Always on availability listener with multiple IP addresses for SharePoint 2013

Hello
I think theres something I'm missing about AG listeners. My test config is 1 SharePoint WFE & 2 SQL servers configured in an AAG.
WFE, SQL1 & SQL2 servers are all on the same subnet.
On the WFE, I configured an alias called SP15 to be used for the SQL servers. If I failover from SQL1 to SQL2 I just need to change where the alias is pointing on the WFE. So why do I need a listener? This works fine, albeit manually.
I have read on some posts that an automatic failover process is possible. This sounds ideal. How can I add a 2nd IP address to the listener when both SQL servers are on the same subnet? The GUI doesn't seem to allow this.
TIA
Dermot C

In addition to what David has already mentioned, the Availability Group Listener Name can be used to replace the SQL Alias that you've created on your WFE. This makes it easier for high availability and disaster recovery but is also a great approach for
migrating to a better hardware because the connection to the database is abstracted by the listener name.
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Similar Messages

Multiple file upload in SharePoint 2013 using AjaxFileUpload

Hi all,
I want to add multiple files using file upload control in our visual web part SharePoint 2013. I tried to use AjaxFileUpload (from Ajaxcontrol toolkit) in my visual web part and also added the handler in web.config as described in article (http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/ajaxFileUpload/ajaxFileUpload.aspx).
But, it’s not even opening the browse dialog box.
I also tried to see if any third party control is available to achieve multiple file upload in SharePoint 2013 Visual web part, but without any success.
Please help.
Regards,
Monica

Hi
Try to add the dll files of Ajax Control Toolkit in the
Bin folder of your SharePoint Web Application (IIS Site)
Hope that help
Ahmed Naji SharePoint Geek
MCP|MCTS|MCPD
My English SharePoint Blog | DotnetFinder My Arabic SharePoint Blog|
CodeReloaded
My Gallery Contributions
SharePoint 2010 Twitter Web Part
SharePoint 2010 Custom Timer Job

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Billing Documents with multiple mailing address

Experts,
What are all the standard options to generate SD billing documents with multiple mailing addresses. Billing document contents will be same but they will addressed to different mailing addresses.
Have you come across this situation and implemented? Please let me know you expert advide.
Thanks much,
Nagarajan

I assume that
multiple mailing addresses
are fixed.
So, to print a hardcopies of invoice with multiple mailing addresses.
You can have Z table in the system with all the mailing addresses, say,
Bill-to Party
Sr No
Address
100023
01
Chennai Address
100023
02
Mumbai Address
100023
03
Noida Address
Then write a logic in your print program to call the Z Table with address while printing the output.
You can take assistance of ABAPer in your team for this.
Regards
JP

GSLB reply with multiple IP address from DNS

hi,
I believe GSLB is suppose to check availability( & other parameters) of servers and then replies to client with the available( or the best) server address for Act/Sby application failover.
But in my test config GSLB replies with both the ip address of A/S servers.
Plz correct me if im wrong,& help me to solve this problem.
Thanx

This URL might help you:
http://www.cisco.com/en/US/products/hw/contnetw/ps4162/products_configuration_guide_chapter09186a00800ca812.html

Broadcasting via Bursting to multiple email address for a single vendor cod

Hello -
I have a requirement to broadcast out a web template based scorecard to multiple email addresses for a given vendor code. We have gotten it to work via a single email address, but I need to send it to more than one email per vendor code.
Has anyone else tried this?
Thank you!

Hi Chris,
If my understanding is right, you must be using the master data of vendor Code(Which has an attribute to store Email IDs).
You can add multiple email ID to the same master data separated by semi colon ";"
If you are using user IDs instead, I dont think it is possible to use multiple user ID in the same attribute.
in this case you need to enhance the master data with a new attribute to store the second user ID and the create a separate setting for this attribute.
Hope this helps.
Regards.
Shafi.

After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But wont work anywhere now

After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Multiple shipping addresses for the same supplier (depending on the symbol)

Hello ,can we set up multiple shipping addresses for the same supplier (depending on the symbol)?
.& How..
Thanks

a delivery adedress has nothing to do with a certain supplier, except you are talking about subcontracting (do you?)
a delivery address specifies an address where you want the supplier to send the goods to.
if it is a third party PO, then the delivery address is derived from ship-to partner of the sales order.
in case of a standard order to stock, the delivery address is coming from the storage location address (if maintained). if no storage location address is maintained, then SAP takes the address from your plant.
You can manually add a delivery address in MEAN transaction and then manually assign in POs delivery address tab.
here you can as well take the address from any address already in your system (e.g. any customer or vendor).

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

How do I enter multiple email addresses for a Firefox Sync account?

How do I enter my multiple email addresses for one Firefox Sync account?

Sorry, but Address Book does not allow you to select more than one email address to send to in a group. There's really no reason why people need multiple copies of a message, anyway; they have the option of forwarding email to another email address of theirs.
Mulder

Can anyone help me with changing email address for resetting password notification

Can anyone help me with changing email address for resetting password notification?

If you know the answers to your security questions, you can change your rescue email address as shown in step 6 in this article: http://support.apple.com/kb/HT5312.
If you don't kow the answers to your security questions or need other assistance doing this, either contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or contact the Apple account security team: http://support.apple.com/kb/HT5699.

Hi! Can someone help me with repair service address for Palm TX?

Hi! Can someone help me with repair service address for Palm TX?
This question was solved.
View Solution.

Good luck, and please let us know here how it works out for you. We love knowing of current resources who can help solve people's problems with these older devices.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

SQL 2012 AlwaysON High Availability for SharePoint 2013

Our Company have 2 Webfront Servers for Sharepoint 2013 and one Database SQL 2012 Server.
We got one more Server & we don't have Storage so need to configure Always On.
There are Some Confusions:
1- Database Server is in production, so how much down time required to Achieve the AlwaysOn?
2- What are the Changes need to be done on Production Server?
3- What are the Steps to be followed While Configuring new Database Server?
Regards,

Hi Genius1985,
According to your description, you want to configure a SQL Server 2012 AlwaysOn Availability Group for your database, right?
Question 1: Database Server is in production, so how much down time required to achieve the AlwaysOn?
There is no a certain downtime for AlwaysOn, it depends on the configuration of our AlwaysOn Availability Group, normally it can be several seconds or minutes. In order to understand why there is downtime for SQL Server with Microsoft Clustering, please refer
to the following article:
http://www.mssqltips.com/sqlservertip/1882/understanding-why-there-is-still-downtime-for-sql-server-with-microsoft-clustering/
Question 2 and 3: What are the Changes need to be done on Production Server? What are the Steps to be followed While Configuring new Database Server?
Since AlwaysOn Availability Groups require a Windows Server Failover Cluster, we first need to add the Windows Failover Cluster Feature to all the machines running the SQL Server instances that we will configure as replicas.
Once the Windows Server Failover Cluster has been created, we need to proceed with enabling the AlwaysOn Availability Groups feature in SQL Server 2012. This needs to be done on all of the SQL Server instances that we will configure as replicas in our
Availability Group.
For more details about Step-By-Step: Creating a SQL Server 2012 AlwaysOn Availability Group, please refer to the following article:
http://blogs.technet.com/b/canitpro/archive/2013/08/20/step-by-step-creating-a-sql-server-2012-alwayson-availability-group.aspx
If you have any question, please feel free to let me know.
Regards,
Jerry Li

Where is coding guideline for SharePoint 2013 available?

Can any one suggest where is coding guidelines and best practices for SP 2013 development is available?

Hi,
According to your post, my understanding is that you want to know the best practices for SharePoint 2013 development.
There are some articles cover best practices targeted towards software developers in SharePoint 2013, you can refer to them.
http://social.technet.microsoft.com/wiki/contents/articles/13373.sharepoint-2013-what-to-do-farm-solution-vs-sandbox-vs-app.aspx ,
     discusses when to use farm solutions, sandbox solutions, or sharepoint      apps.
http://social.technet.microsoft.com/wiki/contents/articles/13637.sharepoint-2013-best-practices-what-client-api-should-you-choose-when-building-apps.aspx ,
     guidelines to help you pick the correct client API to use with your app.
http://msdn.microsoft.com/en-us/library/jj164060(v=office.15).aspx
http://social.technet.microsoft.com/wiki/contents/articles/16343.sharepoint-2013-best-practices-setting-up-a-dev-environment-for-windows-apps-and-sharepoint.aspx ,
     describes how to set up a dev environment needed for creating Windows Apps      that leverage SharePoint.
http://social.technet.microsoft.com/wiki/contents/articles/16353.sharepoint-2013-best-practices-working-with-connection-strings-in-auto-hosted-sharepoint-apps.aspx ,
     discusses how to deal with connection strings in auto-hosted apps.
For more reference:
http://social.technet.microsoft.com/wiki/contents/articles/12438.community-best-practices-for-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Which version of sql server 2012 or 2014 is best for sharepoint 2013.. Any excellent comparision available please let me know..

Which version of sql server 2012 or 2014 is best for sharepoint 2013.. Any excellent comparision available please let me know..i mean enterprise version BI version or standard version.. i just need a detailed comparison if available please thank you

As of right this very second, SQL Server 2014 is not supported. SharePoint 2013 supports:
One of the following:
The 64-bit edition of Microsoft SQL Server 2012.
The 64-bit edition of SQL Server 2008 R2 Service Pack 1
Hardware and software requirements for SharePoint 2013
Edit: I may be mistaken. It looks like the April 2014 CU adds support for SQL Server 2014. If this is the case generally going with the latest SQL Edition provides you with the latest SQL functionality. I'm not aware of any SharePoint features that would
make use of functionality that is new to SQL Server 2014 but this could change with a future service pack.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Always on availability listener with multiple IP addresses for SharePoint 2013

Similar Messages

Maybe you are looking for