Am having difficulty uploading editorial changes to remote site ???

Edited pages in Dreamweaver do not upload to the remote site. I have been doing this for years and suddenly the changes simply do not upload.

FTP connection works
server is online
no changes to Dreamweaver
Am using CS4
David_Powers <[email protected]> wrote:
David_Powers http://forums.adobe.com/people/David_Powers created the discussion
"Re: Am having difficulty uploading editorial changes to remote site ???"
To view the discussion, visit: http://forums.adobe.com/message/4755489#4755489

Similar Messages

Links not changed on REMOTE site

I posted a message similar to this one, but for some reason I
can't get to my message and reply.
I created a site and upon finishing the webpages I 'put' the
files to 'remote' site.
Not a single link has changed to the remote URL.
It shows all 'local' links and naturally it don't work. I
have no idea what I missed but doing it several times and even
re-creating everything ... same results. This is such a simple
automatic thing with any cheap editor, but DW it's a MAJOR problem
and so complicated that it takes more time to upload then create
the whole site.
Please send me a message if possible, because I am not able
to see my own message at Adobe for some reason.
thanks :)

DW doesn't change links when it uploads. If the links are
broken locally,
the will be broken when you upload. Conversely, if they are
broken when you
upload, that means that they are broken locally too. To see
that they are
broken locally you will need to look at the code - an
absolute file:/// link
*will* appear to work locally, but it is still broken.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"webkruzer1" <[email protected]> wrote in
message
news:f4esj0$oq7$[email protected]..
>I posted a message similar to this one, but for some
reason I can't get to
>my
> message and reply.
>
> I created a site and upon finishing the webpages I 'put'
the files to
> 'remote'
> site.
> Not a single link has changed to the remote URL.
> It shows all 'local' links and naturally it don't work.
I have no idea
> what I
> missed but doing it several times and even re-creating
everything ... same
> results. This is such a simple automatic thing with any
cheap editor, but
> DW
> it's a MAJOR problem and so complicated that it takes
more time to upload
> then
> create the whole site.
> Please send me a message if possible, because I am not
able to see my own
> message at Adobe for some reason.
> thanks :)
>

Uploading error: .css to remote site

I can not upload the cascading style sheets to the remote
site when I try to "put files". I can move all other files (.html
and .jpgs).
I get the following message:
error occurred - An FTP error occurred - cannot put
.stylesheet.css. Access denied. The file may not exist, or there
could be a permission problem. Make sure you have proper
authorization on the server and the server is properly configured.
What should I do differently when saving or creating the css
for the website?

Welcome happy dreamweaver ;) lol
hey man im seeking a cool set of video tutorials to help me
better understand how to create dynamic pages end such let me know
if you have

Any one having file upload problems via webforms for site in the Australian data center or elsewhere?

For the last 3-4 weeks we have a web app that can longer upload largish files (e.g. 35mb PDF) via a web form Uploads no problem via SFTP.
Adobe so far has provided to answers and can't reproduce the problem.
Yet we (in Auckland) and our client in Wellington have the same problem.
Is there an issue with AWS Sydney, Adobe's setup or has BC introduced some new throttling or security rules around file uploads?
Any help greatly appreciated.

Hi,
Please try to use the UI element "Office Control" of a web dynpro view.
For more details, refer to the web dynpro component: IOS_TEST_HELLOWORLD_MS.
Best regards,
Shalini.

How can I change remote site definition without breaking all of the links?

I've created a website and put it here http://home.comcast.net/~alpsf/index.html to test it during construction. Now when I change the remote site definition on the local site in DW, all of the links are broken. I now suspect the problem is that I made it site root-relative, and DW inserted /~alpsf/ in all of the links. Is there a way to fix this?
Thanks very much.

You can do a find and replace to change the links globally. Make sure you do a complete backup of the site prior to doing this incase you don't do it correctly. Let me stress that again, backup your entire site incase you need to restore. If you have created a "new site" and this will not be part of the /~alpsf site, then you will need to define a new site and copy all the files into that folder (I am guessing this is the case). I would copy the files outside of Dreamweaver. You could do this without touching the files in the ~alpsf directory. There are a lot of variable here as I don't know exactly what you are doing.
On the file menu select window/results-select search. (this is done if the search window is not open).
Find in: Entire Current Local Site
Search: Source Code
Find: "/~alpsf/
Replace:"/
That should do it, but this is a very tricky thing. I wouldn't have a problem doing this as long as I have everything backed up.
Jim
Edited:You might have to go into your css, spry files and any others that has links to do the same (this time only select Find in: Current document once the document is open). Once that is done, delete the whole remote site and upload the changes once you check that everything is completed.

Help with uploading files to remote site

I am trying to upload files onto a remote site, but it keeps
timing out. Also, on my new website that i'm making for a client,
when i Put the files onto the remote site it says Started:
5/30/06 7:57 PM
index.html - error occurred - An FTP error occurred - cannot
put index.html. Access Denied. The file may not exist, or there
could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not
completed.
Files with errors: 1
index.html
Finished: 5/30/06 7:57 PM
What does this mean? why are the file incomplete?
Mike S

Have you successfully uploaded to this site before?
Is your site definition configured to upload to the proper
remote folder?
The error message is simply telling you the transfer did not
succeed
"mikesilverman22" <[email protected]> wrote
in message
news:e5im76$r17$[email protected]..
>I am trying to upload files onto a remote site, but it
keeps timing out.
>Also,
> on my new website that i'm making for a client, when i
Put the files onto
> the
> remote site it says Started:
>
> 5/30/06 7:57 PM
>
> index.html - error occurred - An FTP error occurred -
cannot put
> index.html.
> Access Denied. The file may not exist, or there could be
a permission
> problem.
>
> File activity incomplete. 1 file(s) or folder(s) were
not completed.
>
> Files with errors: 1
> index.html
>
> Finished: 5/30/06 7:57 PM
>
> What does this mean? why are the file incomplete?
>
> Mike S
>

Changing remote site definition

I am changing the domain name of my site but keeping my sites
design completely the same. After I buy the new the domain name,
how do I Change the Remote site definition in Dreamweaver 8 to use
a new site's connection info??
Can someone give me the steps?
Thanks so much!!!!!
Ryan

> I am changing the domain name of my site but keeping my
sites design
> completely
> the same. After I buy the new the domain name, how do I
Change the Remote site
> definition in Dreamweaver 8 to use a new site's
connection info??
Question:
Is the hosting changing? or just the domain name?
If just the domain name-
At the domain name Registrar's control panel, set the new
domain name up
with the DNS domain name server of your current hosting.
At your hosting- you'll need to add this new domain name to
their DNS name
servers also. Either through a hosting control panel or
through a
trouble-ticked to their help desk.
There will be no need to make any change to the site
definition in
dreamweaver, unless you change hosting to a different remote
server.

Redundant Controller at a remote site

We are implementing a number of WLCs at different sites that are connected by a WAN (site-to-site links). I'd like to use the WLC at site A as the backup WLC for site B and that at site B as the backup for site A.
I've reviewed the documents that I can find on Cisco and the threads in this forum, but haven't found a definitive guide yet - maybe I haven't recognised it.
Can anyone point me in the right direction or provide configuration advice?
Thanks in advance

The only issues with doing that is the fact that the ap's at remote A will obtain the configurations from remote B when wlc A fails. So that means that the users will associate to an ssid and be tunneled back to the other remote site and access the network from there. If this doesn't work for you then maybe having redundant wlc's at each remote site is a better option. One other thing is to configure the ap's in h-reap mode and have all the wlc's centrally located.

ATV having difficulty receiving commands from remote

My AppleTV is hooked up by HDMI to a Samsung HDTV (model code LNT2653HX/XAA). I've been having a lot of difficulty using the Apple remote with my ATV. Because the unit is in close proximity to my MacBook and Universal iPod Dock (meaning I have 3 Apple remotes lying around), I had to pair each remote to each device so there would be no interference. This did not help my issue, and even after tried unpairing the remote or changing which remote worked with which device, the problem persisted. When I press a button on the remote, the ATV rarely responds (i.e. responds to 1/20 clicks), and there has appeared no rhyme or reason to when it does or does not work.
I have noticed, however, that clicking the Apple remote will occasionally cause a light on the TV to blink as if it were receiving a command. Interestingly, when the TV is turned OFF, the AppleTV has no difficulty receiving commands (as evidenced by the white light blinking each time a command is received).
Now this may very well be an issue that can only be solved by dealing with the TV itself, but is there any recourse available otherwise?

Hi.. I'm having the same problems described, with my Apple TV and using the remote. I have the G1 model of the Apple TV, and have been using it without issue for a couple of years. Just bought a new Samsung LCD TV Series 8, 40" and soon after I attached the Apple TV I started to have issues. Now the Apple remote almost never responds. I have paired it, repaired it until I'm sick. I did a factory reset on the Apple TV.. and the remote worked just fine, until I upgraded the software on the Apple TV to get back all the functionality (iTunes Store, using my iPod-remote, etc.). The problem is the remote seems to work for a second.. then stops-freezes. I suspect it has something to do with both the TV and the software upgrade. Is it possible that the Samsung TV is sending out IR signals that swamp the room? Or that when I hit the Apple Remote, the TV replies.. and confuses the Apple TV? I moved the Apple TV as far away from the Samsung as I could.. but nothing helps. Very frustrating!!! Any ideas? Oh by the way.. I also can't get the Apple TV to pair with another remote. It stalls each time about 20% of the way.. never moving forward. The lack of a remote.. makes the Apple TV a paperweight.. sad.. because before it was one of my favorite Apple products. HELP!

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

How do I change the assigned site code on a REMOTE client via WMI (C#)?

Hi
I was wondering if it is possible to change the site code on a client remotely via WMI. I have found one or two links to this, eg
http://msdn.microsoft.com/en-us/library/jj874135.aspx
and
http://social.technet.microsoft.com/Forums/systemcenter/en-US/67b671bb-4819-4e7a-a4f6-6cb7ded17722/sccm-2007-change-assigned-site-code-on-clients?forum=configmgrgeneral
However none of these will allow me to change it remotely directly from my machine. I have written a tool which fixes many issues but having difficulty with this one. In the past I have even resorted to copying a script remotely to an affected machine then
setting a remote scheduled task which executes the script. This was effective but very dirty! I find it difficult to believe there is no way to do this directly but can't seem to find anything suggesting it is possible.
Before anyone replies with a 'what are you trying to achieve...' type answer, I have a similar situation to that of the guy in the second link but I would like something more instant.
Many thanks

psexec or winrm will allow you to do this.
Jason | http://blog.configmgrftw.com

I'm having trouble uploading my macfamilyTree 7 database to iCloud. It seems stuck on 6 %

I'm having trouble uploading my macfamilyTree 7 database to iCloud. It seems stuck on 6 % I can see the storage value has changed in iCloud on my devices but I cannot see my upload or access it.

I have this problem as well and the MacFamilyTree developers have been unable to help. It appears to be related to the media attached to a family tree. If you have a family tree without any media attached then it will upload without any issues, however more than around 5MB of files seems to stop this. The file size in icloud appears correct but according to mft 7 the upload is still taking place.
If anyone has any suggestions....

I'm having problems uploading video taken with my iPhone 4 to Photobucket. FB will not accept the file extension which is ex. IMG_423. They will play on my computer and will upload to Facebook. Why is the phone taking video with this file instead of so

I'm having problems uploading video taken with my iPhone 4 to Photobucket. FB will not accept the file extension which is ex. IMG_423. They will play on my computer and will upload to Facebook. Why is the phone taking video with this file instead of something like .mov or mp4. How can I change the extension after the fact and avoid it in the future?

You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

My clients are having difficulty reading PDF contents

When I upload PDF on my site Apple Repair Club - Midtown Manhattan, NY - (800) 521-6181, my clients can not read using Adobe PDF Reader. I am having difficulty in posting web instructions on posts or pages. Now, I'm using plain text posting rather than PDF. The purpose of PDF files directory in posts is that I can manage 100s of them in a single page and this is quite easy to browse and download when necessary. Not being able to view PDF on site pages or posts is an inherited domain or hosting issue or the issue of PDF reader - I'm kind of not sure about it. When I talk to the hosting provider, I'm assured that it should not be the issue at the hosting end. When I upload contents, I can view from Safari 7.1.3, Chrome 41.0.2272.89 and Firefox 36.0.3. I'm a Mac user and have not tested from IE. When clients browse, they are thrown error that the contents are corrupted or not available. I have not investigated clients' browser versions though. Is this because of the non-supported browsers? Or an issue seen somewhere else as well? I didn't find trending concerns on such issues on the forum. Any instructions or advise is highly appreciated.

I was able to subscribe in iTunes and download the episodes perfectly well. However the connection is quite slow. It took over two minute to download each episode - they are only around 8Mb each so it should only have taken a few seconds.
Similarly when I checked the feed in Firefox there was a delay of some seconds before it loaded. My own connection is 100Mb/s so it's not me!
It looks as if the GoDaddy server may be rather slow to respond sometimes - either that or something in the connection from there - and possibly it's sometimes slow enough to time out iTunes.

Im having trouble making some changes to our webite. Im using DW CC 2014, 8.1 , HP Pavillion pc. Id be happy to pay someone to help.

im trying to make some changes on our website (oilfiltercrushers.com). Im using DW CC 2014, 8.8, HP Pavion pc. The problems include:trying to move an image farther to the left & also to remove too much vertical space, trying to remove "AAAs tht show up on a webpage table even they don't show on the local file that was put, a webpage that I cant see on the website even though it was put & appears in the remote files folder. Id be happy to pay someone to help me fix these problems. Thanx, Paul ([email protected], 4146514636)

Hi Nancy
Thanx for your response and commenting on our homepage. I wasn't aware of the problems you mentioned. However it has ranked on the first page of Google, etc for 20 years, so that's not my concern at this point.
The 2 most immediate things are getting rid of the A"s showing up on the table on oilfiltercrushers/truck_ofc.aspx and on /defaultnew.aspx , (the intended home page when I get it fixed,) I get a server error highlighting line 293
&nsp;
. Im not sure what to do about that...
I hope you can help me with this. If its more convenient, you can call me at 414-651-4636. I'll pay you for your input.
Paul
I look forward to hearing from you.
Paul
"Nancy O." <[email protected]> wrote:
Nancy O. created the discussion
"Im having trouble making some changes to our webite. Im using DW CC 2014, 8.1 , HP Pavillion pc. Id be happy to pay someone to help."
To view the discussion, visit: https://forums.adobe.com/message/7034503#7034503
>

Am having difficulty uploading editorial changes to remote site ???

Similar Messages

Maybe you are looking for