Am i allowed to use my MBP on the aeroplane?
Can i use my MBP on the plane?
Yes you can - as Kappy has mentioned - bluetooth and wireless must be turned off.
http://wiki.answers.com/Q/Can_a_laptop_be_used_on_an_airplane
Similar Messages
-
Can I use my Upgrade in the Apple store instead?
Wanted to know if I'm allowed to use my upgrade at the apple store since i was able to reserve one there?
Yes
-
I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?
Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay -
How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library
read this
https://discussions.apple.com/message/20429789#20429789 -
How can I use aperture after receiving the full adobe suite? It won't allow me to use it.
How can I use aperture after receiving the full adobe suite? It won't allow me to use it. I receive a dialogue box which states previews are not allowed in aperture and the application is shut down.
Aperture is Apples version of Lightroom. This has nothing to do with Adobe. Ask on a Apple forum. You won't find many people here using this program.
Mylenium -
I have a few questions about my New Mac, they are all over the place so i figured this would be the best spot to ask, so please just bare with me.
Frist off I read that Post yesterday about reseting the PMU, Im not going to try this but, what effects does this have on the computer/batt. After the reset do I need to callibrate the battery again, will it shorten the life? Improve the life? As well while im on the topic my mAh is about 6800 for my MBP 17 does this sound right? But I only get about 2 maybe 3 hours of life and this is just using wireless and surfing the web then stopping for a bit and coming back.
Next, I would like to copy some of MY dvds to my ipod video I have found a bunch of free software online to do so but I just dont want to go downloading anything, anyway i can check to make sure the software isnt bugged? Could i download the .dmg file to my PC scan it with norton and then copy it to the mac? On that note does anyone know if handbreak is legitimate?
As well is norton needed or can i get away without, one of the reasons why i got a mac was because i knew it was safer or under the impression i wouldnt really need anti virus and spyware protection.
Thanks,
sorry this is kinda all over the place,
Mike0. Resetting the PMU will not reset the calibration of your battery; your battery has an internal microcontroller, which is what gets calibrated. The PMU is on your computer's logic/analogue board. It probably won't hurt to recalibrate afterwards, but it is unnecessary.
1. Scanning anything for the Mac with a Windows virus scanner won't detect Macintosh viruses, obviously. In my experience, Windows-based virus scanners won't be able to read the contents of the DMG disk image.
2. HandBrake is fine; I use it myself. Just make sure you get it from the official site.
3. You don't need to get Norton or any other antivirus for OS X at this point. Maybe in the future there will be some more trojans or viruses. The virus risk is remarkably overblown (usually by the antivirus companies); Even under Windows I have only downloaded one infected file in twelve years. -
How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.
Try running Pandora in its own tab and leaving that tab open (Safari 7.1.5, OS 10.9.5). I don't have Pandora to try this, but it works for me otherwise.
Good luck
srb -
Help needed: I teach neuroanatomy and am looking for an app that would allow me to use a stylus on the iPad screen to label diagrams in wordforMac or powerpoint format. Any suggestions?
I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...
-
I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.
Apple discontinued support for PowerPC apps with Lion, I think, so you're out of luck there. No patch coming, unfortunately. Best to upgrade whatever old applications you have or, since it seems like you're using some relatively old software, scout around for replacements that give you the functionality you need.
Go to Apple menu > System Preferences > Print & Scan and select your scanner from the list--if it's not there you'll need to add it (start with the little plus icon). Once you have it in the list you can click on the Open Scanner button and a pretty barebones scanner driver will load for you. But Image Capture (as mentioned previously), found in your Applications folder, will probably do the job as adequately, or better, than your old scanner software. -
How to configure OraMTS to allow WCF using MSDTC access OracleDB On unix?
How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
Env:
1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
Has done the configuration:
1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
BEGIN
-- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
-- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
-- the privilege to connect
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
'Allow usage to the UTL network packages',
'ORAMTS', TRUE, 'connect');
-- Now grant privilege to resolve DNS names to the OraMTS administrative user
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
'ORAMTS', TRUE,'resolve');
-- Specify which hosts this ACL applies to, in this case we are allowing
-- access to all hosts. if one knew the list of all Windows middle-tier,
-- these could be added one by one.
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
END;
3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
4. restart Oralce;
5.Test code as follows :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using JetSun.Infrastructure;
using Microsoft.VisualStudio.TestTools.UnitTesting;
using JetSun.Infrastructure.ServiceModel;
using JetSun.DataModel.Cis;
using JetSun.TestFramework;
using System.IO;
using System.Data.EntityClient;
using System.Data.Objects;
using ConsoleApplicationTest;
using System.Transactions;
namespace Core.Tests
[TestClass]
public class EfOracleTest
public TestContext TestContext { get; set; }
[TestMethod]
public void GetEntities()
//string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
//// Initialize the EntityConnectionStringBuilder.
//EntityConnectionStringBuilder entityBuilder =
// new EntityConnectionStringBuilder();
////Set the provider name.
//entityBuilder.Provider = s.Provider.Provider;
//// Set the provider-specific connection string.
//entityBuilder.ProviderConnectionString = cn;
//// Set the Metadata location.
//entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//connectionString = entityBuilder.ToString();
////using (Entities edm = new Entities(connectionString))
//// foreach (var item in edm.ENCOUNTERs.Take(10))
//// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
//entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
try
//using (TransactionScope tx = new TransactionScope())
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
//using (var dbcn = s.Provider.CreateConnect(connectionString))
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
//edm.Connection.CheckOpen();
//using (edm.Connection.BeginTransaction())
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
item.Amount = item.Amount * -1;
edm.SaveChanges();
// using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
// edm2.Connection.CheckOpen();
// edm2.Connection.EnlistTransaction(Transaction.Current);
// foreach (var item in edm2.FeeInfos.Take(100))
// item.Amount = item.Amount * -1;
// edm2.SaveChanges();
// throw new NotImplementedException();
TestContext.WriteLine("-----------1---------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
throw new NotImplementedException();
catch (Exception ex)
TestContext.WriteLine((ex.InnerException ?? ex).Message);
TestContext.WriteLine("-------------2-------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
6. the test results are as follows:
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
4 234
无法列入分布式事务处理 （Could not be included in the Distributed Transaction）
-------------2-------------
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
The main error message:无法列入分布式事务处理 （Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
Is not configured incorrectly?Who can help me, thank you very much!Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
Justin -
12GB already used on out-of-the-box refurb MBP?
Hi-
Just a quick question--
My refurbished 15-inch MBP (2.2 Ghz, 120 GB hard disk) just arrived. I took it out of the box, started up and registered, and was planning to shift things from my old Powerbook G4 in Target disk mode, etc, but haven't done ANYTHING else yet. Out of curiosity I clicked on About this Mac, and saw that my HD has a capacity of 111.47 GB (I understand that "120 GB" probably means about 111 GB in reality), but that there is only 99.05 GB available, and 12.42 GB already used. Is that how much is needed for the basic Tiger (10.4.10) and applications that came preloaded on my MBP? If not, any ideas why 12.42 already used? Should I do an erase-and-install with Tiger OS? Do you think Apple didn't fully clean or erase the disk?
Thanks,
SamanthaWhen Apple says "120 GB hard drive" they mean 120 billion bytes. But strictly speaking, 1 GB is 10243 bytes, not 10003 bytes.
So when Finder says "111.47 GB capacity", it means 111.47 gigabytes, which is 111.47×10243=119.69 billion bytes. So your question is actually what happened to the missing 296 MB (or 0.31 billion bytes), and the answer is one of rounding error, disk overhead, or an extra partition on the hard drive used for booting. (The Boot camp forum has comments about an "extra" 300MB partition on the hard drive.)
Unfortunately, the misleading "x GB hard drive" label for what is really an x÷1.0243 GB drive has become an industry standard, and is always stated in the fine print. -
I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?
Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.
-
im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5.
after making the photo slide show, i clicked share>export movie. after which i burned using toast. the file became a .mov. i tried playing it in my mac and it worked. my fear now is will it also play in a regular dvd?... i read from google that mov files won't run in dvd players. what format should i convert it to so it'll play in a dvd player. can you suggest a faster way i can burn my projects for it takes me almost an hour to export. im going to make 28 slideshows for my kids in school. *=( if i need to do this process 28 times, i may not be able to finish it on time. please suggest a software or an alternative as to how i should do this... m more comfortable using imovie than iphoto. thanks and i hope to hear from someone soon *=jThank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players. thank you again for your reply *=)
-
Error in COR1 - Material not allowed to use
Hi,
Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
Regards,
SureshCheck the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
look for material master changes
Regards
Ratan
Edited by: Ratan on Jun 22, 2009 4:17 PM -
I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?
No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.
Maybe you are looking for
-
I have 40 empty folders which have appeared in my mailbox. I have tried to delete them using the edit button but they keep coming back. I have done a factory reset to start my ipad as new but this has not removed them. They have now appeared on my wi
-
Stupid question of the day: If I just drag and drop photos from either iPhoto or a camera memory card directly to a page in iWeb, does iWeb 'downsize' the photo so I'm not really posting a photo a few meg. in size? Or do I have to rescale/resize to r
-
SAFARI upgrade 3.1.1 from 1.3.1 FAILURE
SOS Dear Fellows: I upgrade my safari 1.3.1 to 3.1.1 on my verison 10.3.9 and as you know it did not work, just bounce once an thats it. I do not have my original installation software CD pack so i download the 1.3.1 upgrade to reinstall it again but
-
IPhone 4 - it begins?!? Not really ...
It took Verizon 5 years (!) to finally get the iPhone to their customers. When they rolled it out to their long-suffering customers, it was heralded as the greatest innovation ever. It's true, it is one of the best phones there is. But its been aroun
-
Error when recording measurements in IFCU
Hi when I enter fuel reading and KM reading in IFCU i get the error "You have not recorded a primary consumption" however i have eneterd a reading in for fuel . please can anyone assist. john hawkins