Am I allowed to MOD the DVR?

In modding I do not mean hacking but this is what I would like to do if it is allowed.
Take my DVR hard drive out and copy it to a solid state drive in its place.
Possible?
I have never done this but thought about it since I am about to do it to my xbox360 for better performance.

No you are not allowed to open the box. If you break it you must pay. I don't think I would like to pay their price. You may add an external drive expansion providing you use the supported drives. To use the expansion with the eSATA port, you must have img 1.9 installed in the DVR. I have heard of success with using unsupported drives, but at that point you can not complain to Verizon. When using the eSATA port, the recordings are put on that drive first.
Term and conditions can be found at the bottom of each page of the web sites.
http://www22.verizon.com/terms/files/FiOS_TV_TOS.pdf
9. EQUIPMENT; MAINTENANCE AND OWNERSHIP OF EQUIPMENT.
(a)
We do not guarantee that the Service will work correctly if you use equipment to access the Service other than the Equipment provided by Verizon. We have no responsibility for the operation or support, maintenance or repair of any equipment, software or services that you choose to use in connection with the Service or with the Equipment provided by us. We assume no responsibility for the operation of the Service if equipment other than the Equipment we provide to you is used to access the Service.
(b)
You acknowledge and agree that at all times ownership of the Equipment shall remain with us and that this Agreement allows you to use Equipment only in connection with your receipt and use of the Service. We may, at our option, supply new or reconditioned Equipment to you. We will repair and maintain the Equipment owned by us at our expense, unless such repair or maintenance is made necessary due to misuse, abuse or intentional damage to the Equipment, in which case you will be financially responsible for the repair or replacement of the damaged Equipment. You also agree that the Equipment will not be serviced by anyone other than our employees or our designated agents or representatives. You further agree not to tamper with or otherwise harm the Equipment, and that you will not copy, modify, reverse compile or reverse engineer any Equipment, software or firmware provided by Verizon in connection with the Service. Upon termination of the Service, or if the occupancy or ownership of your Premises changes, you are responsible for returning the Equipment to us in an undamaged condition, subject only to reasonable wear and tear. Failure to return any Equipment owned by us within 30 days as instructed by Verizon, or returning Equipment in a damaged condition (subject only to reasonable wear and tear), will result in the imposition of an Equipment fee that may be substantial.
(c)
In the event that the Equipment owned by Verizon is stolen, you are required to provide us with a copy of the police report to verify that the Equipment was reported stolen. If no report is produced, then you will be held financially responsible for the stolen Equipment.

Similar Messages

  • HT5463 Why is there not an option to allow texts from the same group of allowed callers in do not disturb mode? Seems like a no-brainer!

    Why is there not an option to allow texts from the same group of allowed callers in do not disturb mode? Seems like a no-brainer!

    www.apple.com/feedback

  • When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine.  Any ideas on how to get 5.0 working?

    When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine both placed.  Any ideas on how to get 5.0 working?  I thought 5.0Ghz was supposed to have a wider range.  Do I need to change a setting on the Macbook Pro?
    Thanks, W

    I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
    The upside is that the 5 GHz signal will allow faster speeds.
    The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
    In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
    If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

  • Error : RFC Partner does not allow to start the Program.

    Hello Guys,
         I have a requirement where in  BAPI_DOCUMENT_CHECKOUTVIEW2  need to be  called from the front end (JAVA).
         When i run this BAPI in SAP it works fine ,when i run the same form front end it throws the error saying
              "RFC Partner does not allow to start the Program."( I have checked the error in debug mode).
             SAPGUI is installed at the JAVA developers desktop,still am facing this error.
            The error is thrown at the below code:
                      CALL FUNCTION 'RFC_PING'
                                                    DESTINATION 'SAPGUI'
                     EXCEPTIONS: communication_failure = 1 MESSAGE lf_msg_text
                                                  system_failure        = 2 MESSAGE lf_msg_text.
    Please suggest.
    Regards,
    Najam

    HI,
    You need a RFC path in this case.You can check SM59 and contact your basis team regarding this.

  • Issue is with OpenGL. System Info it allows Normal Mode but does not allow Advanced Mode.

    Problems with Repousse 3D feature in Photoshop CS5 Extended  
    I am trying to use the Repousse 3D feature in Photoshop CS5 Extended and have been unable to figure how I can get it to be an option using text. Can you explain how I do this, please?
    I have also tried rasterizing the text first and that does not work. I have tried placing the image and them loading the selection and I still do not have the option of Repousse.
    I believe the issue is with my OpenGL. In the System Info it allows Normal Mode but does not allow Advanced Mode. I spoke with the "Geek Squad" who advised that this is not an issue with my Mac but has something to do with the software.
    Can someone please help me fix this?  Thanks.

    If you really want help you may have to provide relevant information about your OS, GPU, its VRAM …

  • When ever I click on a page in Firefox, I get the message that Firefox has stopped the loading of that page, with an "allow" box in the upper right corner of th

    When ever i try to migrate to another page, the browser puts up a blank page with the message that Firefox stopped the loading of the page, and there is an allow button in the upper right corner of the blank page, which i have to click on, to get to the page i want to travel to.
    is this normal, and how do i fix it?

    can you try restarting Firefox in safe mode.
    [[Troubleshoot Firefox issues using Safe Mode]]
    Reply back to us.

  • Are you allowed to use the buttons underwater

    Hey so i was taking some photos underwater with my REPLACED sony xperia z3 tablet compact and pressing the volume rocker i realized some bubbles...  Only after pressing it,  i didnt make a big deal out of it since the tablet was already in the water few times for over 15 minutes without a problem. However this time was different...  After taking the tablet out of water the camera had condensation. I opened all flaps took out the sd and sim but what i see is that its bone dry and all marks are white. What my question is,  if the camera starts to condensate does it only mean that the water entered a little bit? And are you allowed to use the keys underwater because the z phones have the dedicated camera key to use underwater idk about the tablets tho.

    Oops thats the z3 forum not z3 tablet.  My mistake. If any mods see this,  please move this to the Sony Xperia z3 tablet compact forum section 

  • Mini Mac and the DVR

    Is there a cable that would allow me to connect the video/audio signal from my DVR into my MiniMac? I would like to use the Mini's DVD burner to record shows on the DVR. Thanks.

    You will need an analogue TV tuner. The EyeTV 250+ from Elgato would be a suitable one.
    See http://www.elgato.com

  • HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying.  The email will sit in my outbox and then at some point will send.  It sometimes takes days.  What is wrong with my settings?

    When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying.  The email will then sit in my outbox.  At some point it will send but it is hardly dependable.  What is wrong with my settings?

    The collum to the right listed similar problems.  The solution appears to be that under smtp outgoing settings the user name and password are listed as optional.  I have not plugged in the information and it seems to be working.  However from my office it always allowed the relaying.  The true test will be when I try to respond later from the road.
    Thank you for your help.

  • Does the DVR/STB have to be on the LAN for In-Home Agent to work?

    I'm a brand new user and am trying to learn the the new features that Fios brings to the party.  When my install was done I asked that the wireless feature be disabled on the router (I have a good wired network for my PCs and they were all connected to the supplied router).  All of my services work (TV, Ph, Internet) but I just noticed that when I go to In-Home Agent, the only selectable option is that for Internet.  I have a sneaky suspicion that the DVR/STB are controlled over the network.
    Can I connect the DVR to my wired network (Ethernet connection) and get the In-Home Agent functionality back?

    Verizon boxes communicate with the LAN via MoCA.  This is done over the coaxial cable.  If you have guide information then that is working properly.  Youy don't need wireless and the RJ-45 on the back of the STB is not active, so "hooking up" to your wired network would do no good.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    1) ensure iTunes is authorized for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
    above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
    also, there are PhoneView and iRip.

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download).  Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

    Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download).  Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.  
    This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a  developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
    If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

    Fair question
    And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
    I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
    Thanks.

  • Not to allow to save the billing document in the back date if FI period clo

    Can anybody help me please. My FI period for october is closed. But there are still some open delivery documents in billing due list for October. So now let say on 7th december if i will make the billing documents by giving the date 30.11.2007 logically as FI period is closed it will allow to save the billing document but will not pass to accounting.
    So this normaly happening in my industry endusers are creating the billing documents in the back date even after the period close so all the documents come into VFX3.
    So can any body help me? Can we have any check if the FI period is closed for a perticular months if we will try to make the billing documents in the closed period it will not allow to generate the billing document rather saving the documents and blocking for accounting.
    Reggards.
    Laxmikanta Das.
    09958119889.

    Dear laxmikanta
    I also not come across the situation what you said and hence dont have much idea about authorization group.
    However, on going through the F1 help, it says
    <b>Procedure</b>
        If only a limited set of users is to be able to post in a particular
        posting period, proceed as follows:
                 o   Add the posting period authorization (authorization object
            F_BKPF_BUP) to the authorizations of the selected users. Assign an
            authorization group (e.g. '0001').
                  o   Enter the account type '+' for the posting period variant to which
            the restriction is to apply. Enter the period(s) whose use is to be
            restricted in the first period, those which are available to all
            users in the second period, and the authorization group (e.g.
            '0001') in the last column.
    <b>Examples</b>
        A posting period can be successively restricted. If, e.g. 10 users have
        the posting period authorization with authorization group '0001', and 3
        of these 10 users also with authorization group '0002'.
        If the period is only to be accessible to the 10 selected users the
        authorization group '0001' is entered in the posting period variant.
        Access can later be restricted to the remaining 3 users by entering
        '0002'.
    From the above, I feel your requirement can be met.
    Thanks
    G. Lakshmipathi

  • A friend downloaded a disk on to my gateway windows 7 computer ....I have icloud storage and it was a dvr but it dissappeared off of the dvr, we think it may have went to icloud so we may still be able to save the information.is this true and how do Iget

    A friend downloaded a disk on my gateway touch screen computer....I am connected to facebook which is also connected to I cloud....I own a I-PHone 5 and a Ipad 2 and when they brought up the disk on the computer with wiped it clean....we dont know how because it was a dv-r and suppossedly you can not wipe them out but it did....we checked it on 3 different computers.....Here is my question I am connected to Facebook and to I-cloud storage...would it not automatically go there so I can retrieve it and the answer is I do have I-cloud set up that way...I went into look!  How would I retrieve the document from the dvr.  Thank you so much in advance

    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923

Maybe you are looking for

  • MBP keeps crashing, won't let me transfer data via wireless or hardwired to external or NAS,

    Im somewhat of a novice so bear with me, MBP late 2008 core2duo, 4gb RAM, 128gb SSD is machine specs running 10.9.1. Whenever I try and copy and paste through finder files of any size over 100mb it locks up and spin dumps via wireless, finder stops r

  • How to add a symbol to the beginning of a project?

    I have a pretty intricate Animate composition.  I want to add a simple Symbol/Animation at the beginning.  I've tried inserting time and it did nothing.  Basically, I just want to shift everything over a couple of frames.  I thought of turning the ba

  • Problem in using MultiSelect ADF table with view Object

    I have a requirement of displaying a table with multi select option. On page load table will be displayed with all columns as output text except last column as input text. User can update the last column of the selected row and only checked rows shou

  • Document Management - Folders

    I am new to Solution Manager but have taken it on in order to help my project team implement some of its components; one being Document Management. Is it possible to create your own folder stucture for DM? Right now, and I don't know if it is because

  • JAX-RPC - dynamic wsdl - non-built-in data types

    I thought my recent exp with developing a JAX-RPC client using a dynamic wsdl to communicate to a non-weblogic Web Service might help somebody out there. :-) JAX-RPC Mechanism in Weblogic for dynamic_wsdl seems to work only with built-in data types.