Am I getting Gigabit transfer between WRT610N router and NMH410 Media Hub?

Shouldn't the ethernet port LED be flashing blue (gigabit connection) between these 2 connected devices? It's flashing green which, according to the router manual, suggests a 10/100 port. I'm sure I'm missing something!

If you are refering to the Manual of WRT610N about the Light status, You need to reverse the light status. As per the Linksys manual The LED lights up Green when it is connected to 10/100 port and Blue when it is connected to a gigabit port. But in real terms which you need to revers this, Green light for Gigabit and Blue light for 10/100 port.

Similar Messages

  • Wireless connection lost between my router and printer (hp officejet 4620)

    My hp officejet 4620 printer has been working fine but now the wireless connection has been lost and I can't get the wireless connection back. The blue light for the wifi flashes blue. I can't get the connection back between the router and the printer because my wifi is actually working fine with my laptop. Any suggestions about what i can do to get the connection back so I can print again?
    Is it something I need to do on the printer screen or laptop to fix the problem?

    Have you powered off everything and power up again?  Power off printer and router.  Power on router and wait 2 mins.  Power up printer and see if it connects to your SSID.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Stock transfer between Excise Plant and Non Excise Plant

    Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
    Requirement : Stock transfer between Excise Plant and Non Excise Plant
    Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
    ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
    Pls let me know the possiblity of above two in SAP and Legally?
    thanks in advance
    Sridevi

    Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
    Trading Goods say A gets imported to India. Issue was :
    1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
    2) Stock price varies every day being batch wise produced in say Singapore.
    Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
    Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
    Am I clear? If not, pls let me know,
    regards
    Sridevi

  • WRT610N router and a WET610N wireless bridge problems

    I purchased a WRT610N router and a WET610N wireless bridge and have had a major hard time to get them to work together.  The router setup went fine.  Internet works perfectly on several machines and devices.  The bridge on the other hand has been a big issue.  I keep getting "Error 105" when the wizard trys to search for the bridge on the network.  This search happens 2 or 3 times during the setup, and it has failed repeatedly at each instance.  Sometimes it lets me go a bit further, but it's never completed.  I called support, and they didn't know much about it, then we got disconnected and the second guy didn't "have the skills to work with that device" and the first guy appearantly didn't update the notes.  I exchanged the bridge, but the second has fared no better.  I'm now thinking it might be the router.  One thing that leads me to that is the connection button never seems to initiate any proceedures on the router.  I can hold that thing down for two minuets and the lights never get going.  Anyone have any experience with these?

    You have to make sure that your router is running it's latest firmware...
    Download Firmware 7.27 MB...
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    After re-configuring the router you need to configure the Bridge, to configure the Bridge you have to make sure, Wireless Settings on the Bridge and the Router are exactly identical so that they can effectively communicate with each other...Your Bridge should be assigned Static IP Address of 192.168.1.250, Subnet Mask : 255.255.255.0...Default Gateway : 192.168.1.1(Assuming your router is 192.168.1.1)...After setting up your Bridge you should unplug the Router and then the Bridge, wait for a minute and connect the router first, wait for another minute and then connect your Bridge...It should work...

  • Improving Performance between WRT610N (v1) and WET610N (v1)

    Any advice on how to improve performance of the connection between these two Wireless N devices?
    WRT610N (v1) and WET610N (v1)
    We have a PS3 connected to the WET610N via Ethernet directly, and it connects the PS3 communication wirelessly to the Internet through the WRT610N.  Just wondering if there are some known tweaks that will improve performance between them.  One thing I think is ridiculous is that the WRT610N is showing only 30% signal strength on the WET610N.  That is ridiculous as they are not far from eachother.
    Any input is welcome!

    Whats the Distance between your Router and the Bridge? Are you connected to 5GHz wireless network or 2.4GHz wireless network?  Whats the Wireless Settings you have setup on your Router.

  • Differences between rate routing and reference rate routings?

    Hello PP members:
    I would like to differences between rate routing and reference rate routings
    Thanks for your time,
    Thanks Again,
    Suren R

    Hi Mr.Suren,
    As explained by other friends Routing is used in Discrete manufacturing and Rate routing is used for REM-Repetitive manufacturing.
    In addional to these types SAP has given 2 more types
    1.Reference operation set -Used in Discrete manufacturing.
    2.Reference rate routing - Used in REM.
    If similar rate routing is been used for producing many materials,then instead of entering(these steps) in rate routing of each  material you create a refrence rate routing and you enter the work centres used and the other details.After saving you get a group counter number showing reference rate routing is saved with group XXXXXXXXX.
    When you are creating rate routing for a material say A ,after giving the name and plant details in the top you will be able to see an icon "copy from" and you can select the radio button for reference rate routing and give the group counter number. or else without giving it here you have got an option to select the reference rate routing after entering into the operation screen also.
    In that particular page in operation overview screen,there will be an icon copy,there you can click that icon and you can give the reference rate routing group counter number and very easily you can create rate routing for N number of material.
    Likewise you can use reference operation set while creating routing for a material in Discrete manufacturing.This basically reduces the time in creating routing or rate routing for materials in Discrete & REM respectively
    CA01,CA02,CA03-Create,Change,display (routing)  respectively.
    CA11,CA12,CA13-Create,Change,Display reference operation set Respectively.
    CA21,CA22,CA23-Create,Change,Display rate routing respectively.
    CA31,CA32,CA33-create,change,display reference rate routing resp.
    I hope this will help you.
    If useful reward your points.
    Thanks & regards
    Karthik.

  • Will Apple ever support Bluetooth transfer between iOS devices and android devices ?

    Will Apple ever support Bluetooth transfer between iOS devices and android devices ?

    Will the major Religions on earth ever get on together? These are questions that nobody here can help you with until or if it ever happens.
    Cheers
    Pete

  • The Question about stock transfer between HU-Management and WM-Management

    Hi,
    There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
    So, My questions are:
    1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
    2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
    Best Regards
    Boxer Du
    I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

    Hi,
    Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
    For Inbound delivery type 'HID' is maintained in this view.
    Best Regards.
    Some One want to discuss the details , can contact me. Thanks.

  • What's the difference between transport route and transport layer

    what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

    Hi,
    Transport Layer in ABAP Workbench
        The Change and Transport System supports the distribution of development
        work on large projects across multiple SAP Systems.
        The packages in each development system are grouped into one transport
        layer.
        The transport layer determines whether objects are assigned to a local
        or transportable change request.
    Use
        Each of your SAP development systems is assigned a transport layer as
        its standard transport layer. If you use Extended Transport Control, you
        can assign different standard transport layers to certain clients.
        You can define at the most one consolidation target for each SAP System
    and transport layer.
    When you create a package, it is assigned the standard transport layer
    of the SAP System.
    If you want to assign a different transport layer to a package, you
    require the administration authorization for the Change and Transport
    System.
    The objects in a package automatically have the transport attributes
    defined for the corresponding transport layer.
    o   If a consolidation route originating in their SAP System is defined,
         then the objects are assigned to a transportable request, and
         transported into the consolidation target when it is released.
    o   If a consolidation route is not defined, the objects are assigned to
         a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the
    transport attributes of the standard transport layer of the system or
    client.
    It is best to assign a package a standard transport layer for which a
    consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the
    Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
         The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
         Release 4.0A and cannot be maintained.
    Regards
    Ben

  • Diff. between transport route and transport layer

    hi gurus,
                 What is the Diff. between transport route and transport layer.
    Regds:
    BBR.

    No interview questions
    Read the "Rules of Engagement"
    regards
    Juan

  • Stock transfer between storage locations and lead time

    Hello,
    We use stock transfer orders between different storage locations. Is it possible to maintain the transport lead time between storage locations somewhere or do in need to use routes and scheduling?
    rgsd
    GAR

    Hi,
    Try using movement type 313 and 315
    313 -- Transfer posting SL to SL --- Remove from issuing SL
    315 -- Transfer posting SL to SL  -- Placing in Receiving SL
    Regards

  • File Transfer Between Mac Mini and Beige G3 OS 9?

    I'd like to transfer files between a PPC Mac Mini with 10.4.x (Bluetooth and Airport) and a Beige G3 still running OS 9 which has USB and FW ports added.
    I ccould use a USB stick and be happy, but on the Mini that makes my USB modem hang up. I'd rather not burn data CDs each time. My G3 will not run 10.x due to a video card or RAM from OWC.
    So can any of the wireless USB sticks be made to work with OS 9? More obviously, is there a solution using any sort of wire or cable - I may be able to put them near one another at some point?
    Thank you.

    You should be able to use Firewire to transfer between them I believe.

  • Data transfer between EREC 606 and HR system EHP5

    Hi All,
    we have similar scenario to the discussions:
    http://scn.sap.com/thread/3513535
    http://scn.sap.com/thread/3513421
    with that abbreviation that out system hosting partner has recommended EREC 606 as the right level. The main reason was as I recall that our SAP Portal is on the level 7.31.
    As I see in that discussions others are using EREC 605 with ERP EHP5.
    Our integration between ERP (HR) and EREC will be limited to transfer of job positions to be recruited. In our business model we have payroll outsourcer and the hired persons will be transferred from EREC via SAP PI to the outsourcer and then the outsourcer will send to us the file with new and changed employees and the SAP PI will read them into SAP HR.
    1. are we going to make right landscape? We are now just about to install EREC 606 - will it work with ERP EHP5?
    2. Second question is if we have to activate any business function in SAP HR (ERP)?
    Cheers
    Waldek

    Dear Nicole,
    thank you very much!
    I like to double-check the question no 2:
    - Indeed we have EREC 606 standalone (without ERP component)
    - the SAP ERP system (including HR) EHP5 will communicate with EREC through ALE
    Our hosting partner and application partner are now seriously considering if we need to activate on SAP ERP following BF's:
    HCM_ASR_CI_1
    HCM_MSS_ERC_CI_1
    HCM_HIRE_INT_CI_1
    Your answer means: NO - WE DO NOT NEED TO ACTIVATE THEM (?)

  • Data transfer between SAP & Java and Vice versa using IDOC Process

    Dear Experts,
            We are working on one of the good requirement related to data transfer between SAP and Java software. Client requirement is, they want to transfer the data in both the ways (from SAP --> Java and Vice versa also).
    In detail is, after sales order creation using one custom program loading plan details will be calculated. Once loading dates are confirmed then, user will release the sales document to transfer the data from SAP to Java using "Outbound IDOC processing". Similarly in that JAVA software some shipment details will be performed, once completed from JAVA software again details needs to be pumped back to SAP as "Inbound IDOC Processing".
    For this fields are already identified from external software SAP and we are looking for the same to perform the steps in SAP.
    At this stage, I need your expert opinion  / feedback how to go  about at this stage.
    Meaning,  
                     1. What are the customizing steps needs to be done in SAP..?
                     2. How to trigger the :Outbound IDOC process" once the documents are "Released" from custom transaction
                     3. How to create the link between SAP and JAVA to transfer the data between these 2 software
                     4. How to trigger the "Inbound IDOC Process" from JAVA software to SAP and how to store the data in SAP
    Experts, please give your feedback in terms of reply or by sending the step by step process to fulfill this client requirement.
    Thanks for your cooperation.
    Regards,
    Ramesh

    Maybe too many open questions in the same document.
    Maybe you should repost a more specific question in a technical forum.
    This looks like a small project where you already know what you want, maybe you should contract a technical specialist so he proceeds to the implementation!

  • Trunking between a router and a switch

    i used the topology and the configuration described on the pictures included on this post.. but the problem that the ping failed between the switch and the router

    The router config might not have been captured correctly coz it would not allow you to configure the subinterface with no vlan id after the encapsulation. But you can try this, define the native vlan 1 on the router's subtinterface for subnet 172.16.1.0/24. Also, what address of the router are you pinging from the switch?

Maybe you are looking for