Always have use windows to configure wireless connection

after using the one button setup on my router, I now have to go to the advanced settings to use windows to configure wireless settings. Every time I reboot the computer I have to recheck the box in advance settings.

the advantage in using the built-in utility is that you dont need to worry everytime you reboot your pc...the problem in using your xp utility is that just like in your case you always need to restart wzc configure on your pc which is very inconvient for any user...make sure that built-in utility is configured properly...

Similar Messages

  • Can you use Iphone hotspot to wirelessly connect to apple TV

    Can you use Iphone hotspot to wirelessly connect to apple TV.  ie I have no router but am interested in playing music from phone to apple TV.

    Yes in theory, though do check your phone contract small print and keep an eye on your data usage - in theory local data sent across the LAN created by the hotspot should not use 3G data but some carriers seem to treat it as internet data usage.
    AC

  • I have used windows live mail for over a year worked fine. Now it has stopped working?

    I have used windows live mail on my mac for over a year worked fine. Now it has stopped working?

    Hello Edwards
    For issues with sending a receiving email on your Mac, then check out the article below to help resolve it. You will first want to check out the Connection Doctor to see what errors you are getting when it comes to sending and receiving email and then look to correcting any errors that may come up.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Regards,
    -Norm G.

  • What do I have  to buy for a wireless connection?

    I have got a ADSL Broadband connection to the Internet from my ISP, [UK Online] that has a Cable to my DrayTek, Vigor2500v Router.
    My router is not wireless. I have a Ethernet cable connected from the router to my G4 iBook, 800MHz. My iBook is AirPort Extreme ready and is without the AirPort Extreme Card. What is the different between AirPort Express and AirPort Extreme?
    How can I make my G4 iBook have a wireless connection to the Internet? What do I have to buy for a wireless connection?
    G4 iBook   Mac OS X (10.3.9)   800MHz; AirPort Extreme ready; 256Mb;

    Thanks for your Info, I do understand that I need to buy a “AirPort Extreme card” & “AirPort Express/Extreme base station”.
    I have my current Router wired by a Ethernet cable to my G4 Desktop, also have a VoIP connection from my router. So, I want to keep this router and add the “AirPort Express/Extreme base station” to have the wireless connection to a iBook only.
    If I understand you correctly, I can disabled the DHCP server on the “AirPort Express/Extreme base station” only, Because I need the DHCP for the connection to my G4 Desktop. Is this what you mean?

  • I have used the Apple Configurator to add my iPhone and AppleTV to the corporate network but some services do not work.

    Hi,
    Thanks in advance to anyone that can offer support.
    I have used the Apple Configurator to add a profile to both my iPhone 5 and AppleTV (both with latest OS) to enable them to be on our corporate network.
    I can now airplay from my Mac to the TV and my iPhone to the TV.
    The phone can access the internet fine and the AppleTV can access YouTube and Photo Stream without any issues.
    THE PROBLEM: The AppleTV cannot access the iTunes Store and the iPhone cannot get e-mail (either from Exchange server or from iCloud (or Gmail).
    Thanks again for any support in rectifying the issue.
    Tim

    Yes, it's pretty much the same with photos, you can't save them to iCloud. Again you're better using something like dropbox.
    There is a photo feature with iCloud call photo stream, however it only saves your most recent photos, 1,000 and your last 30 days.

  • Tecra A2 -Use windows to configure my wireless network settings.

    I have this option ticked, but frequently during the day the box becomes unticked and I loose settings. Once ticked again all Ok. Anybody else having this problem and found a remedy?

    Hi
    I had such issue with the Windows Wlan configuration but only because I used an Intel ProSet Utility together with the Windows own option.
    If the Intel ProSet Utility has started then the windows option has been disabled because the Intel ProSet Utility undertook the Wlan configuration
    I think you should check if some 3rd party WLan tools are not loaded in the background

  • I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting,  and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

    I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed  Window 7  32 bit).  automatic software driver is not deducting,  and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
    I did install itunes and update also. but the above problem still same.
    Kindly give me solution of it. awaiting.
    Regards
    Abbas Kader

    try it with another computer to check if it shows up
    if so
    uninstall all apple software
    reboot
    use regedit to search and remove all itunes keys
    reboot
    resinstall apple software
    if non of that helps then try another cable
    if that don't help could be your phones connector is damaged

  • Can't configure Wireless Connection to HP OfficeJet Pro L7780

    I recently purchased both my iMac 24" 2.8GHz computer with OS x 10.5.2 and HP OfficeJet Pro L7780. I was able to use the HP setup CDs for my Windows laptops and configured them to use the printer in a wireless configuration.
    The iMac is creating the headache (actually I think it's HP causing the headache). When I try to install HP's driver 9.7.1 using their utility, it is unable to detect the L7780 in a wireless configuration. The moment I connect via USB or wired Ethernet, the printer is detected without a problem. My printer is located @ 192.168.1.30, fixed IP address via a NetGear FSW308 switch. My iMac is fixed @ 192.168.1.100 and the gateway is 192.168.1.1
    I spent hours on the phone with HP support and am still in the same spot... HP software won't find the printer when it is wireless. I can configure OS x 10.5.2 to use the internal L7700 series driver and put the IP address in the dialog box. The printer prints without issue using the OS printer drivers, but the other features such as scan and fax will not work without the HP software.
    I can ping the printer and I can connect to the printer's EWS, but the HP software will not find the software.
    Overall config: iMac wireless network connection to switch; Printer also wireless connection to switch.
    So far HP is dumbfounded and all they can say is that I should call Apple because the printer software works fine when I connect the Ethernet or USB cables.
    HELP!
    Thanks,
    Roland

    Thank you for the thought. Yes, although my SSID is public, I have a WEP 128-bit security key. The printer, the iMac and my Windows laptops all connect to the wireless network without issue, as evidenced by my Windows laptops and iMac (if I use the driver included with OS X 10.5.2).
    I can ping the printer from the iMac as well as connect to the printer's web interface, so connectivity exists. It is as if the setup software or the printer are trying to communicate using a port that or service that OS X may be blocking.
    My OS X firewall is configured to accept all connections though... so that shouldn't be the issue unless there is a bug in accepting all connections.
    Thanks,
    Roland

  • How to use both wired and wireless connection with static addresses

    Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
    I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
    The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

    If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
    If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
    On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

  • Can two WRT610N routers be used to create a wireless connection between switches?

    I am getting somewhat lost in the jargon involved with routers and access points and need better understanding of the functionality of the WRT610N router. The questions I need answered are:
    To eliminate the need for WUSB600N USB adapters for each of the happily switched office computers: can I use two WRT610N routers to connect one end of the building to the other without wires in between? One end has the switched LAN the other has the internet connection.
    If this is not the highest bandwidth solution... what is?
    Sorry to go off topic but, whether the above is feasable or not, can I establish more than one wireless network - one internal and one for guests - using a WRT610N router?

    Firstly thank you for your interest
    It is not possible to connect the two parts of our network with a physical connection such as a wire. The goal is therefore to wirelessly join one end of the building to another with as much bandwidth as possible. I am hoping to use high end dual band N equipment. However as linksys does not seem to have an access point which - with my limited understanding - suspect I could connect to an existing gigabit switch. I wish to know if a router can be configured to slave itself to the internet connected router.
    One end of the building has the internet and a reception room workstaion, the other end currently has 3 computers and a NAS which need to be connected to the internet and each other, as efficiently as possible. I am concerned that USB adapters for each computer would drain workstation resources and be quite expensive.
     I am pleased with every aspect of the WRT610N as a router but need guidance as to how to best deal with the other end of the building.
    Furthermore I would like to provide a separate independent wireless network for guests to access the internet. Can one dual band router produce two networks? One for internal use only - secured against the outside world and a separate network for guests. If not can a/the second router pull this off?
    Does this explain more?
    Thank you for any assistance

  • How can I always have popup windows appear on the same screen as PS?

    Hi,
    I'm hoping someone can help me out. I have 3 displays connected to my computer, 1 of which is a tablet screen I don't use all the time. (It gets disabled and put away when I turn on SLI for video gaming, or if I just dont need to draw anything at the moment)
    If I'm drawing something, I'll drag photoshop over to that 3rd screen and do my work. Later, if I want to just crop or resize an image or do simple image manip stuff, I'll drag the window back over to one of my other two screens. The problem I'm facing is that popup dialogs like the open file, save as, preferences; any new window that photoshop opens, appears on whatever monitor it did last time.
    Is there a way to force photoshop to always show those windows centered or at least on the same screen the rest of the program is working on? I've been searching for a while and the closest thing I found was a setting called 'Remember Palette Locations', but it looks like that setting was removed in CS5.
    I'm willing to change preferences, run some kind of reset script any time photoshop starts, or whatever, just something that will bring those new windows onto the screen I'm working on instead of where they last were. I sat perplexed for about 1 minute when I saved a picture as PNG. Went to upload it and.. ohp! it hasn't changed! Oh! There is an interlace option dialog is showing on a screen thats TURNED OFF >_>
    Computer info:
    2x 24" DELL Monitors (main screens)
    1x 19" Yiynova Tablet Dispay (used only when drawing)
    2x Nvidia GTX 560Ti Graphics Cards
    Windows 7 64bit
    Adobe Production Premium CS5.5
    Message was edited by: Barrakoda - Added computer info

    Your graphics driver's dialog repositioning option? Check that.
    Mylenium

  • Windows 7 ultimate wireless connection to hp deskjet 6988 working except no printing both sides

    I have new computer with windows 7 ultimate.  I have HP Deskjet 6988 printer with wireless connectivity.  I can print but cannot print double sided documents except by doing so manually.  Any solution?

    Hi Onemangosta,
    I would like to help with the garbled text you are experiencing. I have found a great document for you to use and I can also help you with the firmware update.
    Troubleshoot text that might be gibberish, nonsense, or look garbled or scrambled
    In order to update the firmware on your printer ensure the printer is on the wireless network and touch the Web Services icon (this icon is the 1st of the 4 that run across the top of the front panel - looks like 2 little cell phones). Scroll through the Web Services menu, find and select Product Updates, select Check for Product Updates.
    If the printer is already up to date the front panel will say so, if it is not, the download and install will begin. It is possible you were unable to do the update form the computer because the printer does not need an update. The HP Device Updater will only see a printer that requires the update.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I have a WRT54GC, and our wireless connection to the x360 is lost anytime we turn off the PC.

    I have a WRT54GC that is hooked properly to the cable modem (adelphia) according to all literature... but, our wireless connection to the x360 is lost anytime we turn off the PC, which shouldn't happen. The router is connected directly to the motor. modem. We can be on line on with the pc and x360 at the same time and we have the internet connection. But both connections will also free from time to time on us. The cable HSI was just installed and we are new to this. Any assistance would be great! I'm taking my laptop home this weekend to see if I can get on wireless with it. Also (sorry) all the lights are working as they should according to the router software, but when I put the cd in ran the wizard, it tells me it can't find the router connected to my pc. I'm going batty with this. Thanks.
    MC

    Hi ... Mac address cloning is enabled on my router - so I guess that could be a problem, and the filmware version is 1.02.5 - we just installed this thing and haven't done any type of upgrades.
    A little history - adelphia didn't connect properly - turning off the pc killed the wireless router connection and then if I hooked right into the cable modem from the pc, I didn't get a connection. So, we unplugged everything and started out fresh following the install wizard and the pc now sees the router. After that, my laptop didn't lose it's connection when the pc was shut down either. So ... the xbox was next. It seems that when we have the WEP enabled, the xbox 360 can not connect to xbox live. We did a media test first it passes the connection to the wireless network and takes the WEP key, but it fails when looking for the IP address. All DHCD information is enabled. So, we disabled the WEP and ran the console test - and it passed. We then did the media test and it obtained the IP address this time, but then failed the media connect (whatever the next test is). Not sure we actually need the media text or just the xbox live test.
    I'd like to be able to use the WEP security, but we can't go live when it is enabled.
    We are new to this, so appreciate any assistance!

  • Always low signal strength of my wireless connection

    Hi,
    I have new lenovo notebook ( 3000 n100)
    my problen is that always my wireless network signal strength is lower then 60% even when my router is neer the computer !!
    what can I do?

    I would try changing the signal channel on the router. I don't know why, but sometimes wlan cards seem, idividually, not to perform so well on 1 or 2 particular channels.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Why do I always have to re-render and re-connect project?!?

    Hoping someone can help me with what I imagine is a pretty basic issue...
    Whenever I open my ProRes 422 HQ project, I always see two problems:
    (1) I get a warning that 160 audio files need to be reconnected
    (2) About 20% of my timeline requires rendering for video and audio
    Neither of the above is a problem in and of itself. I simply reconnect the audio files and render out the unrendered timeline sections.
    I then SAVE my project and work normally. And of course I SAVE again just before I quit for the day (in addition to frequent auto-saves).
    But the next day, when I boot up my Mac and re-open the project, I still see the above two issues! I then have to reconnect media AGAIN and render the same sections AGAIN! Never fails.
    How come these changes never get saved? What can I do to ensure that these items get saved? The reconnecting media is not a big deal but the re-rendering takes an hour.
    Any input appreciated.

    Could be a system/os problem or might be a corrupt sequence or project in fcp.
    Simplest thing to do, create a new sequence with the same settings and copy everything from the old sequence to the new. 
    Still have the same problem?  Try copying your sequence to a new project.
    As a test, you might try changing your render scratch disk to your startup drive as a test and see if the problem persists.
    Make sure your esata card's drivers are up to date.
    Are you absolutely positive all clip settings match the sequence settings?  Could be a slight difference in audio sampling or someting of the like causing the need to render certain clips.  Is it the same clips that always require rendering.  Put the playhead on a clip in the sequence that requires rendering and match frame (f) and edit into a new sequence.  When fcp asks if you want to match sequence settings to clip, say yes.  Does it require rendering?  If not, there must be some difference between the clip settings and the original sequence settings.

Maybe you are looking for