Always installing at start

I have a Nokia N73.
Recently I updated my software after saving my settings through the safety vault in PC SUITE.
After updating was complete I reinstalled the saved settings.
Now I have a try from the cell phone to install programs from the memory card and it always fails.
I get a message of failure and an advice to go the program installer and manually install all my earlier programs.
All earlier programs are installed.
I erased the memory card so that no initialising should start from there. It still tries to install something.
What to do?

This problem happened with my phone too. What worked for me: Sync phone contents with PC, format memory card, re-install firmware (I suppose *#7370# would work fine too to zap out all the phone settings), then sync back from PC.
Notice I sync (i.e. contacts, calendar...), not doing backup/restore. So some things are lost... e.g. got to reinstall applications, redo some settings, etc.
But the annoying problem is gone
SIS extension refers to SymbianOS Installer Files.

Similar Messages

Always install applications into non-global zones?

I am planning on taking full advantage of Containers and Zones as I migrate servers and applications to Solaris 10. During this migration process, I believe that I will have a need to initially just run just one application on a server. I fear that if I do this in the global zone I will lose flexibility down the road for future projects and workloads. So, should I consider always installing applications in a non-global zone and never install applications in the global zone? This would keep the global zone as the controller of the non-global zones and ensure that I can always add more non-global zones later without having to worry about what is running in the global zone.
Are there any thoughts or comments on this topic?

Yes we've found it's best to run the applications in non-global zones. Here are a few benefits, basically we only put an application in the global zone if it requires it (like Oracle RAC). Note non-RAC instances of Oracle will run in a non-global zone just fine.
Reasons to put applications in non-global zones
o Increased security (self contained environment)
o Increased flexibility for provisioning resources (CPU, memory, etc) when/if we decide to run multiple applications on the same hardware
o Increased flexibility in starting up temporary environments to debug issues in parallel to the primary environment (i.e. in another non-global zone on the same server)
o Works well with Sun Cluster (i.e. we cluster the non-global zones so that they can run across several hosts)
o Improved trouble shooting and performance diagnosis as the applications are isolated to a non-global zone
o Simplified environment for the application admins as the environment can be fine tuned for their needs (i.e. only let them see what they need)
o Disaster recovery is much faster for a non-global zone

Unable to install or start phone software update components -Arc S

I cannot update my xperia arc S. It always ended up showing this "
Unable to install or start phone software update components". Can anyone, help me?
Solved!
Go to Solution.

SUS ( Sony Update Service) ... download and install it on pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
or
http://www.sonymobile.com/global-en/tools/update-service/
Both the links are same
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Ask for refund for upgrading to lion, since lion always freezes at start up.

I want to know if I can get a refund for upgrading to lion. I have been really frustrated with this upgrade. Ever since the upgrade, I have not been able to start up normally. It always freezes at start up. I don't want to waste my time on fixing this issue any more.

No refunds that I know of.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.
After seeing what you have to do to return to Snow Leopard you might rethink your position of not wanting to fix the problem you have with Lion which probably arose from existing problems with your Snow Leopard system. The fix is pretty easy. Back up your data, erase the drive, reinstall Lion, restore your files.
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

When I download a program it always instals in German.

When I download a program it always instals in German.
I can not do anything about it, the language used in the new program is always German.
It is like there is some setting which tells the the installation file that the application needs to be German.
Except when it is downloaded from the App Store.
I am Dutch and mostly I use English as a languge. I can read and speak German but I just do not want it as a languge in a program on my MacBook Pro
I do not want German as a language. So how can I take care of this problem.
Any ideas?

The preferred language on my computer is Dutch. And yes that is what is on top.
There is no other in the list.
Some applications I prefer in English like Photoshop.
It is with third party applications, not App Store or Adobe, but with something like MS Office.

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

See:
* http://kb.mozillazine.org/Browser_will_not_start_up

Error while Installing and Starting SAP Widget Development Tools

Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AM

Hi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai

Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

Sender File Adapter always "Polling interval started" without complete

Hi,
I have problem with sender file adapter suddenlty the status from Communication Channel Log monitoring always with polling started without completed.
4/25/11 11:40:33 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:23 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:13 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:03 AM   Polling interval started. Length: 10.0 seconds
Normal :
4/25/11 11:41:50 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:41:50 AM   Processing finished successfully
4/25/11 11:41:50 AM   Processing started
4/25/11 11:41:40 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:41:40 AM   Processing finished successfully
4/25/11 11:41:40 AM   Processing started
I have tried to stop and start the channel but still no luck. This problem only happen for this particular communication channel others channel is working fine.
Please advise other solution before i need to restart the java engine since this in the production environment. The problem is some of the process was delayed because this issue. CC was delayed to pickup the file.
Thank You in advance.
FL

Hi Abhistek,
Thank you for your correction. It was typo.
Which assumption is correct ?
1. All 3 instance running together in the same time ? or
2. Either 1 of the instance running once time manage by clustering setting.
Example :
15:01:00   ---> A
15:02:00 -
> A
15:03:00 -
> B
15:04:00   -
> B
Currently :
15:01:00   -
> A
15:01:00   -
> B (lock)
15:02:00 -
> A
15:02:00 -
> B (lock)
It seems all 3 instance lose control from clustering ?
Regards
FL

Is Adobe Media Encoder CS4 always installed on drive c:?

Since my OS drive C: is fairly full, I installed CS4 Production Suite on drive D:. It's all there, except for Adobe Media Encoder, which is in C:\Program files (x86)\Adobe. Is this behavior unique to Vista x64 or just my PC? It hasn't caused any problems, but I was just wondering.

Thanks, but I like to keep drive C just for my OS and few other items that need to be there. I have a couple of TBs of SATA drives also installed. I just wanted to confirm that AME is always installed on Drive C;, no matter what you do.

IMac G5 (iSight) with 10.4.11: Screen always dimmed. Starts at full bright and a second later dimms and stays like that forever. Brightness controls work normally under this circunstance. Please help !!!

iMac G5 (iSight) with 10.4.11: Screen always dimmed. Starts at full bright and a second later dimms and stays like that forever. Brightness controls work normally under this circunstance. Please help !!!
Please don't tell me to adjust anything on the preferences, since I have tried all. I think it may be anoter kind of problem, maybe hardware related or anything.
I ran the Hardware repair DVD and everything was ok, but when the imac restarted the screen was very lit again, but when it went sleep, when it went awake again the screen got dimmed again. Because of that I think that the problem could be software related, but who knows. Excuse my english.

I can't see another possible answer - the longer your machine is up, the more the power supply is stressed, it protects itself by dimming the screen to lower the draw on it.

How to install and start the adapter(FILE)

hi,
when i checked in RWB for the adapters which are INSTALLED and STARTED adapters it's displaying all adapters except FILE adapter .
I need to known whether this adpater is installed or installed and started ,if the case then how to install and start the adapter

Hi Nandan,
if above is the case as i mentioned in previous response then,
You need to download the latest SAP BASIS 6.40 or 7.0 ".tpz file" (as per you service pack) from service.sap.com. Then you need to put this in the import directory:
<b>\usr\sap\<your system-id>\SYS\global\xi\repository_server\import\importedFiles</b>
Now go to
<b>IR>Tools>Import design Objects, you will find the .tpz file which you down loaded. Import this and refresh your cache.</b>
P.S This is the exact path in market placehttps://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
Regards,
Sarvesh

When I watch youtube videos, it always stop and start. Very annoying. Any good apps that we can use.

YouTube videos always stop and start . Is there an apps that we can download to stabilize the video.

Are you trying to watch YouTube from a web browser on iPad or from the YouTube app?
Should be running fine from the YouTube app on the iPad unless you have a slow connection.
Our family uses DSL (4-5 Mbps) and we stream video both with iPads, computers and TV with,mostly, no issues like buffering or data degradation/pixellation. It all depends on how much traffic there is on the Internet at any one specific time.
Heavy Internet traffic on different days at different hours of the day, from your ISP, can also be a factor in slowing down your Internet connection.

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

Always installing at start

Similar Messages

Maybe you are looking for