Am I allowed to use Hotspots (FON etc)

Because I have an unresolved speed issue with my Home Hub 3, I am using a Thomson 585v7 router that I find is faster and more reliable than the Hub 3. As I am not putting out a local hotspot for other BT BB users to use, does this prevent me from using FON/Openzone hotspots elsewhere.
I ask this question for two reasons, firstly, I have never been able to connect to a Fon/Openzone hotspot (always get 'logon details not recogised') Secondly, does BT check to see if your (home) router is putting out a hotspot before it allows you to use the service?
I remember reading somewhere in their (BTs) guff "give a little, get a lot" so wondered if because my Thomson does not put out a hotspot then I am prevented from usieing hotspots myself.
Help and your thoughts on this matter would be much appreciated.
Solved!
Go to Solution.

out of the many millions of BT users the posts you see on the forum are very few FON/ Openzone work very well for the majority
you comment on a speed issue if you would care to post on the broadband speed and connection board community members would be pleased to help you further
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

HT204023 Can I use Hotspot to download a book to my kindle when no other wifi is available? (e.g. on a car ride, on the beach, etc.)

Can I use Hotspot to download a book to my kindle when no other wifi is available? (e.g. on a car ride, on the beach, etc.)

Thanks! I've never used it before and I wasn't sure if it is only compatible with other apple products

Using BT FON with a different home router

I currently have a BT Home Hub and have opted in to BT FON, which I have been using quite a bit when away from home.
However, I am thinking about switching to a different router at home, for unrelated reasons.
Am I correct in my interpretation that I will still be able and allowed to use FON and OpenZone hotspots when away, even though this will mean that I cannot provide one myself?
Is it likely that this will continue to be the case in the future?
Solved!
Go to Solution.

Rather than start a new thread I'll resurrect this one.
I'm a new BT Internet user and been on Infinity for 3 days. I've registered for Openzone and figured out how my HH3 transmits BTWiFi and BTWiFi with FON for other opted in users. All good stuff and working well.
A family relative has been on ADSL BT Internet for many years, originally he used an ancient desktop PC with a Voyager 205 connected via USB as his PC didn't have a working ethernet connection. After the 205 expired I gave him my old Voyager 2091, again connected via USB.
During his time with BT (Probably after changing contracts) he was sent two Home Hubs (Versions 1 & 2) whch he could not use as he didin't have a working ethernet connection.
So the Voyager 2091 expired last week, that was my last USB router. I installed a PCI ethernet adapter to his PC and used the newer Home Hub. The Home Hub connected to the internet fine (I could surf wirelessly for any period of time) but the connection between PC and HH would only last 8-10 mins after every reboot of the PC. There must have been some sort of issue between the HH and ethernet adapter as after I changed the HH for my spare Netgear there have been no more problems.
And the point of this post is to confirm that its still ok for him to sign up for BTWiFi/Openzone access even though he can't be a host as he's using a Netgear router. Would he be breaching any T&C?
Thanks

How to configure OraMTS to allow WCF using MSDTC access OracleDB On unix?

How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
Env:
1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
Has done the configuration:
1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
BEGIN
-- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
-- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
-- the privilege to connect
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
'Allow usage to the UTL network packages',
'ORAMTS', TRUE, 'connect');
-- Now grant privilege to resolve DNS names to the OraMTS administrative user
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
'ORAMTS', TRUE,'resolve');
-- Specify which hosts this ACL applies to, in this case we are allowing
-- access to all hosts. if one knew the list of all Windows middle-tier,
-- these could be added one by one.
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
END;
3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
4. restart Oralce;
5.Test code as follows :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using JetSun.Infrastructure;
using Microsoft.VisualStudio.TestTools.UnitTesting;
using JetSun.Infrastructure.ServiceModel;
using JetSun.DataModel.Cis;
using JetSun.TestFramework;
using System.IO;
using System.Data.EntityClient;
using System.Data.Objects;
using ConsoleApplicationTest;
using System.Transactions;
namespace Core.Tests
[TestClass]
public class EfOracleTest
public TestContext TestContext { get; set; }
[TestMethod]
public void GetEntities()
//string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
//// Initialize the EntityConnectionStringBuilder.
//EntityConnectionStringBuilder entityBuilder =
// new EntityConnectionStringBuilder();
////Set the provider name.
//entityBuilder.Provider = s.Provider.Provider;
//// Set the provider-specific connection string.
//entityBuilder.ProviderConnectionString = cn;
//// Set the Metadata location.
//entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//connectionString = entityBuilder.ToString();
////using (Entities edm = new Entities(connectionString))
//// foreach (var item in edm.ENCOUNTERs.Take(10))
//// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
//entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
try
//using (TransactionScope tx = new TransactionScope())
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
//using (var dbcn = s.Provider.CreateConnect(connectionString))
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
//edm.Connection.CheckOpen();
//using (edm.Connection.BeginTransaction())
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
item.Amount = item.Amount * -1;
edm.SaveChanges();
// using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
// edm2.Connection.CheckOpen();
// edm2.Connection.EnlistTransaction(Transaction.Current);
// foreach (var item in edm2.FeeInfos.Take(100))
// item.Amount = item.Amount * -1;
// edm2.SaveChanges();
// throw new NotImplementedException();
TestContext.WriteLine("-----------1---------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
throw new NotImplementedException();
catch (Exception ex)
TestContext.WriteLine((ex.InnerException ?? ex).Message);
TestContext.WriteLine("-------------2-------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
6. the test results are as follows:
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
4 234
无法列入分布式事务处理（Could not be included in the Distributed Transaction）
-------------2-------------
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
The main error message:无法列入分布式事务处理（Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
Is not configured incorrectly?Who can help me, thank you very much!

Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
Justin

Can I use hotspot tethering in iPad mini with wifi??

Can I use hotspot tethering in iPad mini with wifi??

You can use an iPhone (if your carrier supports it) as a personal hotspot for your iPad and use the phone's cellular connection to go online with your iPad - your iPad will see the phone as a wifi network.
If you are asking if you can share an internet connection from a wifi-only iPad then you can't, only cellular models potentially allow you to share its connection with other devices/computers.

Allowed domains and not allowed to use this list messages

imsimta version
Sun Java(tm) System Messaging Server 6.3-3.01 (built Jul 12 2007; 32bit)
libimta.so 6.3-3.01 (built 20:10:10, Jul 12 2007; 32bit)
SunOS mars 5.10 Generic_125100-08 sun4u sparc SUNW,Sun-Fire-V240
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?
Hal Huntley

halsri wrote:
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
1. The postmaster address is getting a copy of the bounce emails.
2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
Regards,
Shane.

Is it possible to use BT Fon on Apple TV?

I have no problem using BT Fon with iPad or IPhone. Is it possible to use it when connecting to the Internet for Apple TV.
It allows me to connect to the wireless FON but does not allow me to ask iTunes store on Apple TV and it does not let me do AirPlay or Mirrowing.
Any suggestions welcome.

If the developer has enabled for airplay then yes

Is array-referencing syntax allowable when using javascript?

Is the array-referencing syntax notation allowable when using javascript as the calculation language? My hierachy looks like the following: . form1 . Area[0] . numHeight . numWidth . numDepth . Area[1] . numHeight . numWidth . numDepth . <etc> Without getting into too many details, my need is for fields in the "Area[2]" container to access fields in the "Area[0]" container. E.g. "this.rawValue = form1.Area[0].numHeight.rawValue;". With this syntax, I received the following report: Generating PDF Document... Script failed (language is javascript; context is xfa[0].form[0].form1[0].Area[2].numHeight[0]) script=this.rawValue = form1.Area[0].numHeight.rawValue; Error: Invalid property get operation; subform doesn't have property '0' PDF generated successfully. 1 warnings/errors reported.

You can use resolveNode on basically anything, so yes you can access the record nodes within the xml data source. The function assist does not have anything when you do record but the nodes are created under record to match the nodes in your XML data source.
I am not sure of what you are trying to do with your example - if you want to return a list of nodes match some expression, then there is another version of resolveNode method which does just that called resolveNodes()
For example if you want to find all conditions_item nodes you would have:
xfa.resolveNodes("xfa.record.conditions.conditions_item[*]")
This returns a collection of Nodes and you can then use .length to see how many are returned. Make sure conditions is a child node of the root element. I am not sure, I think you do not specify the root node when accessing the record nodes.

08 iWeb not allowed previous used fonts

anyone figure why my imported fonts which could be used by older version, now cannot be read with new version for my blog? If this is the situation, I will revert back to older version.... any body know? no genius, procare knew why.

halsri wrote:
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
1. The postmaster address is getting a copy of the bounce emails.
2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
Regards,
Shane.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

Do Apple allows the use of ''Free My Apps''?

Do Apple allows the use of ''Free My Apps''?

To have the definitive answer you must contact Apple.
Apple - How to Contact Us
As an opinion, unless they have specifically blocked it, I cannot see why not. If it is a worthwhile program is a different matter, remember, here's no such thing as a free lunch.

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

Slow mobile internet (but it's faster on PC using hotspot) :/ ?

I guess I'm one of the lucky users because tethering is working on my Xray. I always use hotspot as I find it faster than tethering. And (I don't know if it's just me but) I think the connection is faster when using hotspot than tethering. And also I can't use any internet app on my phone except Opera. The Youtube, stock browser, FB, Gplay app is not loading (mobile data). But on my PC everything works fine, (connected to hotspot [mobile data]) I can watch videos on Youtube and download on internet. What could be the problem?

have you repaired your phone with either SUS or PCC?
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

Thank you very much. I changed the resolution from 2048 x 1152 to 1600 x 900, and it showed the bar with the Import, Media ... Create, Share buttons, but did not show the bar at the very top with the red, yellow and green buttons for closing, hiding and maximizing the window.
Then I noticed that Apple had an update to Mavericks available. Since I installed that, I can set the resolution back to 2048 x 1152 and still see the Import, etc. bar. I can live without the Close and Maximize buttons, but it does seem like there is a bug lurking here that either Adobe or Apple needs to fix.

Am I allowed to use Hotspots (FON etc)

Similar Messages

Maybe you are looking for