Am I able to install Windows 7 in Boot Camp with this HDD partition setup?

I recently upgraded from Snow Leopard to Lion, and my Boot Camp partition was obliterated beyond recognition. Fortunately I have backups, but I'm having issues re-installing Windows 7. This is what my disk looks like:
Mac OSX - Current Lion partition
Untitled - Where Boot Camp / Windows 7 used to live...
Shared - 1TB of shared data... Media/Documents/etc
This is the error I get when trying to install Windows 7 with Boot Camp Assistant...
From what I can tell, this means I won't be able to do it without wiping the Shared partition? Or is there a workaround I can use? I'd really hate to have to move all of it over to an external hard drive, since I don't have one with 750GB of free space handy...
And would this probably happen again once Mountain Lion comes out? I'll be getting that pretty much on launch, so should I hold off on messing around with this if I'll likely have to do it all again in a few weeks?
Thanks in advance to anyone who can help!
- Mark

Why don't you invest in a 1.5TB drive and case? And add to that a TimeMachine drive (and a small 40GB or even less "Emergency OS X" partition on it... a must - could even have clone of Lion and Lion Recovery on it, AND  TimeMachine partition.
If you don't have a backup, it almost always will "rain" on the parade.
If you try booting from Windows 7 DVD and aim it at the parittion, what happens? tried?
To use BCA yes it is one partition and one way only.
You could remove " - " the UNTITLED volume and then expand Mac OS volume to fill that area, or plan for and setup Lion Recovery space too.
http://support.apple.com/kb/HT4718
People have managed. Usually planning ahead up front for a setup like this.
CLONE OS X and ~ or install Lion on an external drive and create a Lion Recovery partition.
http://www.bombich.com/software/ccc.html
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html

Similar Messages

  • I made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls

    i made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls
    Re: can i install windows for pc on my mac or do i need the windows for mac? 

    There is no Lion DVD. Start Boot Camp Assistant and select the menu item to download the Windows Support Software.
    Read and follow the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Boot Camp Question .... I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp. If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"

    I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp.
    If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"... will it make my mac suseptible to viruses overall due to having a windows component? also will it make my mac slower as well

    If you are only going to use one or two window only programs then I wouldn't waste the space.  Try WinonX it allows you to install exe. Files on Mac without installing windows.

  • I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

    I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

    What DVDs are this ?
    If it is OSX Snow Leopard Installation DVD then yes this disc contains the BootCamp Drivers version 3.x and is needed after the installation of Windows to install the BootCamp Drivers.
    With OSX Lion BootCamp is at version 4.x and the BootCamp Drivers have to be downloaded during use of the BootCamp Assistant in OSX.
    Boot Camp 3.0, Mac OS X 10.6 FAQ
    Frequently asked questions about Lion and Boot Camp 4.0
    Stefan

  • Internal DVD Drive isn't working... must install Windows via Boot Camp

    My internal DVD Drive has died. Just keeps ejecting every CD or DVD I put in it.
    *The real problem is that i need to install Windows via BootCamp...*
    I've already defraged my Hard Drive and partioned it for the Windows installation
    But even using an external USB DVD Drive I couldn't get to boot up from it
    to install Windows XP SP3.
    BootCamp lets me use the windows disc that is inside my external DVD drive
    and it even restarts... but after the restart chime, and the grey screen, it doesn't
    start the windows installation... it continues to boot to my Mac partition.
    (i've tried to manually change the boot disc in System Preferences, but it was in vain)
    I also tried to use another Mac's DVD drive in Target Disk Mode... no results.
    I even tried to Copy-Paste the entire file system of a Windows installation from a BootCamp of a friend but had no success making it to work.
    *Is there any way I can install Windows with my external DVD drive?*
    Because I don't have the cash for buying a new one right now...
    And I really need windows installed via BootCamp...
    Thanks in advance,

    For this problem there no alternative > I bought a new internal DVD drive and then I was able to install Windows via Bootcamp.

  • I can not use my mouse or keyboard when I am trying to install windows via boot camp

    Please can you help!
    I can not use my mouse or keyboard when I am trying to install windows via boot camp

    Starting a couple of days ago my mouse and keyboard stopped working suddenly.  
    How are they connected?   In my case they are wireless and their receiver is plugged into my USB hub.  After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it.  My fix was to
    plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.)  Once I had normal access into my machine again I used Device Manager to remove all USB controller and
    hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going.  Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized. 
    If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK.  I have no idea why updates have such a catastrophic effect for USB devices.
    Robert Aldwinckle

  • HT4818 What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

    What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

    Go into your system preferences and click the startup disk icon then select your Mac HD. 

  • Please help! Need to re-install windows under boot camp

    Hi,
    My windows (in boot camp) is not booting but I have many software licenses on there and cannot afford to wipe windows off.
    I am hoping I can re install windows over the top of the current windows without losing my applications/licenses with boot camp but am not confident enough that a: re-installing windows wont mess up the mac osx and b: I cannot even see an option in the boot camp assistant which offer me the option.
    Has anybody esle ever had to re-install windows over an existing installation and managed to do so without losing applications etc?
    Thanks for any help on this.
    Spencer

    *In addition:*
    IMPORTANT: Make sure you select "preserve user preferences and data" when you performed the A&I?

  • Installing XP using boot camp with partitiion drive?

    I recently re-installed Leopard on my mac, and i decided to partition the drive.
    Then, when I went to install XP using boot camp it said that it only works with 1 partition!
    Is there any way round this without re-partitioning my drive?
    I also have an ext drive now so maybe I could install it there, but that would be slower.

    I just tried to run the hardware diagnostic test, half way through, the screen started to flicker so much, I had to abort the test. Please help!

  • Why can't I start Mac after installing Windows using boot camp???

    I'm new to Mac.... Have installed Windows 7 through Bootcamp... Well, I tried to at least!!  I can now only get into Windows every time I start the mac up.... What have I done wrong - and how do I fix it!?!

    Flying kiwis wrote:
    Thanks Vinmar.... I can't see anything down on the bottom fit of my screen, apart from the time, date, connectivity, speaker volume etc. am I looking in the wrong place??
    The restart in Mac OS X icon (a grey diamond) will only appear after you've installed the Boot Camp drivers. If you installed the drivers, try clicking on the sideways triangle to show any hidden system tray icons.  You can also use the boot camp control panel to restart in Mac OS X.
    For how many partitions you have, you should be able to see those in the Disk Utility application in Mac OS X or the Disk Management app in Windows.  Be careful not to delete any of them.  If you want to remove a partition, I'd use the Boot Camp Utility to do that.  Nore as well that OS X 10.7 and above add a hidden recovery partition to your drive that you won't see in Disk Utility but will see in the Windows app. 
    Hope this helps.
    Cheers,
    Vinmar

  • I can't Install windows via Boot Camp Assistant please Help!

    My superdrive damaged so i use external dvd-rw. Boot camp assistant shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution.

    Also, If you have a Mac which is a UEFI model, and not in the list as shown by the BC Info.plist file, then a direct UEFI install of Windows 8 (not Windows 7) is possible and works very well.

  • Can't Install Windows in Boot Camp - Windows Driver Issue

    Before update to Mavericks, I had an installation of WIndows 7 running in Bootcamp.  I had updated this to Windows 8.
    Just prior to Mavericks release, the hard drive in my MacBook Pro started to fail.  I had a full backup of the OS X partitiion, but did not have one of Windows.
    After the drive was replaced, I did a fresh install of Mavericks and I'm planning on doing new installs of my apps over the coming days.  (It's an opportunity to clear-out remains of old apps/OS's.)  I have hit a wall with Boot Camp, though:
    I used the Boot Camp Assistant to download the driver sets ("Windows support software")  to a USB stick and partition the HD. However, although the Mac then boots off the Windows 8 (64-bit) installer DVD I can only get as far as choosing the installation language before I get stuck on the next step where it's looking for missing drivers.  At first, I thought this was some reference to the ones downloaded from Apple, but I am now pretty certain that these just get installed after [in] Windows to allow access to the Apple hardware.
    I have tried installing Windows 7 and get hung-up at the same point (which did not happen on 10.8).
    Does anyone have any insight into what's happening and how I can get around the problem please?

    Just chiming in - having the same issue as Bernard and Ian here myself, but with Windows 7 Ultimate 64 bit.  Trying to install on MBP Late 2013, Mavericks, using USB.  I get through the bootcamp phase to the language selection in Windows and then get the drivers error message.
    Called apple tech support and they indicated that OEMs can sometimes be lightweight versions of the DVD installers (i.e. they leave out certain drivers because they assume a certain set of hardware components will be present, typically hardware that perhaps only PCs have and Macs don't) - so they suggested trying to get my hands on a retail version of the ISO file that might have all of the drivers necessary.  I tried downloading every feasible iteration of the windows trial ISOs here but every one of them gave me the same error message in Windows setup.  My next step is to call microsoft to ask them for a "complete" ISO - I'm hoping they can cooperate since I do have a valid, un-used authentication code for my Windows product.  I'll let you know if this works.
    In the meantime - has anyone found an easier fix?

  • Problem to install Windows using Boot Camp 3.0.4 in Macbook Air (2008)

    Hi Folks!
    Please I need help.
    I have a original Macbook Air of 2008 (http://support.apple.com/kb/SP8?viewlocale=pt_BR) with the Mac OS Snow Leopard 10.6.8 and I want to install the Windows 7 Professional x64 as a secondary partition using the BootCamp 3.0.4. After steps necessary for create a new partition with the BootCamp, I rebooted the machine with the "Windows 7 Professional installation DVD" in DVD device, but then the setup Windows installation does not appears, showing the initialization white screen of the Mac OS with the apple image, a symbol of emptiness and a folder with a "?" symbol within alternating infinitely and do not finish.
    I tried with the Windows Ultimate Vista x86, but occurs the same.
    Please, what can I do to install the Windows in my Macbook Air?
    Thanks a lot!
    Regards,
    Jonas Presse

    No, I did not get a solve. Actually, my problem worsened. I tried it again, but this time the computer wouldn´t detect my alu keyboard, hence I couldn´t select a drive to tell the bloody thing where to boot from. That is weird, because at the time I opened this thread it did work. I actually had to borrow a wired keyboard so I could hit alt and get it to work.
    At the moment I am not so keen on trying it again......

  • Installing Windows WITHOUT Boot Camp

    Upgraded my MB to a 250Gb HDD and now have the room to run Windows. I'd use Boot Camp, but I have the HDD partitioned in two and BC requires a single partition. Since I prefer the separate partitions, can I do the following?
    1. Backup everything
    2. Erase second partition and divide remaining space into two new partitions (resulting in 3) one of which is for Windows
    If so, how would I install Windows on the third partition? Can I just boot of the Windows CD and be very careful to install Windows on the 3rd partition?
    And yes, I have the Mac driver CD ready.
    Thanks for your help

    As it turns out, you don't. I simply backed my drive up, partitioned it into three, restored Tiger to Partition 1, my photos to partition 2 basically just a data drive) then installed Windows on partition 3. I can boot to it by holding Option on bootup and I can also run it in a VM using VMWare Fusion. Looks like Boot Camp is just a way to do it for those unfamiliar with partitioning, etc. I'm guessing decades running PC's told me it was doable. May also have given me somehow know-how that I applied without really thinking about it. Dunno.
    Bottom line: Boot Camp is NOT required to run Windows natively on a Mac. Nevertheless, I thank you both for your comments
    PS rEFIt was not necessary either

  • I've installed windows in boot camp, how do i start windows

    I've Installed windows xp prof. with boot camp and now I'm not sure how to start windows.

    A successfully install should have booted directly to windows. If not restart and hold down the option key and select the windows partition to boot from that.
    Also make sure to insert your leopard disc to install all the drivers as well as the bootcamp utility to switch from one OS to the other.

Maybe you are looking for