Am I going to get a better end result in ProRes NTSC, than in DV NTSC??

I'm just starting to edit a 90 minute show that has been set up in DV NTSC anamorphic. If I switch over to working in ProRes NTSC anamorphic, will I get a better end result?
All ears,
Ben

Thank you for doing that Studio X, very helpful. I've been wanting to work with ProRes for the last year or so ... but haven't had the chance, mostly either HDV or DVCPRO HD (or a variation thereof).
Maybe this is the job to try it on.
I'll post a comment when I've made some tests -- to see if there is an obviously visible difference in the end result.
All the best,
Ben

Similar Messages

I got a text saying that if I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my accoun

I got a text saying that I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my service from being cut off?

As it was pointed out making prior arrangements could of helped extend the time you need to get your account back in order..
But if you have to have the phone and its the only thing you have to make calls, I would try other means ( Family, Friends, or other ) to get the rest of the balance payed and you can pay at a Corporate store using the stores Kiosk machine.! You can pay with Cash, Credit or I think with a check but using a check I'd ask the Local store how the policy is on that..
Hope that Helps.! Good luck..

TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
Have you tried quitting Pages completely and the restart the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

How can I get a better looking NTSC video showing on an Apple TV?

Filming on Mini DV tapes using a JVC GY-DV500 camcorder. Capturing via Firewire 400.
What I've been doing is capturing and editing with the DV NTSC 48 khz presets. I export "using QuickTime conversion" for Apple TV. The problem I have is that the video looks extremely pixelated when viewing it on the screen or computer. It looks like square pixels instead of non-square.
I realize that I'm blowing up a 720x480 signal onto an HD screen hooked to an HD source, but it's still a very low-quality look for that. I've tried setting the Apple TV to 480p or exporting at different qualities using different codecs.
If I try to capture with a different preset (ie. DV50 NTSC) I get the error that it had trouble reading from the source tape. (Is that because it's going through a daisy chain? The camcorder has FW400 but the Mac Pro only has a bunch of FW800.)
My thought process is that an SD television channel looks much better than this so my SD material should be equal quality. Where am I losing it? Capture? Editing? Export?

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Windows 7 on MacBookPro Lion not starting, it gets to the end of the windows logo then nothing...

I have a problem with getting Bootcamp going on my MacBookPro sometimes. It will get to the end of the winows logo start to show the bllue winows 7 pic and then nothing... I have to re-start several times with the same issue till I get the safe mode dialogue. If I then get into control panel - system and security - check for performance issues it says superfetch is not running and also asks about choosing start up programs sometimes. I can set bootcamp etc to run from the start up program dialogue to resolve that issue but it vstill brings up the super fetch issue as unresolved. Lion will start up ok but not windows. ?This issue only hapens at temporatures of 12 centigrade or lower. Any ideas?
Bootcamp 4.0
Windows 7 home premium
processor i5 - 2415M @ 2.3GHz
64 bit

you don't need or have to have superfetch
do you have an SSD?
not sure why but seems like you nailed the issue: cold temp - and disk drive is too cold or not spinning up properly
try booting from Windows DVD and perform any checks and repairs.
schedule or force it to do chkdsk on the partition next time

Iphone 3gs shows activation required, hocked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1)

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Is this really the best I'm going to get?

2 years with BT and had awful connection and speed issues, many numerous long calls to India doing first line tests, mostly being told that I would receive a call back and never do. Recently informed of an upgrade at the exchange but speeds dipped since and have not been any better since.
Been reading these forums for a while, I am plugged into master socket, the one with BT Openreach logo on, ring wire removed, connected for over 3 days, no other phones in sockets. I was always told as I am 1.6k from the exchange speeds were not to be great but next door shows as 4-6k, I'm lucky to have dial up speeds most of the time.
It appears that other people within feet of me are having decent speeds, mostly via Talk Talk I hasten to add but was told that it would make no difference as BT are the main supplier.
The quiet line check appears in order, no noises or crackles seems a little quiet but reported that online a week ago but not heard anything since.
I would be grateful and see from your experience is this really the best I'm going to get?
ADSL Line StatusConnection information
Line state:
Connected
Connection time:
3 days, 23:30:49
Downstream:
1,920 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
13.5 dB / 15.0 dB
Line attenuation (Down/Up):
55.5 dB / 31.5 dB
Output power (Down/Up):
16.8 dBm / 12.6 dBm
FEC Events (Down/Up):
468069285 / 1845
CRC Events (Down/Up):
1578613 / 1771
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
738099 / 1160
Error Seconds (Local/Remote):
0 / 0
More Details
Hide Details
To reset back to the default BT Total Broadband username and password, click the 'Reset username' button.
Reset username
Applying...
WAN StatusConnection information
Line state:
Disconnected
Connection time:
Not available
Software version V100R001C01B031SP09_L_B | Time & date 13:51 08/04/2012
Here's part of the BT speed test, still waiting................
1. Best Effort Test: -provides background information.
Download Speed
11 Kbps
0 Kbps
2 Mbps Max Achievable Speed
Download speedachieved during the test was - 11 Kbps For your connection, the acceptable range of speeds is 800 Kbps-2 Mbps. IP Profile for your line is - 1.69 Mbps
2. Upstream Test: -provides background information.
Upload Speed
370 Kbps
0 Kbps
448 Kbps Max Achievable Speed
Upload speed achieved during the test was - 370Kbps Additional Information: Upstream Rate IP profile on your line is - 448 Kbps
This test was not conclusive and further testing is required.This might be useful for your Broadband Service Provider to investigate the fault.
If you wish to carry out further tests,please click on 'Continue' button.If not, please close the window using 'Exit' button and contact your ISP for further assistance with these results.
The speed is extremely slow today, however this is nothing new as dips in and out constantly. I have left the BT Homehub 3 connected to the master socket, hopefully anyone able to assist??
Thanks
Mark

Hi you are 4km from your exchange that is your line length as you have been connected 3days + and your noise margin is high i will suggest you contact the forum mods and request a noise margin reset to the default 6db this is a link to them
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 3 working days
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

[b]desc table_name gets ORA-03113: end-of-file on communication channel[/b]

My installation running on Windows 2000 Oracle9i. When issue desc table_name i get ORA-03113: end-of-file on communication channel. I have set processes = 300 in parameter file.

The ORA-03113: end-of-file on communication channel error is a generic error. The ORA-03113 error when connecting suggests that the connection was established, but lost later, like a timeout.
There are many possible causes for the ORA-03113 error. See MetaLink Note:17613.1 "ORA-03113":
For example, ORA-3113 could be signaled for any of these scenarios:
- Server machine crashed
- Your server process was killed at O/S level
- Network problems
- Oracle internal errors / aborts on the server
- Client incorrectly handling multiple connections
- etc.. etc.. etc.. - a lot of possible causes !!
It goes on to note that the ORA-03113 End-Of-File error often has additional messages:
It is common for this error to be accompanied by other errors such as:
- ORA-1041 internal error. hostdef extension doesn't exist
- ORA-3114 not connected to ORACLE
- ORA-1012 not logged on
To find more details, check for a trace file in your USER_DUMP_DEST and BACKGROUND_DMP_DEST directory.
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

Hi
There are several layers to this Q
A. There are no HD in DVD - DVD is as standard only SD-Video what ever tools used to produce it !
iDVD or DVD-Studio Pro or Roxio Toast™ - will only make SD-Video on DVD
B. DVD can be better or worse
• Using "Share to iDVD" is no good way - Better is Share to Media Browser and as Large (NOT HD as result will be worse)
• Using iMovie'08 or 09 or 11 - are not tools to chose if highes quality is of importance - iMovie up to HD6 or FinalCut any version is far better as they send over all lines to iDVD and not only every second one.
• Using Right encoder quality depending on movie and Manu duration is very important
• Use of high quality brand of DVD - is important - I use Verbatim DVD-R
• Type of DVD - DVD-R plays on more DVD-Players (even old ones)
• Burn speed - I set it down to x4 - resulting in less burn errors - plays on more players
• I secure a minimum of 25Gb free space on Start-Up Mac OS hard disk as iDVD and Mac OS needs this and it can not be taked from other hard disks - has to be here.
• What You feed iDVD does matter
Video codecs
Audio file formats
Photo file formats
Yours Bengt W

When are we going to get a 64-bit version of Acrobat ? ? ?

I started bookmarking a PDF of an old book from 1916, and I was unable to finish due to out-of-memory errors.
Near the end, I was closing the PDF and re-opening it after each new bookmark. I finally reached a point
where I couldn’t add any more bookmarks.
That’s not all! When I later opened the document and selected a page to begin reading,
I found that after that first page, I got an out-of-memory error whenever I tried
to move to another page.
Fortunately, I have an unbookmarked backup copy of the document.
I have plenty of RAM on my computer, but the current version of Acrobat is a 32-bit program,
which I understand can access no more than 2 GB.
When are we going to get a 64-bit version of Acrobat that can handle book-size PDFs without
running out of memory?

Thanks for getting back to me Dave!
The file is about 91 MB in size, with just under 400 scanned pages.
I’ve also encountered the problem when I’ve tried to OCR one of these old books. I’ve had to do it 50-100 pages at a time, closing and re-opening the file each time.
Based on my online search for a solution, I had concluded that the 2 GB limit for 32-bit programs was the most likely source of the problem. But I’m wondering now if Acrobat could use 2 GB in processing a 91 MB file.

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year. It even shows it on the receipt i received with the phone. When will I see that reflected on my account. I have had my new phone for a week a

When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year. It even shows it on the receipt i received with the phone. When will I see that reflected on my account. I have had my new phone for a week and used tons more data than usual and am hoping that will save me this month.

concretedonkey, I'm glad you were able to take advantage of this offer when you ordered your new iPhone 6. I can certainly review your account to ensure this was added for you. Please reply to the direct message I have sent you.
AndreaS_VZW
Follow us on Twitter @VZWSupport

I just bought a iTunes card and its not accepting it. It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work. How can I expedite this process?

I just bought a iTunes card and its not accepting it. It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work. How can I expedite this process?

Has it been 24 hours?
I take it this was a gift card. iTunes Store: Invalid, Inactive, or Illegible codes http://support.apple.com/kb/TS1292 - gift cards
I don't know if this provides an alternative means: https://expresslane.apple.com ; select 'iTunes' in the first column; 'iTunes Store' in the second column
If you are really desperate you could buy the app yourself, then request reimbursement.

How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5???

How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5?? I was prefectly happy with my iPod until I got the notice to upgrade itunes to 11.1 and would you like to upgrade your iPod from IOS 6 to IOS 7. And like an idiot I took the little green pill and pushed the button. Now I can't open iTunes, some apps; like the Lindsey Sterling app, Safari and Disney don't work either (not that I care about the Disney one, but, it's part of the base setup, you'd think "IT" would work!) almost anything with video links will not open, iCloud can't find me. All I get is that annoying white screen. I'M NOT HAPPY! I could have bought a Windows machine for a lot less money and have the same problems!?! (I'll bet Mr. Jobs is spinning like a top right now!) And I have goggled-- found a few fixes: re-install, restore, etc. found one that stated to get iTunes back to go into the iPods setting by double ckicking the home button go to iTunes app and sign out, then sign in again-- those options didn't work. JEM24

If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Am I going to get a better end result in ProRes NTSC, than in DV NTSC??

Similar Messages

Maybe you are looking for