Am i being throttled? Why am i not getting what i ...

Hi.
I am on BT infinity.  I have the fibre modem and homehub 3.  I currently get 10mb download.  I live quite some distance from the exchange os underatand why im not getting these super fast speeds... However when i do a speedtest it flies up to 10.8mb and then stays there as if its it a wall!   When i check what BT can offer me on the "check my speed" broadband page its says i should get 15.4 download and 3.6 up, but what im actually getting is 10.82 down and 1.65up.  Is my connection being throttled as it just seems to stick at 10.8.
Why am i not getting the 15.4 advertised and what im paying for?
FYI
I feel im prerty good with PCs and home networks, i've checked my speed using a wired connecttion and its the same before anyone asks me to check. 

I think BT will cut you of Infinity at the rate your getting maty. Anything below 15000kbps is a problem. You need to get it checked out. Your predicted speeds by BT checker cannot always be accurate it just depends what the engineer gets on the install, he must of got somewhere at the time around 15000kbps else he would of cancelled the installation.
Please click on pink star to the left and say thanks if I have helped you at all!. Thank you. Home Hub Page- http://bthomehub.home/
BT Speed test- http://www.speedtest.btwholesale.com/
Speedtest:-http://diagnostics.bt.com/login/?workflow=Speed
Net Connect test- http://netalyzr.icsi.berkeley.edu/index.html

Similar Messages

  • TS3899 When my ipad is not being used I don't receive my emails until I start using my ipad then all my new emails download..  Why am I not getting my emails as they are sent to me?

    I 'm not receiving my emails as they are sent to me.  So as soon as I start using my ipad again all my new emails start to download?  So why am I not getting emails as they. Are sent to me?

    you have your email to set to manual
    change the setting in mail/contacs/cal

  • Why am I not getting the buttons of Hide/Show, Refresh, Back, Home, Options ?

    Gorgeous Hello All,
    If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    A hurdle :-
    When I File -> View -> Primary Layout : I am getting only these options of Search, Hide, Contents, Index, Glossary, Print being displayed on the screen, eventhough I have ticked for Hide/Show, Refresh, Back, Home (Home -> Advanced Properties -> Home : and declared the respective url as well) , Options  courtesy View -> Pods -> Project Set-up -> Double Click on Windows -> Double Click on NewWindow.
    Why am I not getting the buttons of Hide/Show, Refresh, Back, Home, Options when I File -> View -> Primary Layout ?
    Cheese - Vipin Nambiar

    Hey Piyush Buddy, where were you since my morning !!! :-) :-) :-)   Your simple question here made me realize where did I make the slip of my brain and now all the desired buttons are appearing on my screen. 
    I just made simple parameter changes called View -> Pods -> Single Source Layouts -> Right Click On Microsoft HTML Help -> Setted as Primary Layout (earlier my Primary Layout was setted up for Multiscreen HTML 5).
    THANKS GALORE Piyush buddy - Your simple question to me made a mammoth and galores of help to get my train on track.

  • Why can I not get the Web Icon for some of my saved Bookmarks

    Many of my saved Bookmarks have their correct Web Icons.
    However many fail to save their Web Icon leaving the Icon blank.
    The Web Sites in question do have specific Web Icons.
    I have tried deleting the Bookmarks in question and saving them again without success.
    Why can I not get these icons to be saved in the Bookmarks?

    No problem here with that TalkTalk website, the favicon image saves immediately when I save it as a bookmark. It uses a conventional favicon.ico image in the root directory <br />
    link rel="SHORTCUT ICON" href="/favicon.ico" /
    With Barcalays iBank I can't figure out where the website image in the Location bar is being loaded from.
    With Barclaycard, the favicon saves with the new bookmark, even though that image is in a non-standard location. <br/>
    link rel="shortcut icon" href="assets/images/favicon.ico" type="image/vnd.microsoft.icon"

  • HT1454 why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

  • Why can I not get a gmail account on my macmnini?

    Why can I not get a gmail account on my macmnini?
    It tells me "unable to confirm account name or password.
    But the same name and password worked on my ipad 2.

    If you have a Gmail account and you've activated 2-step verification, you need to generate a new "application-specific password" in your Google account and enter it in place of your old password in the Keychain Access application.

  • Why can i not get a preview of my emails now in the lock screen anymore

    why can i not get a preview of my emails now in the lock screen anymore

    I understand your discontent regarding the delayed availability of our reps when you call us juliusb85! We offer other customer service alternative for you like Twitter @VZWSupport and Facebook http://fb.me/Verizon or we can assist you here also. However, please keep in mind that this is a peer to peer forum and while our Social Media team monitors the posts, the best way to get immediate assistance when network issues are suspected is to call 800-922-0204 from a different line to troubleshoot device or send us a message on twitter at @VZWSupport.
      AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • Why can i not get 3G on my iphone 4

    why can i not get 3G on my iphone 4?

    What did your carrier say when you asked them?

  • In Dreamweaver CC why can i not get any workspace options? Where do I find 'Draw AP div'?

    In Dreamweaver CC why can i not get any workspace options? Where do I find 'Draw AP div' or any of my 'designer' tools?

    Insertion of APDivs/Layers are deprecated in CC. Historically, APDivs caused many, many problems for people who didn't understand they were not intended to be used as a primary layout tool.  Look at FluidGrid Layouts.
    http://blogs.adobe.com/dreamweaver/
    Nancy O.

  • Why can I not get the creative cloud to install on my MacBook Air? I keep getting an error saying I need to download a new copy

    Why can I not get the creative cloud to install on my MacBook Air? I keep getting an error saying I need to download a new copy

    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Why did i not get siri with my update to 7.0?

    why did i not get siri with my update to 7.0?

    Thanks   I thought thats the way it was but had some coworkers with a 4 and they got it with the update?

  • Why am I not getting e-mails on my mac when they come in on my iPad?

    Why am I not getting new messages on my Mac when they are coming in on my iPad?

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages

  • Why do we not get logging output for the clients?

    Q: Why do we not get logging output like #show log all | include <client mac address> for the wireless clients?
    A: When the clients connected to Bridge mode SSID, Firewall hits and logging does not work.  
    This is one of the limitations with bridge mode.  

    logical. fair. I can understand the confusion in policy  as another fine cloud service - DropBox - has a different model for increases in free storage amounts for one account = evangelism. As many policies as there are services probably.
    cya 'round o' kilted one
    CCC

  • TS1717 This article is vague and unhelpful. My iTunes needs help from a pro. I have over 120,000 songs -- NO movies, TV, radio, or books... I have other programs which efficiently run things which are not audio-based. So why can I not get iTunes working w

    This article is vague and unhelpful. My iTunes needs help from a pro.
    I have over 120,000 songs -- NO movies, TV, radio, or books...
    I have other programs which efficiently run things which are not audio-based.
    So why can I not get iTunes working well?? It now takes at least 10 secs for any operation to be completed!
    That is just plain evil. But I am sure I could do something to help.
    All the music is on an 2T external drive.

    TS1717 as noted in the thread title...
    Brigancook, is the library database on the external or just the media? iTunes reevaluates smart playlists and rewrites its database after every action on the library. I've found this can make a library half that size, with a lot of smart playlists, quite sluggish. That said I'm aware part of my problem is aging hardware. Having the database on the internal drive may improve performance if it is currently on the external.
    I'd expect to see an exponential relationship between size and response time which may explain what you see. Cutting down on the number of smart playlists might help. If we're really lucky the long awaited iTunes 11 might have streamlined some of the background processes as well as cleaning up the front end.
    tt2

  • Why can I not get my user ID to "stick" when visiting web sites that I am registered with?

    Why can I not get my user ID to "stick" when visiting web sites that I am registered with?

    Look in settings, safari.  There are two setting that might help, depending on how the website wants to see you.  If they are using cookies, make sure your accept cookies switch is on.
    Then look at the autofill setting.  You can turn names and passwords on or off.

Maybe you are looking for

  • "No tag library could be found with this URI" error while compiling jsp

    I am using WebLogic Server 9.2 MP1, JDK 1.5.0_09, Struts 1.3.5           I am pre-compiling jsp pages with wlappc ant task. However, I got following errors when a jsp page contains ant taglib:           No tag library could be found with this URI. Po

  • From Keynote to PPT (PPS)

    Good day I have Keynote '09 vr: 5.0.3 Incompatibilty keynote vs Powerpoint. Is there a theme in Keynote which is fully compatible to Powerpoint? I now have the transition time that changes from 6.00 sec to 1.5 sec in PPS. and transition format also n

  • LabView Crashing and compile server error.

    Hi, I'm having some errors when I compile code for my FPGA (PXI-7831R). I am using LabView 8.2.1. Sometimes labView crashes completely and sometimes it comes up with a compile server error. My code contains 3 VI's. The first send sends digital output

  • Calweek in Info package selection parameter

    Hi, I need to send the data from cube1 to another cube2 on weekly basis. Cube1 is getting the data on daily basis. on every week end i need to send the data to cube2 based on selection parameter OCALWEEK, and the load should be full update. i want au

  • Form routines in scripts...

    hi everybody,                can any one tell me the procedure how to use form routiens in scripts.                   thnx in advance,                         santosh.