.alx and .cod installation files

Hello Team,
We are looking for .alx and .cod file for Facebook and Twitter apps. Though, these are available as a freeware, the usage will be for corporate use and hence due to security threat, we cannot download it from world wide web.
Can you assist us, how can we purchase the installation files form authorized sources? Your assistance will be appreciated.
Thank You.
Regards,
Ashish

Guys,
Does any one have an idea, how to procure these installation files?
Thank You.
Regards,
Ashish

Similar Messages

  • BOBJ Edge Planning and Consolidation Installation files

    Hello,
    I've been trying to locate the installation files for SAP BusinessObjects Edge Planning and Consolidation application, in the support download center, but I can't find it. SAP Note # 1336043 has this as the location
    Installations and Upgrades > Installations and Upgrades - Entry by Application Group > SAP Application Components > SAP PLANNING AND CONSOLIDATION FOR MICROSOFT > SAP PLANNING AND CONSOLIDATION 7.5 FOR MICROSOFT > Installation.
    However, "Entry by Application Group" is no longer available, and SAP PLANNING AND CONSOLIDATION 7.5 is nowhere to be found.
    If anyone knows whre to look I'd appreciate your help,
    Regards,
    Ricardo Sada

    Hi Nicola,
    Have you disabled UAC on your terminal server ?
    Is this Windows 2008 Terminal Server ?
    Have you tried to install the client from the installation file and not from the browser page.
    For example, on your BPC server which has the Web Server role, in the PC_MS WebServer directory, there should be an installation folder with the executable files for the BPC and admin client. You can try to install BPC using the executable installation files.
    If UAC is still enabled, try to run the installation as Administrator, right click on the file and "Run As Administrator"
    Hope this helps.
    Kind Regards
    Daniel

  • CS 5.5 and CS6 installation files

    I'm moving to a new machine. I wanted to install old versions so I can backsave. I managed to get CS4 installed (CS3 wouldn't install on Windows 7), and then CS5 installed from the original CDs. I must have downloaded CS5.5, and I'm sure I downloaded CS6. I can't find the original installation files for CS5.5 and CS6. I can't believe I deleted them. I must just have put them somewhere difficult to find. Does anyone know the filename of the original CS5.5 installation exe? Or if Adobe makes this available for download somewhere? I'm downloading the trial version of CS6 now, and I think I should be able to enter my license and activate it (right?).
    Ken Benson

    Correct on CS6. For CS5.5 see this link and follow the directions exactly:
    http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
    Bob

  • Confuse between SAP Kernel and SAP Installation file

    Dears:
    My CPU is ADM 64 bit, but when i try to download the ECC5 which will be installed in linux 32 bit system from SAP site, i find the confuse between SAP Kernel and SAP instllation file.
    1. In the ECC5 download page, i can see lots of oracle download file, some named DVD ORACLE RDBMS 10.2 LINUX_IA32 1 of 4 , some named Oracle 10.2.0.2. for LINUX32. So if the LINUX_IA32 is only for the CPU which is Itanium CPU?
    2. I check the sap update kernel, SAP Kernel 32 bit unicode is devided by sap kernel 6.4 320-bit unicode---Linux on IA 32-bit, so if my CPU is AMD 64 bit, but my os is Linux 32 bit, if the upgrade kernel file Linux on IA 32-bit can be used for Linux 32 bit system whith 64 bit CPU, or if the Linux on IA 32-bit is just for Itanium CPU?

    Hello again
    I just checked the pam again, and it looks like i got it wrong. There is still 32-bit available for ECC5.
    ORACLE 10.2       LINUX REDHAT EL5/IA32 32BIT  24.07.2007  Released SAP KERNEL 6.40 32-BIT
    So technically it should be possible to install it the way you wanted. Sorry for my misleading post (but hey you should still consider using 64-bit :-).
    Best regards, Michael

  • Error while converting jad and jar to alx and cod files

    hi all,
    i am getting an error while converting jad and jar files into cod and alx files for balckberry.. here is the error i am getting.. can anyone help me this regard...
    Parsing classfile: txtCanvas.class
    I/O Error: Import file not found: d:\Research In Motion\BlackBerry JDE4.6.0\lib\
    net_rim_api.jar
    thanks in advacne
    pallavi

    thank you very much for your responses. can i send my cod and alx files to check. if you are interested only.
    here is the command which i used to convert my jad and jar files
    D:\Research In Motion\BlackBerry JDE 4.6.0\bin>rapc import="d:\Research In Motio
    n\BlackBerry JDE 4.6.0\lib\net_rim_api.jar" codename=MoBilalMIDlet -midlet jad=M
    oBilalEnglish.jad MoBilalEnglish.jar

  • CS4 and CS5 installation files

    Hello,
    I've written an extension in two versions - one for PS CS4 (packed with Extension Manager CS4), one for PS CS5 (packed with Extension Manager CS5).
    The CS5 .zxp file correctly opens EM CS5, that installs it in PS CS5. Fine.
    In a computer where both Creative Suites are installed, I've found that the CS4 .mxp installer is by default opened by EM CS5, which puts it in PS CS5 even if the CS4 extension won't work  - this is probably "normal", but I already foresee users complain that... "it's broken/it's not there/I don't know".
    One solution is to distribute the installers with big warnings; nevertheless, is there a way to make a CS4 installer (mxp file) that will be, by default, opened by CS4 version of Extension Manager and not CS5?
    Thanks in advance,
    Davide

    In my opinion, there is no final solution. For one filename extension (*.mxp in this issue), OS can has a and only a DEFAULT handler program associated with it. If specified, OS will launch this program to open the file double-clicked.
    However, a filename extension can be associated with multiple programs. These programs will be listed after "Open with" in context menu when a file is right clicked. So the alternative is to write a reg file and import it into windows registry (if you use windows) to associate both EM CS4 and EM CS5 with .mxp. As a result, you can choose to open .mxp installer with EM CS4 or EM CS5 when you right click .mxp file.

  • Help whit GUI and code separeted files !

    Hi.. i have a problem...
    i wanna have two classes one that has the code.. and the other that as the GUI formating... so they have to comunicate..
    Example :
    Code Class
    public class EFClient   
        EFClientGUI gui;
        public EFClient(){ 
        public void dosomething(){
             gui = new EFClientGUI ();
             gui.Label1.getText(); ---> i get a nullpointexception here
    }GUI CLASS :
    public class EFClientGUI extends javax.swing.JFrame {
        public EFClient efClient;
        public EFClientGUI(String teste){      
            efClient=new EFClient();---> this will call the "code"
    private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {                                        
         try{
            efClient.dologin("Duarte","Rui");---- calls code class
         }catch(Exception ex){
             System.out.println(ex);
    }here a littel explanation :
    I run EFClientGUI ..... it calls EFClient... and designs.... tem i click the button and i trie to do the login.... the te login writes something to GUI...
    can someone help ?

    problem solved

  • How do I install an installer file for free?

    I have a pc computer windows xp and my installer file is damaged, Hoe do I install a new one.
    Right now I am unable to download and save pdf files.
    Thanks

    And exactly what product are you talking about?
    Mylenium

  • Anyone that could help me find installation files for Acrobat Standard 8?

    I am trying to find and download installation files for Acrobat Standard 8 - I have the serial number - but I can only find the files for the Professional version, unfortunately. Anyone know where I can find for Standard version?
    I have used this link but it only gives me the professional version, unfortunately:
    http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

    I believe there are no downloads available for the older versions of Acrobat Standard.

  • Using Java Embedding Unzip Code and a Trigger File in a BPEL Process

    Hello,
    Thanks in advance to anyone that contributes with any insight.  It is much appreciated.  Having said that I will get to the crux of my problem.
    I am currently using Oracle 11g.  I have created a SOA composite application that incorporates BPEL and Java.  I have the code needed to unzip and extract compressed folders.  However, when this was first built out using BPEL it automatically created a web service in the "exposed service" lane and not a file adapter which I believe is needed in order to trigger the process via a start.txt file for example.  Based on what I know ... this web service automatically connecting to the BPEL process was simply due to the order of operations, etc.  So by creating a 'read' file adapter first and then creating the BPEL process and selecting the template "Define Service Later", it does not automatcially connect the web service to the BPEL process and it will allow me to connect a file adapter to this BPEL process instead ... great.  When opening up the BPEL file I then connect a recieve component to this file adapter and configure appropriately.
    Essentially, my objective in setting up a trigger to start this unzip process is due to the BPEL process before that outputs or writes the .zip folder to the same directory that I want to poll and/or trigger via a start.txt file.  I can get this process to work with a webservice connecting to the BPEL process and by using a Java Embedded in BPEL file, which in turns calls the package/ class that has the java code needed to unzip.
    For some reason whenever I try to use a file adapter instead of the native web service that gets created (as mentioned above) it doesn't work.  It seems to build or compile just fine however, I am getting errors when I try to deploy.
    Note:  The Java code contains all the paths where the zip file is to be taken from and extracted to.  So because this is in the code I don't need the file adapter to handle this.  I just want to use the file adapter so that I can trigger the process via start.txt or something of that nature.
    Thanks to anyone that has any suggestions.
    Kind Regards,
    Kevin
    Errors when attempting to deploy are as follows:
    [04:12:54 PM] Error deploying archive sca_Job2_UnZip_rev1.0.jar to partition "default" on server soa_server1 [http://WN017A.homedepot.com:8001]
    [04:12:54 PM] HTTP error code returned [500]
    [04:12:54 PM] Error message from server:
    There was an error deploying the composite on soa_server1: Deployment Failed: Error occurred during deployment of component: BPELProcess1 to service engine: implementation.bpel, for composite: Job2_UnZip: ORABPEL-05250
    Error deploying BPEL suitcase.
    error while attempting to deploy the BPEL component file "H:\Oracle\Middleware\user_projects\domains\Dev_Acorde\servers\soa_server1\dc\soa_d78eb301-314c-422a-a748-bcfe7d0906e8"; the exception reported is: java.lang.RuntimeException: failed to compile execlets of BPELProcess1
    This error contained an exception thrown by the underlying deployment module.
    Verify the exception trace in the log (with logging level set to debug mode).
    [04:12:54 PM] Check server log for more details.
    [04:12:54 PM] Error deploying archive sca_Job2_UnZip_rev1.0.jar to partition "default" on server soa_server1 [http://WN017A.homedepot.com:8001]
    [04:12:54 PM] ####  Deployment incomplete.  ####
    [04:12:54 PM] Error deploying archive file:/C:/JDeveloper/mywork/Job2_UnZip/Job2_UnZip/deploy/sca_Job2_UnZip_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)

    Just wanted to provide a screenshot of the BPEL file as supporting documentation to better illustrate my issue.
    Thanks so much,
    Kevin

  • I have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

    i have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

    Your redemption code was used to acquire an activation code.  The activation code is what you need to use when you want to reinstall/enable the software again.  Check your Adobe account online to see if the number(s) can be found there.

  • How can I delete the update installation files? Or which files are useless and safe to delete?

    ThinkVantage System Update application will find the appropriate updates, download them and install them. This is convenient. But when it finishes the updates, it will not clean the installation files it has downloaded, which I think are not useful any more since the update installation is completed, right?
    I think the update appliction stores the downloaded files in the folder: C:\Program Files\Lenovo\System Update\ ,   this folder of mine is over 1.32GB big now. But I just don't know which files and subfolders in it are safe to delete.
    Or rather, the preload system occupies a large space on the disk. Which files are no longer used and safe to delete?
    Would any experts help with this? Thank you very much!
    Norm

    I've been experimenting. Now I figure it out. Automatic System Update downloads and stores files in C:\Program Files\Lenovo\System Update\ Sessions\, and in Sessions' subfolders, all files are not used once update is completed except those ending with .xml. Thus those unnacessary files are safe to delete.
    This is what I find out so far.
    Continuing to experiment.
    Message Edited by normyy on 05-31-2009 11:12 PM

  • Need to download installation file for photoshop elements again (formatted computer) and I have serial number but download file not appearing in my downloads/orders section of account anymore.

    Hi all I needed to format my computer and so need to reinstall photoshop elements which I purchased online. The serial number is in my account but not the installation file to download.. so can't find file to install anywhere and the email address I received from adobe in first place is no longer in use it appears ([email protected])
    Thanks,
    M

    You can download from here.
    Choose the correct version what you have.
    Photoshop Elements:  12 |11, 10 | 9,8,7

  • Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

    Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
    I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
    What can I do now that I installed the flames of **** onto my computer?

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Just completed the redemption process.  Where's the download and installation files?

    Just completed the redemption process.  Where's the download and installation files?

    Go to App Store > Purchases to check the OS X download progress. The installer is stored in Applications folder

Maybe you are looking for