Always uploads whole page, even with minor changes // please help....
even if I only change the permission code to the webpage or
even if i change one dot, the page uploads the whole thing again.
If I click "changes only" it doesn't work.
The this occurs only if I upload to mobile me, when I used another
ftp server the "changes only" worked perfect. But I want to use mobile me
because of other reasons.
Funny that the iweb synchronising does not work at the page it was built for
If you add a password, it should not re-publish the entire page, and I am having trouble with it re-publishing the entire site..
Brian
Similar Messages
-
ADF button submits the whole page even on partial submit=true
my jdev version 11.1.1.5.0
I hav a jspx page with two input boxes and three select one choice and a clear button
on clicking the clear button it subimts the whole page and fetches value for select one choice mapped to manage bean everytime even on putting partial subimt=trueTwo years ago I was confused by the same behavior, so I researched the problem to come eventually to the conclusion that everything had been fine and in accordance to the documentation.
In brief, it is correct behavior a button to submit the whole page even if the button is configured as partialSubmit="true". Please, refer to these articles in the documentation for clarification:
Using the JSF Lifecycle with ADF Faces - 11g Release 1 (11.1.1.7.0) ("4.3 Using the Opimized Lifecycle")
Handling Events - 11g Release 1 (11.1.1.7.0) (See topic "5.1.1 Events and PPR" only)
It is seen from the second article that command components (e.g. a command button, event type "action") are not event roots, which means that the whole enclosing page "boundary" is submitted. If the button is a part of a subform (<af:subform>), a region, a popup or a PanelCollection, then the boundary is the corresponding subform, region, popup or PanelCollection, so only this part of the page is submitted and processed by the optimized lifecycle. However, if the button is not part of such component, then the whole page is submitted and processed by the lifecycle (even if the button is configured as partialSubmit="true"), but only the partial targets of the button will be refreshed on the screen (if the button is configured as partialSubmit="true").
If you want your button to submit only a part of the page, then the easiest correct way to do that is to surround that part with <af:subform>.
Dimitar
P.S. Input and selection components have different PPR behavior from command components. It is seen from the second article above that all the input and selection components are event roots (in contrast to command components!) (see event type "valueChange"), so if some input or selection component is configured as autoSubmit="true", it will not submit the whole page but only itself and the components configured as partial targets of it. -
I am unable to update iOS 6 or 6.0.1 on my Iphone, even with wifi ON! Help please...
I am unable to update iOS 6 or 6.0.1 on my Iphone, even with wifi ON! Help please...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
i want to downgrade my 2011 mac mini server to mac os x i have the disks but the mini willl not reboot the apple changing to a circle with a line please help-
bpruse, I may be completely off-track for your issue, but I had a similar situation where I wanted to downgrade a Mac Pro from Server to plain OS X and it would not boot from the OS X install disk.
I was attempting to use a full-install OS X.6.x disc with an earlier SL version than that which originally came installed on the Mac Pro. After two or three hours of fiddling, I figured it out and used the discs that came with the system.
However, I don't know how that would work in your case if this is the mini server-version. I'm sure the disks would only have Server on them. Worse-case scenario, find out which X.6.x the OEM disc is installing and get an OS X disc with a new installer.
HTH.
lnail -
I am unable to open some of apps, even one inbuilt app like camera, Example : regarding apps like Clash of clans and Bike race TFG.whenever I try to open these games, it start opening and in middle of opening , it sent me back to home page of my mobile. Please help what to do ?and with camera it open a blank black page ...... Please help ?
AmishCake has given you the correct steps for this issue. What is probably happening is you have too many apps running in the background or the ones that you have open are conflicting in some way with the one you are trying to use, so closing everything out and a good reboot should resolve it.
Also, make sure your device is updated and all the apps are updated. Sometimes when the app is updated and the iOS is not, can cause behaviour like this.
If it continues, back up your device and restore it.
http://support.apple.com/kb/ht1414 -
i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.
I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot. -
My instagram account won't link in with my iphone please help
my instagram account won't link in with my iphone please help... I can't upload any of my photos to instagram
Won't like to what? Are you saying you can't access your camera roll from the Instagram app? Check Settings>Privacy>Photos and make sure Instagram is set to "On". You can't use the share button from a photo in your camera roll to post a picture to Instagram if that's what you're trying to do. That's not a feature of iOS.
-
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116did you find a fix?
-
My Ipod wont Sync with ITunes! Please Help!
My Ipod wont Sync with ITunes! Please Help! I have the latest version of Itunes, but my ipod will not sync with my laptop. The diagnostic test has no answers and says everything is normal. When i try to sync, it says "an unknown error occurred (-39)". Any suggestions?
check for any viruses
-
My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....
No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.
-
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express. -
Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello, I have a MacBook pro retina 13" early 2013, 2,6 GHz Intel Core i5 and Intel HD Graphics 4000 1024MB,
and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!Hello, Righten.
Thank you for visiting Apple Support Communities.
I understand that you want to know if your MacBook Pro will support a 4k display. Here is an article that will answer your question.
Using 4K displays and Ultra HD TVs with your Mac
Cheers,
Jason H. -
The "From" column in my Yahoo! e-mail account is blank. I trouble-shot it with them to no avail and they determined it was probably an issue with Firefox. Please help it has been like this since Monday! Furthermore, it appears fine when I view my Yahoo! e-mail while using the Google Chrome web browser.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Maybe you are looking for
-
How do I report on which release code released a Requisition?
I need to create a report that shows all the requisitions created last month and which release code approved them. I know I can join EBAN and T16FS to see the codes that CAN approve, but I need to know which one DID approve. We only require one of
-
HT1296 If I restore my iphone will it erase everything on my phone
If I restore my iphone will it erase everything on my phone?
-
ITEM in TRANSFER PROCESS_Alert monitoring
Dear Gurus, I am facing next issue: SC got stacked in the status: ITEM IN TRANSFER PROCESS. We have find out root cause: IPC server was down when last approver was approving. Error message is displayed in the alert monitor under loc
-
Import parameter shall be same type like select option
Hey guys, how can i make it possible that my importparameter of my FB has the type of the select option field of my program?? I need something like a tabletype or a list of values. Thx
-
Basic Apple applications won't open on Mac Pro after Mavericks upgrade
Hi, I'm having issues opening a number of basic applications including Quicktime and Itunes Through the App store I have updated everything, the last one I was holding out on was updating Itunes. I did that last night and now today Itunes won't open.