Always crashing and rebooting when booting from my new win7-disc. Lenovo 3000 n200 0769-erg

I have a fully working Vista system on my n200, trying to boot from my new win7-disc, even tried to boot from usb but it's the same:
"Loading windows files" followed by "Starting windows" with the new win7-logo.. After that comes a fat cursor(guess the resolution is lower, like in "Rescue and recovery").
This cursor and a black screen is all I see for ~5 secs before it crashes. Same thing every time.
It might be Rescue and recovery that starts there and crashes. If that's the case, how do I remove it/fix it in a safe way? Or can i try something else first?
I am able to boot Linux from CD fyi..
Thankful for any help.
Regards

hi perp,
If you have tried installing Windows 7 in both AHCI/Compatible mode and the Windows 7 installer still crashes, can you try to run a diagnostic on the RAM/HDD (to make sure there's no hardware fault).
To run the diagnostics:
1. Download the the UBCD ISO
2. Burn the ISO using imgburn
3. Boot from the diagnostic cd and use MemTest86+ for the memory test and use Data Lifeguard (if you have a Western Digital HDD).
To burn the diagnostic softwre on a flashdrive, follow this guide.
If you get any errors, you will need to contact lenovo for service or you can DIY and replace the defective components.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Lenovo 3000 N200 0769 A42 not booting anymore

Hi,
We have a Lenovo 3000 N200 0769 A42 that is not booting anymore. Concretely, when the on/off button is pressed, the fan goes on for a few seconds, the HD led is switched on and the CDrom is running for a few second too, then nothing else, except the "On" led that remains switched on...
I tried this: http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Help-How-to-reset-CMOS-on-3000-N200-model-076... to no avail.
I removed the keyboard and unplugged for one minute the only plug I found with red and black wires, to no avail either...
The computer seems dead... Any suggestion to reanimate it?
Thanks in advance,
Pierre

Hi, Thank for the reply.
There is nothing displayed on the screen and no access to the Bios.
I did tried to reset the motherboard after having removed the AC power, the battery, the HD and the RAM (by short cutting two exposed metal traces labelled CLRP1 and by unplugging the battery cable found behind the keyboard. To no avail...
I realize that the url given in my first post does not work. Here it is:
http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Help-How-to-reset-CMOS-on-3000-N200-model-076...
Thanks again for the suggestion. Any other?
Pierre

IPod causing my laptop to crash and reboot when connecting to USB !!

Hello all,
Here is what I am working with, 30 GB , 5th gen Video iPod with Itunes 7.6.2.9
Problem:
I have had my Sony Vaio laptop with Vista for a couple of months and it had been humming along just fine with my 30GB Video iPod. After loading some new pics via Itunes recently I noticed that the capacity used information in the About section of the iPod was incorrect, my iPod was showing 1gig left, and I only have 500 songs, 600 photos, 3 videos and some podcasts loaded. Itunes showed I had plenty of space left so that contradicted what the Ipod reflected. So after some googling I found that the recommended solution was to restore your iPod and reload all your music back via Itunes. Little did I know that trying to solve that little problem would create a far greater one.
First using an external hard drive (Western Digital) I backed up all of my music from Itunes. I then started the restore process via Itunes, during the restore my computer hung and froze. Then my computer crashed and rebooted. When it came back up I plugged the iPod back into the USB to complete the restore, this time however my laptop did not recognize my iPod (note, it is empty, with no music since I did the restore). Instead my system assigned it a drive letter G: in the my computer section. A message box pops up asking if I want to scan and check or skip this new drive, it also says scan is recommended. I selected the scan and it checked the Ipod with no problems. If I elect not to scan the iPod then the computer will crash within 30 seconds. After it scans it appear s as if it is going to synch up, iPod says ‘do not disconnect’, then bam, computer crashes and reboots with the black screen. I tried various troubleshooting steps and each time when plugging the iPod in Itunes it starts up and it takes maybe 1 minute trying to recognize it when the computer crashes and reboots automatically going to the black screen and doing a file dump. It seems that no matter what I do Itunes does not recognize the iPod, the system sees it as a mass storage device, hence I am unable to complete the restore.
To troubleshoot I have done the following without any luck:
- Removed Itunes (3x, using different versions) and reinstalled it, tried again
to restore nothing, still crashing
- Removed and reinstalled Quicktime as stand alone, still same thing. Note: for some reason on Vista you have to have Quicktime installed separate as stand alone and not select the automatic bundle version that comes with Itunes otherwise you will get a separate error that won’t allow you to open Itunes and it will say it’s corrupt. I spent hours on just this problem.
- Downgraded my Itunes to an older version. Same problem.
- Upgraded ITunes to the latest and greatest, 7.6.2.9, nada.
- Reformatted my ipod at the command line, so as to bypass my computer from doing it, plugged it back in, this time it went a little longer before it crashed when Itunes came up.
- Downloaded and installed all the latest Vista patches and fixes.
- Downloaded and installed the latest Sony patches and fixes.
- Re-assigned the drive letter on my Ipod, changed it to “Ipod”, “P”, and lastly “Q”, still shows up on my system as that drive letter, then Ipod. Another time it showed up just as drive letter, and “mass storage device”. Still Itunes is not recognizing it.
- Plugged the iPod into different USB ports, 3 different ones, still same.
- Checked each USB port, a sound does come on for each port when either plugging in the Ipod or another device, all ports recognize when a device is plugged in.
- Made sure no other devices are plugged into the USB ports.
- Disabled every single USB port via Device Manager, then plugged in Ipod, at that point it didn’t even recognize it.
- Disabled every single USB port, except for 1, then plugged in Ipod, recognized in computer but not Itunes, then Itunes tries to recognize it, during that time my computer crashes and reboots
- Disabled and reenabled every single USB port, then tried. Ipod is recognized in device manager but not Itunes. Ipod shows message “do not disconnect” for awhile, seems like its working… then bam, my laptop crashes. By the way, Itunes does come up and all my music is there.
I also did this:
Reset the iPod using these steps:
- Disconnect iPod.
- Make sure the 'hold' switch is not on.
- Press and hold the 'menu' and 'select' (circle) buttons simultaneously.
- Keep holding them both down for at least five seconds.
- The iPod displays the apple logo and properly resets.
In summary, I have spent over 30 hours working on this problem. Bottom line is Vista is assigning a lettered drive to the iPod thinking it is a mass storage device, hence it is not being recognized in Itunes enabling it to complete the restore. To complicate matters before you can do much troubleshooting the *laptop crashes and reboots within 3 minutes of plugging the iPod into any of the USB ports.* !!!
This is just utterly insane, don't know what else to do. For starters stopping my laptop from crashing everytime it is plugged in would be nice !
Losing it in L.A.

+I tried various troubleshooting steps and each time when plugging the iPod in Itunes it starts up and it takes maybe 1 minute trying to recognize it when the computer crashes and reboots automatically going to the black screen and doing a file dump.+
I'm curious about this point. Is there any flash of a blue screen at any point here? (That's a more familiar sort of thing to be seeing prior to the system doing a restart after a serious error.)

2630 crashed and reboot when PC suite try to read ...

It was first time I use PC suite on this notebook.
I used pc suite v7.1.26 (latest as so far) to connect my 2630 via bluetooth on windows xp with sp3, and everything seems be OK.
At first , PC suite read my contacts and calendar from my phone correctly.
BUT when I click the message icon in PC suite ,the program showed it try to read SMS from 2630 and the progress bar stay at 0% for about 10 minutes, then the 2630 crashed and reboot itself.
Such thing happened again and again .
I just want to export my SMS from 2630, it's about 2900+ SMS in my inbox and 1700+ SMS in my sent box.
Could any one can help me to fit this problem? Please
Thanks very much!
celon

Hi celon,
As you said you have 4600 messages in total and if you want that be shown in PC Suite using Bluetooth .... Its highly recommended to use cable whenever you are working with huge amount of data.... Bluetooth connectivity is not faster when compared to USB... but i am afraid if your phone has USB Connectivity i think it doesnot have, correct me if i am wrong... So its tough ask for pc suite

My 21.5 inch 2010 iMac won't stop crashing and rebooting when I put in my 8GB 1 piece Kingston RAMstick

I have the 21.5 inch 2010 iMac and I bought this Kingston 8GB 1 piece Ramstick (http://www.amazon.com/Kingston-Technology-1333MHz-KTA-MB1333-8G/dp/B007TGZ4UY/re f=sr_1_7?ie=UTF8&qid=1401114006&sr=8-7&keywords=iMac+1333Mhz+RAM) and when I put it in my Mac, and I start up my Mac, it crashes and reboots itself. Then it happens over and over again. No matter what I do. Anyone have a solution?

If it is Kingston ValueRAM, that product has been troublesome since Intel Macs were introduced in 2006.
Look to Crucial or OtherWorld Computing (macsales.com).

Lenovo 3000 N200 ( 0769- A63) 0769 BAG processor upgrade limit and type

i have folloing system properties
TYPE
0769-A63
07/12
Name
Lenovo 3000 N200 Notebook (0769-A63)
Specs
Based on 0769-BAG: T2330(1.6GHz), 2GB RAM, 120GB 5400rpm HD, 15.4in 1280x800 LCD, Intel X3100, CDRW/DVDRW, Intel
802.11abg wireless, Bluetooth, Modem, 10/100 Ethernet, Secure chip, Fingerprint reader, Camera, 6c Li-Ion, DOS
License
Chipset: Intel 965 Express Chipset probably
i want to upgrade my processor to core2duo etc
what will be the type/types of processor/s that can be used to upgrade it and what is the upper limit of speed of processor that can be attached
thanks
Moderator Note; s/n edited for member's own protection

Wow, thank you, what an awesome little tool!
So, I found that these 2 RAM products are compatible with my laptop:
Part Number: CT758799
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-6400
Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64 •
Part Number: CT699699
Module Size: 2GB
Package: 200-pin SODIMM
Feature: DDR2 PC2-5300
Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64 •
I then went to a well-known auction site and found RAM cards from the same manufacturer with exactly the same specs as above but with different Part numbers. Does it have to be the exact part number or do I stand a good chance of it working if it has the required spec? I searched for the exact part numbers and yielded 0 results.
Thanks for all your help on this.

PowerBook 17 crashes consistently, even when booted from Tiger DVD

We have a new PowerBook 17 that has started giving us problems in the last day or so. It will hang after running for a few minutes. This is a consistent problem - it doesn't go away for an hour, or a day - if the machine is running, it will hang. There is no kernel panic, no dialogue box, the trackpad, mouse, etc. simply stop responding (the clock freezes too, so I know the system is hanging up - not just input devices).
I've managed to run throught most of the normal trouble-shooting methods, I say "managed" because the machine froze when I was booting into single user mode. So I went to the Tiger DVD that shipped with the laptop. Upon getting to the language selection dialog box - it froze again (no mouse, keyboard activity, etc.). Eventually, the machine did boot from the startup DVD - and I ran disk utility. Of course it found no problems with permissions or the disk because this is apparently hardware related, no?
That being said, an archive and install will probably do us no good. But would Tech Tools (came with our AppleCare) manage to at least spot a Hardware issue? At this point, the only thing I haven't done is removed the third-party RAM we installed (which has been installed for nearly two weeks with no sign of conflict). That will be the next course of action and we'll run Tech Tools. Any ideas or suggestions regarding this issue would be greatly appreciated. We all know that being down one machine is not a good thing - thanks in advance for any assistance.
PowerBook G4 17" 1.67 Ghz Mac OS X (10.4.5) Might Mouse, 1.5 GB RAM, 100 GB HD
PowerMac G4 Mac OS X (10.4) 20" Cinema Display - 2G 20GB iPod - much, much more

David,
I always had a pristine system: no kernel panics, no system hangs. Then, one day I started to have kernel panics and hang ups and when I tried to install XCode it failed, then I couldn't install iWork '06. At first I thought it was a problem with the disk until I decided to run Apple's hardware test. After all, it was just a problem with one of the 512MBs memory DIMMs. Removed the offending DIMM and everything went back to normal.
So, I think you should try the hardware test. To do this just start up from the original installation disk while pressing the option key and then choose Apple Hardware Test from the available startup disks.

Why does my mac mini crash and reboot when I do a time machine backup to a USB Hard Disk?

This is the second time it has happened, the first was with a powered USB Hard Disk, this time with a WD Elements HD.
The first time, it crashed and popped up an alert saying the machine needed to be restarted.
After restarting it continued, then around half way through it crashed again.
It then would not boot as it said the Mac Mini's HD was corrupted.
Tried to repair using the recovery mode, with no joy.
Reformatted Hard Disk, went to recover using online recovery, got a 6002F error and it wouldn't reinstall
Took to apple service centre, they wanted to charge to reinstall the OS (put them straight on that ).
Now it looks like it's doing it again, this time after the first crash I'm just copying the files I need manually to the external Hard Disk, which so far is OK.
Seems these macs aren't so reliable.
Any ideas?
Cheers

Hi den.thed,
thanks for the tips, unfortunately when tryong to start the machine to do a Hardware test (to check RAM) I get the error 6002D so I'm guessing there's something more complicated afoot.
Unfortunatley the service centre here in Malaysia doesn't seem to have any "Geniuses" or indeed any "Comptencies" as it has only just come back from their after they had it for a week.
Makes me want to buy Dell, at least the come to you to fix.
Just in case it's of an help, here's the Kernel Panic that kicked off today's fun.
Mon Jun 18 10:49:47 2012
panic(cpu 2 caller 0xffffff80004e0294): "hfs_swap_HFSPlusBTInternalNode: attr inline #27 too big (attrSize=70)\n"@/SourceCache/xnu/xnu-1699.26.8/bsd/hfs/hfs_endian.c:822
Backtrace (CPU 2), Frame : Return Address
0xffffff812e5ebd50 : 0xffffff8000220792
0xffffff812e5ebdd0 : 0xffffff80004e0294
0xffffff812e5ebe20 : 0xffffff80004e128c
0xffffff812e5ebe70 : 0xffffff80004d4ed4
0xffffff812e5ebeb0 : 0xffffff800031ef00
0xffffff812e5ebf90 : 0xffffff800031fff2
0xffffff812e5ebfb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 2217359583984
last loaded kext at 905164039721: com.apple.filesystems.ntfs          3.10.1 (addr 0xffffff7f81072000, size 376832)
last unloaded kext at 1040650199883: com.apple.driver.AppleUSBCDC          4.1.17 (addr 0xffffff7f80791000, size 12288)
loaded kexts:
com.apple.driver.AppleIntelProfile          85.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.driver.AppleMikeyDriver          2.2.0f3
com.apple.driver.AppleIntelHD3000Graphics          7.1.8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleHDA          2.2.0f3
com.apple.driver.AGPM          100.12.42
com.apple.driver.ApplePlatformEnabler          2.0.5d2
com.apple.iokit.IOBluetoothSerialManager          4.0.5f11
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.AppleSMCPDRC          5.0.0d0
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d0
com.apple.driver.AppleLPC          1.5.8
com.apple.filesystems.autofs          3.0
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.5f11
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.0.3
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleAHCIPort          2.3.0
com.apple.driver.AirPort.Brcm4331          530.4.20
com.apple.driver.AppleSDXC          1.2.0
com.apple.iokit.AppleBCM5701Ethernet          3.1.2b2
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.8
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          193.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.3
com.apple.driver.AppleIntelCPUPowerManagement          193.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.0
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.driver.AppleProfileTimestampAction          85.2
com.apple.driver.AppleProfileThreadInfoAction          85.2
com.apple.driver.AppleProfileRegisterStateAction          85.2
com.apple.driver.AppleProfileReadCounterAction          85.2
com.apple.driver.AppleProfileKEventAction          85.2
com.apple.driver.AppleProfileCallstackAction          85.2
com.apple.iokit.AppleProfileFamily          85.2
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.DspFuncLib          2.2.0f3
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAudioFamily          1.8.6fc17
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleHDAController          2.2.0f3
com.apple.iokit.IOHDAFamily          2.2.0f3
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.driver.AppleSMC          3.1.3d8
com.apple.driver.IOPlatformPluginLegacy          5.0.0d0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          5.1.0d17
com.apple.kext.triggers          1.0
com.apple.driver.AppleIntelSNBGraphicsFB          7.1.8
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.0
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.2
com.apple.driver.AppleThunderboltDPInAdapter          1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.5f11
com.apple.iokit.IOBluetoothFamily          4.0.5f11
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.driver.AppleThunderboltNHI          1.5.5
com.apple.iokit.IOThunderboltFamily          2.0.0
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.5
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.6
com.apple.iokit.IOStorageFamily          1.7.1
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4
Cheers

[Solved] Grub errors 18 and 22 when booting from SSD

Hello community,
recently I purchased an SSD drive and am now having trouble doing an Arch install on it. Before that a 2TB HDD was in use. After building in the SSD I partitioned it (msdos partition table) creating partitions for swap, / and /home. Then I copied the files from the old /home partition on the freshly created one and installed Arch on the new / partition. Here's the partition setup:
$ LANG=C sudo fdisk -l
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003a234
Device Boot Start End Blocks Id System
/dev/sda1 2048 3907028991 1953513472 5 Extended
/dev/sda5 16065 4192964 2088450 82 Linux swap / Solaris
/dev/sda6 4196352 65720319 30761984 83 Linux # old /
/dev/sda7 65722368 577720319 255998976 83 Linux # old /home
/dev/sda8 577722368 3907028991 1664653312 83 Linux
Disk /dev/sdb: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a9841
Device Boot Start End Blocks Id System
/dev/sdb1 51863552 241582079 94859264 83 Linux # new /home
/dev/sdb2 241582080 250068991 4243456 82 Linux swap / Solaris
/dev/sdb3 2048 51863551 25930752 83 Linux # new /
Partition table entries are not in disk order
The problem is: booting from the SSD fails as follows: On the first try to select some Grub entry I get an error 22 "No such partition.". On any further try I get error 18 "Selected cylinder exceeds maximum supported by bios".
What works is to boot up the new system from the Grub residing on the HDD. So the problem is just the new Grub install in the SSD's MBR. Also it's not a thing of Grub's configuration, since copying the working menu.lst from the HDD install and reinstalling grub via grub-install /dev/sdb gives the correct Grub entries but selecting them results in the same errors.
So currently I'm booting from the HDD and selecting the boot entry for the freshly installed SSD system there, which works fine. But of course I'd like the SSD to be able to boot without "help" on the part of the HDD.
I tried to activate AHCI in the Bios but it didn't make any difference. The SSD is a Crucial M4 128GB.
Thanks for any hints,
PhotonX
Last edited by PhotonX (2012-07-26 06:04:53)

I created a /boot partition now:
$ LANG=C sudo fdisk -l
Disk /dev/sdb: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a9841
Device Boot Start End Blocks Id System
/dev/sdb1 51863552 241582079 94859264 83 Linux # /home
/dev/sdb2 241582080 249831423 4124672 82 Linux swap / Solaris
/dev/sdb3 2048 51863551 25930752 83 Linux # /
/dev/sdb4 * 249831424 250068991 118784 83 Linux # /boot
Partition table entries are not in disk order
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003a234
Device Boot Start End Blocks Id System
/dev/sda1 2048 3907028991 1953513472 5 Extended
/dev/sda5 16065 4192964 2088450 82 Linux swap / Solaris
/dev/sda6 4196352 65720319 30761984 83 Linux
/dev/sda7 65722368 577720319 255998976 83 Linux
/dev/sda8 577722368 3907028991 1664653312 83 Linux
Then installed Grub on this partition: "grub-install /dev/sdb4". Then placed the SSD on the first position in the Bios, booted but got the same errors in Grub. So it doesn't matter where exactly Grub is installed, if it's somewhere on the SSD, it fails...
edit: Concerning using UUIDs: I couldn't find any howto regarding Grub (legacy) configuration with UUID's. Could you point me to some example config?
edit2: I now put the SSD on the first place in the boot list and started PartedMagic. But fdisk still recognizes the SSD as sdb and the HDD as sda. I think, the sdX identifier can be changed only by plugging the SSD in the first SATA port and the HDD in the second (while now it is the other way around).
edit3: I tried to install Grub from the HDD installation on the SSD (executed "grub-install /dev/sdb4" from the HDD system) and found out that, though I created a /boot partition on the SSD, the Grub files installed directly on /dev/sdb are used. So I tried to install Grub from the HDD system onto /dev/sdb (executed "grub-install /dev/sdb" from the HDD system) and got error 22 even before Grub's boot list was shown. But maybe it's really a bad idea to install Grub on another drive than the system it belongs to is located.
Last edited by PhotonX (2012-05-18 21:54:56)

Treo 680 GSM Crashes and Reboots when using Instant Messaging Software

I've had this problem since I got the phone last week and haven't had the time to look into it at all. Whenever I use the AIM software provided by AT&T or a 3rd party software such as Toccer the phone will crash and reset if i leave the program or recieve a text message/phone call.
I know you'll want the crash info so here's the message:
A CRash Occured on 7/13/08 at 1:11am while running "application"
Emul68kMain.c, line:456, line 1111 exception at address 7323673E
I had originally thought it was just the software that AT&T provided but when it did the same thing with Toccer I began to wonder if it was a bug in the phones firmware. Can you guys be of any assistance?
Thanks in advance
Jeremy
Post relates to: Treo 680 (Unlocked GSM)

Hello Jeremy and welcome to the Palm fourms.
Have you looked at the Palm Treo 680 for AT&T software update 2.11? Details are here.
Alan G
Post relates to: Treo 755p (Sprint)

Kernal Panic when booting from AC Tech Tool disc

Okay, here's one to stump y'all:
I have talked to Apple Support, brought the machine to the best service center (Springboard Media in Philly) and no solution yet. Here's what happens:
Whenever I try to boot up from the Tech Tools Deluxe disc that came with my Apple Care Plan, Tech Tools Pro or Disk Warrior, the G5 panics about two seconds after I get to the grey apple screen. This happens every time. Now the interesting thing is that this did not happen when Springboard tried the same thing. Could this be a hardware issue that just wasn't found? I was assured that Springboard ran extensive hardware and software tests and came up with nothing.
I am at a loss. When I called Apple about this initially, the dude I spoke with decided that it must have been the media and promptly sent me a replacement Tech Tools Deluxe disc. Of course this did nothing. I am hoping someone on the forums will have some insight on this...
Cheers,
Matt
MDD Dual 867 | G5 Quad 2.5 Mac OS X (10.4.8) Sam Smith's Oatmeal Stout, Maker's Mark bourbon and a whole lotta RAM

Hi- Thanks for the comments.
Yes, non-Apple RAM is installed. I had faulty RAM and found it and it was replaced by a very reputable third party company. I should have mentioned all the steps I have gone through (prior to bringing it into Springboard):
First noticed something was wrong when the machine was just shutting off w/o warning (ie like I pulled the plug). This happened a few times over the first two months of owning the machine, but seemed to progress (the G5 is only 4 months old). So that's when I initially tried booting from the TTD and TTP discs, to no avail. Then I went on to Apple Hardware test, which I could boot to fine w/o any problems. Ran the test in Loop Mode. The test would pass the everything up to the memory and then the machine would shut down. This happened quite a few times, so I know it wasn't a fluke. Finally got the AH test to confirm that one of my 2GB DIMMs was shot. That's when I sent it back, and continued testing with the stock 512MB (ugh) with no problems. However, even with the stock 512 in the machine failed to boot from TTD or TTP or DiskWarrior. Which made me think it was the optical drive. (And consequently when I started thinking this was above my head.)
So called Apple, and we reset the PRAM, the NVRAM, unplugged the machine for two minutes etc. Standard reading from a script Tier One. All to no avail.
Got the RAM back from the 3rd party (OWC), called them to confirm that the RAM I had sent back was faulty and that they had personally tested the DIMMs they sent back to me, which they confirmed had passed AH test. I then installed the 4GB, ran AH again - no problems. But, the booting from a CD/DVD problem still persisted.
I really doubt whether it is the OWC RAM at this point, as I successfully tested it, as did Springboard. I must reiterate that Springboard had no problems booting from TTD, TTP, etc.
I wish I could get a good photo of the KP when I boot from the TTD, cos the system profiler doesn't record it in the logs.
I think this covers pretty much everything I have done so far... I look forward to your responses.
And thanks for the luck!
MDD Dual 867 | G5 Quad 2.5 Mac OS X (10.4.8) Sam Smith's Oatmeal Stout, Maker's Mark bourbon and a whole lotta RAM

My Yoga 13 Ideapad crashes and reboots when I connect to an external monitor!!

I have the Lenovo ThinkPad USB 3.0 Dock through which I am trying to connect to my desktop monitors.
What happens is an automatic reboot. After that reboot, I have been able to log into the machine again, but it will reboot after 2-3 minutes - maximum - if I am lucky.
I searched the forums, but did not find any other with this exact problem, so any help in discovering what goes wrong and how I can fix this is of course greatly appreciated.
My Yoga 13 is brand new, all the Windows Updates and Lenovo Updates have been applied, so I do not think it is missin device drivers. The docking station's software was installed before I hiooked it up, and I have tried connecting both through the USB 3.0 and the UISB 2.0 port, but that does not solve any problems.
Looking through the Event Viewer shows these errors occurring:
* "The Desktop Window Manager has encountered a fatal error (0x8898008d)." This happens 8 times in a row
* Then: "The winlogon notification subscriber <AUInstallAgent> was unavailable to handle a critical notification event."
* "The description for Event ID 1 from source DptfPolicyLpmServiceHelper cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer." I have 2 of those.
* In the System event log, I see this at the same time of the crashes: "The DisplayLinkManager service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 271311 milliseconds: Restart the service."
I have no idea on how to solve this issue, so please, if you have any tips or fixes for me, please let me know!

hi nilsandreas,
can you please check c:/windows/minidmp folder and if there's any file, can you please upload it so i can check it?

I own a macbook pro mid-2010 - problem-updated to mountain lion and continuously crashes and reboots when working with audio and visuals (TRIED GFXcardstatus v 2.3) sometimes helps sometimes it does not, apple info ?

I know this is a widespread problem
I am not from the U.S.
what solutions does apple have for us? , are there any?
I read there's an issue with the NVIDIA card , is there anyone I can contact? I bought it in the U.S.

If the machine is less than 3 years old, Apple will replace the motherboard under a recall program. If it's older you may get stuck with that cost. I'd make a Genius Bar appointment and take it in.

No sound when playing a DVD on my Lenovo 3000 N200 (0769-A44)

Hi,
I recently got an N200 under Vista Home Premium. Everything is doing well, except an annoying problem with PowerDVD 7 which is factory-installed. When I play a DVD with PowerDVD, there is no sound. With Windows Media player, MediaCenter and even MediaPlayer Classic, the sound is there. Only with PowerDVD is there no sound.
Any hint on how to solve this ?
Thanks !
.merle1.
Update 2008-04-30 : the problem only appears when playing commercial DVD that rely on AC3 codec for sound. For recorded DVD that use MPEG2-Layer2, sound is OK. Seems to be a limitation of PowerDVD OEM. However, if there is a solution ...
Message Edited by MerleOne on 04-30-2008 05:55 PM
Message Edited by MerleOne on 04-30-2008 05:56 PM

Thanks for sharing this. For the moment, and until someone finds a solution, I am relying on WMP and also on an opensource player that can play DVD, Media Player Classic :
http://sourceforge.net/project/showfiles.php?group_id=82303)
Very easy to use. May be it will solve your problem with the DVD player noise ? There is also an excellent media play, that plays DVD, and that I intend to install : JetAudio 7, from Cowon.
http://www.cowonamerica.com/download/
Message Edited by MerleOne on 05-06-2008 08:20 AM

Ubuntu (Gnome) and keyboard on a Lenovo 3000 N200 (0769-BAG)

Hi !
I bought this one a long time ago and ran various Linux version since the beginning.
I started with Fedora and was upset by the too fast upgrade rythm.
So I switched to Ubuntu. I'm using 10.04
I discovered that a lot of keyboard keys are not running So I turned the keyboard in the control panel to the various IBM Thinkpad models availlable, but I'm unable to get the numeric keyboard (Fn+Suppr) to work (the light goes on, and the key switches for example the U disapears but no 4 displayed and no error in any log ) Same for the brightness change (Fn+F10 or Fn+F11) or screen switching
So here is my question :Is there somewhere a full definition for the various Lenovo laptops keyboards for us to use ?
Many thanks in advance for your help !

Thanks for sharing this. For the moment, and until someone finds a solution, I am relying on WMP and also on an opensource player that can play DVD, Media Player Classic :
http://sourceforge.net/project/showfiles.php?group_id=82303)
Very easy to use. May be it will solve your problem with the DVD player noise ? There is also an excellent media play, that plays DVD, and that I intend to install : JetAudio 7, from Cowon.
http://www.cowonamerica.com/download/
Message Edited by MerleOne on 05-06-2008 08:20 AM

Always crashing and rebooting when booting from my new win7-disc. Lenovo 3000 n200 0769-erg

Similar Messages

Maybe you are looking for