STRUCTURE'
is_variant = ls_variant
is_layout = ls_layout
i_save = 'A'
i_default = 'X'
I_BYPASSING_BUFFER = 'X'
CHANGING
it_fieldcatalog = LT_FIELDCATALOG
it_outtab = lt_dummy[].
CALL METHOD lo_grid1->GET_FRONTEND_FIELDCATALOG
IMPORTING
ET_FIELDCATALOG = LT_FIELDCATALOG.
loop at LT_FIELDCATALOG into ls_FIELDCATALOG where no_out = space.
add 1 to LV_NB_COLUMNS.
endloop.
Jo -
Apply ALV variant before export file in background task
Hi all,
I'm working on an ALV report.
As my report should deal with a great amount of data, it's sometimes running in background.
Users want the result to be sent by mail (in .CSV format so that they can use it in excel).
For now, the sending is OK but the file contains all fields of the internal table (no specific filter, no sort...).
How can i apply ALV variant (i.e keeping some of the fields, filter the list an so on) to the internal table before i build the file ?
ThanksSalut Jérôme,
un vieux (très vieux) code que j'avais fait.
le but était d'envoyer par email le résultat d'un ALV grid.
il t'en manque une partie, mais le principal est dedans
* Procédure P_GEN_HTML. *
* Génération d'un email en HTML. *
form p_gen_html.
data : struct_zgre000_s2 type zgre000_s2 ,
v_es_layout type lvc_s_layo ,
v_e_var_save(1) ,
v_e_var_def(1) ,
m_calculate_totals(1) value 'X' ,
itab_mt_data type lvc_t_data ,
itab_mt_info type lvc_t_info ,
itab_mt_sort type lvc_t_sort ,
itab_mt_filter type lvc_t_filt ,
itab_mt_filter_i type lvc_t_fidx ,
itab_html type swl_html_t ,
m_cl_variant type ref to cl_alv_variant ,
mt_outtab type ref to data ,
object_hd_change like sood1 occurs 0 with header line,
objpara like selc occurs 0 with header line,
receivers like zbc_receivers occurs 0 with header line ,
ms_total_options type lvc_s_toto,
mt_grouplevels_filter type lvc_t_grpl ,
m_sumlevel type i ,
itab_lt_grouplevels type kkblo_t_grouplevels ,
itab_lt_sort type kkblo_t_sortinfo.
field-symbols: <lt_ct00> type standard table,
<lt_ct01> type standard table,
<lt_ct02> type standard table,
<lt_ct03> type standard table,
<lt_ct04> type standard table,
<lt_ct05> type standard table,
<lt_ct06> type standard table,
<lt_ct07> type standard table,
<lt_ct08> type standard table,
<lt_ct09> type standard table.
* Ref the field-symbols.
data mt_ct00 type ref to data .
data mt_ct01 type ref to data .
data mt_ct02 type ref to data .
data mt_ct03 type ref to data .
data mt_ct04 type ref to data .
data mt_ct05 type ref to data .
data mt_ct06 type ref to data .
data mt_ct07 type ref to data .
data mt_ct08 type ref to data .
data mt_ct09 type ref to data .
v_gjahr1 = p_gjahr + 1.
v_gjahr2 = p_gjahr + 2.
v_gjahr3 = p_gjahr + 3.
* Alimente la table ITAB_ZGRE000_S2.
loop at itab_otp_grid.
move : itab_otp_grid-astnr to struct_zgre000_s2-zdemandeur ,
itab_otp_grid-astna to struct_zgre000_s2-zdemandeurt ,
itab_otp_grid-pspn to struct_zgre000_s2-zprojet ,
itab_otp_grid-pspn2 to struct_zgre000_s2-zotp ,
itab_otp_grid-post1 to struct_zgre000_s2-zdesotp ,
itab_otp_grid-pspnr to struct_zgre000_s2-zotp2 ,
itab_otp_grid-stat to struct_zgre000_s2-zstatut ,
itab_otp_grid-usr02 to struct_zgre000_s2-zoneutil ,
itab_otp_grid-budgt to struct_zgre000_s2-zbudgettotal ,
itab_otp_grid-engag to struct_zgre000_s2-zengagtotal ,
itab_otp_grid-dispo to struct_zgre000_s2-zdispototal ,
itab_otp_grid-depen to struct_zgre000_s2-zdepentotal ,
itab_otp_grid-budgn to struct_zgre000_s2-zbudget ,
itab_otp_grid-le to struct_zgre000_s2-zlatest ,
itab_otp_grid-depea to struct_zgre000_s2-zdepense ,
itab_otp_grid-pourc to struct_zgre000_s2-zpourcen ,
itab_otp_grid-budg1 to struct_zgre000_s2-zbudget1 ,
itab_otp_grid-budg2 to struct_zgre000_s2-zbudget2 ,
itab_otp_grid-budg3 to struct_zgre000_s2-zbudget3 ,
itab_otp_grid-natur to struct_zgre000_s2-znature.
append struct_zgre000_s2 to itab_zgre000_s2.
endloop.
refresh itab_fieldcatalog.
* Alimentation de la table ITAB_FIELDCATALOG.
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'ZGRE000_S2'
i_bypassing_buffer = ' '
i_buffer_active = ' '
changing
ct_fieldcat = itab_fieldcatalog.
* Les modifications des colonnes.
loop at itab_fieldcatalog into tmp_fieldcatalog.
case tmp_fieldcatalog-fieldname.
when 'ZDEMANDEUR'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'Demandeur' to tmp_fieldcatalog-scrtext_s ,
'Demandeur' to tmp_fieldcatalog-scrtext_m ,
'Demandeur' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'10' to tmp_fieldcatalog-outputlen .
when 'ZDEMANDEURT'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'Demandeur' to tmp_fieldcatalog-scrtext_s ,
'Demandeur' to tmp_fieldcatalog-scrtext_m ,
'Demandeur' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'30' to tmp_fieldcatalog-outputlen .
when 'ZPROJET'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'Projet' to tmp_fieldcatalog-scrtext_s ,
'Projet' to tmp_fieldcatalog-scrtext_m ,
'Projet' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'10' to tmp_fieldcatalog-outputlen .
when 'ZOTP'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'OTP' to tmp_fieldcatalog-scrtext_s ,
'OTP' to tmp_fieldcatalog-scrtext_m ,
'OTP' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
when 'ZDESOTP'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'Libellé OTP' to tmp_fieldcatalog-scrtext_s ,
'Libellé OTP' to tmp_fieldcatalog-scrtext_m ,
'Libellé OTP' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
when 'ZOTP2'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'OTP niveau 2' to tmp_fieldcatalog-scrtext_s ,
'OTP niveau 2' to tmp_fieldcatalog-scrtext_m ,
'OTP niveau 2' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
when 'ZSTATUT'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'Statut' to tmp_fieldcatalog-scrtext_s ,
'Statut' to tmp_fieldcatalog-scrtext_m ,
'Statut' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'10' to tmp_fieldcatalog-outputlen .
when 'ZONEUTIL'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'Zone util' to tmp_fieldcatalog-scrtext_s ,
'Zone util' to tmp_fieldcatalog-scrtext_m ,
'Zone util' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'10' to tmp_fieldcatalog-outputlen .
when 'ZNATURE'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'Nature' to tmp_fieldcatalog-scrtext_s ,
'Nature' to tmp_fieldcatalog-scrtext_m ,
'Nature' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'10' to tmp_fieldcatalog-outputlen .
when 'ZBUDGETTOTAL'.
move : 'X' to tmp_fieldcatalog-do_sum ,
'Bud. total' to tmp_fieldcatalog-scrtext_s ,
'Budget total' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
when 'ZENGAGTOTAL'.
move : 'X' to tmp_fieldcatalog-do_sum ,
'Eng. total' to tmp_fieldcatalog-scrtext_s ,
'Engagement total' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
when 'ZDISPOTOTAL'.
move : 'X' to tmp_fieldcatalog-do_sum ,
'Disp total' to tmp_fieldcatalog-scrtext_s ,
'Disponible total' to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
when 'ZDEPENTOTAL'.
move : 'X' to tmp_fieldcatalog-do_sum ,
'Dep. total' to tmp_fieldcatalog-scrtext_s ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
concatenate 'Depenses totales'
p_perio
p_gjahr
into tmp_fieldcatalog-scrtext_l.
when 'ZBUDGET'.
move : 'X' to tmp_fieldcatalog-do_sum ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
concatenate 'Bud '
p_gjahr
into tmp_fieldcatalog-scrtext_s
separated by ' '.
concatenate 'Budget Exercice:'
p_gjahr
'Version:'
p_vers1
into tmp_fieldcatalog-scrtext_l
separated by ' '.
when 'ZLATEST'.
move : 'X' to tmp_fieldcatalog-do_sum ,
'Latest' to tmp_fieldcatalog-scrtext_s ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
concatenate 'Latest Exercice:'
p_gjahr
'Version:'
p_vers2
into tmp_fieldcatalog-scrtext_l
separated by ' '.
when 'ZDEPENSE'.
move : 'X' to tmp_fieldcatalog-do_sum ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
concatenate 'Dep'
p_gjahr
into tmp_fieldcatalog-scrtext_s
separated by ' '.
concatenate 'Depense Exercice:'
p_gjahr
into tmp_fieldcatalog-scrtext_l
separated by ' '.
when 'ZPOURCEN'.
move : ' ' to tmp_fieldcatalog-do_sum ,
'% Dep/LE' to tmp_fieldcatalog-scrtext_s ,
'Pourcentage dépense VS LE'
to tmp_fieldcatalog-scrtext_l ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
when 'ZBUDGET1'.
move : 'X' to tmp_fieldcatalog-do_sum ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
concatenate 'Bud'
v_gjahr1
into tmp_fieldcatalog-scrtext_s
separated by ' '.
concatenate 'Budget Exercice:'
v_gjahr1
into tmp_fieldcatalog-scrtext_l
separated by ' '.
when 'ZBUDGET2'.
move : 'X' to tmp_fieldcatalog-do_sum ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
concatenate 'Bud'
v_gjahr2
into tmp_fieldcatalog-scrtext_s
separated by ' '.
concatenate 'Budget Exercice:'
v_gjahr2
into tmp_fieldcatalog-scrtext_l
separated by ' '.
when 'ZBUDGET3'.
move : 'X' to tmp_fieldcatalog-do_sum ,
v_zero to tmp_fieldcatalog-no_zero ,
'20' to tmp_fieldcatalog-outputlen .
concatenate 'Bud'
v_gjahr3
into tmp_fieldcatalog-scrtext_s
separated by ' '.
concatenate 'Budget Exercice:'
v_gjahr3
into tmp_fieldcatalog-scrtext_l
separated by ' '.
endcase.
move 'X' to tmp_fieldcatalog-tech_comp.
modify itab_fieldcatalog from tmp_fieldcatalog.
endloop.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME =
'\RNEMS0025BU_girodf1$Desktopit_field.txt'
FILETYPE = 'DAT'
tables
data_tab = itab_fieldcatalog.
data : begin of it_tmp_data occurs 1000 ,
buff(136) ,
zbudgetttotal(20) ,
zengagtotal(20) ,
zdispottotal(20) ,
zdepentotal(20) ,
zbudget(20) ,
zlatest(20) ,
zdepense(20) ,
zpourcen(20) ,
zbudget1(20) ,
zbudget2(20) ,
zbudget3(20) ,
waers(5) ,
end of it_tmp_data.
break girodf1.
loop at itab_zgre000_s2 into struct_zgre000_s2.
move struct_zgre000_s2+0(136) to it_tmp_data-buff .
move-corresponding struct_zgre000_s2 to it_tmp_data.
append it_tmp_data.
endloop.
call function 'DOWNLOAD'
EXPORTING
* BIN_FILESIZE = ' '
* CODEPAGE = ' '
FILENAME =
'\RNEMS0025BU_girodf1$Desktopit_data.txt'
FILETYPE = 'DAT'
* ITEM = ' '
* MODE = ' '
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* FILEMASK_MASK = ' '
* FILEMASK_TEXT = ' '
* FILETYPE_NO_CHANGE = ' '
* FILEMASK_ALL = ' '
* FILETYPE_NO_SHOW = ' '
SILENT = 'S'
* COL_SELECT = ' '
* COL_SELECTMASK = ' '
* NO_AUTH_CHECK = ' '
* IMPORTING
* ACT_FILENAME =
* ACT_FILETYPE =
* FILESIZE =
* CANCEL =
tables
data_tab = it_tmp_data.
* call function 'DOWNLOAD'
* EXPORTING
* FILENAME =
*'\RNEMS0025BU_girodf1$Desktopit_data.txt'
* FILETYPE = 'ASC'
* tables
* data_tab = itab_zgre000_s2.
* Complete.
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'ZGRE000_S2'
i_bypassing_buffer = ' '
i_buffer_active = ' '
changing
ct_fieldcat = itab_fieldcatalog.
call function 'LVC_FIELDCAT_COMPLETE'
EXPORTING
* I_COMPLETE =
IS_LAYOUT = v_es_layout
I_REFRESH_BUFFER = ''
I_BUFFER_ACTIVE = ''
* IMPORTING
* E_EDIT =
changing
ct_fieldcat = itab_fieldcatalog.
call function 'LVC_SORT_COMPLETE'
exporting
it_fieldcat = itab_fieldcatalog
changing
ct_sort = itab_mt_sort.
call function 'ALV_DATA_EXPORT'
exporting
i_report = ''
IT_FIELDCAT = itab_fieldcatalog
tables
it_data = itab_zgre000_s2.
* Recherche de la variante d'affichage.
move : sy-repid to struct_variant-report ,
sy-uname to struct_variant-username ,
'2' to struct_variant-handle.
if p_vgrid ne space.
move p_vgrid to struct_variant-variant.
endif.
* Ne pas demander d'explication, merci :)
get reference of itab_zgre000_s2 into mt_outtab.
* Créé l'objet variant.
create object m_cl_variant
exporting
it_outtab = mt_outtab
it_fieldcatalog = itab_fieldcatalog
it_sort = itab_mt_sort
it_filter = itab_mt_filter
is_variant = struct_variant
is_layout = v_es_layout
i_variant_save = v_e_var_save
i_variant_default = v_e_var_def.
move : 'A' to v_e_var_save ,
'X' to v_e_var_def .
call method m_cl_variant->set_values
exporting it_outtab = mt_outtab
it_fieldcatalog = itab_fieldcatalog
it_sort = itab_mt_sort
it_filter = itab_mt_filter
is_variant = struct_variant
is_layout = v_es_layout
i_variant_save = v_e_var_save
i_variant_default = v_e_var_def.
loop at itab_fieldcatalog into tmp_fieldcatalog
where tabname ne space.
exit.
endloop.
* Recherche de la variante.
call method m_cl_variant->load_variant
exporting i_tabname = tmp_fieldcatalog-tabname
i_bypassing_buffer = 'X'
i_dialog = space.
create data mt_ct00 like itab_zgre000_s2.
create data mt_ct01 like itab_zgre000_s2.
create data mt_ct02 like itab_zgre000_s2.
create data mt_ct03 like itab_zgre000_s2.
create data mt_ct04 like itab_zgre000_s2.
create data mt_ct05 like itab_zgre000_s2.
create data mt_ct06 like itab_zgre000_s2.
create data mt_ct07 like itab_zgre000_s2.
create data mt_ct08 like itab_zgre000_s2.
create data mt_ct09 like itab_zgre000_s2.
assign mt_ct00->* to <lt_ct00>.
assign mt_ct01->* to <lt_ct01>.
assign mt_ct02->* to <lt_ct02>.
assign mt_ct03->* to <lt_ct03>.
assign mt_ct04->* to <lt_ct04>.
assign mt_ct05->* to <lt_ct05>.
assign mt_ct06->* to <lt_ct06>.
assign mt_ct07->* to <lt_ct07>.
assign mt_ct08->* to <lt_ct08>.
assign mt_ct09->* to <lt_ct09>.
* Recherche des valeurs à partir de la variante sélectionnée.
call method m_cl_variant->get_values
importing es_variant = struct_variant
et_fieldcatalog = itab_fieldcatalog
et_sort = itab_mt_sort
et_filter = itab_mt_filter
es_layout = v_es_layout
et_grouplevels_filter = mt_grouplevels_filter
e_variant_save = v_e_var_save
e_variant_default = v_e_var_def.
call function 'LVC_SORT_APPLY'
exporting
it_sort = itab_mt_sort
* I_AS_TEXT = 'X'
* I_STABLE = 'X'
tables
ct_data = itab_zgre000_s2.
call function 'LVC_TRANSFER_TO_KKBLO'
exporting
it_sort_lvc = itab_mt_sort
it_grouplevels_lvc = mt_grouplevels_filter
importing
et_sort_kkblo = itab_lt_sort
et_grouplevels_kkblo = itab_lt_grouplevels
exceptions
it_data_missing = 1
it_fieldcat_lvc_missing = 2
others = 3.
call function 'ALV_GROUPLEVELS_GET'
exporting
i_subtotals_only = 'X'
it_sort = itab_lt_sort
i_subtract_counter = 'X'
importing
et_groups = itab_lt_grouplevels
tables
t_outtab = itab_zgre000_s2.
call function 'LVC_TRANSFER_FROM_KKBLO'
exporting
it_grouplevels_kkblo = itab_lt_grouplevels
importing
et_grouplevels_lvc = mt_grouplevels_filter
exceptions
it_data_missing = 1
others = 2.
* Recupération des totaux.
call function 'LVC_TOTALS_GET'
exporting
it_sort = itab_mt_sort
is_layout = v_es_layout
it_filter_index = itab_mt_filter_i
tables
it_data = itab_zgre000_s2
et_collect00 = <lt_ct00>
et_collect01 = <lt_ct01>
et_collect02 = <lt_ct02>
et_collect03 = <lt_ct03>
et_collect04 = <lt_ct04>
et_collect05 = <lt_ct05>
et_collect06 = <lt_ct06>
et_collect07 = <lt_ct07>
et_collect08 = <lt_ct08>
et_collect09 = <lt_ct09>
changing
cs_total_options = ms_total_options
* ct_fieldcat = mt_fieldcatalog
ct_fieldcat = itab_fieldcatalog
ct_grouplevels = mt_grouplevels_filter
c_calculate_totals = m_calculate_totals
c_sumlevel = m_sumlevel .
* Converti dans un language comprehensible par SAP.
call function 'LVC_TABLE_FOR_DISPLAY'
exporting
it_fieldcat = itab_fieldcatalog
it_sort = itab_mt_sort
it_filter = itab_mt_filter
is_total_options = ms_total_options
is_layout = v_es_layout
importing
et_lvc_data = itab_mt_data
et_lvc_info = itab_mt_info
tables
it_data = itab_zgre000_s2
it_collect00 = <lt_ct00>
it_collect01 = <lt_ct01>
it_collect02 = <lt_ct02>
it_collect03 = <lt_ct03>
it_collect04 = <lt_ct04>
it_collect05 = <lt_ct05>
it_collect06 = <lt_ct06>
it_collect07 = <lt_ct07>
it_collect08 = <lt_ct08>
it_collect09 = <lt_ct09>
changing
ct_grouplevels = mt_grouplevels_filter
exceptions
fieldcat_not_complete = 1
others = 2.
if sy-subrc ne space.
write : /1 'Probleme de convertion.'.
stop.
endif.
* Convertie en HTML.
call function 'LVC_ALV_CONVERT_TO_HTML'
exporting
it_data = itab_mt_data
it_info = itab_mt_info
i_file_dialog = ' '
importing
et_html = itab_html.
* Envois par email.
move : 'HTM' to object_hd_change-file_ext ,
'Liste des commandes passées sur Immobilisation via PM'
to object_hd_change-objdes.
append object_hd_change.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME =
'\RNEMS0025BU_girodf1$Desktopmt_data.txt'
FILETYPE = 'DAT'
tables
data_tab = itab_mt_data.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME =
'\RNEMS0025BU_girodf1$Desktopmt_info.txt'
FILETYPE = 'DAT'
tables
data_tab = itab_mt_info.
data : it_var type table of disvariant with header line.
move-corresponding struct_variant to it_var.
append it_var.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME =
'\RNEMS0025BU_girodf1$Desktopit_var.txt'
FILETYPE = 'DAT'
tables
data_tab = it_var.
*stop.
* Liste des personnes à qui on envoye le email.
select bname
into receivers-uname
from usr02
where bname in s_uname.
append receivers.
endselect.
* Send mail.
call function 'Z_BC_ENVOI_EMAIL'
exporting
object_hd_change = object_hd_change
object_type = 'RAW'
owner = sy-uname
tables
objcont = itab_html
receivers = receivers
exceptions
others = 01.
endform. " P_GEN_HTML. -
Help needed on ALV variant with new GUI screen is created by set PF status
Hi Gurus,
I have created a new GUI screen for ALV grid display thru set pf-status, since i need two buttons on application toolbar.
have been passing parameters to alv_grid_display FM for display-*
i_save = 'A'
is_variant = gwa_variant
I have an ALV variant selection paramter on selection screen.
Please guide me with some pointers on how to implement ALV variant selection thru selection screen.
Many Thanks,
MadanHi,
Search default variant for the report
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = i_variant1
EXCEPTIONS
not_found = 2.
If default variant is found , use it as default.
Else , use the variant LAYOUT1.
IF sy-subrc = 0.
p_var = i_variant1-variant.
ELSE.
p_var = 'LAYOUT1'.
ENDIF.
endform. " SUB_VARIANT_INIT
*& Form SUB_CHECK_PVAR
Once the user has entered variant, check about its existence
FORM SUB_CHECK_PVAR.
If the name of the variable is not blank, check about its existence
if not p_var is initial.
clear i_variant.
i_variant-report = sy-repid.
i_variant-variant = p_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
I_SAVE = 'A'
CHANGING
CS_VARIANT = I_VARIANT.
If no such variant found , flash error message
if sy-subrc ne 0 .
message e398(00) with 'No such variant exists'.
else.
If variant exists , use the variant name to populate structure
I_VARIANT1 which will be used for export parameter : IS_VARIANT
in the function module : REUSE_ALV_GRID_DISPLAY
clear i_variant1.
move p_var to i_variant1-variant.
move sy-repid to i_variant1-report.
endif.
else.
clear i_variant.
endif.
ENDFORM. " SUB_CHECK_PVAR
*& Form SUB_VARIANT_F4
Display a list of various variants of the report when the
user presses F4 key in the variant field
form SUB_VARIANT_F4.
i_variant-report = sy-repid.
Utilising the name of the report , this function module will
search for a list of variants and will fetch the selected one into
the parameter field for variants
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
IS_VARIANT = I_VARIANT
I_SAVE = 'A'
I_DISPLAY_VIA_GRID = 'X'
IMPORTING
ES_VARIANT = I_VARIANT1
EXCEPTIONS
NOT_FOUND = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC = 0.
P_VAR = I_VARIANT1-VARIANT.
ENDIF.
endform. " SUB_VARIANT_F4
Thanks
Ashu -
ALV Variant Table and Hiding Variants
Hi
Where can I find the table where all ALV variants are stored?
I tried to run a Trace and it brought back LTCX table but there doesn't seem to be any entries in this table?
Also is there a way I can hide variants based on transaction code?check this LTDX,TVARV,VARIS and fm RS_VARIANT_CONTENTS
table VARID shows information about variant creation and date
VARIT shows the variant description and the language used -
Hi Guys.
I've a question. I've created a ALV variant in DEV and now I need transport it to QA.
Is it possible ?
regards.
Javier.Check this out.
http://help.sap.com/saphelp_sm32/helpdata/en/bd/839d37664e4d45e10000009b38f8cf/content.htm
All the way to the bottom on this link.
Regards,
RIch Heilman
Message was edited by:
Rich Heilman -
Hi All,
I have an ALV variant for Prog1. Now I want to copy and use the same variant for Prog2. (Prog2 is a copy of Prog1 with some small changes)
How can I do this?
Thanks & Regards,
SaurabhHi
Try to copy the hits of the table LTDX and change the name of the program
Max -
Switching between ALV variants
Hi Experts
Is there any way to switch between the variants of an ALV without using the std dropdown available in alv header.
I have a requirement to navigate to various views depending on the current ALV variant selected by the user in my application.
Thanks and Regards
KarthickHi Experts
Is there any way to switch between the variants of an ALV without using the std dropdown available in alv header.
I have a requirement to navigate to various views depending on the current ALV variant selected by the user in my application.
Thanks and Regards
Karthick -
Hi,
how can I let user to delete dislpay variant of alv grid.
Thank you.
MarianHi,
Path:
Settings - layout - layout management
You see the table of layouts
-> Edit - delete layout or button trash
Regards Andreas -
Need to know fields saved in a ALV variant
I have an ALV grid display.the users have ALV layout variants saved.
Is there someway in the program to identify what are all the columns that are part of the layout selected.. Probably there is a standard ALV standard FM or mathod that gives thisMaybe you can try this...<b>LVC_VARIANT_SAVE_LOAD</b>
Greetings,
Blag. -
ALV report for 5 Grids using Objects and Method
I have few questions in ALV 5Grids ,could you please correct me in the following program logic...
Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it is populating item details in Grid2 from VBAP,parallally populating the customer data in Grid5 from KNA1.
Now the pending issue is ,
if you click in the Grid2 then we should populate the shipping details in Grid3 and
if you click in the Grid3 then we should populate the billing details in Grid4.
Program Logic;
REPORT ZAREPAS20.
Tables : vbak,vbap,likp,lips,vbrk,vbrp,kna1.
DATA : OK_CODE LIKE SY-UCOMM,
G_CONTAINER TYPE SCRFNAME VALUE 'BCALV7_GRID_DEMO_0100_VASU',
DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
SPLITTER_1 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
SPLITTER_2 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
splitter_3 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
CELL_TOP1 TYPE REF TO CL_GUI_CONTAINER,
CELL_BOTTOM1 TYPE REF TO CL_GUI_CONTAINER,
CELL_TOP2 TYPE REF TO CL_GUI_CONTAINER,
CELL_BOTTOM2 TYPE REF TO CL_GUI_CONTAINER,
CELL_LEFT TYPE REF TO CL_GUI_CONTAINER,
CELL_middle TYPE REF TO CL_GUI_CONTAINER,
CELL_RIGHT TYPE REF TO CL_GUI_CONTAINER,
GRID1 TYPE REF TO CL_GUI_ALV_GRID,
GRID2 TYPE REF TO CL_GUI_ALV_GRID,
GRID3 TYPE REF TO CL_GUI_ALV_GRID,
GRID4 TYPE REF TO CL_GUI_ALV_GRID,
GRID5 TYPE REF TO CL_GUI_ALV_GRID.
DATA : GT_VBAK TYPE STANDARD TABLE OF VBAK,
GT_VBAP TYPE STANDARD TABLE OF VBAP,
GT_LIKP TYPE STANDARD TABLE OF likp,
GT_LIPS TYPE STANDARD TABLE OF lips,
GT_VBRK TYPE STANDARD TABLE OF vbrk,
GT_VBRP TYPE STANDARD TABLE OF vbrp,
GT_KNA1 TYPE STANDARD TABLE OF kna1.
DATA:begin of itab1 occurs 0,
vbeln type likp-VBELN,
erzet type likp-ERZET,
lfart type likp-LFART,
posnr type lips-POSNR,
END OF ITAB1.
DATA:begin of itab2 occurs 0,
vbeln like vbrk-vbeln,
posnr like vbrk-fktyp,
fkart like vbrk-fkart,
fklmg like vbrp-fklmg,
end of itab2.
*selection screen for selecting range of values
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options: S_vbeln for VBAK-vbeln.
selection-screen end of block b1.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender. " sending control, i.e. ALV grid that raised event
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD HANDLE_DOUBLE_CLICK.
*DEFINE LOCAL DATA.
DATA : itab_vbak type VBAK,
itab_vbap type VBAP,
itab_likp type likp,
itab_lips type lips,
itab_vbrk type vbrk,
itab_vbrp type vbrp,
itab_kna1 type kna1.
*DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
CASE SENDER.
WHEN GRID1.
READ TABLE gt_VBAK INTO itab_vbak INDEX e_row-index.
CHECK ( itab_vbak-vbeln IS NOT INITIAL ).
CALL METHOD GRID1->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID2.
READ TABLE gt_VBAP INTO itab_vbap INDEX e_row-index.
CHECK ( itab_vbap-vbeln IS NOT INITIAL ).
CALL METHOD GRID2->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID3.
READ TABLE gt_LIPS INTO itab_LIPS INDEX e_row-index.
CHECK ( itab_lips-vgbel IS NOT INITIAL ).
CALL METHOD GRID3->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DELIVERY_DETAILS' ).
WHEN GRID4.
READ TABLE gt_VBRP INTO itab_VBRP INDEX e_row-index.
CHECK ( itab_vbrp-vgbel IS NOT INITIAL ).
CALL METHOD GRID4->set_current_cell_via_id
EXPORTING
is_ROW_ID =
is_COLUMN_ID =
is_row_no = es_row_no.
Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'BILLING_DETAILS' ).
WHEN GRID5.
READ TABLE gt_KNA1 INTO itab_KNA1 INDEX e_row-index.
CHECK ( itab_kna1-kunnr IS NOT INITIAL ).
SET PARAMETER ID 'KUN' FIELD itab_KNA1-KUNNR.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
WHEN OTHERS.
RETURN.
ENDCASE.
endmethod.
endclass. "lcl_eventhandler IMPLEMENTATION
start-of-selection.
*write :/ 'FEDEX INT''''L' .
SELECT * FROM vbak INTO TABLE gt_VBAK
where vbeln IN S_VBELN.
creating docking container
create object docking
exporting
parent = cl_gui_container=>screen0
ratio = 90
exceptions
others = 6.
if sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create splitter container
CREATE OBJECT splitter_1
EXPORTING
parent = docking
rows = 1
columns = 3
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_left.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = cell_middle.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 3
RECEIVING
container = cell_right.
Create 2nd splitter container
CREATE OBJECT splitter_2
EXPORTING
parent = cell_left
rows = 2
columns = 1
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_2->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top1.
CALL METHOD splitter_2->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom1.
Create 3rd splitter container
CREATE OBJECT splitter_3
EXPORTING
parent = cell_middle
rows = 2
columns = 1
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_3->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top2.
CALL METHOD splitter_3->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom2.
Create ALV grids
CREATE OBJECT grid1
EXPORTING
i_parent = cell_top1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid2
EXPORTING
i_parent = cell_bottom1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid3
EXPORTING
i_parent = cell_top2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid4
EXPORTING
i_parent = cell_bottom2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid5
EXPORTING
i_parent = cell_right
EXCEPTIONS
OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
Display data
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAK'
CHANGING
it_outtab = gt_VBAK
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbap.
CALL METHOD grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAP'
CHANGING
it_outtab = gt_VBAP " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_LIPS.
CALL METHOD grid3->set_table_for_first_display
EXPORTING
i_structure_name = 'LIPS'
CHANGING
it_outtab = gt_LIPS " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_VBRP.
CALL METHOD grid4->set_table_for_first_display
EXPORTING
i_structure_name = 'VBRP'
CHANGING
it_outtab = gt_VBRP " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_KNA1.
CALL METHOD grid5->set_table_for_first_display
EXPORTING
i_structure_name = 'KNA1'
CHANGING
it_outtab = gt_KNA1 " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Link the docking container to the target dynpro
CALL METHOD docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
*PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
end-of-selection.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
SET TITLEBAR 'xxx'.
Refresh display of detail ALV list
CALL METHOD grid2->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid3->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid4->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid5->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR
'EXIT' OR
'CANCEL'.
SET SCREEN 0.LEAVE SCREEN.
USER HAS PUSHED BUTTON "DISPLAY OREDERS"
WHEN 'ORDER_DETAILS'.
PERFORM ORDER_SHOW_DETAILS.
when 'DELIVERY_DETAILS'.
PERFORM DELIVERY_SHOW_DETAILS.
WHEN 'BILLING_DETAILS'.
PERFORM BILLING_SHOW_DETAILS.
WHEN OTHERS.
ENDCASE.
CLEAR : OK_CODE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ORDER_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM order_show_details .
define local data
DATA:
ld_row TYPE i,
itab_VBAK TYPE VBAK.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_VBAK INTO itab_VBAK INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM KNA1 INTO TABLE gt_KNA1
WHERE KUNNR = itab_VBAK-KUNNR.
SELECT * FROM VBAP INTO TABLE gt_VBAP
WHERE VBELN = ITAB_VBAK-VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " ORDER_SHOW_DETAILS
*& Form DELIVERY_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM DELIVERY_SHOW_DETAILS .
define local data
DATA:
ld_row TYPE i,
itab_VBAP TYPE VBAP.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_VBAP INTO itab_VBAP INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT LIKPVBELN LIKPERZET LIKPLFART LIPSVBELN
INTO CORRESPONDING FIELDS OF TABLE ITAB1
FROM ( LIKP INNER JOIN LIPS ON LIKPVBELN = LIPSVBELN )
WHERE LIKP~VBELN IN S_VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " DELIVERY_SHOW_DETAILS
*& Form BILLING_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM BILLING_SHOW_DETAILS .
define local data
DATA:
ld_row TYPE i,
itab_LIPS TYPE LIPS.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_LIPS INTO itab_LIPS INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT VBRKVBELN VBRKFKTYP VBRKFKART VBRPFKLMG
INTO CORRESPONDING FIELDS OF TABLE ITAB2
FROM ( VBRK INNER JOIN VBRP ON VBRKVBELN = VBRPVBELN )
WHERE VBRK~VBELN IN S_VBELN.
ENDFORM. " BILLING_SHOW_DETAILSHi,
ALV means ABAP List Viewer. Most convenient way to use it is through reuse library (cf.
transaction se83) available from release 4.6 of SAP R/3.
ALV is available in two modes: list and grid. List mode is good old list processing with
standard functionnalities, and grid mode is using a new OCX object displaying grids.
Classical reports needs more coding to set the horizontal and vertical lines.we need to adjust
the lines manually.Even interactive also takes lot of code.
ALV reports reduces the code when compared to classical reports.we use function modules to
generate the output.
that r REUSE_ALV_LIST_DISPLAY,REUSE_ALV_GRID_DISPLAY,REUSE_ALV_HIERSEQ_LIST_DISPLAY etc..
the following threads will give some examples of the functions which you are expecting
Header
regarding function module
hide ALV field
Simply Display selection parameter values in the ALV OUTPUT
Drag and drop in a report
https://www.sdn.sap
Reprots
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you
use - ABAP Objects calls or simple function modules. -
Hi guru,
as I know abt variat that, if I want to save the selection screen fied value..we can save as a variant and after saving we see a button on the app.toolbar and when ever required click on that button...it will fill the same value in the selection screen field.
But there is some function modules I know..we use in the ALV for the variant. What is the use of those function modules. Saving selection screen field value as a variant is not working in the alv report. Is it so? Plz clarify my doubt ..In ALV, we use the variant for saving the o/p layout for different inputs.
We can use the foll function modules..
Reuse_alv_variant_f4
Reuse_alv_variant_existence
Reuse_alv_variant-save,
Reuse_alv_variant_get
W can save the variant and we call the o/p with this variant nale instead of giving the input values...
Reward Points if useful.. -
Directly creation of ALV Variant in Production - Whether possible
Hi Friends,
I have a requirement to display few more fields for the standard dunning report . The server version is 4.6C .
All the required fields are available in field catalogue. I have to create a new variant to access the new fields also.
I am totally new to ALV Programs related activities.
My question is -
Can I create the variant directly in Production , or I have to create the variant in Dev and move to TST and Production.
Please advice.
Thanks in advance,
Vengal Rao.Hello Vengal,
Check this thread: ALV layout name for details.
BR,
Suhas -
Printing page numbers in an ALV report with multiple grids
Hi,
I have developed a report using OO ALV GRID. The output is having multiple grids navigated using a menu button appended to the standard tool bar
(Ref report: BCALV_GRID_07). On navigation, we are able to display specific titles when each grid is displayed.
When we print those individual pages (the grids), we are able to print the page numbers and the title for the first grid but when we display the next grid and print, we are unable to initialise the page number
and print specific title. The page numbers continues from the last printing.
I am looking at identifying the grid when the print event - PRINT_TOP_OF_PAGE is triggered so that a grid specific title can be printed and also page number initialised.
Any suggestions is highly appreciated.
Thanks.
Mani.You cannot have one event for all the grids as you cannot identify for which grid the event has fired. You need to activate the event for each of the grid and handle the code independently.
regards,
Ravi
Note - Please mark the helpful answers -
Need to add checkbox in alv header Not in grid
Dear Guru's,
My question is i want to add checkbox on top of alv grid ie on top of page .
my requriement is for SD module- status of order -Mass Update.
suppose status checkbox on header is HFSC is checked ( check box),
for all the sales order which are showed on the alv grid must be updated with this status for which i am calling trasaction VA02 in program and doing changes but i am not able to create checkbox on header .
Again i have already used ALV without classesso please give me solution accordinglly . Thanks in advance.Hi,
For working with top of page we generally use SLIS_LISTHEADER right.
In this type the first field is
type - which can accept values as follows
H - Heading
S - Selection
A - Action
May be the options Selection or Action may help u.
Maybe you are looking for
-
Synching photos from TeraStation to Apple TV is not working - any ideas?
Hi, gosh, I hope someone can help me with this ... please my iTunes library runs on a Buffalo TeraStation Live (network attached storage). Synching and streaming movies, TV shows and music works fine. But as soon as I choose the photo folder on the T
-
So when i plug in my iPhone 5 (all fully up to date etc), my itunes says: "This iPhone cannot be used, because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64bit version of iTunes." Now I have al
-
More than one song in a slide show?
Hey, i was organizing a slide show on my new mac book pro and i was trying to put more than one song in my slide show. is this possible? i realize that u can loop the same song but that is pretty tacky for a slideshow if you ask me. plz help as soon
-
How to create default groups in Weblogic- Security Realms -- Groups
Hi Team, Unfortunately I have deleted some default groups from Weblogic->Security Realms --> Groups. How to add the groups. Regards, Ravi.
-
Can't retrieve back a podcasting
I have a question. I have been using itunes for downloading podcasts for quite some time now, and I have noticed the following thing happening: Whenever a podcasting starts to get downloaded, and I interrupt it for whatever reason, either it gets rem