Always have to restart router and modem.

I don't think this actually is the airport's fault and this only happens at my house, but maybe someone would know.
I have airport extremes in my G5 and ibook, and a linksys broadband modem, and a motorola router. if i restart my computers or the computers go to sleep i always have to unplug the modem and router to reset them; then the internet finally works. The only place i ever have to do this is my house, it always automatically works anywhere else. Anyone know what could be causing this?

when i first turn on the computer, or wake it up from sleeping the airport wireless recognizes my wireless connection but can't connect to the internet. when i unplug the router and modem i unplug it, wait about 10 seconds then plug it back in. after doing this my internet works fine for as long as the computer stays on. if i turn it off, or put it to sleep again, however, then i must unplug the router and modem again. i don't know why unplugging it works, but i was hoping maybe someone knew what i could do to have it just work automatically.

Similar Messages

Issue with Linksys Router and Modem with Vonage Device

Hello,
I have a Linksys Router and Cable Modem. Plus I have Vonage for my home phone. I have been having several problems and now, my Vonage phone will not work at all. I have cable internet and my ISP is Cox Commuication. I do not know how to connect my Vonage device with my Router and Modem. People have been giving me advice, but nothing has worked.
Does anyone know how to intergrate all three of these items together? Basically which plug goes where. Currently my phone is not working. The only thing that is in use right now is my linksys cable modem. I have the power cord plugged in, the blue cord from the modem plugged into my laptop, and the cable from the modem to the wall jack. Please help. Thank-You!
Linksys Router: WRT54G version 6
Linksys Cable Modem: BEFCMU10
Vonage (Motorola): VT2143-VD
Message Edited by preshe79 on 03-16-2008 03:56 PM
Message Edited by preshe79 on 03-16-2008 03:58 PM

The router should be online first. Can you get into the router's configuration page?
The box said windows xp or better... So I installed Linux!

Help I have a BEFW11S4 router and my labtop wont connect...

Help I have a BEFW11S4 router and my labtop wont connect to the internet but my desk top is connected. I called for Tech. support and they wanna charge me $30 to tell me to go to a website to reset settings. I am not paying $30 thats insane just for tech. support.
Info:
All the lights on my router & modem are solid green.
My desk top is connected.
How to I connect my laptop? any suggestions.
they usually send you to the 192.168.1.1 or something similar. I forget how to ping also so I couldn't check that.
(Mod Note: Edited for guideline compliance. Thanks!)
Message Edited by Maximus on 10-08-2007 06:40 PM

I changed the channels mine was set on 6 when I went into setup. My internet connection is set to PPPoE It didnt say anything that said " beacon interval" or "RTS and Fragmentation threshold" where would I find that at??
Anyway my wireless computer can connect online with excellent strength but my desktop will not connect. I disconnected the router and pluged the computer into the modemn and I had internet access although my signal was not great. All my lights are solid.
Should I bite the bullet and just go get a new router??

Ok i need lots of help here... i have a WRT54G router and...

ok i need lots of help here... i have a WRT54G router and trying to hard wire a computer to it and wirelessly connect to a laptop... i have dsl internet connection... the power light is blinking constintly and when i try to setup the router the default password doesnt work already tried to reset the router and that didnt help... any thoughts> thanks

the power led blinking all the time can be caused by a corrupt firmware, or a defective power adapter, try doing a hard reset, you may need to do it a couple of times, and then power down both the modem and router.
after a couple minutes, power up the modem, wait for the link led lights up, then power up the router and look for it to link up with the modem, at this time the power led on the router should be on solid if all is ok.
if it still don't light solid, you may need to do a firmware update, or the router is defective.

I am trying to open iBook on my iPhone 5s with iOS 8.2, iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?

I am trying to open iBook on my iPhone 5s with iOS 8.2, when it opens I have a white screen for a few minutes, then iBook closes. I have tried restarting iBook, and the phone, but it still happens, any suggestions?

do a reset: hold the power and home buttons simultaneously until the Apple logo appears.

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

TS1286 My iPod touch isn't appearing in the itunes menu. I have tried restarting it and I have all the latest updates, what shall I do?

My iPod touch isn't appearing in the itunes menu. I have tried restarting it and I have the latest software, what shall I do?

Have yu looked here:
iOS: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

My Mac Book Pro runs hot and then freezes up I have to restart it and keep it cool with a fan

My MacBook Pro runs hot and then freezes up, I have to restart it and keep it cool with a fan on the battery

Runaway applications can shorten battery runtime, affect performance, and increase heat and fan acti…
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

I havea WRT350N Wireless Router and the DynDNS Service is...

I havea WRT350N Wireless Router and the DynDNS Service is not
resolving the correct Internet IP Address, is resolving to a local IP and
I see it on the DDNS Page on my Router Setup Screen. I'm
trying to connect to my DVR from a Remote Site with my DynDNS
Client in my computer but I could not do it. Port 80 (my DVR WAN
Port) is Open and redirected to my DVR local IP, my DynDNS Account
is working fine but theres no way that I could access my DVR or even
my Router if I activate the Remote Management Capabilities.

The best source to ask is HughesNet. According to their web site the HNS7000S is a router. Instructions how to set up a home network can be found here.
I cannot find instructions how to set up DDNS on the HN70000S router. The suggested setup in the KB article link above won't help you with that either. I don't know whether it is possible with HughesNet to put the router into bridge mode and set up the WRT for internet. It may not be possible at all. But you have to check with HughesNet.

Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.

Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.

iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398

Is it possible to save keynotes on a central place so that multople users on mac/ipad.iphon can always have the latest version and edit this ?

Is it possible to save keynotes on a central place so that multople users on mac/ipad.iphon can always have the latest version and edit this ?

If you mean saving the project files; iCloud, Dropbox, Skydrive will do this.
If you mean the application, then definitely not possible.

I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

I am still getting redirected to various web sites when using Safari. My PC is not affected but my I phone and I pad are. I have reset my router and changed my admin name and password. I am still being redirected.

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

TS2972 have to restart Itunes and computer several times before apple tv will connect...do i need to reinstall itunes?

have to restart Itunes and computer several times before apple tv will connect...do i need to reinstall itunes?

It is quite possible to have a different iCLoud AppleID from the iTunes one - have you set up maybe Phot Stream using an non-iTunes AppleID?

My iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?

my iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?

Try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Always have to restart router and modem.

Similar Messages

Maybe you are looking for