Am having thousands of unsolicited emails coming into my computer

I am receiving "Return to sender" emails (over 1,000 each day). I have not sent any of these emails, and they have attachments that they want me to open, but have not opened any of them. How can I stop this from happening? This began over the weekend.

You appear to be receiving a load of junk.
Do not respond to any of these emails. Do not open any links, attachments etc.
Check you junk controls are correctly setup.
* http://kb.mozillazine.org/Junk_Mail_Controls
When settings up Junk, do the following and in this order:
'''1. Set up preferences in:'''
* Tools>Account Settings >Junk Settings
Check the following:
* Selected: Enable adaptive Junk Mail controls for this account
* Selected: specific address books (double check that you have not got unwanted email addresses in your various address books)
* Do Not select: Trust Junk Mail Headers - leave this for now
* Select: Move New Junk messages to
* Select: Junk folder on and the appropriate account
Note: You can choose to send to Trash folder, but if some emails marked as Junk, but are not Junk go direct to trash you may miss them or even delete without realising they are good.
Do not set the auto delete after 'x' days just yet until you are sure it is working correctly - you do not want to lose emails that need to be trained as not junk.
* Click on 'OK'.
'''2. Set up default settings for Junk.'''
* Tools> Options >security > Junk tab
note: if you have more than one account and have setup all emails to go to Local folders so that you view everything in one place then do not set up - leave unticked the 'when I mark messages as junk'
* Select: when I mark messages as junk
* Select: move them to the accounts 'Junk' folder
* Do not bother with marking Junk messages as read because you may need to read and select some as Not Junk - they are then returned to the Inbox in an unread state.
* Select: enable Junk filter logging - useful if you need to know what the filter is doing at a later point.
* Click on 'OK'
'''3. Train the Junk filter'''
In the begining, for each email, you would need to select whether it is Junk or Not Junk. Remember to check the Junk folder for legit emails and reset them as Not Junk.
soon the Junk learns your preferences.
'''If you wish to reset everything and retrain the Junk.'''
* Tools> Options >security > Junk tab
* and click on the 'Reset Training Data'
* then work through the instructions above.

Similar Messages

HT1338 Several times I have tried to send a copy of a picture by email, and it gives my email address as that of my nephew? Without his password, I can't email from photostream?? I don't know how his email got into the computer. Please help?

whenI attempt to send a picture from iphoto by email, my newphews email address is in the place of mine and I can't send the picture without his password to Hotmail account. I don't know how this could have happened, but has occurred several times. How do I get him off my computer so I can proceed? The computer will not let me change his email address while in the iphoto picture window.
thanks
MRL

Check your System Preferences > Internet & Wireless section to see what the settings are?

I have an Epson NX420 printer/scanner, and I keep getting a message on the scanner, saying that there is a communication error, check the connection. I am not having any luck scanning my pictures into the computer.

I have an Epson Nx 420/printer/scanner, and I keep getting a message that says there is a communication error. Check the connection [W-61}. I have the snow leopard operating system Mac OS X 10.6.8 I want to scan my pictures into iphoto. Can someone please tell me what I am doing wrong. Thankyou.

Make sure you have updated all of your scanner drivers. Check Software update and check with Epson tech support.
Not sure if the Gutenprint and Gimp-Print for Mac OS X (10.2 and later) drivers deal with scanners. Read the info on their website.
Check Apple's Knowledge Base for Snow Leopard & Lion Printer solutions and suggestions for scanner troubleshooting. Especially if you have an all in one.

Emails will not stop coming into Inbox. Even when deleted duplicates reappear over and over.

I am trying to find out how to stop this. It happens with all of my mail accounts, not just one.
I have tried deleting the accounts and setting them up again, but I have the same problem.
All of my new mail will load, over and over, this never stops unless i 'take all accounts offline'. I have been unable to check my emails due to the volume of emails coming into my inbox.
Any help would be greatly appreciated, thanks!

What kind of account? IMAP, POP, Gmail?

Sales contracts could not coming into the KE24

Hi,
Only sales contracts(VA43) not coming ito the KE24
But whenever we created the sales order with reference to the sales contracts then that time its appearing into the ke24
why only sales contracts(do not having the Sales orders) not coming into the KE24
Is it requires any config for this

Hi
Contaract is not standard charactor in co-pa thats y only contract it won be appear in the ke 24 report . if you are using contract with reference to sales order when you are doing the billing system it will take both sale order and coanaract fields it will update in co-pa .
If you want to take contaract in to co-pa without sales order u have to create charactor strics dervation rule in KEDR transaction then it will update in copa .

I am sending an email from one account on iphone 4s but the replies are coming into another account on my phone

I have had an iphone 4s for about a year and have 4 email accounts that come in on it: verizon, gmail, my work, and icloud. Periodically, I send an email from one account, it shows the message as sent from that account in my sent mail, but the recipient receives it from the gmail account and therefore replies to the gmail. Has anyone had this happen? It is almost as if my messages are bouncing into gmail when I send them, although on my phone it shows as having been sent from another account. I have not had this happen on my computer where I have all of these emails coming in as well. I thought perhaps it was me not being careful about which account I was sending from when using my phone, but the mail I sent this morning I was very careful to make sure was from verizon, the sent mail on my phone shows it was sent from verizon, and the reply came in on gmail. Gmail isn't even the default email address- verizon is! My iphone is using version 6.1.3. Does anyone have any ideas? This is a major problem for me so I appreciate any ideas! Thank you!!!

I am not sure whether this is related, but I had a problem with Gmail where each time I sent and email via my iPhone it would bounce back in my Gmail account as unread. You migh want to check this Google article explaining why this happens and how to avoid it:
https://support.google.com/mail/answer/1710338?ctx=gmail&hl=en-GB&authuser=0

I am having a problem with email, when I delete messages from my Ipad, they come back into trash whether they are on my PC or not. The only way I can delete them is to to my providers site and delete everything there.

I am having a problem with email. I can receive and send, but when I delete, the deleted messages return into either Trash or Bin or both whether or not I have deleted them from my PC.
The only way I can get rid of them permanently, is to go into my area of my providers site(Sky) and empty all of the boxes there. I imagine it's a setting, please advise.

For IMAP mail only.
Settings>Mail, Contacts, Calendars>tap on mail account>Archieve Messages>OFF

Outlook Add In - Hook into delete event without having to open the email.

Is it possible to hook into the BeforeDelete command without having to open the email to fire the event. At present my code will hit the BeforeDelete event when the email is open and delete is selected, but it does not fire if deleting without opening
the email.

Below is the Property MailItem I have in a class called MailItemContainer:
/// <summary>/// Gets or sets the Mail Item property/// </summary>public Outlook.MailItem MailItem
            get
                returnthis.mailItem;
            set
                if (this.mailItem != null)
                    try
                        ((Outlook.ItemEvents_10_Event)this.mailItem).Forward -= new Outlook.ItemEvents_10_ForwardEventHandler(this.MailItem_Reply);
                        ((Outlook.ItemEvents_10_Event)this.mailItem).Open -= new Outlook.ItemEvents_10_OpenEventHandler(this.MailItem_Open);
                        ((Outlook.ItemEvents_10_Event)this.mailItem).PropertyChange -= new Outlook.ItemEvents_10_PropertyChangeEventHandler(this.MailItem_PropertyChange);
                        ((Outlook.ItemEvents_10_Event)this.mailItem).Reply -= new Outlook.ItemEvents_10_ReplyEventHandler(this.MailItem_Reply);
                        ((Outlook.ItemEvents_10_Event)this.mailItem).ReplyAll -= new Outlook.ItemEvents_10_ReplyAllEventHandler(this.MailItem_Reply);
                        ((Outlook.ItemEvents_10_Event)this.mailItem).Send -= new Outlook.ItemEvents_10_SendEventHandler(this.MailItem_Send);
                        ((Outlook.ItemEvents_10_Event)this.mailItem).Unload -= new Outlook.ItemEvents_10_UnloadEventHandler(this.MailItem_Unload);
                        ((Outlook.ItemEvents_10_Event)this.mailItem).BeforeDelete -= new Outlook.ItemEvents_10_BeforeDeleteEventHandler(this.MailItem_Delete);
                    catch
                if (value != null && !value.Equals(this.mailItem))
                    this.mailItem = value;
                    ((Outlook.ItemEvents_10_Event)this.mailItem).Close += new Outlook.ItemEvents_10_CloseEventHandler(this.MailItem_Close);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).Forward += new Outlook.ItemEvents_10_ForwardEventHandler(this.MailItem_Reply);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).Open += new Outlook.ItemEvents_10_OpenEventHandler(this.MailItem_Open);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).PropertyChange += new Outlook.ItemEvents_10_PropertyChangeEventHandler(this.MailItem_PropertyChange);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).Reply += new Outlook.ItemEvents_10_ReplyEventHandler(this.MailItem_Reply);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).ReplyAll += new Outlook.ItemEvents_10_ReplyAllEventHandler(this.MailItem_Reply);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).Send += new Outlook.ItemEvents_10_SendEventHandler(this.MailItem_Send);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).Unload += new Outlook.ItemEvents_10_UnloadEventHandler(this.MailItem_Unload);
                    ((Outlook.ItemEvents_10_Event)this.mailItem).BeforeDelete += new Outlook.ItemEvents_10_BeforeDeleteEventHandler(this.MailItem_Delete);
        }I have an Outlook AddIn which code is below:/// <summary>
/// Mutex to control loading and new mails
/// </summary>
private System.Threading.Mutex mutexLoad = new System.Threading.Mutex();
/// <summary>
/// Gets or sets the mail item list
/// </summary>
internal List<MailItemContainer> MailItemList
    get;
    set;
/// <summary>
/// Checks the list to see if the item has already been registered.
/// </summary>
/// <param name="findItem">The <typeparamref name="Outlook.MailItem">MailItem</typeparamref> to find.</param>
/// <returns><c>True</c> if found, <c>False</c> if not</returns>
public bool ContainsMailItem(Outlook.MailItem findItem)
    var found = false;
    foreach (var item in this.MailItemList)
        found = item.MailItem != null && item.MailItem.Equals(findItem);
        try
            found = found || (!string.IsNullOrWhiteSpace(item.MailItem.EntryID) && item.MailItem.EntryID.Equals(findItem.EntryID));
        catch
        if (found)
            break;
    return found;
/// <summary>
/// Finds the container for the mailitem in the list if the item has already been registered.
/// </summary>
/// <param name="findItem">The <typeparamref name="Outlook.MailItem">MailItem</typeparamref> to find.</param>
/// <returns>The MailItemContainer object that is used to extend the mail item</returns>
public MailItemContainer FindMailItem(Outlook.MailItem findItem)
    MailItemContainer mailContainer = null;
    foreach (var item in this.MailItemList)
        if (item.MailItem != null)
            if (item.MailItem.Equals(findItem))
                mailContainer = item;
            else
                try
                    if (!string.IsNullOrWhiteSpace(item.MailItem.EntryID) && item.MailItem.EntryID.Equals(findItem.EntryID))
                        mailContainer = item;
                catch
            if (mailContainer != null)
                break;
    return mailContainer;
/// <summary>
/// This will attempt to get the default values for the user and bind to the outlook events.
/// </summary>
private void InitialiseAddIn()
    var success = DA.SQLDataSource.IsDBConnectionValid();
    if (success)
        Utility.UserUpdated -= new EventHandler(this.Utility_UserUpdated);
        try
            Utility.User = DA.User.GetUserByUserId(Utility.UserId.GetValueOrDefault());
            success = Utility.User != null;
            if (success)
                Utility.Department = Utility.User.Department;
                success = Utility.Department != null;
                if (success)
                    this.MailItemList = new List<MailItemContainer>();
                    // Add a handler when an email item is opened
                    this.Application.ItemLoad += new Outlook.ApplicationEvents_11_ItemLoadEventHandler(this.ThisApplication_ItemLoad);
                    // Add a handler when an email item is new
                    this.Application.NewMailEx += new Outlook.ApplicationEvents_11_NewMailExEventHandler(this.ThisApplication_NewMailEx);
                    // Add a handler when the selection changes
                    this.Application.ActiveExplorer().SelectionChange += new Outlook.ExplorerEvents_10_SelectionChangeEventHandler(this.ThisAddIn_SelectionChange);
                else
                    MessageBox.Show("Your department has not been selected. Click on the \"Call Centre\" option on the menu and press the \"Settings\" button to select your department.", "PSP Call Centre Tracker");
            else
                MessageBox.Show("Your user profile has not been set up yet. Click on the \"Call Centre\" option on the menu and press the \"Settings\" button to select your department and create a profile.", "PSP Call Centre Tracker");
        catch
            MessageBox.Show("Call Centre Tracker was unable to communicate with active directory.\nTracking will not be enabled for this Outlook session.", "PSP Call Centre Tracker");
    else
        MessageBox.Show("Call Centre Tracker was unable to communicate with database.\nTracking will not be enabled for this Outlook session.", "PSP Call Centre Tracker");
    Utility.UserUpdated += new EventHandler(this.Utility_UserUpdated);
/// <summary>
/// The event that fires when the add-in is loaded
/// </summary>
/// <param name="sender">The object that fired the event</param>
/// <param name="e">The evetn args</param>
private void TrackingAddIn_Startup(object sender, System.EventArgs e)
    this.InitialiseAddIn();
/// <summary>
/// This fires when the add-in is closed
/// </summary>
/// <param name="sender">The ibject that fired the event</param>
/// <param name="e">The event args</param>
private void TrackingAddIn_Shutdown(object sender, System.EventArgs e)
    this.Application = null;
/// <summary>
/// Handles the event when the User has been changed.
/// </summary>
/// <param name="sender">The object that raised the event</param>
/// <param name="e">The default event arguments</param>
private void Utility_UserUpdated(object sender, EventArgs e)
    this.InitialiseAddIn();
/// <summary>
/// This is the application_ item load.
/// </summary>
/// <param name="item">The mail item.</param>
private void ThisApplication_ItemLoad(object item)
    if (item is Microsoft.Office.Interop.Outlook.MailItem)
        Outlook.MailItem mailItem = item as Outlook.MailItem;
        try
            this.mutexLoad.WaitOne();
            if (mailItem != null && !this.ContainsMailItem(mailItem))
                this.MailItemList.Add(new MailItemContainer(mailItem, this));
        finally
            this.mutexLoad.ReleaseMutex();
/// <summary>
/// Thises the application_ new mail ex.
/// </summary>
/// <param name="entryIDCollection">The entry ID collection.</param>
private void ThisApplication_NewMailEx(string entryIDCollection)
    var idCollection = entryIDCollection.Split(',');
    var sentFolder = this.Application.Session.GetDefaultFolder(Outlook.OlDefaultFolders.olFolderSentMail);
    var inboxFolder = this.Application.Session.GetDefaultFolder(Outlook.OlDefaultFolders.olFolderInbox);
    foreach (var entryId in idCollection)
        var item = this.Application.Session.GetItemFromID(entryId);
        if (item is Outlook.MailItem)
            var mailItem = item as Outlook.MailItem;
            var parentFolder = Utility.GetTopLevelFolder(mailItem);
            if (parentFolder != null && parentFolder.EntryID == inboxFolder.EntryID)
                var referenceCode = Utility.MatchSubjectReference(mailItem.Subject);
                try
                    this.mutexLoad.WaitOne();
                    var containerItem = this.FindMailItem(mailItem);
                    if (!DA.TrackingItem.ExistsByReferenceCode(referenceCode, mailItem.ReceivedTime))
                        if (containerItem == null)
                            containerItem = new MailItemContainer(mailItem, this);
                            this.MailItemList.Add(containerItem);
                        containerItem.IsNewItem = true;
                        containerItem.TrackingItem = Utility.RegisterMailIncoming(item as Outlook.MailItem, this.Application);
                finally
                    this.mutexLoad.ReleaseMutex();
    ////Insert into Detail file and get the refence number
    ////MailInsert("Incoming");
/// <summary>
/// This action fires when the selection changes
/// </summary>
private void ThisAddIn_SelectionChange()
    var unread = this.MailItemList.Where(d => d.IsNewItem && d.MailItem.UnRead).ToList();
    foreach (var item in unread)
        item.DoUnReadCheck();

TS3276 why the emails keep coming into my inbox after I delete them?

My emails keep coming into my inbox after I deleted them. Why is that?

It sounds like your ISP's Mail Server is an IMAP type that retains the Mail on the Server. You need to go into your Mail> Preferences>Accounts> and set the Mail to Delete from the Server, after a set amount of time.
Hope this helps

HT4528 i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

No. But thank for asking.

How can I limit the number of messages coming into my email accounts on the IOS7

I don't like the new IOS7 system most annoying is the excess battery useage and need to recharge the other is I can no longer limit the number of emails that are in my cell's email accounts old system let you choose the amount of messages.
already did the basic things to eliminate battery drainiage getting rid of open pages which was also annoying to figure out how to use as you can't simply click and hold then delete all open apps running in the back ground you must touch and slide them off the phone. I don't let apps do auto updates.
They need to do something about the battery and having to have all emails on the phone which likely is sucking up space.
Any suggestions?

I don't think it matters what you use as your email client. This is a feature that existed before and was missed in the upgrade to IOS 7. I read on another post that if you contact Apple support they just tell you to report it in Apple feedback. I just submitted feedback at http://www.apple.com/feedback/ I couldn't find an IOS section to post it to, so I just posted it in the iPhone section. Maybe if enough people do this, Apple will fix it.

My iPhone 4s isn't coming up on iTunes when I plug it into my computer even though it's being recognised by the computer because a noise is being made when I plug it in!! How do I fix it??

I've just been given a perectly working iPhone 4s which I have set up without having to plug it into a computer. The computer is recognising that something has been plugged in becasue of the noise it's emitting however it's also not coming up in 'My Computer'. How do I connect my iPhone to my iTunes as I have music to put onto it before the beginning of school?? I have uninstalled iTunes and re-installed it again but it's not having any affect and I have the most up to date iOS on the phone and on the iTunes.

Yes, to an extent. But not to the extent that it is actually viewable under 'My Computer'.
Read these threads: https://discussions.apple.com/thread/3936926?start=0&tstart=0
https://discussions.apple.com/message/19109196#19109196
https://discussions.apple.com/thread/3937342?start=0&tstart=0

Mail: How do I collect a bunch of email messages into one document?

After 5 years of collecting the email messages on an application we are making I need to collect all these emails into several documents (pdf would be nice). One for out going, incoming, etc.
I guess I was thinking I would just save as pdf for each message not thinking that the project would go on for these 5 years. I have quite a few docs, now, several hundred, might be over a thousand once I start looking into everything.
Running:
Snow Leopard 10.6
Mail 4.6
on a gmail account if that matters.
Thanks Ken

Nice and easy, thanks.
Is there anyway to retain the subject line as the file name like when you save as pdf for a single message?
When I save multiple messages in this manner I am asked for a file name before the save button activates. The save then titles each file xxx-1, xxx-2 and so on.
Ken

I have a laptop with microsoft outlook for work emails, and an ipad (with IOS 7.1) and an i-phone with ios 7.0.6 currently. Since about 2 weeks ago, I now get all spam emails coming to my aple device inbox.

In other words, my outlook email account correctly identifies spam email and places it automatically into my spam inbox on outlook, but with my iphone and ipad, all the apm emails as well as my "good" emails are coming into my inboxes on my apple devices. In other words, they are not correctly synconising with my outlook inbox? They have all worked happily in tandem for a few years, but recently, they have stopped synchronising incoming email and I now get hundreds of spam email downloading onto my apple devices where as before this didn't happen. Any explanations? solutions?
Duncan

In other words, my outlook email account correctly identifies spam email and places it automatically into my spam inbox on outlook, but with my iphone and ipad, all the apm emails as well as my "good" emails are coming into my inboxes on my apple devices. In other words, they are not correctly synconising with my outlook inbox? They have all worked happily in tandem for a few years, but recently, they have stopped synchronising incoming email and I now get hundreds of spam email downloading onto my apple devices where as before this didn't happen. Any explanations? solutions?
Duncan

Keep receiving thousands of these emails?

Hi,
I keep getting thousands of these emails to my inbox everyday and I dont know how to stop them, they all look similar to this with some advert attached to it for example:- GOOG NEWS or PEREFT NEWS or AWESOME NEWS or SUPER NEWS with a dodgy link in the attachment and all the delivery email addresses I do not know, anyone know how to stop them?:-
Delivery has failed to these recipients or groups:
*********@aol.com
Your message couldn't be delivered because you weren't recognized as a valid sender. Make sure your sending address is set up correctly and try to send the message again. If the problem continues, please contact your helpdesk.
The following organization rejected your message: CO9EHSMHS024.bigfish.com.
Diagnostic information for administrators:
Generating server: btconnect.com
********@aol.com
***************.bigfish.com #550 5.1.8 Access Denied, bad sender ##
Original message headers:
Received: from AMSPR07MB440.eurprd07.prod.outlook.com (10.242.23.144) by
AM2PRD0710HT001.eurprd07.prod.outlook.com (10.255.165.36) with Microsoft SMTP
Server (TLS) id 14.16.395.1; Wed, 22 Jan 2014 21:23:29 +0000
Received: from BLUPRD0811HT002.namprd08.prod.outlook.com (157.56.232.53) by
AMSPR07MB440.eurprd07.prod.outlook.com (10.242.23.144) with Microsoft SMTP
Server (TLS) id 15.0.859.15; Wed, 22 Jan 2014 21:22:58 +0000
Date: Wed, 22 Jan 2014 15:22:54 -0600
From: Sally Mcarthur
Subject: Fwd: GOOD NEWS
To: <*********@aol.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Message-ID: <510c3b0d-92f6-4103-9257-b1850499601a@AMSPR07MB440.eurprd07.prod.outlook.com>
Return-Path: **************@btconnect.com
X-Originating-IP: [157.56.232.53]
X-ClientProxiedBy: AM3PR07CA010.eurprd07.prod.outlook.com (10.242.16.50) To
AMSPR07MB440.eurprd07.prod.outlook.com (10.242.23.144)
X-Forefront-PRVS: 00997889E7
X-Forefront-Antispam-Report: SFVPM;SFS10009001)(6009001)(199002)(189002)(2473001)(85852003)(74316001)(93516002)(83072002)(90146001)(56816005)(93136001)(86362001)(15975445006)(15202345003)(76176001)(76786001)(76796001)(76576001)(69226001)(76482001)(53806001)(54356001)(42186004)(74706001)(15395725003)(54316002)(56776001)(94316002)(50466002)(51856001)(84392001)(92726001)(23726002)(46102001)(77096001)(74876001)(81816001)(81686001)(83322001)(4396001)(87976001)(79102001)(74502001)(47446002)(74662001)(19580395003)(92566001)(47776003)(31966008)(33646001)(47736001)(63696002)(49866001)(80976001)(74366001)(558084003)(81342001)(47976001)(50986001)(87266001)(85306002)(65816001)(46406003)(59766001)(77982001)(80022001)(81542001)(66066001)(569964003)(42262001)(47743001)(11599695003);DIRUT;SFP:1501;SCL:5;SRVR:AMSPR07MB440;H:BLUPRD0811HT002.namprd08.prod.outlook.com;CLIP:157.56.232.53;FPR:;InfoNoRecordsA:0;MX:1;LANG:en;
X-OriginatorOrg: btconnect.com
Please click on pink star to the left and say thanks if I have helped you at all!. Thank you. Home Hub Page- http://bthomehub.home/
BT Speed test- http://www.speedtest.btwholesale.com/
Speedtest:-http://diagnostics.bt.com/login/?workflow=Speed
Net Connect test- http://netalyzr.icsi.berkeley.edu/index.html

Its coming from this address everytime:- Microsoft Outlook <MicrosoftExchange329e71ec88ae4615bbc36ab6ce41109e@btconnect.onmicrosoft.com>
Is there anyway I can block them coming in from outlook 2010?
Please click on pink star to the left and say thanks if I have helped you at all!. Thank you. Home Hub Page- http://bthomehub.home/
BT Speed test- http://www.speedtest.btwholesale.com/
Speedtest:-http://diagnostics.bt.com/login/?workflow=Speed
Net Connect test- http://netalyzr.icsi.berkeley.edu/index.html

Am having thousands of unsolicited emails coming into my computer

Similar Messages

Maybe you are looking for