Always losing intenet, and local only

I have 2 questions, I recently bought 350N Wireless linksys router, I use Azerous alot and it seems that if want to be able to use the internet for more than lets say 12-24 hours Im ALWAYS having to powercycle the router, this is just ridiculous. My second question is, I recently got comcast VOIP service and ever since then, half the time when I am forced to powercycle my router IM only getting a local only connection. My parent's also went with comcast voip and they experiance the same problem. I have tried swapping out routers for them and me, and even did an rma on the router thinking that was the problem, but nothing has helped. I contacted comcast and linksys, and they just want to blame one another. I have done the whole clone mac address thing and that doesn't help. Anyone have a solution?

Check the firmware upgrade from the linksys website ... also check the adapter is compatible to wireless N router or not??? ...

Similar Messages

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put bacPlease Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

When to use Global transaction and Local Transaction only

Hi All,
Could you please help with this question thats been troubling me from quite long time.
When to create Global & local Transactions and Local Transaction Only while creating Data source on oracle Application Server 10 G.
Do I get any advantages by using Global & local Transactions for creating Data Source
Thanks In Advance.
Regards,
Ajay Kumar .Akula

mattyG wrote:
What is the difference between a single-process shared variable and a local variable?
A single process shared variable is more like a global variable, because it can be accessed from any VI in your hierarchy. Local variables are strictly local to the single VI where they reside.
Shared variables are a relatively new feature, while local and global variables are ancient. As such, shared variables are in many ways more modern and integrate better into state-of-the-art coding guidelines.
Shared variables contain error terminals so you can enforce execution order. local variables have no such thing.
A shared variable can stand on its own, while a local variable is always tied to a front panel object.
You need a project for shared varaibles.
You can easily turn a single process shared variable into a network shared variable later in the development, without the need to rewrite any code.
LabVIEW Champion . Do more with less code and in less time .

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
CB

I am planning to buy ipad 2 wifi 3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

I am planning to buy ipad 2 wifi 3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

I'm fairly sure the Verizon CDMA iPad 2 had no GSM sim slot. So it won't work with any other carrier except Verizon.
As far as the AT&T version goes, it should technically work but will not support 4G/LTE cellular bands.
Given iPad 2's are no longer being sold, I doubt any that could be bought would have a warranty still. Or have at most very little of it left.
Why an iPad 2? its now 3 generations behind the current one.
Perhaps an iPad 4 would be a better choice.

I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off.

I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off. In addition, I a interested in refurbishing my old G3. And, a lesser old G4 LCD that shows a yellow vertical hair-width stripe.
Thank you in advance.

What model PowerBook? The internal PRAM battery has discharged and is not recharging. You'll need to replace the battery. This site has instructions. http://www.ifixit.com/Browse/PowerBook
The PRAM battery is not easy to change on some PB G3 models. I changed the battery on a Wallstreet model. Had to totally disassemble to do it. Bought the replacement battery on eBay.
 Cheers, Tom

Why is there no control to turn off location services? I updated my iPhone 4 to iOS6.0.1. I now have no control over location services. Will it always be on and only activate if an application requires it?

I updated my iPhone 4 to iOS6.0.1. I now have no control over location services. Will it always be on and only activate if an application requires it? I want to be sure it will not drain the battery unnecessarily.

I found this answer in ios 4, but it worked on the ios 6 on my iphone 4:
moodogg
Currently Being Moderated Re: iPhone 4 / iOS 4 - Location Services Always On
Nov 20, 2010 10:25 PM (in response to modular747)
so i actually ended up walking into genius bar today. they couldn't figure out which program was causing the glitch either, but the way they solved it was by resetting all the location service permissions altogether. for those of you who want to know how to do this, navigate to "settings > general > reset > reset location warnings". also fyi, the apple service rep told me the purple location service icon next to each app simply signifies that particular app has requested your location within the past 24 hours, not necessarily that the app is active. hope this helps those with the same problem as i had. iPhone 4, iOS 4
I will mention that I did not have the problem until I downloaded the new googlemaps, which I have deleted off my iphone.

Transparent Tunneling and Local Lan Access via VPN Client

Remote users using Cisco VPN 4.2 connect successfully to a Cisco Pix 515 (ver. 6.3). The client is configured to allow Transparent Tunneling and Local Lan access, but once connected to the Pix, these two options are disabled. What configuration changes are required on the Pix to enable these options? Any assistance will be greatly appreciated.
Mike Bowyer

Hi Mike,
"Transparent Tunneling" and "Local Lan Access" are two different things. "Transparent Tunneling" is dealing with establishing an IPSec Tunnel even if a NAT device is between your client and the VPN-Headend-Device. "Local LAN Access" is dealing with access to devices in the LAN your VPN-Client-Device is connected to.
What do you mean exactly with "disabled once the connection is made" ?
You can check the local LAN Access by having a look at the Route-Table of the VPN-Client:
Right Click the yellow VPN-lock Icon in System-Tray while the VPN-Connection is active and select "Statistics ...". Have a look at the second register page "route details".
Are any local LAN routes displayed when your are connected ?
And - always remember two important restrictions the Online Help of the VPN-Client is mentioning:
1: This feature works only on one NIC card, the same NIC card as the tunnel.
2: While connected, you cannot print or browse the local LAN by name; when disconnected, you can print and browse by name.
Carsten
PS: Removing Split Tunnel won't enable local LAN access as all traffic would be sent into the IPSec tunnel.

Performance tuning: lite sessions and local ServletContext

I have been doing some research on iPlanet performance tuning. In our
current production environment (iAS6.0 SP1B, iWS4.1 SP2 on Solaris), since
we don't use clustering there should be a couple of performance improvements
we can make immediately:
1. Use lite sessions (<session-impl>lite</session-impl> in ias-web.xml) - I
believe that if you use lite sessions, the session data is stored in the kjs
process space as opposed to the kxs process space. This, of course, means
that if a kjs dies the user's on it will lose their session information but
it will provide a performance improvement by reducing kxs/kjs communication.
2. Use local ServletContexts (<distributable>false</distributable> in
web.xml) - This should cause the ServletContext to only be stored in the
originating JVM. So again, if a kjs dies, the user will lose their
ServletContext but again we will get a performance improvement by reducing
kxs/kjs communcation.
What I want to understand is how our load balancing configuration will
effect our production environment if we use this configuration. Right now
we use sticky load balancing on all our servlets but we don't have our JSPs
registered and therefore sticky load balancing cannot always be trusted to
return users to the iAS they came from. We make up for this by using
hardware load balancing that keeps the majority of our users sticky.
However, using lite sessions and local ServletContexts will require that a
user not only stick to an iAS, but to a specific kjs as well. Using sticky
load balancing would ensure that, but since we also rely on our hardware
load balancers, could they create a problem? If a user gets sent back to
the iAS they came from by our hardware load balancers, will the kxs process
be smart enough to return them to the kjs they came from? If so, then I
think that means that we can safely switch to lite sessions and local
ServletContexts, but if not, I think many users will lose their sessions.
Thanks,
Linc

Please follow thru this link for your answers
http://developer.iplanet.com/viewsource/char_tuningias/index.jsp
Thanks
Shital Patel
Lincoln wrote:
I have been doing some research on iPlanet performance tuning. In our
current production environment (iAS6.0 SP1B, iWS4.1 SP2 on Solaris), since
we don't use clustering there should be a couple of performance improvements
we can make immediately:
1. Use lite sessions (<session-impl>lite</session-impl> in ias-web.xml) - I
believe that if you use lite sessions, the session data is stored in the kjs
process space as opposed to the kxs process space. This, of course, means
that if a kjs dies the user's on it will lose their session information but
it will provide a performance improvement by reducing kxs/kjs communication.
2. Use local ServletContexts (<distributable>false</distributable> in
web.xml) - This should cause the ServletContext to only be stored in the
originating JVM. So again, if a kjs dies, the user will lose their
ServletContext but again we will get a performance improvement by reducing
kxs/kjs communcation.
What I want to understand is how our load balancing configuration will
effect our production environment if we use this configuration. Right now
we use sticky load balancing on all our servlets but we don't have our JSPs
registered and therefore sticky load balancing cannot always be trusted to
return users to the iAS they came from. We make up for this by using
hardware load balancing that keeps the majority of our users sticky.
However, using lite sessions and local ServletContexts will require that a
user not only stick to an iAS, but to a specific kjs as well. Using sticky
load balancing would ensure that, but since we also rely on our hardware
load balancers, could they create a problem? If a user gets sent back to
the iAS they came from by our hardware load balancers, will the kxs process
be smart enough to return them to the kjs they came from? If so, then I
think that means that we can safely switch to lite sessions and local
ServletContexts, but if not, I think many users will lose their sessions.
Thanks,
Linc

(local) only on Current Server when installed SAP Business One to a Standard User account

Hi. We have a client. Setup of Windows account was like this.
1. Built-in Administrator account is disabled.
2. Primary mandatory user account was made with Administrator rights (e.g. User).
3. Updated Windows 7 Pro 32-bit SP1 and installed all applications except for SAP Business One
4. Created new windows user account with Administrator rights (e.g. Admin)
5. Changed the primary account (e.g. User) from Administrator to a Standard User type
6. During SAP Business One client app installation, image below always notify even UAC was turned-off and installation proceeds without any error.
7. After installation, image below was the result.
8. Made some testing by enabling the built-in Administrator account and re-installed SAP Business One client app and result was the client app works ok with this account.
9. Created new user account with Standard User type and run the SAP client app and result was also ok with this account.
10. Run SAP Business One client app on primary made account (e.g. User-Standard User type) and the the made Administrator account (e.g. Admin) but same (local) only result occurred.
Any ideas Thanks in advance!

Hi,
Please check SAP note:
1583117 - Choose company list is empty in MS Windows Vista,7,2008.
Thanks & Regards,
Nagarajan

JRE 8 and Locale.setDefault(), java 8 update 5, Windows 7

Hello,
I have simple question that i can't resolve.
I am working on JavaFX application in which I am using DatePicker. This part is not important.
My date picker is formating date based on my Windows 7 OS Regional and Language settings(Formats).
This part is now relevant:
In order to try to make my app Regional independant, and show date format always as US, I only once used this line of code:
Locale.setDefault(Locale.ENGLISH);
Here is problem:
Now when I remove this line of code "Locale.setDefault(Locale.ENGLISH)" my application is no longer able to get Regional format from my Windows 7 OS Regional and Language settings(Formats). Locale informations are permanently lost in JVM. Things are even worse, because my JDBC connection is not working now, and it reports:
java.sql.SQLException: Locale not recognized
at oracle.jdbc.driver.T4CTTIoauthenticate.setSessionFields(T4CTTIoauthenticate.java:1006)...
How can I revert to old JVM behaviour, and get Locale information from my Windows 7 OS Regional and Language settings(Formats) automatically? Any help?
The application now is only working when there is Locale.setDefault(Locale.ENGLISH); line in code.

I am constantly using JRE8. Now
Locale.getDefault(Locale.Category.DISPLAY) returns en_US which is OK
and
Locale.getDefault(Locale.Category.FORMAT)? returns bs_BA_#Latin witch is something I set wrongly with my Locale.setDefault.
I think that this bs_BA_#Latin. How can I repair this and make JRE8 read Locale settings from regional settings?
Many thx

Laptop shows "access: local only" when connected to this hotspot

I have the Verizon Jetpack 4G LTE Mobile Hotspot MHS291L set up in my home environment. I have a number of computers that are able to connect to it and use the internet. There is one laptop that I have (Lenovo SL500) which is Vista SP2, that has trouble connecting to the Jetpack. I went into the Connected Devices settings for the Jetpack and noticed that this particular laptop was in the Blocked Devices section. I Unblocked the laptop and it then appeared in the Connected Devices section. Not sure how it got into the Blocked Devices section in the first place. Anyways, upon trying to connect to the wireless network, I looked at the wireless network connection and it shows "Access: Local only" instead of "Acess: Local and Internet." It seems like the laptop connects to wireless, but I cannot browse the internet in any browser. Also, I have tried this laptop at someone else's house that has a standard wireless router (no hotspot) and the laptop connects fine and is able to browse the internet.

The network status indicator on Windows products cannot always be trusted. Windows uses its own algorithm to determine its connectivity by checking a few resources on the web. In a nutshell if Windows can make it to the resources then it declares itself internet connected or otherwise. What you should do is your own troubleshooting to determine what is truly going on.
First step is to check your IP Address. Windows will display a 169.254.xxx.xxx IP if it is not completely connected to the current router/jetpack. If that is the case then your laptop has not been accepted onto the router and you should check your connection credentials or recreate your connection profile.
The next step if you have a normal and good IP address is to manually check the internet by browsing to a website. Even though your computer cannot communicate the way it wants to that doesn't always mean that all internet communication is having a problem. You should always try a simple browse to Google or another popular search engine or website when experiencing problems to confirm the scope of the situation.
Pending on how these first two simple checks go you should proceed one way or another. Chances are there is a wireless profile conflict on your Vista machine for your Jetpack. The best course of action would be to wipe the wireless profile and start over from scratch. I'd start here and work my way outwards.

Remote and local interface on same ejb 3.0 bean instance

Hi,
Is it posible to get remote and local interface on same ejb 3.0 bean instance.
For example get local interface of a bean and than pass it as remote to client.
Both interfaces must operate on same bean instance.
Thanks
Zlaja

yes. You can implement multiple interfaces on a single class, so you can add a local and a remote interface. One trick to avoid duplicate code is to simply make the remote interface extend the local interface; then you only have to add the @Remote annotation and you're done.
For example get local interface of a bean and than pass it as remote to client.You don't pass an instances to a client, a client looks up a remote instance of the bean through JNDI.

How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

This is complex. Until today we had one iMac with two user accounts - one for me and the other for my wife. We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us. Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd. (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
We've finally bought my wife an iPhone and set up an iCloud account for her. And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff. But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine. But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
Originally I tried a workaround by simply having her iPhone log into my iCloud account. That works great for the calendars and the contacts. But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account. And neither of us want to sync our other things to each other's iMac accounts or iPhones. Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's. So we definitely don't want this as the set-up and communications network between our devices.
We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone). Does this description make sense to you? I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work. If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
If anyone can help me set this up I'd be most appreciative! Thanks so much. Merry Christmas and Happy New Year to all readers in this community!

BobT.
I had the same problem, and decided to look into it last night.
First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing.
Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
From this point on, the 3 devices should sync contacts with each other.
This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

Always losing intenet, and local only

Similar Messages

Maybe you are looking for