Am I allowed to use font in a software?

Hi,
I'm currently developing a mobile app and would like to use one of the fonts by Adobe. Once I buy the font does the licence allow me to use it in my app?
thanks!

Actually I need Mylenium Magic. I can't find any reference to my original CC registration, such as an authorization number to use if prompted. Would I download a trial on my laptop and then deal with authorization info at the end of the trial? What are the "same procedures"? Thanks in advance.

Similar Messages

08 iWeb not allowed previous used fonts

anyone figure why my imported fonts which could be used by older version, now cannot be read with new version for my blog? If this is the situation, I will revert back to older version.... any body know? no genius, procare knew why.

halsri wrote:
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
1. The postmaster address is getting a copy of the bounce emails.
2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
Regards,
Shane.

Using fonts bundled with Adobe applications

I use the Adobe CS6 Design & Premium / Middle East Version.
I have a question regarding the use of the fonts bundled with Adobe applications.
I design and sell greeting cards and printable items you can download and print at home or at a print house.
Before I send the file to a client I convert the type to a shape (Photoshop) or create outlines (Illustrator/Indesign) and sometimes I send a pdf file.
Am I allowed to use these fonts for these purposes??
Is it ok to use these fonts that way?
One more question,
How can I find out if a font is bundled with Adobe or installed with my OS? is there a list of adobe fonts that are installed with CS6?
Hope to hear from you soon
Thank you!!

it is an allowed use. But if you are sending them a pdf, you need to convert the fonts to outline nor rasterize it. Adobe allows embedding of their fonts in pdf files. However, not all font houses allow this. If you have a font that doesn’t allow embedding, the Adobe app will not embed the font.

Using fonts not copyrighted By Adobe.

Hi people,
I'm making a phonetics book with Adobe Indesign CS5 and to transcribe the phonetics I need to use Phonetic Ox font. However Phonetic Ox font is a font that Adobe doesn't have any copy rights. When making the documents, Adobe allows me to create text using the non-copyrighted font. However it warns me that when the document will be converted to PDF, the Phonetic Ox font will be missing because of copyright issues.
I bought the phonetic software about 15 years ago from Linguistics Software Inc, it is on a floppy disk!!! and as part of the price I am allowed to use their fonts in commercial ventures such as publishing.
At present I am reduced to creating the text, in Phonetic Ox font on Microsoft Word (WordArt), developing the font in Adobe Illustrator as an image and placing the final image on my Adobe Indesign document as an object.
Is there anyway that I can use the font as text, rather than as an object, and that when I finally convert my Adobe Indesign Book to a PDF format, the Phonetic OX font will appear in the PDF version?
Thanks in advance.
Gary

Thanks Peter
How do you embed a font into AID, similar to the way you embed a new font in your office system?

Is it allowed to use Adobe products for selling business

Hi All
I want to know what the meaning of Adobe General Terms in this link http://www.adobe.com/misc/terms.html at poin 8. User Conduct
at sub point 8.2
It is stated as follows
8.2 You agree not to use, or to encourage or permit others to use, the Services to:
Look at point (r)
Market any goods or services for any business purposes (including advertising and making offers to buy or sell goods or services), unless specifically allowed to do so by Adobe;
Does it mean that I can not use all Adobe products for selling business
Hope for your answer because I do not want to make any losses for related parties

Bianca Tessa,
It is: you are free to use Fonts from Adobe for such purposes.

How to revise the recently used fonts?

Hi, I been wondering if I can edit the used fonts list in iwork 09.
Thanks!

The list of recently used fonts is stored in the preferences file : com.apple.iWork.Pages.plist
You may easily edit it with a plist editor.
I use Apple's PropertyList Editor which is part of the developer tools.
If you didn't install them, you may extract it from the installation package with a tool like Pacifist but it may be easier to go to my iDisk (address below) and download
Pref Setter.app.zip
Expand it and you will get a good editor allowing to do the trick.
It's the tool which I use under Lion.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 11:36:09
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Do I need creative Cloud to use Font Folio or does it work with CS6?

Do I need creative Cloud to use Font Folio or does it work with CS6?

The Adobe Font Folio has absolutely nothing to do with the Adobe Creative Cloud offering. I think you are thinking about TypeKit which is included with the Adobe Creative cloud, integrates with the Creative Cloud applications, but also allows use of the fonts therein with other applications.
The Adobe Font Folio is a disk with pretty much the entire Adobe Type Library. You install any number of fonts on the disk onto your system and they act just like any other fonts with any applications, including the CS6 applications.
- Dov

Using fonts from illustrator in a logo

Are you free to use fonts from illustrator/photoshop in business logo's?

On behalf of Adobe Systems Incorporated ...
This (that “you can copy and send the fonts for a reproduction house for the sole purpose of reproducing that particular piece or job”) is absolutely not true! In fact it is not true for any of Adobe's fonts!
What is true is that your ability to send, share, or even embed fonts is dependent upon the EULA (End User License Agreement) for each and every font you use in your content. And, by the way, any restrictions in the EULA legally override any embedding permissions that might be set in the font itself for TrueType and OpenType fonts!
Other than for fonts that are explicitly labeled as public domain or freeware, it is exceptionally uncommon for any font foundry – and that includes Adobe and Monotype (Monotype now includes Linotype, ITC, and Bitstream) – to permit licensees to simply package and send fonts along with the base document (Illustrator .AI, InDesign .INDD, etc.) and other digital assets to a print service provider with one exception. That exception – and that exception is not universal but does apply to fonts licensed from Adobe – is that such fonts may be sent to a print service provider as long as the print service provider is also licensed for those fonts. Well, what good is that you may ask? The reason for this is that there are subtle differences between versions of fonts released over time including improvements and corrections. Adobe does allow users to make local modifications of fonts as well while maintaining actually ownership of the fonts. To deal with both these cases, Adobe does allow fonts to be sent with original source files to print service providers if and only if the print service provider also has a license for such fonts. The need for such a license is exactly why Adobe markets its Font Folio product to print service providers; it fulfills the licensing requirement for their customers sending original documents with fonts to them either for reproduction and/or editing.
One of the reasons why Adobe has been so much behind PDF workflows is that for many fonts (including all those licensed from Adobe), you may embed the fonts in the PDF files you create from you content, send the resultant PDF file to your print service provider for reproduction or to a publication for embedding in their content (such as for advertisements) and neither you nor the recipient needs to pay any further licensing fee.
However, you should note one further restriction. Some font foundries (including all the font brands of Monotype) allow for fonts to be embedded in PDF files, but except for private distribution of such PDF files (including to print service providers and publishers), requirement additional royalty payments for distribution of PDF files in which their fonts are embedded! Note that Adobe has no such restrictions on any fonts the fonts it licenses!
I know that the above information may conflict with both what many in the industry practice and believe is true, but those licenses are indeed legally enforceable. We are in fact aware of font foundries that run webbots looking for PDF files with their fonts embedded for which royalties have not been paid. The fact that many content providers and print service providers have blatantly ignored the font licenses in the past does not provide a tenable legal excuse for ignoring font licenses now.
- Dov
PS: To address the original question in this thread, you may use the fonts provided with any Adobe software in your content such as logos (even if they are created with non-Adobe software while you are licensed for the Adobe software) and you may distribute such artwork to others with the fonts as long as that is distributed in the form of either PDF files or EPS files with the fonts embedded. (Adobe most strongly recommends PDF over EPS for modern, reliable workflows!)

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

Do Apple allows the use of ''Free My Apps''?

Do Apple allows the use of ''Free My Apps''?

To have the definitive answer you must contact Apple.
Apple - How to Contact Us
As an opinion, unless they have specifically blocked it, I cannot see why not. If it is a worthwhile program is a different matter, remember, here's no such thing as a free lunch.

How to configure OraMTS to allow WCF using MSDTC access OracleDB On unix?

How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
Env:
1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
Has done the configuration:
1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
BEGIN
-- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
-- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
-- the privilege to connect
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
'Allow usage to the UTL network packages',
'ORAMTS', TRUE, 'connect');
-- Now grant privilege to resolve DNS names to the OraMTS administrative user
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
'ORAMTS', TRUE,'resolve');
-- Specify which hosts this ACL applies to, in this case we are allowing
-- access to all hosts. if one knew the list of all Windows middle-tier,
-- these could be added one by one.
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
END;
3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
4. restart Oralce;
5.Test code as follows :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using JetSun.Infrastructure;
using Microsoft.VisualStudio.TestTools.UnitTesting;
using JetSun.Infrastructure.ServiceModel;
using JetSun.DataModel.Cis;
using JetSun.TestFramework;
using System.IO;
using System.Data.EntityClient;
using System.Data.Objects;
using ConsoleApplicationTest;
using System.Transactions;
namespace Core.Tests
[TestClass]
public class EfOracleTest
public TestContext TestContext { get; set; }
[TestMethod]
public void GetEntities()
//string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
//// Initialize the EntityConnectionStringBuilder.
//EntityConnectionStringBuilder entityBuilder =
// new EntityConnectionStringBuilder();
////Set the provider name.
//entityBuilder.Provider = s.Provider.Provider;
//// Set the provider-specific connection string.
//entityBuilder.ProviderConnectionString = cn;
//// Set the Metadata location.
//entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//connectionString = entityBuilder.ToString();
////using (Entities edm = new Entities(connectionString))
//// foreach (var item in edm.ENCOUNTERs.Take(10))
//// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
//entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
try
//using (TransactionScope tx = new TransactionScope())
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
//using (var dbcn = s.Provider.CreateConnect(connectionString))
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
//edm.Connection.CheckOpen();
//using (edm.Connection.BeginTransaction())
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
item.Amount = item.Amount * -1;
edm.SaveChanges();
// using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
// edm2.Connection.CheckOpen();
// edm2.Connection.EnlistTransaction(Transaction.Current);
// foreach (var item in edm2.FeeInfos.Take(100))
// item.Amount = item.Amount * -1;
// edm2.SaveChanges();
// throw new NotImplementedException();
TestContext.WriteLine("-----------1---------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
throw new NotImplementedException();
catch (Exception ex)
TestContext.WriteLine((ex.InnerException ?? ex).Message);
TestContext.WriteLine("-------------2-------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
6. the test results are as follows:
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
4 234
无法列入分布式事务处理（Could not be included in the Distributed Transaction）
-------------2-------------
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
The main error message:无法列入分布式事务处理（Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
Is not configured incorrectly?Who can help me, thank you very much!

Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
Justin

Font in GTK2 apps are not using font smoothing in cinnamon. GTK3 does.

Hi,
My GTK2 apps like GIMP, chromium fonts are not really using font smoothing but GTK3 apps look fine.
Any help is appreciated.

Chazza wrote:Does the following application help at all? Link: http://qt-apps.org/content/show.php/Qt5 … ent=168066
Yes, unfortunately this did not fix the problem. I did put the environmental variable in .profile and relogged, the result was unfortunately the same. I've managed to fix fonts in Clementine using qtconfig-qt4 after some fiddling, but applications like Docky and Chromium still have the monospace font.
cedeel wrote:Eh, Chromium isn't a Qt application.
Ah, my bad. Do you know of a way to fix that problem anyway?

Error in COR1 - Material not allowed to use

Hi,
Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
Regards,
Suresh

Check the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
look for material master changes
Regards
Ratan
Edited by: Ratan on Jun 22, 2009 4:17 PM

Getting list of used fonts in TextFlow

Hi!
I'm wondering how i can get a list of fonts used in a TextFlow - especially usefull, when working with embedded fonts loaded
at runtime.
The idea is to be able when loading new content into textflow, to preload the used fonts before the text is shown.
Any suggestions? - looking at the API, i have not been able to come up with any solution.
Kindly regards
// Netphreak

There's no single place you get can a list of fonts, but it wouldn't be too hard to generate one. Iterate through all the leaf nodes, and get the font from the computedFormat. I'm thinking something like this would work:
function getFontList(textFlow:TextFlow)
     var leaf:FlowLeafElement = textFlow.getFirstLeaf();
     while (leaf)
          var fontFamily:String = leaf.computedFormat.fontFamily;
          // add fontFamily to list if its not already there
          leaf = leaf.getNextLeaf();
If you want to, you could check for InlineGraphicElement and ignore their fontFamily settings.
- robin

Am I allowed to use font in a software?

Similar Messages

Maybe you are looking for