Always the first line

i have table with a lot or rows
i want always the first line
how?select single?

HI,
U can store the field in desired variable also...
Ex:
data : v_ebeln like ekko-ebeln.
select ebeln into v_ebeln from ekko up to 1 rows <Where condition also can be specified if required>.
endselect.
Sreedhar

Similar Messages

File Sender adapter not reading the first line

Hi,
I have a scenario configured from file to jdbc adapter.
However, I found a problem in my file sender adapter. My file adpater always not picking up the first line from my text even I have set the 'Document Offset' to 0.
Any Ideas? Thanks.
Regards,
Pua

Hi Latika Sethi,
My complete input text file is as below, it contains only 2 testing records:-
H1|DIZ1                          |A0016507    |10000020|09/2007
H2|ABC0001
D|P|0001|Gaji Pokok       |   1,000.09
D|D|0002|Denda              |   1,000.00
D|P|0003|Elaun               |   1,000.00
H1|PUA1                        |A0016508    |10000021|09/2007
H2|ABC0002
D|P|0001|Gaji Pokok       |   2,744.09
D|D|0002|Denda              |   2,000.00
D|P|0003|Elaun               |   2,000.00
After the message mapping, I found the pipeline existed in sxmb_moni as below:-
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_rmp03B_filejdbc_sender xmlns:ns="urn:rmp03:pdrm:ips:jdbcjdbc">
<PaySlip>
..<Header2>
.... <IC>ABC0001</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>1,000.09</Jumlah>
.. </Details>
</PaySlip>
<PaySlip>
.. <Header1>
.... <Nama>PUA1</Nama>
.... <KWSP>A0016508</KWSP>
.... <NoGaji>10000021</NoGaji>
.... <Bulan>09/2007</Bulan>
.. </Header1>
.. <Header2>
.... <IC>ABC0002</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>2,744.09</Jumlah>
.. </Details>
</Payslip>
There are 2 payslips as for the top payslip node...Header1 tag is missing. It means that during the file sender step....the first line of my record which is :-
"H1|DIZ1                          |A0016507    |10000020|09/2007"
is not read into the xi pipeline. Basically this is the problem i faced.
Has somebody facing the same problem before? Currently I have no choice but moved the First line of the text into Second line and left the first line of the text become null/ empty line. As such both records can be successfully read by the XI.
However what I wondered is sometimes clients will do insert the records into the first line and this might made some data loss.
Thanks...

How to set cursor at the first line in a table control?

Hi,
I have a customized infotype screen where a table control is being used to input new values.The tab control has 30 lines.Now, the problem is that when the screen is displayed, the cursor always starts at 8th or 4th line.The behaviour is not very consistent.I tried the following statement in the PBO, but no effect.
SET CURSOR FIELD P9417-ZCOUNTRY LINE 1. ( P9417-ZCOUNTRY is the name of the tab control field where i want to set the cursor ).This is the last statement in the PBO.
Can someone please tell me why still I am not able to set the cursor at the first line? I have infact noticed that , in the debugging mode , sometimes the cursor starts at the first line.Please help. Thanks

I have got a new requirement on this now. If the table control does not have any records , then the cursor position should be on the first row.Otherwise, if it already has some records, then the cursor should be at the first empty row.I wrote the code like below.
if sy-ucomm = 'INSERT'.
set cursor 'P9714-ZCOUNTRY' line 1.
else if sy-ucomm eq 'CHANGE'.
describe table itab lines fill.
fill = fill + 1.
set cursor 'P9714-ZCOUNTRY' line fill.
endif.
I am facing a strange problem now.The table control has some 10 rows when you see the screen for the first time.If the number of records already present is less than 10, I am able to position the cursor on the first empty row.But if the number is say 15, then the cursor position goes to eighth or fourth line or sometimes the first line.
Is there any way to display the last few records , ie, if there are 15 records , is there any way to display the last five rows when I see the screen for the first time, rather than showing the first 10 records?How can I position the cursor at the first empty row, when there are more records?
Thanks in advance..good answers will be rewarded.
Mahesh

Excel upload with header in the first line

Hi ,
I have to upload a Excel sheet with data where the first line will be the Header .
I am using the FM
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      I_LINE_HEADER        = 'X'
      I_TAB_RAW_DATA       = IT_TAB_RAW_DATA
      I_FILENAME           = P_FILE
    TABLES
      I_TAB_CONVERTED_DATA = IT_FS00_C
    EXCEPTIONS
      CONVERSION_FAILED    = 1
      OTHERS               = 2.
But the data is not getting uploaded in the IT_FS00_c table.
is there any other way to do it.
thanks and regards,
Vikki.

Use the folllowing coding.....
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
         EXPORTING
              filename                = p_file
              i_begin_col             = 1
              i_begin_row             = 2
              i_end_col               = 7
              i_end_row               = 9999
         TABLES
              intern                  = t_alsm_tab
         EXCEPTIONS
              inconsistent_parameters = 1
              upload_ole              = 2
              OTHERS                  = 3.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SORT t_alsm_tab BY row col.
    LOOP AT t_alsm_tab INTO r_alsm_tab.
      AT END OF row.
        l_append = 'X'.
      ENDAT.
      IF r_alsm_tab-col = 1.
        r_input_tab-kokrs = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 2.
        r_input_tab-bukrs = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 3.
        r_input_tab-rprctr = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 4.
        r_input_tab-pline = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 5.
        r_input_tab-sdatst = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 6.
        r_input_tab-sdated = r_alsm_tab-value.
      ELSEIF r_alsm_tab-col = 7.
        r_input_tab-kostl = r_alsm_tab-value.
      ENDIF.
      IF l_append = 'X'.
        APPEND r_input_tab TO t_input_tab.
        CLEAR : l_append , r_input_tab.
      ENDIF.
    ENDLOOP.
ENDIF.

The first line in a file is supressed

hi all,
i have a really weird problem.
i have a file with a lot of data and i am using a file adapter with file content conversion to parse it.
the file adapter is a sender one.
the problem come when i do read the file and then it ignore the first line of the file.
all the lines from the second one forward is shown in SXMB_MONI but the first line of the file isn't.
i can't seem to figure out what the problem is, i tryed looking for some kind of attribute in the file adpater but had no luck.
could you please help me?
btw,
the file structure is: header,1,body1,<wildcard>,body2,<wildcard>
Edited by: Roi Grossfeld on Oct 29, 2008 4:24 PM

Recordset Structure: H1,1,B1,<wildcard>,B2,<wildcard>
Key Field Name: RecordType
H1.fieldFixedLengths 6,2,8,1,1,3,30,5
H1.fieldNames FileNo,RecordType,TransmissionDate,Car_Truck,BU,MD,FileName,Count
H1.keyFieldValue H1
B1.fieldFixedLengths 6,2,10,27,8,8,4,5,3,11,9,9,11,11,9,9,7,9,11
B1.fieldNames FileNo,RecordType,InvoiceNumber,VesselName,MMSEShipmentDate,PlanArrivalDate,DeliveryPlace,Units,Currency,ModelPriceAmount,OptionPriceAmount,ColourPriceAmount,REPriceAmount,TotalPriceAmount,FreightChargeAmount,InsuranceFeeAmount,MiscellaneousAmount,VATAmount,GrandTotalAmount
B1.keyFieldValue B1
B2.fieldFixedLengths 6,2,10,12,12,12,5,6,12,3,3,3,4,17,7,7,12,8,5,3,9,7,7,9,9,7,9,4,20
B2.fieldNames FileNo,RecordType,InvoiceNumber,MDOrderNumber,MMSEOrderNumber,MMSECaseNumber,ModelYear,BodyType,Model,ExteriorColourCode,InteriorTrimColourCode,OptionCode,RearEquipment,VehicleIdentificationNumber,ChassisModel,CSequenceNumber,EngineModel,ESequenceNumber,KeyNumber,Currency,UnitModelPrice,UnitOptionPrice,UnitColourPrice,UnitRearEquipmentPrice,UnitTotalPrice,UnitVATAmount,UnitTotalVAT,VATRate,VATNumber
B2.keyFieldValue B2
ignoreRecordsetName true
Edited by: Roi Grossfeld on Oct 29, 2008 4:39 PM

Adding extension "line-size 255" to a standard report on the first line

Hi Experts,
i want to modify the statment from Report ztest1 message-id zm to Report ztest1 message-id zm and line-size 255.
I am going to add the extension line-size 255 to the report statement in a standard report. There are no enhancement points near the first line. I have access key available, so i can make the changes to core mod.
The problem is that if i run the report in background, out of the 8 fields, i only see the first 6 columns in the spool. remaining 2 fields are truncated.
The reason for truncation is bcoz the line-size extension is not given to the report. What procedure do i have to follow to add the extension line-size 255?

HI,
You do not need any enhancement for it.
If you have the access key then just add the additon line-size 255 to the repport statement.
Regards,
Ankur Parab

Total of numeric fields in the first line of ALV output

Hi All,
i have a problem it is like i have created ALV list display and total is dipalyed of numeric column for each page. my requirement is total should be diaplyed at the end of page plus toal should be diaplyed on the first line of second page also .
please suggest me some solution .
thanks
praveen

Hi
one thing you can do is capture the totals into variables and display then in each top-of-page except first page.
it will work as SORT and all dont have effect on top-of-page data. If you append that to internal table once we hit SORT data will chnage and it will give errorneous effects.

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

What are the Variables settings, what is the text file’s content, …?

Only showing the first line.

When I compile and run this program, it only prints out the first line of text. Any idea's why it might be doing this?
public class app {
     public static void main(String[] args)
          int years;
               years = 1000;
                    System.out.println("Millenium = " +years);
          int days;
               days = 365;
                    System.out.println("Year = " +days);
          int hours;
               hours = 24;
                    System.out.println("Hours = " +hours);
}

What are you expecting it to do? Do you want an applet instead?
public class Test extends JApplet
   String message;
   public void init()
      message = "Hello World!";
   public void paint(Graphics g)
      g.drawString(message, 5, 5);
}

D110 only prints the first line.

If I send an item to the printer, it only prints the title. I have tried to copy to notepad and pasted to an email. Then sent it to the printer thru an email. It only prints the first line. How do I get it to print the whole item?

You can use one of our diagnostic tool and can this can help you resolve the issue automatically and you can use it in future as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=sg&dlc=en&sw_lang=&product=5169...
Check if the issue gets resolved.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Read the first line of the table.

Hi,
Can you pls let me know as to how I read the first line of the table.
Thx.

hi check this.
data: begin of itab occurs 0,
        matnr like mara-matnr ,
        meins like mara-meins,
        end of itab.
select-options: s_matnr for mara-matnr .
select matnr
         meins
         from mara
         into table itab
         where matnr in s_matnr .
read table itab index 1 .
loop at itab .
write:/ itab-matnr .
endloop .
regards,
venkat.

Summary field printing on the first line when it supposed to prin last page

i have created manual report. in the end of the report i have summay columns. wheni run in oracle reports it perfectly shows the grand totle. when i generate to file (PDF) thegrand total print on the first line. can some one tell me wht is it printig on the first line when it supposed to print on the last page. i tried print object on Last Page. it is still same.

You may have hit this side effect of page protect (all copied from the Help):
Description The Page Protect property indicates whether to try to keep the entire object and its contents on the same logical page. Setting Page Protect to Yes means that if the contents of the object cannot fit on the current logical page, the object and all of its contents will be moved to the next logical page.
Note: Using Page Protect may cause objects below the page protected object(s) to appear above the page protected object(s).
Solution:
If Page Protect causes an object to be moved to the next logical page when formatting, an object alongside the page protected object may or may not be moved as well. If the object alongside the page protected object is not anchored (implicitly or explicitly) to the page protected object, and that object can fit in the space where the page protected object could not fit, the object will print on that logical page. Otherwise, the object will be moved along with the page protected object to the next logical page.
(To say it simply: anchor the summary field explicitly).

How to echo the first line???

Hi everybody,
I need to know how to echo the first line of an XML document with a SAX parser, for example :
<?xml version="1.0"?>I've already tried :
public void processingInstruction(String target, String data) throws SAXException {
        System.out.println("Target = (" + target + ")");
        System.out.println("Data = (" + data + ")");
    }but it doesn't work.
Please, help me...
Thanks.
Maxime.

http://java.sun.com/webservices/docs/1.0/tutorial/doc/JAXPSAX4.html

Display the first line

hi,
i have a field called comments of length 1000. i need to display only the first line of the comments field in the alv grid.

Hi Juli,
Once you get the data into the internal table (itab)....
Read itab with sy-index 1 into one internal table.
then pass this to the alv grid fm...

Hyperlink cut after the first line

Hello,
we use adobe acrobat pro with adobe pdf printer. when we print a word document with hyperlinks over several lines with the pdf printer and open it after printing then the hyperlink will show's in the pdf document but the hyperlink will cut after the first line...
can anybody tell my how i can fix this problem?
thank you
regards
christopher

The links you see in Acrobat or Reader after you print to the Adobe PDF printer are just the best guesses of these packages when it sees something like a link. To get the links embedded you either have to do it in Acrobat directly or use the Convert button as Bernd mentioned.

Always the first line

Similar Messages

Maybe you are looking for