Always finding problem "server not find in safari"

Always finding problem "server not find in safari" for any redirection or even opening some sites through google.. Hv to delete cookies an still some times work some times no..pls do not give me ******** answer like apple for restarting wifi..its a serious issue and i think millions of users are finding this problem.. Apple should be forced to fix this issue through an update..or should come out with a or react solution..

It is not a broad issue, I have absolutely no problems using Safari and ios7.1 on many ipads.
Verify that you have good DNS entries, that can be a major cause of this type of message.

Similar Messages

"Safari Can't Find the Server" is chronic in Safari under Snow Leopard...

Since moving to Snow Leopard (or perhaps it is just an updated Safari in SL and otherwise not related to SL??) when my Mac starts up from sleep with Safari being already open, I typically find a blank message with "Safari Can't Find the Server"... And just clicking on pages, I sometimes get that same message. Sometimes I get the spinning gear (for way too long) and I've learned to stop it and just click the same link again and more often than not, it opens immediately the second time...
Any ideas??? Is this a bug that Apple needs to fix or do I need to do something to Safari (or something else) to fix this problem???
thanks... bob...

Robert Paris wrote:
Whoa... Now I'm really confused... When I go to my System Preferences, then Network, highlight Airport, then click on Advanced, then choose the DNS tab, all I see under DNS Servers is the internal IP address of my Apple Router (10.x.x.x).. And next to that under Search Domains is hsd1.ca.comcast.net... And that is all there is... And I didn't set any of that up... When I bought my Apple Extreme Router a couple years ago, I was so impressed because I came home, plugged it in, basically said "GO" and the router set it all up and just worked... And I'm pretty sure (though not positive) that the Router put the 10.x.x.x in that preference panel, in other words, pointed to itself for DNS services...
This is effectively saying that the DNS configured in the router will be the default.
So help me understand... If I change the DNS settings on the mac from 10.x.x.x to the OpenDNS values, the router would still have the Comcast values in it??? How does that work??? And if I only change them on my mac, then the rest of the computers on my home network would still be using the original Comcast DNS servers as established on the router, yes??? I mean I think that would have to be...
If you change your Mac, that is what it will use. Other computers will use whatever
they are configured to use.
See my confusion??? Again, I know only enough about Network settings to know that if I click a wrong button I could make a lot of trouble... So I don't move until I understand what at least a little more than clearly I know now...
So how do local (mac) settings for DNS play (or not) with DNS settings up at the router level???
The local settings should override anything else since that is what will
be used first. They have no interaction with what is at the router level.
thanks... bob..
Dave

Installer problems - Could not find the main class

Hello
I am trying to install openmq on vista and having problems. I've had the same problem with a nightly build of 4.3 and stable 4.2 build. The install kicks off fine until I get to the part where the install happens and then I get:
Java Virtual Machine Launcher : Could not find the main class. Program will exit
I have several sun JREs/JDKs installed and have tried all of them, the installer itself is not impacted:
jre 1.7.0
jdk 1.7.0
jre 1.6.0.7
jre 1.6.0.7 and jre 1.6.0.7
Am I missing something obvious or is there a way of installing without the java installer ?
Much obliged
Edited by: Alphawave on Oct 14, 2008 11:39 AM

Hi,
I've seen this error before on vista. In the past the users saw this message when they didn't have write permission on the directory they were installing to. Even with administrator privileges, they still need write permissions.
A quick test is to:
login as the user you are installing as.
cd to the directory you are installing into.
touch foo // to see if you can write to the dir.
Thanks.

Oracle Secure Backup Problem: could not find backup section record

Hi,
I am seeing an error when I try to restore a backup the restore job doesn't seem to be created. The errors I see are something like:
could not find backup section record for vol_vid(VOL000001) vol_oid(126) filenum(125) section(4) - object not found
And this causes the obsheduled (when attempting a restore) to exit giving the error:
Error: can't queue jobs - Connection reset by peer
with the log file (/opt/oracle/backup/admin/log/scheduler/log) showing:
2011/06/20.14:50:01 accepted and held restore job
2011/06/20.14:50:01 accepted and held restore job
2011/06/20.14:50:01 accepted and held restore job
2011/06/20.14:55:03 obscheduled version 10.3.0.3.0 (Solaris) -- Thu Aug 19 11:50:15 PDT 2010
Copyright (c) 1992, 2010, Oracle. All rights reserved. on dup pid 24021
2011/06/20.14:55:03 listening for requests on port 41422, interfaces:
2011/06/20.14:55:03 bge0 (::ffff:10.163.193.2)
2011/06/20.14:55:03 sppp0 (::ffff:192.168.131.2)
2011/06/20.14:55:03 Note: rekeying expired keys
2011/06/20.14:55:03 Note: now scheduling for 06/20
I have tested other earlier files on the same host and they seem to restore OK. Any help would be appriciated.
Thanks,
Will

Hi Fernando-- Why are you trying to manually start the apache daemons? It should not be necessary. By default the daemons should start by themself when you install as an adminhost. It appears from the information you sent that you are trying to restart them and they're already running. I would recommend that you stop and start OSB and then do an "https://<OSB admin hostname>" and you should be able to access OSB this way without any other intervention. Please let me know how it goes.
Judy

N95 8GB WLAN PROBLEM (SERVER NOT FOUND)

HI, just got my new n95 8gb and tried connecting it to my home network,i find the access point and define the access point but when i try start web browsing i get error mesage "server not found".
any ideas anyone?

That error message tells that your phone can't connect to a DNS. There are lots of causes for that & one is if your WIFI been configured with hardware address fitlering as a security measure. Try if you could put the primary DNS & Secondary in the configuration of your phone & check if it will work.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Finder search does not find all files

Hi,
I am doing a search in Finder and files missing from the results.
I am searching for "silverlight" in "This Mac" in the "File Name". The results give me one file "Silverlight.plugin" in the following folder "Macintosh HD/Library/Internet Plug-Ins".
However there is also another folder in "Macintosh HD/Library/Application Support/Microsoft" with name "Silverlight".
Also there is another folder in "Macintosh HD/Users/[USERNAME]/Library/Application Support/Microsoft" with name "Silverlight".
Why finder does not find in search these files/folders? Any idea?
Thanks

this happens because system files are not included in default finder searches. I'm not sure why it even found the first file. you may have started the search from inside the main library folder somewhere.
anyway, to include system files in a search do the following
in finder enter command+f to start a finder search. click on "Kind", hold the mouse button, scroll and click on "other". in the resulting popup select "system files" and include them in the search. then all instances of Silverlight will be found.

X-Serve not finding active directory

My X-Serve has begun to behave somewhat peculiarly.
I recently had SNow Leopard installed, and it had been working fine. I was deploying using deploy studio, it was all working fine. Then one day suddenly it just seems not to be able to find the active directory.
The AD is the PC network, I also can't connect to the internet. (And I've checked the proxies)
Also Server Admin has started throwing up errors saying it can't find the X-Serve... I'm a little confused as to why it can't find itself. Also the workstations now can't find the deploy studio server.
I can see the X-Serve remotely and operate it.
Any clues?
I've rebooted, I've fixed preferences, I'd update, but I can't get on the internet.

Just speaking to the loss of AD, If you are running Deep Freeze you may need to run a command that sets passinterval to 0.
http://www.mikespike.org/2008/08/12/osx-leopard-deep-freeze-and-active-directory -oh-my

Server not finding image files

I built a simple, blank page and placed 8 photos.
Since this is not part of the site, I exported the site as HTML files and uploaded them to the server.
This is what I did with the home page and photos and it's fine.
However, this page won't load. I can see that the page is there... there are the placeholders for the
photos, but no photos. I've copied over the CSS list and still nothing. I've take the photos out of
their original folder - where they were when i placed them - and still nothing. If I Preview in Browser
in Muse, the photos are there. If I open the HTML page in Safari, the photos are there. But if I put them
on the server, the go to that page in Safari, they are not. I'm stumped.

The complete folder structure exported by Muse has to be uploaded to your server (with no changes).

Motorola K1m/L7c iSync Problems Can not find device USB & Bluetooth

USB Bus recognizes our new Verizon cell phone. We selected phone based on Apple's Compatibility chart listing this phone as compatible with iSync. We have had NO luck in getting iSync to recognize the existance of this phone using USB. When setting up Bluetooth, the system sees the phone - but will not connect to it. What is wrong? Using Mac OS X Version 10.4.9 and iSync version 2.4 (501.2)
This problem is the same on both of our laptops.

Try Windows 8 drivers from Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for your specific Mac.
Also, on the OSX side look in About This Mac -> More Info -> System Report -> Bluetooth and post the hardware information so non-Apple drivers can also be located/tested.

List server not finding group recipients (Server 4.0.3)

We cannot send emails to group members:
Group members themselves can receive email OK individually from the internet thank goodness. But ...in OS X Server
The Groups' "Mailing Lists" boxes are now empty. Even "Workgroup" lists all the users but no "Mailing List" now.
Newly re-adding a mailing list name to an existing (listless) Group does notget email to the Group's members, though. The List Server log says :no recipients for <mail list name>" when it receives a group email even though it's received if for the newly added mailing list name. And next:... list_server_agent[6025] <Error>: no recipients for message-id=1420584145.....
Creating a new group fills the "Mailing Lists" box with an assortment of crazy mailing list names ...
This is probably going to be yet another crazy error in the way that the List Server uses LDAP / OD I expect ... or LDAP getting corrupted possibly after upgrading to Server 4.0.3 when we first noticed this. Oh dear ... this is all we need right now ... just as we were beginning to restore our faith in the gradually improving OS X Server.
We don't have a very recent OD Archive (wouldn't be too much trouble to update from it, though) and if I had any faith that restoring from it would solve the problem I would do so.
Any advice gratefully considered!

It's just seemingly broken.
(pardon the double-post)
I have a fresh install of OS X Server 4.1 with the former directory users imported. Facing the same issue as everyone else.
I noticed in /Library/Server/Mail/Config/MailServicesOther.plist, you can enable debug logging for the list server:
<key>list_server</key>
<dict>
<key>dest_domain</key>
<string>example.com</string>
<key>list_server_log_level</key>
<string>debug</string>
Bizarrely, when I now send a message, the list server even lists the members, and then says no members found:
May 3 13:01:06 server.example.com list_server_agent[12758] <Debug>: initalized recipient cache: marketing
May 3 13:01:06 server.example.com list_server_agent[12758] <Debug>: expanding group: marketing
May 3 13:01:06 server.example.com list_server_agent[12758] <Debug>: fetching nested groups within: marketing
May 3 13:01:06 server.example.com list_server_agent[12758] <Debug>: carlee is member of mail SACL
May 3 13:01:06 server.example.com list_server_agent[12758] <Debug>: sophie is member of mail SACL
May 3 13:01:06 server.example.com list_server_agent[12758] <Debug>: jaimee is member of mail SACL
May 3 13:01:06 server.example.com list_server_agent[12758] <Error>: no recipients for: marketing
This makes no sense at all. I have no SACL's set for Mail, or any other service in case anyone's curious.

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

WebKit/GTK problem - gcc not finding function

If I attempt to compile a little program I'm working on, this happens:
20:20:41 /home/barrucadu/tmp/misc % gcc gtk.cpp -o gtk.o `pkg-config --cflags --libs gtk+-2.0` -I/usr/include/webkit-1.0 -I/usr/include/libsoup-2.4
/tmp/ccx65jx1.o: In function `main':
gtk.cpp:(.text+0x7f): undefined reference to `webkit_web_view_new'
/tmp/ccx65jx1.o:(.eh_frame+0x12): undefined reference to `__gxx_personality_v0'
collect2: ld returned 1 exit status
Here's any possibly relevant information:
20:20:56 /home/barrucadu/tmp/misc % pkg-config --cflags --libs gtk+-2.0
-I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lglib-2.0
20:22:31 /home/barrucadu/tmp/misc % grep webkit_web_view_new /usr/include/webkit-1.0/webkit/webkitwebview.h
webkit_web_view_new (void);
And here is the code:
#include <gtk/gtk.h>
#include <webkit/webkitwebview.h>
/* Called when the window manager sends the delete signal. Returning true ignores the signal. */
static gboolean delete_event(GtkWidget *widget,
GdkEvent *event,
gpointer data)
return false;
/* Called when the main window is destroyed. Stops the GTK loop and so ends the program. */
static void destroy(GtkWidget *widget,
gpointer data)
gtk_main_quit();
/* The main function. Return number indicates success or error. */
int main(int argc,
char *argv[])
gtk_init(&argc, &argv);
/* Create a new window and set some attributes. */
GtkWidget *window;
window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
gtk_container_set_border_width(GTK_CONTAINER (window), 10);
gtk_window_set_title(GTK_WINDOW (window), "Foo");
/* Create a new webkit instance and add it to the window. */
GtkWidget *webview;
webview = webkit_web_view_new();
/* Attach two signals to the window, delete and destroy. */
g_signal_connect(G_OBJECT (window), "delete_event",
G_CALLBACK (delete_event), NULL);
g_signal_connect(G_OBJECT (window), "destroy",
G_CALLBACK (destroy), NULL);
/* Show the window and start the main GTK loop. */
gtk_widget_show (window);
gtk_main();
return 0;

Barrucadu wrote:
If I attempt to compile a little program I'm working on, this happens:
20:20:41 /home/barrucadu/tmp/misc % gcc gtk.cpp -o gtk.o `pkg-config --cflags --libs gtk+-2.0` -I/usr/include/webkit-1.0 -I/usr/include/libsoup-2.4
/tmp/ccx65jx1.o:(.eh_frame+0x12): undefined reference to `__gxx_personality_v0'
collect2: ld returned 1 exit status
GCC is used to compile C language source files. In order to compile C++ source you want to use g++, which will resolve your second error.

Initialization problem server not starting

Hi,
Could anyone tell me what I'm doing wrong.
If I start wl using the default startweblogic.cmd script everything is ok.
If I use an amended cmd file to start wl from say c:\bea then I get the
following:
The WebLogic Server did not start up properly.
Exception raised: weblogic.management.configuration.ConfigurationException:
XmlRepository directory .\config does not exist
weblogic.management.configuration.ConfigurationException: XmlRepository
directory .\config does not exist
at
weblogic.management.internal.xml.XmlFileRepository.setDirectories(XmlFileRep
ository.java:81)
at
weblogic.management.AdminServer.initializeRepositories(AdminServer.java:202)
at
weblogic.management.AdminServer.configureFromRepository(AdminServer.java:178
at weblogic.management.AdminServer.configure(AdminServer.java:168)
at weblogic.management.Admin.initialize(Admin.java:207)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:317)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception

Please provide more information. The server logs woudl help for starters.

Java server page compiler can not find a class defined in a java bean file

I have a jsp file using java bean. The java bean class file is uploaded into the server and also the directory to this java bean .class file is included in the Unix environment CLASSPATH. This .jsp file is registered and should be compiled and excecuted automatically.
WHen I try to invoke this .jsp file, the jsp compiler error, saying the class defined by java bean can not be found. I already include this path in teh CLASSPATH, I thought the jsp compiler will go to the right place according to CLASSPATH to find the referenced class.
Can anyone tell me what I have done wrong or what should I do in order to allow jsp compiler to find the class refrenced by .jsp file and defined by java bean file?
Thank you so much

hello friends,
i am also facing the same problem of not finding bean class files for both jsp and servlet though it is placed in same package. the problem of not finding bean class file for jsp is experienced in Tomcat server only whereas in Blazix, there is no such error and the file is compiled and runs successfully.
i have checked Tomcat properly. there is no error in its configuration also servlets without the use of bean files run successfully. so please can anybody guide me about what is the problem and how to solve it. plz its urgent .

I keep getting the following error "server not found.....firefox can't find the server at http." when I try to log on to one certain website.

I was able to access this website prior to 2 weeks ago. I can access this website on other computers without issues, and I can also access all other websites on this computer.
The following is what is listed in the navigation bar when I get the error message.
http://iphantom.com/wisd/restricted.html?fn=Default&FP=l&ip=10.201.5157&ibip=66.206.97.9&ldu=l&re=0&bu=wps.prenhall.com
I noticed it says wisd/restricted, but I can log on to this website using my wisd computer without issue, and I get the same error message at my home/other locations. So I know that it is not restricted. I have used all the other suggestions "no proxy", shut down firewalls, but nothing has worked.
Any help with this matter will be greatly appreciated.
Thank you,
Cody

go through this
[[Server Not Found - Troubleshoot connection problems|Server Not Found - Troubleshoot connection problems]]

Always finding problem "server not find in safari"

Similar Messages

Maybe you are looking for