Am I able to Log and Transfer m2ts WITHOUT proper folder structure?

Basically what the question says... I've been trying to convert some m2ts footage for use with FCP, and have only just discovered that I could Log and Tranfer it. Unfortunately, the footage I would like to Log and Transfer no longer exists in the proper file/folder structure, just as m2ts files.
Is there still a simple way to use it in FCP via Log and Transfer, or at least without losing quality?
Thanks in advance,
Mark

You cannot use log and transfer without the folder structure. Use ClipWrap2 to transcode the media.

Similar Messages

  • Not able to Log and Transfer.

    Went to change a project this am. Was able to do it. Then started a new project, went to the log and transfer. Got the clip I wanted to import to FCE and in the status column a stop sign came up and said error. I didn't change any setting since last night, but now I cant transfer any video.
    I have all the media file on an OWC 500gb HD external.
    Is there a setting that I'm not looking at that changed?
    Thanks Brian

    No way of telling. It may be something that was changed in the camera or some change that was made to the chip. It could also be a file name issue or a project name issue.

  • I cannot log and transfer videos larger than 4 gb

    I have final cut express 4.0.1, Macbook pro intel core duo 2 ghz, 2 gb ram, Canon HF100.
    I saved my raw video onto a external drive, which is also my scratch disk. I have been able to log and transfer short videos fine. When I try to do this for longer videos, I get an exclamation point on my long and transfer window and my clip transfer is in idle.
    I have noticed that when the long videos (over 5 min) are transferring, their sizes get bigger but then max out at 4 GB.
    My audio is set to plain and I have the latest OS. I also changed my recording settings to match my playback settings = RT safe, video quality dynamic, frame rate dynamic.
    Please help.

    How is the external formatted?
    It should be Mac OS Extended.
    Most drives are pre-formatted to suit Windows FAT32, file sizes are restricted if so.
    Al

  • Can't Import Sony AVCHD Using Log and Transfer

    HI
    I have been importing AVCHD footage from all kinds of cameras, mainly Panasonics for over 4 years now using Final Cut Pro 7.  I just got a new Sony NEX-EA50 but when I try to import the footage using Log and Transfer, it does not show up.  When I try to drop the card folder into the window I get the ""PRIVATE" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media." message.
      The only way I can import the footage is using Toast, but that is a pain in the *** because it is a hassle to rename and scan the clips before I import. 
    Does anybody know whats going on?  Did Sony purposely change their file directory system so it couldn't be read by FCP? 
    Thanks in advance.

    Hi,
        What framerate did you shoot ?
    Log and Transfer will not recognise non standard frame rates such as 50 fps or 60fps. Toast, Clipwrap etc is an option but there is another. If you have the Panasonic AVCCAM importer Quicktime plug in, it will allow you to convert to Pro Res through Mpeg Streamclip or Compressor.
    DM
    Hang on, are you pointing log and transfer at the ROOT folder and not the folders inside.

  • FCP Crashes when I Try to Log and Transfer

    I just got a new iMac and installed a new copy of Final Cut Studio on it. I'm trying to transfer footage from my camera (Cannon Vixia HFM300) to Final Cut Pro via Log and Transfer. When I first tried, the thumbnails came up fine. I realized however that I had the wrong SD card, so I switched it. Now as soon as the Log and Transfer window comes up, FCP quits unexpectedly.
    I've tried disconnecting the camera and restarting the computer. Log and Transfer comes up fine when the camera's not connected. But when it is, the Log and Transfer window comes up for a second or two only, and then FCP crashes.
    I'm not sure what else to try. So any help will be much appreciated!

    So heres a status update:
    Someone suggested that I copy the files off the camera and onto the computer, then eject the camera, and try to Log and Transfer from the new folder.
    I tried that and FCP isn't crashing now, so that's an improvement. But when I try to open the folder in the L&T window, I get the following error message:
    Warning
    'Folder Name' contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Any suggestions?

  • Log and Transfer - panasonic HDC-SD5 - quits on startup - AVCHD

    Hi Guys,
    When an SDHC (4Gb) card or HDC-SD5 (via USB) is connected, and I bring up the Log and Transfer window, Final Cut Pro quits without a message. I have been struggling with the same issue with iMovie '08. Please see this thread for details:
    http://discussions.apple.com/thread.jspa?messageID=5526463&#5526463
    Configuration: FCP 6.0.1, Pro Update, QT 7.1.6. OSX 10.4.9. MacPro.
    I no longer know what to do with this issue. I've tried using Disk Utility to make an image and then mount it...same result. The SD reader is not the issue as the result is the same even if I connect the camcorder via USB. I noticed that I if I don't apply the Pro Apps Update and keep FCP at 6.0, it doesn't crash but fails to recognize the Panasonic's AVCHD structure on the SD card.
    What I did notice, however, was the manual mentioned that SD cards, whether it be 4Gb or 8Gb are formatted with FAT32 and everything below 4Gb is formated with FAT16. Perhaps this can be the root cause? Is there anybody suing a SDHC 4Gb card , formatted with the Panasonic AVCHD structure having success with FCP 6.0.1 (and or iMovie '08)???
    I also read that QuickTime 7.2 can be the issue, reformatted and installed 7.1.6, again, same result.
    Please any help would be appreciated. Thanks.

    Max Average, thanks for your reply but you suggestion does not work. I copied the contents of the SD card to a directory on my main volume, opened FCP, went to Log and Transfer, clicked the Add Folder button and then navigated to aforementioned directory -- and still FCP quits!
    The directory structure as it appears on my panasonic formatted drive is:
    DCIM
    MISC
    PRIVATE
    |_AVCHD
    |_AVCHDTN
    |_BDMV
    |_CLIPINF
    |_00000.CPI
    |_INDEX.BDM
    |_MOVIEOBJ.BDM
    |_PLAYLIST
    |_00000.MPL
    |_STREAM
    |_00000.MTS
    Is this a standard across all AVCHD manufacturers?

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • Is Premiere able to "capture" tapeless footage/P2 (log and transfer)?

    Hi! Does anyone know if Premiere Pro CS5 is able to "capture" my P2 files from my Panasonic, without a need to transfer all the raw P2 material from the card to my hard drive? So the thing is, I don't want to edit my P2 footage as they're, but to convert them to either mov, or mp4. PLUS I want to be able to trim and rename my newmade files.
    So basically I just need a log and transfer (Finalcut) kind of feature for Premiere.
    Now I'll explain you why.
    1. Let's say we had a filming where we were to shoot continuously two hours shot. So I have only one clip. About 60GB.
    2.I personally need only five seconds of those two hours.
    That should be enough reason. I hope you understood my point of view. Please don't ask me how this happened...
    Plus more reasons: In our company we need to have all the footage and materials converted as .mov, wmv or mp4  for storaging and documenting everything.
    This should be quite a simple problem but,... they always are. If there's no easy solution with Premiere, I hope you can point me a simple, easy program to do this. And working. (Otherwise we have to get some more Finalcuts, log and transfer, and then import our files in Premiere... Quite a hard way to do it)
    Thank you
    Timo Kankkunen

    @native-lovers:
    You guys didn't seem to understand that we need to have all the footage storaged as something else than P2-files. Dot.
    @shooternz:
    Hey thanks for that P2Forge link. That's quite useful. At least it's able to play the video (unlike AME). Plus that it should be able to trim the videos (though I haven't got it working yet). So maybe that'll solve my problems.
    @joshtownsend:
    Well, maybe I should give Premiere a second change, but I doupt the workflow is going to be quite a slow when having dozens of clips. Would it be something like this?
    Premiere + AME workflow:
    1. Double click the video from media browser to show it in source window
    2. space to play, i to in and o to out.
    3. drag to timeline
    4. some shortcut to export?
    5. paste filename with ending 001 and change the number when needed (I guess Premiere doesn't do it automatically does it?)
    (5.5 The first time choose the right preset and output folder.)
    6. some shortcut to export with AME (or just clicking the button)
    And back to the number one... (AME running on the background)
    Has anyone ideas to fasten this up? Like some magical way to jump over numbers 3, 4? And have the automatical numbering?
    (Sorry I don't have Premiere with me right now so this came out of my memory).
    Maybe that wouldn't be too bad after all (having all the shortcuts...).

  • Problem with Log and transfer using AVCHD

    Hello,
    I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
    I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
    I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
    I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
    I will appreciate your help!
    Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...

    OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
    So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
    Edited the entire project there...kinda sucked...
    Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
    So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
    So it working again...here I go editing on FC after I edited the entire project on Imovie...
    Thanks for all your help!

  • Working with AVCHD: Log and Transfer FAQs

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

  • A conclusion to ALL the AVCHD/.mts Log and Transfer Final Cut Pro 7 issues

    Hey all! Happy 2011!
    So this is my first post here and hopefully when this thread concludes with all your help we should be able to help a lot of people and save them the heartache that I have recently had to endure by stating these things in plain English. I have some questions at the end which I think could be answered very easily! Please, no gobbledygook!
    It would be great if people in the know can confirm/deny or comment on my points so those that are in a similar position to me can save their time and just get on with it.
    1) I have a Panasonic HDC-TM300 and it records in AVCHD/.mts files
    2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
    3) Log and Transfer _*DOES NOT WORK*_ if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
    4) What is required from the folder structure that makes FCP act this way?
    5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do! Im sure that many people have done the same thing as me please correct me if i’m wrong
    After a lot of research on the internet I have come up with the following solutions and in brackets my thoughts on them. If anyone has any experience with them please please let me and other people know so I can get on with my life and editing these files.
    a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight. (This could take a while but i think we should do it for the sake of future generations)
    b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
    c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why? (Least desirable option due to requirement for extra program so extra faffing and extra cost).
    Thanks y’all and keep up the awesome work!!
    K*

    2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
    Yes.
    3) Log and Transfer DOES NOT WORK if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
    This is true of ANY tapeless format.
    4) What is required from the folder structure that makes FCP act this way?
    This is due to the fact that most of them have files in those other folders in that structure that FCP needs to access in order to get all the proper components assembled properly. Sure, there are formats that have folders with nothing in them. Doesn't matter, FCP is designed to look at the full structure and work from that.
    5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do!
    The most natural thing in the world is to NOT backup everything? Well, that might be the case, since this comes up so darn often. But, it is wrong. The full structure must be maintained. This is true of many tapeless formats and more than just FCP. Avid and Premiere need this for certain tapeless formats too.
    a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight.
    It isn't an oversight. It is designed like this on purpose. You need to learn how to do things right. You obviously know what that is now...keep the full card structure. So now it is up to you to continue to do things properly. Instead of insisting that an NLE conform the way it works to suit your needs.
    b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
    Easy. Shoot a small bit on another card. Look at the folder structure. Recreate that structure in your backed up footage. Often this will mean making folders with exact names, even if they are empty. But if they have files in them, even small ones, then the first backup you did might not work....because those might be some of the small files FCP needs in order to do the L&T process properly. Always worth trying though.
    c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why?
    I highly recommend Clipwrap. Mainly because I haven't tried the others. But also because the author is always following the latest formats, and works hard to make sure his software works with them. It solved an importing issue I had with the Sony NXCam camera...within a week of me moaning about the issue.
    Want a tutorial to walk you through the tapeless workflow in FCP? I have one. Tapeless Workflow for FCP 7 Tutorial You might know most of this, but watch it for other tips.
    Shane

  • Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

    In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk?  With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files.  If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

    Hi jphil and Tom
    I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
    Folder structure is
    AVCHD
         BDMV
              CLIPINF
                   .CPI files
              Index.bdm
              Movieobj.bdm
              PLAYLIST
                   .MPL file
              STREAM
                   .MTS files
    AVF_INFO
         3 files (.bnp, .inp, .int)
    DCIM
         101MSDCF
              empty
         MODELCFG.IND (file)
    My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
    I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
    I downloaded the latest version of codec updates from the Apple support site but no difference.
    Thank you in advance
    Giorgio
    Freiburg, Germany

  • Log and transfer footage from Panasonic GH1 into FCE

    I have already read the few threads discussing importing AVCHD video from the Panasonic GH1 camera into FCE. I was expecting that the 1080x24 (wrapped in 60i) would import OK but the 720x60p would not. However, so far, I have had both formats import using the log and transfer just fine. These have been only short clips roughly a minute or less in length but no sign of FCE crashing when importing the 60p footage.
    So, is this considered normal or has something in the most recent OSX updates fixed this FCE capability?

    The program is usually able to ingest 24p and 60p footage fine, but upon exporting it will be conformed to the frame rate of your sequence. Since FCE doesn't support custom sequences all exported movies are either in 29.97fps or 25fps. Problems also sometimes arise where the program interprets your footage as 29.97fps instead of what it actually is, causing the audio to drift a bit as well.
    Better to stick to what the program supports: 50i/25p and 60i/30p. If you need the functionality of 24p or 60p you should upgrade to Final Cut Pro.

  • Not all files work in log and transfer

    Hoping maybe someone has found a fix to this issue...
    When editing an HDV project not all my .m2t files (all in the same folder) want to transfer using Log and Transfer.  Most of the files will transfer correctly but sometimes it skips a file and puts a red exclamation mark in the status.  Not sure why most files work and a few don't when they are all from the same folder and from the same shoot.  The files will open fine in other 3rd party apps so the files are ok.  
    Thanks in advance for any help!
    Mike

    Mike Cole1 wrote:
    Not sure why most files work and a few don't when they are all from the same folder and from the same shoot.  The files will open fine in other 3rd party apps so the files are ok.  
    FCP may be a bit more discriminating on the file structure or header integrity, dunno, never shot HDV myself but we've seen similar posts for years. Try copying the files to your drive first and then ingesting.
    Side note, ust because other apps can open the files doesn't mean they are intact or useable. You don't mention what these apps are but if you can export form them, do that and then ingest the new file which might have all of its glitches reparied to suit FCP.
    bogiesan

  • Log and Transfer issues

    I have a 2GHz Mac Book Pro with 2 GB or ram. I use this quite a lot when shooting and editing with my Panasonic P2 (HPX2000). Usually, I log and transfer DV, DVC Pro and DVC Pro 50 files with no issues. The other day, I shot a concert in 720P and when trying to log and transfer a 40 minute video, it would not finish. It would show the file transferring, but show the exclamation point at next to it, alerting me that it had problems. I was able to transfer over small chunks and edit them together in FCP, but I wonder if this is a ram issue or something like that. Any thoughts?

    #36 - One or More P2 files failed to import.
    Shane's Stock Answer #36 - "One or more clips failed to import..."
    Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
    What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
    ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
    ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.

Maybe you are looking for