ALWAYS Display Printing.... Cool-Down mode

I need that private-message solution, too.  My printer is on a table, set well away (8 inches) from the wall, and is plugged directly to the AC outlet.  The paper is Office Max Laser Paper, 96 bright, 24 lb., 8 1/2 X 11.  One page prints, then the printer stops and the "Printing. . . Cool-down mode" message appears on the panel; that message stays on the screen for about 3-5 minutes, then another page prints, and the cycle continues.  "HP Update" reports "No new updates available."  This just started today, right in the midst of my printing some needed material.  Please help!

Thanks so much for taking the time and trouble to reply to my plea.
     A confession:  I found that I did not need to perform the NVRAM Programming Reset on my printer.  Since, with the "Printing . . . Cool-down mode" pauses, the printer was taking so long to print each page, I left it working to go off and do some other chores.  While I was away, the paper ran out, and naturally the printer stopped printing.  By the time I got back and loaded more paper, quite a bit of time had passed.  When I resumed the printing process, the printer worked fine.
     My guess:  between the time the paper ran out and my starting it again, the printer had cooled enough that it no longer had to go into "cool-down mode" after each page.  I used the printer again this morning, and it worked perfectly.
     So my suggestion to others who have this problem:  try shutting down the printer for 15-20 minutes.  When you turn it back on, it just may work correctly again.

Similar Messages

  • MFP M176n Printing Cool-down mode problem

    I just boughjt a HP color laser jet pro MFP M176n which has now is  always show 'printing cool-down mode' after a few pages prinitng. It's too long to complete the printing work. Appreciated if you could help solve the issue urgently. i tried all the above suggested solution , i am desperate,please send me the private message as you did to others ,i need a workable solution  or i may have to return printer

    Hi @xpresscomputer, I understand that you are getting a "Cool-down" error. I would be happy to help you. I wasn't sure what steps you have tried so far, so I am providing all the steps to see if it will help resolve the issue and I can send you that information in a private message. In the forum beside your handle name just click on the envelope to view it. I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. Software and Driver Downloads. If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Have a nice day!
    Thank You.

  • Cool Down Mode

    Hi everyone! I have an HP Laserjet Color 100 MFP M175a...I bought it two months ago and until now I've printed many documents of excellent quality ...I changed the toner and it has continued to print fine, until today ...after printing 100 page b/w and color,  the display sign Printing Cool Down Mode...One page every 10 minutes...it's impossible to continue..Please, someone can help me...
    Thank You!

    Hi Notorius, 
    This is normal when you are printing this many pages at one seating. The fuser which bonds the toner to the paper needs to have a chance to cool down so that it doesn't over heat and cause damage to the paper or printer.
    Printing... Cool-down mode - The product is too hot to continue printing at normal speed. The product will pause longer between printed pages until it cools down.
    Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.
    Please refer to the document below for more details.
    Resolving Control Panel Messages
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Mfp m177fw ALWAYS Display Printing..​.. Cool-Down mode

    May I have solution too? My wife made me so many noise to me about this product. Pls.

    Today, 5 May 2014, I just installed my newly purchased HP Color Laserjet Pro MFP M177fw printer. As soon as I start to print, I am getting this "Cool-Down mode". This messege continue to appear everytime after one page is printed.
    How do I resolve this problem or what should I do?

  • HP Color LaserJet Pro MFP M177fw Printer always cool-down mode

    Hi there, i am also meeting with the same issues like the cooldown mode printing.

    Hi , I found something written by  that you may find helpful regarding the printer going into cool down mode: I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. HP Color LaserJet Pro MFP M177fw Drivers. Where is the printer located? (enclosed shelf, desk)How many pages are you printing when you get this message?What is the paper's weight and what kind of paper are you using?  If the issue persists, please post back with the answer to the above questions.  Thanks.   

  • HP printing in cool down mode

    Dear HP Forum, I have the same problem with my m177 printer, always printing in cool down mode. Very frustrating. Please send me solution urgently. Thanks, Yuta10

     Hello there , Welcome to the forums I read your post about the troubles with Cool Down Mode, and wanted to reach out with my suggestions. First, please see the recommendations for this concern from my colleague  in this thread here: mfp m177fw ALWAYS Display Printing.... Cool-Down mode If the problem continues, then please contact HP directly to discuss your printer replacement options: Step 1. Open link: www.hp.com/contacthp/
    Step 2. Enter Product number or select to auto detect
    Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
    Step 4. Scroll down and click on: HP contact options - click on Get phone number
    Case number and phone number appear.  Have a great day

  • PRINTING IN COOL DOWN MODE PROBLEM IN HP LASERJET PRO 100 COLOR MFP M175a

     i recently bought HP Laserjet pro 100 color MFP M175a but it prints like 40 pages and goes to cool down mode and it takes like 10 minutes to cool and again it prints 40 pages  so i donot the problem

    Hi @teko2014, 
    I see by your post that the printer keeps going into a Cool-Down mode. I can help you with this. I can help you with this.
    I have provided a document with Resolving Control Panel Messages.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Update the printer's firmware. HP LaserJet Pro 100 color MFP M175a Drivers.
    Select your operating system, click next, click the link for firmware.
    Where is the printer located? (enclosed cabinet, desk)
    If the printer is in a enclosed area, temporarily move it to another open location and try printing again.
    What is the paper's weight and what kind of paper are you using?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Stuck in cool down mode

    Phone stuck in cool down mode for 24 hrs and will not charge tried the reboot and got to the first menu and seleceted reboot and then the screen goes black and I cannot get the menu back so I cannot do the data reboot or the factory reset what can I do next

    This will clear the cache partition on your phone and give you a clean reset to stop the cool down mode. This will not delete any information from your device.
    Do  the steps below listed below if you have not already tried this
    1. Power up the phone by pressing the VOL UP + VOL DOWN KEY together + POWER KEY .
    2. The device will enumerate with different BOOT OPTIONS
    3. Use the VOL DOWN Key to SCROLL and VOL UP Key to SELECT
    4. Select Recovery
    5. The device will start up with Motorola logo and power up to a little Android man logo with Exclamation mark
    6. Press the VOL UP and VOL DOWN Key together at this screen
    7. The device will display BLUE Text on a Black background .
    8. Use the VOL DOWN Key to scroll DOWN and the POWER Key to SELECT the option desired .
    9. In this case , press the VOL DOWN key till the cache partition wipe is selected and press the POWER key to confirm the selection .
    10. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM .
    11. The device will then start performing the partition wipe
    12. Once the Formatting is complete , press the POWER key to confirm a REBOOT
    13. The message rebooting is displayed on the phone.
    14. The device will reboot and start the normal power up sequence .
    If you're still having the issue after this the next troubleshooting I can suggest is to perform factory reset. You can follow the instructions on how to reset your phone here https://motorola-global-portal.custhelp....

  • Droid mini stuck in cool down mode

    My droid mini is stuck in cool down mode and  I cannot get it out it. I have looked at all the forums and such and cannot do what they say to get it out.

    This will clear the cache partition on your phone and give you a clean reset to stop the cool down mode. This will not delete any information from your device.
    Do  the steps below listed below if you have not already tried this
    1. Power up the phone by pressing the VOL UP + VOL DOWN KEY together + POWER KEY .
    2. The device will enumerate with different BOOT OPTIONS
    3. Use the VOL DOWN Key to SCROLL and VOL UP Key to SELECT
    4. Select Recovery
    5. The device will start up with Motorola logo and power up to a little Android man logo with Exclamation mark
    6. Press the VOL UP and VOL DOWN Key together at this screen
    7. The device will display BLUE Text on a Black background .
    8. Use the VOL DOWN Key to scroll DOWN and the POWER Key to SELECT the option desired .
    9. In this case , press the VOL DOWN key till the cache partition wipe is selected and press the POWER key to confirm the selection .
    10. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM .
    11. The device will then start performing the partition wipe
    12. Once the Formatting is complete , press the POWER key to confirm a REBOOT
    13. The message rebooting is displayed on the phone.
    14. The device will reboot and start the normal power up sequence .
    If you're still having the issue after this the next troubleshooting I can suggest is to perform factory reset. You can follow the instructions on how to reset your phone here https://motorola-global-portal.custhelp....

  • HP Color Laserjet Pro MFP M177fw going cool down mood after printing every pages.

    I have bought Color Laserjet Pro MFP M177fw before only 3days. From the very begining It says printing.... cooldown mood, and take a long paus. This issue occures after printing each page. I am using HP Toners. And my directly connected with wall socket(Electric).  Please help me. It is urgent for me. Thanks in advance.

    Afternoon , I found some information about the cool-down mode on your Laserjet Pro MFP M177fw. The product is too hot to continue printing at normal speed.
    The product will pause longer between printed pages until it cools down.
    Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.Other than using it in a well ventilated room, you could see if there are any firmware updates available. You can click on this link to Getting Printer Updates for HP LaserJet Pro. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options.  Thanks, 

  • HP Printer Assistant software always opens in full-screen mode

    Hi
    I have a large screen and it is just annoying that the HP Printer Assistant software opens in full screen mode and I have to make adjustments to the window to get it out of the way every time I open it. Does anyone have a solution ?
    Thanks
    Tony

    Hi @thowden,
    Welcome to the HP Forums!
    I am sorry to hear that your HP Printer Assistant software always opens in full-screen mode, but I am happy to look into this for you!
    For further assistance, I require some more information:
    The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
    Thank you for posting, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Am using provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down bef

    I  am using 2 unit provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down before continue to charge my iPad mini again. Of course it will be 100% charge but must make sure the AC charger is cool down completely. 
    I feel that the provided AC charger that is not suitable for our charging on iPad mini.

    I would book an appointment at an Apple Store, if you have one nearby, to have it looked at.
    Genius Bar: Preparing for Your Apple Store Appointment

  • My printer is stuck on shutting down mode.

    My printer has been in the shut down mode for the entire afternoon.

    Hi Needtoknow2. What is the model number of your printer? What type of computer are you using? Does this happen when you make a copy from the printer as well?
    <How Do I Find My Printer Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bud09626
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Epson R1800 always printing on draft mode HELP

    Since I installed 10.5 on my dual processor 2.5 Mgz g5, I have had nothing but trouble. One very annoying is that the. Print outs come out very light colored almost unreadable. Now I have to restart on 10.4 to get. A decent readable printout. I reinstalled that latest driver played around with color matching. But nothing seems to work. Any Thoughts?
    *I THINK IS PRINTING ON DRAFT MODE ALL THE TIME .HOW DO I TURN THAT MODE OFF?*
    thanks

    Since I installed 10.5 on my dual processor 2.5 Mgz g5, I have had nothing but trouble. One very annoying is that the. Print outs come out very light colored almost unreadable. Now I have to restart on 10.4 to get. A decent readable printout. I reinstalled that latest driver played around with color matching. But nothing seems to work. Any Thoughts?
    *I THINK IS PRINTING ON DRAFT MODE ALL THE TIME .HOW DO I TURN THAT MODE OFF?*
    thanks

  • HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

    my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

    Hello vijaypatel,
    Thanks for the question. The following article outlines the temperature warning that you experienced:
    iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
    http://support.apple.com/kb/HT2101
    If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

Maybe you are looking for