Always getting syntax error when using RANK formula. Please help!!

i am desperate! tried EVERYTHING. so as a last try, I tested the very same Example that Apple gives to elaborate how the "RANK" formula works...and you guessed it....NOT WORKING.
not even a reconstruction 1 to 1 of the apple example worked, giving me a syntax error.
thus i am assuming that i am doing something wrong on a very basic level i would have never thought of (maybe a setting i have wrong?, maybe if you have blue as background formulas don't work?).
i would be sooooo grateful for any help!!!

Thank you very much for answering this quickly.
but unfortunately it doesnt work
i made some screenshots, maybe this way someone sees a maybe obvious mistake i am making
and
Message was edited by: Apolloss

Similar Messages

  • I always get an ERROR when I import avi videos in After Effects !!

    Hi There
    As I said in the title ,,
    I always get an error when I import an (avi) video into After Effects CS5.5 ,,
    and I don't Know why ,
    in other hand I can open the same video I imported it in many media programs like : Windows Media Player-Quike Time-Windows Media Center- Real Player ,, except After Effect !
    Although the same Program I used before Formatting the computer ,, but after Formatting the Projects file for Adobe After Effect didn't Open as well !!
    The Picture I attached shows the Error ,,
    Note:
    the question marks in the pictures are for the Arabic name of the avi video ,,and this version of Adobe After Effect CS5.5 is trail ,,
    I hope to find a solution for my problem ,,
    and I'll Be Thankful

    It worked , both what you said worked ,,
    First I placed them on the desktop ,
    Second I changed the names of the videos ,,
    and both of them worked ,,
    thanks a lot for your help ,
    Mr. TimeRemapper & Mr. Mylenium
    have a good day

  • Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

    Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

    Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.  

  • Getting Compilation error when used SET or MULTISET operator on nested tabl

    Dear All,
    I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
    This is working fine in other DB installations of 10g but does not work in another 10g DB.
    it says "wrong number of parameter or datatype used in SET"
    Can any one suggest what went wrong here?
    Thanks in advance.

    Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
    Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response.

  • I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    May depend on which version of iPhoto you have installed.
    Check out this thread >   https://discussions.apple.com/message/15324917#15324917

  • HT201210 my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod

    my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod.

    You can try putting the iPod into DFU mode and see if that will let you restore and remove the jailbreak:
    http://www.iclarified.com/entry/index.php?enid=1034
    Some jailbreaks cannot be removed and in some cases will permanently disable your iPod. If that happens to you, then you will have to buy a new iPod; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPod.
    You're on your own from here. We can provide no further help with a jailbroken iPod in these forums.
    Good luck.

  • The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    If you want to get a little more "exotic" you can try remapping the function keys.  I did a little google searching and the hits that looked promising are,
    Mapping volume and eject keys to 3rd-party keyboard Other Hardware
    Spark
    Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
    You can also export and import your Hot Keys library, or save it in HTML format to print it.
    Spark is free, so use it without moderation!

  • I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page

    i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

    Contact Apple support for warranty service.

  • I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8.  I tried to reinstall but it won't work. I get an error message each time. Please help!!!!!!!!!!!!!!

    I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8.  I tried to reinstall but it won't work. This has never happened before.  I get an error message each time. Please help!!!!!!!!!!!!!!  I don't have time machine. 

    By Toolbar, do you mean the Dock?  The Translucent bar normally at the bottom of the screen, but sometimes at the right or left side?
    If that's what you mean, the Dock is merely a shortcut to what is already inside the Applications folder's Microsoft Office 2011 folder.  If you have Word inside your Microsoft Office 2011 folder, you can drag it back to the Dock.
    If you deleted the Microsoft Office folder, or it is empty, you'll have to reinstall it. 
    If you don't have your registration code, you'll have to call Microsoft for a new one.

  • Syntax Error when using SQL Expression

    Morning all,
    When I try to type any SQL Expression within Crystal I am getting syntax errors, even when I type only SELECT {field name} FROM {table name}.
    Here is the query I did which gave me the following error:
    Query
    SELECT  order_progress . date_created
    FROM order_progress
    WHERE  order_progress . order_no = order_header . order_no
    AND  order_progress . order_status =77
    ORDER BY  order_progress . date_created DESC
    Error
    Error in compiliing SQL Expression
    Database connector Error: 'HY000[Informix] [Informix ODBC Driver]General Error. Syntax Error[Database Vendor Code-11060]'.
    Now this means, 1: I am getting a connection error with my db, for no apperent reason. 2: my syntax is not approved?!
    Can someone explain why is this happening and how to resolve this?
    many thanks
    Kind Regards
    Jehanzeb

    Morning Kyle,
    Thanks for the informative answer, I have found out the formula which counts number of days however, I am not sure what you meant by the following:
    >
    Kyle McAdam wrote:
    > create a formula that does the datediff....this will be a group.
    Done this, it counts the working days as in weekdays and takes bank holidays out as well
    here is the formula:
    WhileReadingRecords;
    //{order_progress.order_status}= 77;
    //{order_header.order_status}>=77;
    Local DateVar Start := {order_header.date_entered};   // Starting Date
    Local DateVar End := {order_header.act_despatch};  // Ending Date
    Local NumberVar Weeks;
    Local NumberVar Days;
    Local Numbervar Hol;
    DateVar Array Holidays;
    Weeks:= (Truncate (End - dayofWeek(End) + 1
    - (Start - dayofWeek(Start) + 1)) /7 ) * 5;
    Days := DayOfWeek(End) - DayOfWeek(Start) + 1 +
    (if DayOfWeek(Start) = 1 then -1 else 0)  +
    (if DayOfWeek(End) = 7 then -1 else 0);  
    Local NumberVar i;
    For i := 1 to Count (Holidays)
    do (if DayOfWeek ( Holidays<i>) in 2 to 6 and
      Holidays<i> in start to end then Hol:=Hol+1 );
    Weeks + Days - Hol;
    You will then have a formula field that is evaluated to 1, if the status is 77.
    you mean second formula? How I used,
    If Order_header.Order_Status=77 then
    1
    else
    2;
    however this doesn't seem to be working.
    > Now, sum that formula in each group footer. Suppress the detail lines...
    which formula to sum up?
    > **Don't use a cross tab with this solution. For a cross tab, you would have to calculate the totals in a different manner.
    so far I used Cross tab and it is showing the right days, however not showing the correct jobs per day.
    You might be right there that it calculates the totals differently, additionally how am I suppose to get the right Percentage if using the Cross tab. The percentage should be, count of number of jobs % Total jobs.
    hence:
    {#NumofJobs} % {#Total_Jobs}
    however, when I create this formula it does not let me add that into the cross tab.
    I also need to put a subreport in my report, can I use Crosstab to contain a link to my subreport?
    Many thanks
    Kind Regards
    Jehanzeb

  • Getting an error when using fm 'excel_ole_standard_dat'

    Hi All,
    I am getting an error when trying to generate an excel file with the data in the internal table using fm 'Excel_ole_standard_dat'.
    can anybody help me in this.
    Thankyou,
    Prasanna

    Hi Prasanna
    Could you tell me what's the sy-subrc code you are getting ?
    Pushpraj

  • Get 8004 error when using copy past command transferring pictures from one USB drive to another, why ?

    Why do I get 8004 error, when I use copy past command to transfer pictures from one USB drive to another ?
    There is no problem if the second drive is empty.

    mumbles27 wrote:
    one is MS-DOS
    would that be in FAT32 or NTFS ?
    mac OS extended (case sensitive)
    i'm not 100 % sure but i have a fancy such a combination may not play well together.
    nothing bigger than 2GB for one file
    i was asking because FAT3 has a limitation in that it will not allow you to copy files larger than 4 GB.
    JGG

  • I am trying to intall iTunes for the first time on my computer/ windows 8. I can get through the installer, then at the end, i'm getting an error: 0x80071A3F ??? Please Help

    I am trying to intall iTunes for the first time on my computer/ windows 8. I can get through the installer, then at the end, i'm getting an error: 0x80071A3F ??? Please Help

    Hey 78463,
    Welcome to Apple Support Communities! I didn't see that particular error message in any documentation, but issues installing iTunes are resolved a majority of the time by completing the troubleshooting steps in the following article:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers,
    David

  • Getting syntax error when i using INSERT command

    Hi,
    i am using MS Access DB. Table name is "Timesheet". the table has the following Fields,
    uname - Text
    date - Text
    intime - Text
    outtime - Text
    duration - Text
    desc - Text
    i am using preparedStatment,
    String accessDBURLPrefix = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
    String accessDBURLSuffix = ";DriverID=22;READONLY=false}";
    String filename="D:\\TimeSheet\\TimeDB.mdb"
    String databaseURL = accessDBURLPrefix + filename + accessDBURLSuffix;
    Connection con = DriverManager.getConnection(databaseURL);
    PreparedStatment st = con.prepareStatement("INSERT INTO (uname, date, intime) TimeSheet VALUES (?,?,?)");
    st.setString(1,user);
    st.setString(2,date);
    st.setString(3,intime);
    st.executeUpdate();
    }if i am going to compile this code i will get SQLException
    java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
         at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6958)
         at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7115)
         at sun.jdbc.odbc.JdbcOdbc.SQLExecute(JdbcOdbc.java:3150)
         at sun.jdbc.odbc.JdbcOdbcPreparedStatement.execute(JdbcOdbcPreparedStatement.java:214)
         at sun.jdbc.odbc.JdbcOdbcPreparedStatement.executeUpdate(JdbcOdbcPreparedStatement.java:136)
         at TimeSheetDemo.writeToDB(TimeSheetDemo.java:84)
         at TimeSheetDemo.main(TimeSheetDemo.java:37)
    Really i have tired to figure out this problem. please help me anyone.
    thank you

    Thank you. it was my careless mistake. i changed that mistake. but still it is not working, get same exception.
    st = con.prepareStatement("INSERT INTO  TimeSheet (uname, date, intime) VALUES (?,?,?)");suppose, if i will give values for all fields, it will work fine, example
    st = con.prepareStatement("INSERT INTO  TimeSheet  VALUES (?,?,?,?,?,?)");
    st.setString(1,user);
    st.setString(2,date);
    st.setString(3,intime);
    st.setString(4,outtime);
    st.setString(5,duration);
    st.setString(6,descrip);
    st.executeUpdate();But my problem is i want to insert the values for only 3 fields.
    give me the solution for inserting values for specified fields

  • HELP ME!!! I always get an error when clicking the activation link!!!!

    Hi, friends,
    please help me
    I got the email containing the activation code, when I follow the instructions, by clicking the activation link in the email, logining with my AppleID, I got an error:
    We are unable to process your request.
    Please go back to the previous page, or quit your browser and try your request again.
    If you require assistance, please contact ADC support.
    I tried both in IE7(windows) and Safari(Mac), neither can work, always get the same error.
    What is that? Can anybody help me? I have posted message to Apple Contact, but no response by now,
    I need fix this ASAP!!, Is the error from my side or from the apple side? thanks

    I would recommend calling them directly: http://developer.apple.com/contact/phone.html

Maybe you are looking for