Always bluish pictures on my collages!  LJB

For the last four weeks I have been plagued by all pictures turning bluish.
Friday last week I had a hopeful consultant on my phone +4798644373,
for about an hour, and he promised to call back in 2 hours, but he did not..
He was unwilling to give me INFO about how I could reach him.  But sadly
for me I am stuck with my problem.  But I wonder if you could track my case
no. 185203672, so I could solve the problem.  I wonder if the best is to have
a full upgrading of my Adobe Photoshop Elements 12 with the serial number
1057-1465-2781-3368-5296-1156?
                                        Professor Leif J. Braaten
                                        [email protected]

On my 800 MHz G3 iBook, often photos or graphics will be outlined with the pink lines you've described. Adjusting the display back or forward just a bit gets rid of them, but sometimes it takes quite a bit of fiddling to accomplish that.
I believe that it's the low-voltage data signal cable at fault, and the choices are to live with it or to send it in for repair.
DT & T Computer Services in Fremont, California have some of the best prices on repairs I've seen online. You may want to call them, tell them the symptoms you're seeing, ask if they agree with the diagnosis, ask if they do the LVDS cable repair and, if so, what they charge for it, since this particular repair is not on their price list.
I've decided to live with mine the way it is, and bought an iBook G4 on eBay a couple of months ago.

Similar Messages

  • I have Photoshop Eleent 12 and use a Windows PC.  I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card.  I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on

    I have Photoshop Eleent 12 and use a Windows PC.  I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card.  I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on "Import" and select "From camera or card reader".  Once on the Photo Downloader, I select the pictures, chose the folder and click on "Get Media" and all the photos get downloaded. Today I folled the same procedure as always, but ZI'm gettig an error message that reads"Import Failed" followed by another message that reads "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in this Catalog."  I'm puzzled by this message and don't know what to do o get my photos.  Any suggestions?

    The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

  • My Adobe Photoshop Elements 12 only prints bluish pictures

    I had a wonderful, effective consultant with my Adobe 12 problem in the morning Friday 21.2
    He then said he needed 1-2 hours to finish his work with me case number 1852 036 72, and
    promised to call me back.  That never happened, and he was unwilling to give me INFO about
    how I could reach him.  The problem with bluish pictures has ruined my work now
    for 2 weeks.  PLEASE HELP!

    You posted your question to a completely unrelated forum - try asking on the Photoshop Elements forum

  • How can I always open pictures in photoshop and NOT preview ?

    how can I always open pictures in photoshop and NOT preview ?

    If you are on Mac Salah’s first tip may need to have »click "Change All"« added to permanently affect files of the specific file format.

  • Why does IPhoto always crop pictures when printing?

    Whenever I print from iphoto the picture alway gets cropped automatically. Why does it do this and how can I stop it? This results in heads and feet often being cropped out of the printed photo which is frustrating. When I double click on a photo to view it full screen I can see the full photo however the actual print, regardless of print size chosen, ends up being cropped. I use an HP C7280 printer.

    Photos from a digital camera are in a size ratio of 4:3 which is not one of the standard print sizes. Therefore the photo must be cropped in order to fit the select print size. You should crop the photo yourself in iPhoto before printing so you get exactly what you want with no surprises.
    What iPhoto does is take the smaller dimension and scale it to fit that dimension in the print.  The larger dimension will obviously be larger than the print so it will be cropped to fit, usually on both ends.
    Bottom line: do the cropping yourself to get what you want.
    OT

  • How can I change my screen saver to one picture instead of collage

    I don't want the collage as my screen saver I just want one picture is there any way to change it

    Open System Preferences>Desktop & Screen Saver>Screen Saver and select the '+'.  Select 'Add folder of pictures...'.    Have your desired picture in that folder and select it.
    Ciao.

  • IMessage always revert picture change

    Hello
    I have been changing my picture on iMessage on my mac pro (late 2013), but for some reason, iMessage always revert it back to the previous image if I restart the laptop or the just send it to sleep.
    Does anyone have the same issue? This does not seem to be the case on my mac mini
    Thanks for the support
    Regards

        for the      Points.
    More Info on the process.
    When you set up a Mac User Account either at the Computer set up stage for the Admin account or Later in System Preferences > Users and Groups, you are asked to choose a pic  (from the Apple Defaults)
    The List in longer and scrollable.  It can also vary slightly depending on the Mac OS you are using.
    When you then set up the Address Card that becomes the My Card in the Contacts App the same pic is then drag through as first choice.
    In iChat  (and now Messages in any Buddy list account) this becomes the first choice default.
    The Linked selection tends to be the ones in those same places.
    If you have changed them you will have multiple pics (At least three).
    Recents also tends to show the ones in Use or have been in use in any of those places (up to the last 16 choices)
    However, as detailed above you can change any of then Individually  or have them the same by changing one.
    Here I have my Bonjour List in front of my System Preferences > Users and Groups > Account and the Contacts > My Card entry
    Users and Groups has a black and white side on shot, the Contacts app has coloured face on shot and the Buddy list has the pic I use here.
    8:59 pm      Saturday; August 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • If autologin is configured desktop background picture is always galaxy picture after restart.

    If auto login is configured,  the desktop background picture is always the standard picture galaxy after restart. If  i do an normal login the background is the right one. The which i have configured.

    I seem to have a slightly different variant of this problem. My desktop picture is supposed to select a random photo from a large folder, and change every hour. When I start up my MacBook Pro by itself, it works fine--I get a random picture. When I connect my external Samsung display and have mirroring turned on, it also works--I get one random picture on both screens.
    The problem shows up only when mirroring is turned off. I should presumably get two different random pictures. But instead I get the same two pictures every time--two different pictures, but always the same ones. After the first hour, I do get two random pictures--but at startup, I always see the same two. Removing the .plist file didn't help. I tried removing the original two recurring photos, and everything seemed fine for a couple of startups, but then it just got stuck on a different pair. A pretty inconsequential problem, all in all, but frustrating.

  • Iphoto has always imported pictures........not now.  Help please.

    Hello,
    I've always been able to import photos from my Canon Powershot SD500 into my iphoto 6. I installed Leopard about a month ago and imported photos successfully soon after.
    This morning I tried to upload photos from my camera to my G5 ( 3 1/2 years old ) and the import screen came up; I clicked on the import photos button on the lower left corner of the window and instantly it said "Stop Importing" and went back to the library window.
    Any and all help would be greatly appreciated!
    Much thanks in advance.

    You don't sync photos back to the Mac. It does not work that way. You import the photos into iPhoto or you can use Image Capture or other apps as well.
    iOS: Importing photos to your computer
    Then you can create an event or album in iPhoto and select that event or album to sync back to Mac the next time that you sync.
    I am just guessing that the original event is in the Photos app on the iPad (it was not deleted) and then you somehow selected the event to sync again in iTunes giving you two events of the same photos.
    You can select or deselect the events and albums that you want to sync in iTunes

  • DOES I PHOTO ALWAYS HIDE PICTURES IN THE SD CARD AFTER YOU IMPORT THEM?

    How do i do to make i photo NOT hide the pictures i've already imported from my SD card? i haven't erased them from the SD card, and i want to import them again to my external drive for space issues. BTW, how do i do this?
    i' got several issues with i photo. i HAVE to use it, cause throuh the finder i don't see all the pictures from the sd card. some of them just don't show up. has this happened to anyone else? so i have to use i photo to import my pictures from my sd card everytime. i used to be a pc user, but i pretty much know my way around my mac book pro.
    it's a retina, the smallest space one (256 gigas) and i take so many pictures (that's my job) it's almost full. i bought it knowing i would import all the pictures into an external hard drive, but didn't initially and now i don't know how to change the hard drive where the pictures are imported.
    plus the pictures i've already imported from my sd card keep on not showing in the sd card through i photo. i still have all the original pictures in several sd cards cause i wanna import the ones i've already imported since i bought my mac book pro into my mac book pro, this time into my external hard drive. but i'm afraid they will keep on not showing in the sd card through i photo when i do it.  i hope i'm making sense.
    can anyone help me? thanks,
    john.

    thank you Old Toad. i already tried this, and it doesn't work for me, cause for some reason the finder won't show all the pictures that i took. i photo shows them ALL. i don't particularly like this application (i'd rather use the finder as i used to with PC) but i think i have to use it because of this.
    Does anybody get my problem? has anybody else had this problem happen to them?
    is there any way i photo show again the pictures in the sd card that i've already imported?
    i just put the sd card in the sd slot in my mac book pro off course.
    thanks
    john

  • How do I get rid of bluish pictures from my Adobe .. 12 to printer HP photosmart 7520?

    My expert advises me to upgrade my Adobe 12 program, or install i anew!  Pleased help?  Professor Braaten

    Actually, "Other" can never go away.  It includes, among other things, the iOS itself.  The smallest it can get is roughly 1 gigabyte.
    "Other" includes deleted emails that are still residing in your trash, as well as actual email messages.
    You might have one or more corrupted apps on your machine.  Carefully consider which apps you restore once you perform the cleanup, or the "Other" will once again grow large.

  • How to make a christmas newsletter with pictures

    how do I make a christmas newsletter with pictures all around.  I want to arrange the pictures.  the collage does it but I want to place them.

    Click File >> Open and select all of your photos
    That will add them to the project bin
    Then select File >> New >> Blank File
    Select background color White (or whatever you prefer) and add your width and height for your final image (set resolution 72 for web usage or 240 to 300 for printing) then click OK
    In the project bin click your first photo and drag it up into the main window on top of your new background.
    Click on the move tool and click in the center of the photo and drag to arrange it where you want on the background - you can hold down the shift key to maintain original proportions whilst dragging the corner handles of the bounding box to get the size you want.
    Do the same with the next photo (drag it up into the main window) and use the move tool to position it. Then continue with each image.
    Finally Click Layer >>Flatten image and save as jpeg. (Save as PSD if you want to preserve the layers for editing again)
    N.B. as you add images they get dropped in the center. So you need to use the move tool to drag them apart. Click in the middle of one and move it around, and then the others until you get them positioned as you want.
    When you click again with the move tool a bounding box appears around the image and you can drag out the corner handles to re-size your photos. Hold down the shift key when dragging the corner handle and that will maintain the proportions of the original.
    Finally click Layer >>Flatten Image and save your collage - you may then want to use the crop tool to cut away any surplus white canvas, and then re-save.

  • IMovie 10.0.5 Picture in Picture

    Hi,
    I make YouTube videos and I always use picture in picture on the end screen to show my last video. I haven't made one for a couple of weeks and I'm just finishing a video off but it won't let me resize the picture in picture box even when the blue dots are there. Just stays very small. Any ideas on how I can force it to do my bidding? It's hugely frustrating when I'm so close to completing it! Example in screenshot attached, any help gratefully received!

    here's a video that explains: http://www.youtube.com/watch?v=MzyVDYPBM4c

  • I want to add a photo as an attachment and NOT have it pictured in the body of the email.

    I want to add a photo as an attachment and NOT have it pictured in the body of the email.
    When I click on the paper clip to attach, it always is pictured in the email.

    https://discussions.apple.com/message/16802006#16802006

  • PSE 5 emailing pictures in order picture was taken.

    I have PSE 5 and I have never figured out why it is when I email pictures they are always oldest picture first when they are in the email. It doesn't matter which picture I attached to the email first, it is alway oldest first when the person recieves the email. The first picture they seeis always the oldest picture.
    I use the PSE email by clicking the email at the top of the page when I have the catalog organizer open. The drop down box under format I have individual attachments chosen. Also it doesn't matter if I have the organizer dated oldest first or newest first. It still sends them as the oldest picture first. Can someone tell me why this is? Thanks!

    Since you are using attachments, I suspect that it is your email program that is determining the order of the attachments and not Photoshop Elements. Also when the recipient views the photos, I suspect that their email program may also influence the order the attachments are viewed.
    One approach that people sometimes use is to place the photos to be emailed in a PSE Collection, then use the PSE Organizer Export function specifying the Base Name option. Designate the output from the Export function to go to a new Windows folder that you create and then attach the contents of that folder to your email. (At the time that you  use the export function, you can also  downsize the resolution of the photo files for email transmission. Since the export function creates new files, you will not be overlaying your existing full resolution photo files.)
    By choosing the Base Name function when you did the Export from the Collection, the file names will designate the sequence in which the photo files should be viewed.  Even if the recipients email program did not present the photo files in file name sequence, the recipient would have the possibility of downloading the photo files to their computer and viewing in Windows Explorer using File Name sequence.

Maybe you are looking for

  • How can I create a custom feature, which will automatically take a custom master page while creating a site ?

    Hello , I am new in Sharepoint development . I am trying to create a Sharepoint feature to Activate master page automatically while creating the site .Below mentioned code I am using to do this .  But When I am creating any site under site collection

  • How to go to preceding page of the safari

    Dear sir I am user from Taiwan I have  a small trouble about safari Sometime the safari can not going to preceding page It was shown that line FB Google+  Mail on the page lower So how to preceding page From Odon

  • SQLException Calling Stored Procedure

    Hello all, I'm getting the following exception when calling a stored procedure from Java. Maybe someone can help me out here. See details below. Exception java.sql.SQLException: ORA-01747: invalid user.table.column, table.column, or column specificat

  • List contents of a directory of the J2EE engine

    Hello, I have a requirement to list the contents of a directory of the J2EE engine of the portal. For example let's assume that there are five files in directory /user/sap/<SID>/JC02/j2ee/cluster/server0/some_directory_name. I want to be able to list

  • Working Message (popup)

    I've got a process that can take up to 20 seconds to come back, sometimes quicker depending on the search criteria the user has chosen on the 'Criteria Page'. I would like to put up a popup dialog message that has a flashing "Working ..." message on