Am getting message that scanner is not compatible with my macbook and to use twain software. Any suggestions?
Need help with downloading driver for scanner . Have HP M1005 MFP. Am getting message to use twain software. Any suggestions?
Your HP M1005 MFP all in one is too old and unsupported for 10.8.5
HP's site says that OS X 10.3 and 10.4 are supported. It does not, repeat, does NOT mention 10.5 much less newer.
Also there is no patch support for same on the last resort:
http://www.sane-project.org/sane-mfgs.html#Z-HEWLETT-PACKARD
Nothing on earth is as aggravating as twain drivers for scanners. Ive installed every make and model on PC and Mac, and theyre all hair-pulling-worthy.
Similar Messages
-
I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host> -
I was able to download the current version of FireFox but when I tried to install, I got a message that FireFox is not compatible with my current os. What else should I consider or try doing to get FireFox to work?
Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest
Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.
-
Trying to send "Message" on iPad 2 and keep getting message that "x" is "not registered with iMessage." Never happened on previous iPad. What does it mean and how do I solve?
Trying to send "Message" on iPad 2 and keep getting message that "x" is "not registered with iMessage." Never happened on previous iPad. What does it mean and how do I solve?
-
I download Firefox 4.o and drag to app folder then to dock. When I double click on the dock icon I get a message the forefox is not compatible with this version of OSX (which is OSX10.4.11). What gives?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I get message "your Ipod is not compatible with attached accessory"
I recently purchased a Belkin TuneBase FM for iPod to use in my car as a mount, FM transmitter, and car charger. After installing it into my car's power outlet and inserting my Ipod Video into it, I get the message "your Ipod is not compatible with the attached accessory". It does charge up my iPod battery, however my iPod screen does not display the FM frequency that the Belkin TuneBase is transmitting on and so I cannot adjust the frequency to get it to work. I have the latest version of Ipod firmware installed, I tried restoring my iPod to factory settings, nothing is working.
think that fm accessory is not compatible with 5g ipods . just check it in www.apple.com
-
I have a Macbook with 10.6.8 (Snow Leopard) and want to upgrade to Mountain Lion. When I try to download the program I get a message that says Mountain Lion is not compatible with my computer. Please help.
ML requires one of these:
You should verify if you qualify. -
"Lightning could not be installed because it is not compatible with firefox 26.0" is the message I get when I try to install the latest 2.6.4 version of lightning. I also tried the later beta test version with the same results. I am running Windows XP 32 bit with all the latest updates.
hello Waltair, lightning is a calendar-extension for the thunderbird mail client - it won't work in firefox...
-
Upgraded old Mac mini (from 10.4 to 10.6) PowerPC G4 Processor, downloaded latest version of Firefox and ran installer, got a dialogue box that said 'not compatible with this architecture', now I don't have Firefox at all, and it is my preferred browser.
Firefox '''4 versions and later do not run on a PowerPC Mac''' and require at least OS X 10.5 and an '''Intel Mac'''.
The''' latest supported version for your os is 3.6.26''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
see for more info:
[http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
[http://www.mozilla.org/en-US/firefox/10.0.1/system-requirements/ Firefox 10.0.1 System Requirements]
[For older Macs that aren't supported in Firefox 4+ versions, if you like, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8]
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
I got a message to update windows. I updated. My computer said firefox was not compatible with update. I then tried to purchase Avast and it basically crashed my computer. I had help in restoring and when system was checked it showed two different firefox downloads that had not succeeded because they were incompatible with my system. I don't know enough about computers to understand what happened. I have a Dell Studio xps with Windows 7. Thank you.
Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I have abrobat pro 9 and cannot re download
I have been told that it is no compatile with windows 7Hi ,
That is absolutely correct .Acrobat 9 pro is not compatible with Windows 7 .It might lead to certain conflicts while the downloading is in process .
You could refer the following link to get more details about the technical specifications about Acrobat 9 .
https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html
If you are on windows 7 I would recommend you to switch to the latest Acrobat DC as it has a new and interesting UI along with enhanced features that will make your work a lot simpler .
In case you have any other query ,please write back .We would be here to assist you accordingly .
Regards
Sukrit Dhingra -
I have a IPhone 3GS restored the phone as I bought it second hand. I have tried to download apps but some say it's not compatible an others say I need to update to iOS 4.3 or later. I have tried downloading this software via a computer but nothing seems to b happening ....any ideas pls??
You need to connect it to your computer and update it through iTunes.
'Over the air' updates were only introduced in iOS5. -
Am I forever done with Firefox? Im running Max OS 10.5.8
What gives? I'm not looking for the latest most inspirational release... just an alternative to Safari.
It was fully compatible up until I accidently moved the icon off my desktop. Now it's no longer in my Applications folder and is not replaceable?!!?http://www.mozilla.com/en-US/firefox/all-older.html
-
Itunes won't open. I get a message that it is not compatible,switch to English
itunes won't open. I get a message that it is not compatible,switch to English
Hey D28PICKER!
I have an article here for you that can help you troubleshoot launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thanks for using the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
I opened up my pages app and the document i needed opened up automatically, i turned away from my ipad to log onto my computer only to find when i look back at my ipad that ALL my documents have been deleted!! It is very important i get these back as
-
How do I create an effect on on object similar to this on Illustrator?
How do I create an effect on on object similar to this on Illustrator? Please see the type show in the link provided : "CHIVAS" http://2.bp.blogspot.com/-F-lpKYp-QnE/UH8jwTkTmfI/AAAAAAAAOWQ/BuN9gm9Pe5U/s1600/Chivas+log o+2012.jpg Also if anyone knows
-
I can't open my Mac. After I downloaded the update and I restarted it I can't log in
It's just in the start screen with my computers my computer's name and Guest user. With sleep restart shutdown on the bottom. Now my iPhone is lagging
-
Can I burn purchased TV programs I have bought through the iTunes Store onto DVD either to backup or to play on a DVD player?
-
Changing alarm limits in a library from within a VI
I am running LabView 8.6f1 with the DSC module on XP. I have some (network-published) shared variables defined in a project library created through the project explorer, but I would like the user to be able to change the alarm limits from within a VI