Always rendering the same clips on launch

Hi all,
I've imported a few .mov files into FCP to use for exercise purposes while I learn the program. The problem is that every time I open the project, the clips appear as unrendered, even though I rendered them previously. Why does this happen?
Thanks,
Andrew

MPEG 4 (Perian)
You can't use MPEG 4 files in FCP without a load of trouble.
Convert them to a FCP friendly format such as DV. Then set up your FCP software to work with that format.
From the Final Cut Pro menu bar: Final Cut Pro > Easy Setup > DV PAL. (just noticed your location says Australia -G'day)
Then, Sequence > Settings > Load Sequence Preset.
How to convert all those MPEG 4 files to a usable format? Read this:
http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0
Message was edited by: Aborigines

Similar Messages

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

You should check that the Project settings match the clip settings before editing them to the Timeline.
Only newly created Projects will change not existing ones by adjusting the Project settings.
If, for example, you have a Project set to NTSC DV you can only end up in trouble if the clips are PAL 1920 x 1080i.
Al

Why there's a lenght difference between 24fps and 23,976 fps timelines with the same clip?

I was working on a 23,976fps project and I've tried to import a short animated sequence of 44 tiff frames in my timeline in my Premiere CS5.
I've imported the sequence, interpreted the footage to 23,976fps (as it was rendered in AE) to check it before sending it to a finish house.
First issue. Even if I set the framerate to 23,976, Premiere CS5 shows me 23,98 on interpret footage window. I've assumed it as a rounded number.
When I drag the clip to my 23,976 sequence, the clip shows as 43(!) frames length on info panel. It misses one frame. Putting the sequence over the original video, It really misses a frame.
I decided to make a test. And placed the same clip, interpreted the same way on a 24fps sequence, and the clip shows as 44 frames length on info panel.
How can, the same clip, shows different amount of frames (I'm not talking about time, but simply raw frames), on different timelines? It does not make any sense! If my sequence has 44 frames, It should show as 44 frames independent of the timeline I've imported it. Am I Right?
Just for test, I´ve imported the same sequence on AE, and in it shows as 44 frames on a 23,976 timeline. How can I trust Premiere frame interpreting this way?
Just one more thing. The scene used as base for the AE animation, has 44 frames, and it was measured and cut from a 30s film on the same premiere that is having this weird behavior.
Can anyone explain to me what Just have happened? It´s driving me Crazy!
Thanks in Advance
Mauricio Mendes

There's a long and storied history behind the concept of a drop frame tmecode. It traces its origin to early color TV in the USA, and was a way to get rid of artifacting that was visible on B&W TVs when watching the color signal (color subcarrier).
Basically, by having your intermediate timebase set wrong, you were having PPro drop a frame. That's why you saw the mismatch in frame numbers.

Problems importing the same clips from diferents cards IMAC and CS5

Hi, I'm having trouble importing my clips recorded in The ex1, I'm using CS5 with an imac, The problem is that when I import the same clips recorded in two cards, the second card comes exactly with what is inside the first card. It does not have what was originally in it, it just copies what was on the first card or vice versa. But the original folder in my drive is intact with the two cards intact. The problem is when I import it to CS5 on IMAC. When i import the video the imac makes a long file with all the clips an puts them together except the clips from the previous card, it shows but with the same video that is in the begining of the second card or the last clip recorded in the second card .I tried to import the clip again from the first card and it comes with the same video from the second card again.

1) Don't know why this is happening. It may have something to do with
I downloaded from iCloud the same library I was working with
I'm not clear what procedure you're using here. Using a cloud for storage might change some file tags. Generally users I think keep the library on the same drive as the media, keeping the library backups on the system. There is no real benefit in keeping the media in a separate location. Often users will keep the library in the same folder as the media. It makes backing up using tools like Carbon Copy Cloner very efficient.
1a) This can be difficult to find as there sometimes is no obvious indicator. It might be a missing element in a compound clip, a missing or altered layer in a graphics file, a missing font, a missing effect. These will show up inside the item involved, but may not be apparent in the browser. A missing transition for instance will not be seen until you skim over the project or try to export it.
2) The 43 MB is a small amount of optimized media. This never prevents relinking. The library is always looking for original media, or proxy media if you're in proxy playback. It never looks for optimized media. If it has it, it uses it, if it doesn't, it uses the original media. If you are using original/optimized playback, you must have the original files. The optimized files are not enough.

Adding 2 effects to the same clip!!!

Hi,
Can you add 2 different video effects to the same clip in iMovie 9? You used to be able to do it in the old iMovie - how can you do it in this version. For example if I want to have aged film and vignetting on the SAME clip?

In the older versions of iMovie, you render as you go, so you could pile render on top of render. However, in the new iMovie, all rendering is done at the end, so you can only do one video effect per clip (more if you count the video adjustments).
However, you can simulate the effect of multiple renders by
1) create a project just for this clip you want to manipulate. Drag the appropriate clips into the Project from the Event
2) Apply the first effect. SHARE the project using QuickTime in Current Dimensions in Apple Intermediate Codec.
3. Import the resulting file back into iMovie and place it into an Event.
4. Drag this clip into your main project and apply the second effect.
Message was edited by: AppleMan1958

How come when I send a picture with iPhoto email it always send the same picture event when I choose a different picture until I log out from iPhoto

how come when I send a picture with iPhoto email it always send the same picture event when I choose a different picture until I log out from iPhoto

Why? Because something is wrong.
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID?

Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID? If so, where do I need to change his email address info, so that his calender and contacts remain his? Thank you

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

I have premier
elements 12
How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

timc
I do not see a way to separate audio channels to edit them separately in Premiere Elements (any version).
Premiere Elements does have audio effects including Balance, Fill Right/Fill Left, and Swap channels, but that is not what you are seeking.
I would refer you to an audio editor such as the free Audacity for what you want to do.
Splitting and Joining Stereo Tracks - Audacity Manual
I am not sure if this is close to what you seek
https://forums.creativecow.net/thread/3/883383
But, the opportunity seems to be in Premiere Pro, not Premiere Elements
Please review and consider and then let me your thinking on the matter relating to your Premiere Elements 12 (what operating system).
Thanks.
ATR

I keep getting notified that there is an update to Firefox Weather 2.0.1 but when I try to install it I always get the same "download error" -228. How do I get around this?

I don't think additional details will help since I don't have any. I have tried repeatedly to install this update and always get the same result which I have already detailed. This is technically an Add-On but I was given no place to ask questions about it.

See if this helps you. <br />
https://support.mozilla.com/en-US/kb/unable+to+install+add-ons#Download_Error_228

How do I set a fixed page size in Muse so that the window always stays the same size

how do I set a fixed page size in Muse so that the window always stays the same size

Hi Aish & thanks for responding;
I would like the window size to stay the same for the entire site and not be
able to scale to drag & scale it. ie 950 pixels x 500 pixels.
Thanks,
JB
On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

How to apply warp stabilization to the same clip used twice in the same timeline

If I use the same source clip in a timeline (say 3 or 4 different sections of the clip by dropping the same clip on the timeline and just trimming it differently) and want to stabilize them all, how do I do that? The first instance of the clip lets me use warp stabilization, but then when I try to apply it to later instances of the same clip in the timeline, it says I can't do that. How do I apply the stabilization to later instances of the same clip in the timeline?
Thanks

After trimming the clip just apply the warp stabiliser to it without copying and pasting. You can't copy and paste the warp stabiliser because it needs to analyse the pixels of each clip everytime its applied.

Make a file extension to open always with the same app

Hello, do you know how can I make a file extension to open always with the same app. So far I have been doing it by double click > open with > other > and then mark open always with this app, BUT
I do not want to do this very time with all the same file extension I have in my hard disk, is there any way, like in windows, to select and preset a determined app to always open all files with the same extensión in my hard disk??
Actually what I´m experiencing and would like to change is to open always .pdf extensión with Acrobat and not with Preview
Thanks very much in advance for your help!!

OK!!!!
Got it!!!
Thanks anyway!!

Is there any way I can program "Capture" to save pnp.picts always under the same name, without a date ?

Is there any way I can program "Capture" to save pnp.picts on the desk, but always under the same name, without a date ?
It may be sound weird, but I use it in a very special way, and I would like, like photoshop, that capture just replace
the previous pict by the new one..without any warning.
Pierre

There is no way to go back from an XFA form to an Acroform even with Acrobat Pro, still less with Acrobat. You either need to remake the form, or change your plans to use a third party viewer - Adobe have an excellent range of programs they would like you to use!

Firefox always uses the same session id

Hi,
our company changes standard browser from IE6 to Firefox 3.5.10 .
Now we have great problems with with our ColdFusion application when running it inside Firefox ,because Firefox doesn't create new session id
when working in two tabs or two windows. It always uses the same cfid and cftoken.
So it is not possible to work with two different sessions.
IE6 always creates new session id when opening new window.
Has somebody solved this problem? It is very urgent!!!
regards
Claudia

I suspect that this is browser issue, not a server-side (CF) issue. In order to support different cookies in different tabs you will probably need to try to find a Firefox extension to change how the browser uses cookies.
This extension is advertised as doing what you need. Note that I have never used this product.
http://www.nektra.com/products/cookiepie-tab-firefox-extension

Always rendering the same clips on launch

Similar Messages

Maybe you are looking for