Am i able to change the ipod user interface?

does anyone know how i can change the ipod user interfce? im getting really bored with the user interface right now. any advice or tips would be much appreciated. thx

Unless you want to put iPodLinux on it, thus ending your warranty and perhaps really messing up your iPod, you can't change the interface.

Similar Messages

This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic.

Hi there,
I was wondering whether anyone could tell me which feature in Windows 7 produces this message "This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of
the package to basic." and whether it can be turned off in Windows to prevent this message from appearing when installing certain programs that aren't WHQL certified. At first I thought it was the UAC control that generated this message but found out
that it wasn't and then thought it was the DEP control and found out that it wasn't this either. I'm only seem to be getting this message when installing FileDirector Component Service Version 3 on a few of our workstations which is an add-on that allows file
integration with Office and is part of FileDirector WinClient Version 3.
Your help would be much appreciated.
Many thanks,
RocknRollTim
P.S. I know of a way to bypass this message but would ideally not like to have the feature turned on and for the message not to be appear for non WHQL certified program installations in order to make non WHQL certified program installations in the future much
easier, more simpler and straightforward to carry out. I was redirected by a moderator off the Microsoft Community Forum.

Hi,
You can try following options to disable this prompt, but we don't recommend you to do so since this feature helps you to protect your computer.
Option 1: Run command as admin:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Restart your computer to apply changes.
Option 2: Disable in GPO:
1.Type gpedit.msc in the Run dialog and press Enter.
2.In the Group Policy Editor, navigate to User Configuration → Administrative Templates → System → Driver Installation.
3.Double-click on Code signing for device drivers in the right-side pane as shown above.
4.In the windows that opens, choose Enabled. In the Options, choose Ignore as shown. Then click on the OK button to save the settings.
Restart your computer to apply changes.
Kate Li
TechNet Community Support
Unmarked as Answer based on OP's request.
https://social.technet.microsoft.com/Forums/en-US/35ab1279-c3a1-46be-9f7d-45e8606c1410/this-advertised-application-will-not-be-installed-because-it-might-be-unsafe-contact-your?forum=w7itproappcompat
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Lego mindstorms: Is it possible to change the fixed user interface size of 1024 x 800 to smaller for use with netbooks?

I teach at a school that is using netbooks next
year - the screen size is 1024 x 576 for one model and 1024 x 600 for another model and color quality is 32 bit. To
our dismay, when we loaded Lego Mindstorms software to test it, we
discovered that the user interface is fixed at 1024 x 800, which means
the control panel at the bottom of the screen is inaccessible on the
netbooks. Is there a way to change the interface size so that we can
use the software on netbooks? This is a serious issue for us! Thanks
for any help.
I posted this question in the LabView for Lego Enthusiasts forum, but noticed that nothing new has been posted by the moderator since 2007. That's why I posted it in an active forum. Thanks.
Message Edited by mwert on 03-27-2009 11:33 AM
Melissa J. Wert
Technology Integration Specialist
Harpeth Hall School
Solved!
Go to Solution.

Hi All,
To echo Dennis Knight and as a FYI for others I refer everyone to KnowledgeBase 44DF7BQ0 How Does National Instruments Support The LEGO® MINDSTORMS® NXT Software And ...
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

Can i change the ipod username?

helo,anyone know how to change the ipod user name?please tell me coz iwanna change my user name ,thanks before

In iTunes, select the iPod then click on the iPod name.

User should not be able to change the payment terms

Dear All,
My issue is that user should not be able to change the payment terms in any of the document.I have tried to do it through authorization but it is not working out.
Mona.

Dear Mona,
This may only be done through SP_Transaction_Notification.
Thanks,
Gordon

I am not able to change the ip adress with the change of network...e.g i am using a different network in office and home bt my office inter ip adress is showing at my home network....user id are different and d ip adress is not changing

i am not able to change the ip adress as i have changed the network...my old ip adress is been shown....i cant edit it n change it

Manually input your SSID and Password
Settings>Wi-Fi>Other...>Other Network
http://i1224.photobucket.com/albums/ee374/Diavonex/d83f974f.jpg

How to Change the iPod "name"

Well friends,
I posted a msg and got an answer that my wife claims doesn't work. Short story - I am new to iPod. Never touched one before. Bought one for wife in Iraq. Loaded music and shipped it in 24 hours. Well, somewhere in the process I "changed the iPod name" to her Name and Rank - go figure, she's in the Army. Well, I am the devil and she can't figure out the name change (to her first name only). I received the following steps that she claims to have followed. Can some one please look at their pod and help me?
To change the name of the iPod, you must connect it to a computer with iTunes installed. If you have Windows, follow these instructions: Once connected, start iTunes and follow these instructions:
1. Once the iPod appears in the Playlist tree to the left, Single-click on the name of the iPod.
2. In a second or two, a text box will appear around the name.
3. Enter the new name.
4. Click anywhere else in the iTunes window.
5. The iPod will be renamed. (this may take a few seconds)
Sincerely,
Suffering Husband
aka The Devil for Naming her iPod
60 GB iPod Windows XP

You could also try selecting the iPod in iTunes (in the source pane on the left) and then click F2 on the keyboard. You should be able to rename it there.
Also, if the iPod is updating new songs an all (and blinking red in iTunes) it might now work right away. You can try again later in the updating process.
btabz

The iPod "user's iPod" cannot be synced.

Since my laptop was reimaged/rewaved, I can no longer sync iTunes with my iPod. I am using iTunes 8.1.1.10, and it does have and play all of my music, movies, podcasts, etc. from the PC. When I try to sync my iPod 160GB Classic, I receive the following message:
"The iPod "user's iPod" cannot be synced. You do not have enough access privileges for this operation."
This error message is followed by another one:
"Attempting to copy to the disk "user's IPOD" failed. You do not have enough access privileges for this operation.
iTunes could not save to your iTunes Music folder because you do not have write access. Check the permissions on your Music folder...."
I am the administrator of my laptop, and I have checked and updated permissions on all of the folders containing my iTunes music to full control, ie. includes write access. I have authorized my PC, and completely re-installed iTunes. I think that the problem is with iTunes or my PC, because I was able to sync my iPod with another iTunes on a different PC. I even tried re-creating my iTunes library and playlists, and it still will not sync to my iPod.
Can you help me, pleeeeeeeze?

I have exactly the same problem on my work PC. It started after I installed the latest version of iTunes. I tried uninstalling iTunes, deleting the itunes directory under "My Music", and reinstalling, but even that did not work.
My iPod still syncs properly on my laptop, so I'm fairly certain it's not a problem with the iPod. Would be nice if someone from Apple would comment on this issue; there are several threads with the same complaint (some going back several years) with no definitive fix.

Not able to change the password using FNDCPASS

I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
[applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
Log filename : L2741743.log
Report filename : O2741743.out
APP-FND-01630: Cannot open file L2741743.log for appending
Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
Can some one pls guide me on this

Duplicate post-
Not able to change the password using FNDCPASS
Please post only once.
Thanks,

I am not able to change the object after upgrade(SPAU Activity).

HI All,
I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
Procedure
Comsult your system administrator.
Thanks in Advance,
Mahesh Devershetty

Hi,
Does the user who would like to change the screen have the authorisation
for S_DEVELOP in his profile? Please run transaction /NSU53 after the
failed authorisation. You will get an information which authorisation
is missing.
Additional please check if you have open entries in transaction SPAU for
that object.
If you couldn´t solve the issue I need an user to analyse it in your
development system.
That user needs all authorisation for development and has to be
registrated as developer.
The system uses the authorization object S_DEVELOP for Workbench objects
can you please check your user master record whether it contains the
required autorization or not.
Please also ensure that modification adjustment is turned on as per note:
197600 Switching the Modification Assistant off and on
Aidan

How do I change the itunes user name on my iphone?

How do I change the itunes user name on my iphone? When I attempt to purchase an app or update the existing ones, the previous owner of this iphone has their information displayed and asks for the password as their user name is automatically prompted?

The apps are tied to the account from which they were purchased. If the apps were purchased from the previous owners account, then they would have to be updated from that account. you should not have these apps anyway. You need to buy your own.
Read the manual. it will tell you how to sign into your account to buy apps.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
I would suggest restoring as new.

How much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

Big thank you, KP.
I will try it out Though I did try something similar before I posted to you ... and was unsuccessful

I'm trying to sinc my ipod touch 1 gen to get movies i have got off itunes HELP ME this message keeps coming up ,"Superbad" was not copied to the iPod "User's iPod" because it cannot be played on this iPod

What does ths mean "Superbad" was not copied to the iPod "User's iPod" because it cannot be played on this iPod

Hello peace4,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
http://support.apple.com/kb/ts1497
Have a nice day,
Mario

My past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?

my past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?

You can contact iTunes support and request that they remove the $0.68 from your account here:
http://www.apple.com/support/itunes/contact/
They should respond within 24 hours.

Not able to change the the Contract Line Item Payer

Hi there,
I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
I checked the credit management assignment and the Business partner is assigned with the required Payer.
Request your help.
Thanks,
Renjith

Hi Renjith
So first of all check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
As you are getting error '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
Regards
Srinath

Am i able to change the ipod user interface?

Similar Messages

Maybe you are looking for