Am I missing something with the 3560X Visio Stencil?

Hi All,
Just updating my latest network diagrams and the 3560X stencil looks like it's half finished.
Compared to the old 3560 stencil I think it looks terrible.
After seeing it for the first time I thought I would be able to add in the C3KX-NM 1G and 10G Modules but I can't find them anywhere, the 48 gig ports look as though you should be able to drop something in them as well.
Has anyone else had similar problems?

Hi Martin,
We have a set of new shapes in the works for the following Catalyst products that were requested by the product group. They will be completed before the end of the year. I hope this will provide what you (and others in this thread) are looking for.
Regards
Brett:
WS-C3750V2-48PS-S Front
WS-C3560-12PC-S front
WS-C2960CG-8TC-L Front
WS-C3750V2-48PS-S Rear
WS-C3560-12PC-S rear
WS-C2960C-8TC-L Front
Cisco 1000BASE-LX/LH SFP
WS-C3560CG-8TC-S Front
WS-C2960C-8TC-S Front
Cisco 1000BASE-SX SFP
WS-C3560CG-8PC-S Front
WS-C2960C-8PC-L Front
Cisco 1000BASE-ZX SFP
WS-C3560CPD-8PT-S Front
WS-C2960C-12PC-L Front
C3KX-NM-1G
WS-C3560C-8PC-S Front
WS-C3560CG-8PC-S Rear
C3KX-NM-10G
WS-C3560C-12PC-S Front
WS-C2960CPD-8PT-L Rear
C3KX-NM-10GT
WS-C2960CPD-8TT-L Front
WS-C3560CG-8TC-S Rear
C3KX-SM-10G
WS-C2960CPD-8PT-L Front

Similar Messages

Missing something with concat

Am I missing something with the concat method under the String class?
I have something like this..
String testStr = "I am here";
testStr.concat(" but not here");
System.out.println(testStr);It compiles fine but all I get is "I am here"
Any ideas?

Thank you for pointing that out. I did read the
javadoc, unfortunately I didn't understand exactly
what I was reading. That was in no way obvious from your first post though.
That's why I asked the question.
Have any of you ever had to ask a question. If so was
it over experimental material that you couldn't read
or research about on your own? There is a difference between the act of asking a question and the actual nature of the question itself.
Some people ask
questions, thus the forum. Furthermore, to all of you
who do spend time on here answering questions I offer
sincere gratitude. You help development to be less
aggravating. It's unfortunate that you have to deal
with anyone that doesn't try to come up with the
answer themselves and thus assume they don't try to
figure it out on their own. I would ask for some
slack, and maybe occasionally give the benefit of the
doubt that someone was just not getting something.
But many people don't try to figure it out themselves.
And those people will ask the question in exactly the same way as one who did try alternatives but didn't bother to indicate that the alternatives were tried.
So how are we supposed to figure out what the poster has done?
And without my post how would anyone here even known that you knew what the javadocs were?

TS5150 With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound. I am missing one or more sound tracks. Am I missing something in the settings for Apple TV?

With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound. I am missing one or more sound tracks. Am I missing something in the settings for Apple TV?

Are you using a stereo receiver or surround sound system for the audio by chance. What you are describing sounds like a receiver that is not setup correctly, or does not have the speakers connected to it correctly to support Dolby surround, 5.1 or 7.1. Which is why it is only happening on some content. It would only be on the ones that are encoded to support Dolby audio.

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (being PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Did I miss something in the fine print? I installed Lion and and come to find out, I can no longer open any Word documents or Excel spreadsheets as they are no longer supported (apparently because they are PowerPC apps). Seriously?!?!?!?!! What are my alternatives?

Hi Mary and Matthew
You might find it helpful to "try before you buy" - there is a 30 day free trial offer for Office for Mac 2011, accessible from M's .com website.
You may be able to use this period to open and resave your old documents in a format that enables you to switch instead to using Apple's iWorks apps moving forward.
I initially intended to do something similar, but ended up buying Office as it provided an easier way (for me, at least) to continue working with years worth of old emails, letters, spreadsheets and other documents (from my PC days) without risking damage to their integrity, formatting, etc.

Garage Band isn't reading my entire iTunes Library, am I missing something in the settings? how do I make entire library available?

Garage Band isn't reading my entire iTunes Library, am I missing something in the settings? how do I make entire library available?

In general, whatever you see in your iTunes app (playlists, songs, etc) should also be displayed in GarageBand when you select the Audio tab in the Media Browser.
One hidden feature is that you can have multiple iTunes Libraries (as you can have multiple iPhoto Libraries).
When you click on the iTunes icon in the Dock and immediately after the click hold down the option key, the following window will pop up.
It lets you create a new empty Library or choose to open a different existing Library (that you have created before). Whatever Library you chose the last time you opened iTunes will be the "current" iTunes Library and that is the one that is displayed in GarageBand. (it is a system wide preference). You even can have GarageBand open while switching to a different iTunes Libraries and GarageBand will update the displayed Media Browser content.
Here are two screenshots of my GarageBand app displaying two different iTunes Libraries
So in case you used that feature, you might see a different iTunes content than you expected.
(BTW, this "multiple Libraries" feature comes in also very handy with iPhoto, where you can have separate Libraries for you family, your band, your business, or whatever you want to separate photos. Also good for individual backups)
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

So I recently removed my partition so I can repartition but its telling me to do something with the disk utility I don't understand what I'm suppose to do?

So I recently removed my partition so I can repartition but its telling me to do something with the disk utility I don't understand what I'm suppose to do?

GCapinpin wrote:
So I recently removed my partition so I can repartition but its telling me to do something with the disk utility I don't understand what I'm suppose to do?
Unless you tell us what it is telling you we can't help.

HT2463 Since I installed my new d6300 netgear my downloads on Apple TV have taken a lot longer than previously using a billion router. Do I need to do something with the net gear set up?

Since I installed my new d6300 netgear my downloads on Apple TV have taken a lot longer than previously using a billion router. Do I need to do something with the net gear set up?

Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

When you set airdrop to ÓFF', blutooth is not switched off?. Can anyone help me.Am I missing something in the setup?

when you set airdrop to ÓFF', blutooth is not switched off?. Can anyone help me.Am I missing something in the setup?

What exactly are you trying to do?
Turn off Bluetooth?
Swipe up from the bottom of your screen and tap the bluetooth icon (White is on, Back is off)
or
Settings > Bluetooth > Bluetooth - Off

Whenever I try to erace something with the delete button it acts like "tab" and sends me all over the page when all I want to do is erace what I wrote... help!

Whenever I try to erace something with the delete button it acts like "tab" and sends me all over the page when all I want to do is erace what I wrote...How do I fix this?

Whenever I try to erace something with the delete button it acts like "tab" and sends me all over the page when all I want to do is erace what I wrote...How do I fix this?

How to do something with the moved file ???

I bet it is easy, but as I am new to AppleScript, still need help..
This is a folder action. When a new file is added to the folder, the folder action script runs, and if the file name contains a particular text, then the file is moved to another folder - in this case, it is moved to a folder on an external hard drive. It is described in this script:
copy name of thisItem as string to FileName
if FileName contains "House" then
move thisItem to POSIX file "/Volumes/ALL/House/Season 5/"
The problem is - in that folder (/Volumes/ALL/House/Season 5/) I also have set a folder action, that, for example, converts or opens every file added to folder. The things is that, it is rather slow to run 2 folder actions and I don't know why it is so, but I guess it is because of the external hard drive. My aim is to remove the folder action for the folder (/Volumes/ALL/House/Season 5/), and do everything in the initial folder action.
So the question is - How can I operate with (for example, convert or open the newly added file) the file added in the folder (/Volumes/ALL/House/Season 5/) via the first folder action script?
Or in other words, how do I use the newly added file? I tried to do it like this:
copy name of thisItem as string to FileName
if FileName contains "House" then
move thisItem to POSIX file "/Volumes/ALL/House/Season 5/"
open thisItem
But obviously, it opens the original thisItem! So how can I do something with the newly added file in the location /Volumes/ALL/House/Season 5/ ???
Cheers and sorry for my english!
Message was edited by: reinisb

But obviously, it opens the original thisItem! So how can I do something with the newly added file in the location /Volumes/ALL/House/Season 5/ ???
That's easy - you know the file name and you know the directory you copied the file to, so instead of:
open thisItem
you just:
open POSIX file "/Volumes/ALL/House/Season\ 5/" & FileName

Everything on my 4gs works fine, but the ringtone suddenly is silent on in calls. has been ok until recently. All settings "look" ok. Am I missing something in the settings?

Everything on my 4gs works fine, but the ringtone suddenly is silent on in calls. Has been ok until recently. All settings "look" ok. Am I missing something in the settings?

Mute switch top left side?

Everything on my screen, Mac Pro, shrunk! Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to defaule

Everything on my screen, Mac Pro, shrunk! Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to default. The font is tiny, tiny. My operationg system is Mavericks.

Thank you for the list, I will print and keep it handy.
Contol F3 makes my whole screen larager or smaller.
Command option 8 does nothing that I can see.
Command option + or - will zoom in or out on the page I am on but if I change windows it reverts.
But bookmarks pane, the task bar, the password sign in and even the post I am writing (actually every printed word), are a font so small I almsost need a magnifiying glass. This includes web pages too!
I am using Mavericks.
Trying to retrace my steps when this happened. Nothing unusual, I was using airplay to watch a You Tube segment on the tv. I don't think that is related.
I really appreciate your help and comments on this. I can usualy google and find and answer, but to no avail with this one!

For the love of Jeebus, please tell me I am missing something with PP's janky audio workflow

OK, I've read the help docs, gone through the tutorials, watched the videos. Still I am not finding an efficient workflow for dealing with audio in PP. Let's face it, audio in 5.5 was completely baffling to us newbies jumping ship from FCP 7, and I thought the CS 6 update was going to simplify things. No dice. As I am a somewhat recent transplant, I am willing to admit that…. wait, nay, I'm HOPING that I am probably missing something here and that it's just stupid operator error. Fingers crossed.
Here's my situation. I am editing a documentary that has hundreds of hours of footage and thousands upon thousands of clips. We are working with three different kinds of audio: stereo, mono 1 & 2 (interviews with a lav mic on channel 1 and boom on channel 2) and mono (interview on channel 1 with lav microphone only). Here's my problems:
If I set the audio so that they're all stereo clips
Then I'm running into problems with the mono 1 & 2 tracks. Say the boom audio is better on the right channel, and I want to silence the left. I turn the left channel off. Then I want the boom audio to be on both channel's equally… well, I can't figure out a way to do that. In FCP, I would just put the pan to center, and the audio would play the right channel's audio on both channels equally. With PP, panning does nothing but adjust how much of the boom is heard, as opposed to how much the lav (now silent) is heard. I can't find a way to pan the boom to the center, so that it is heard equally on both channels.
If I set the audio so that they're all mono 1 & 2 clips
Doing this solves the boom/lav problem as listed above, as the mono tracks seem to center pan and play on both channels equally, so simply deleting the lav works well. However, now if I have a stereo song that I want to keyframe some fades in (say a music bed playing in the background that I want to fade lower when a person starts talking)… now I have to pen tool in keyframes for the left track AND the right track separately, try to get the fades to match on each track, then separately fade the audio back in for each track. So essentially I've DOUBLED my work for each of the tracks I've marked this way.
As a note, I love having found this out the hard way, after editing a 20 minutes interview into bits and pieces scattered across my timeline, and then finding out I should have set the audio to Mono 1 & 2. Easy enough, I thought, as I went back to the Project window, found the original clip, then went to modify the audio so it would work in my project. I got the extremely helpful message that "Any changes you have made to the number of clips or the type of those clips will not be reflected in the existing timelines. Do you want to continue?" YEAH! That's super. You might as well have put "Making this change now will do nothing to help you. You'll have to go back and edit everything again. Do you want to continue?" Great, Adobe, thanks. Bang up job there.
I was really happy about not having to transcode in PP like I used to have to do in FCP 7. That was until I realized how the audio worked, and for the latest scene of this documentary had to go through every clip/camera download to figure out how the audio had to be set-up before I could start editing. Transcoding a big job used to take me a day. Configuring the audio in PP for this one scene took two.
I would be the happiest person on the planet to find out that I've been wasting my time and that there is a simple solution for all of this. Hope someone can point me in the right direction and thanks for any help!

I'm not suggesting any of this as a model, and your needs are different than mine.
1) Go to Preferences -> Audio. Under "Default Audio Tracks", Set "Mono Media: Mono". Set "Stereo Media: Mono" (Choices from the pull-down for both are Use File, Mono, Stereo, 5.1, Adaptive)
You can change these, but I don't. I am using both mono and stereo tracks. I set up a custom sequence with the particular combination of stereo and mono tracks I want.
2) Set audio for clips by selecting all clips and going to Modify Clip -> Audio Channels Tab. Under "Number of Audio Tracks" there should be a "1". Under Channel Format it should read "Stereo".
I am not sending the audio to anyone else to edit further. I am doing a final stereo mix. If camera one is set up to record 2 mikes as a stereo track, then I leave that unchanged and put it onto a stereo track. If camera two is set up to record one mike onto channel 1 as ambient sound and channel 2 is a mono feed from a sound board, then I modify those clips as Preset Mono, 2 audio tracks, Channel format Mono, and that puts the left source channel (or whichever I choose) onto Audio track 1, channel 1 (of one), and right source channel onto audio track 2, channel 1.
4) Delete all the existing audio tracks in the sequence and replace them all with mono tracks, so all tracks in the sequence are mono.
I modify the tracks while creating the sequence, and ultimately use a custom sequence.
Under my Effects Controls panel there is only Channel Volume, and nowhere to adjust the pan.
I'm using the mixer, not the effects control panel.

Am I missing something with upgrades?

I got your recent newsletter with the "speedometer", which showed I was using an older/slower version of Firefox -- plus there was that annoying black pop-up. I went ahead and upgraded as per instructions. Everything seemed to work fine. But when I went back to check, the "speedometer" showed I was still using the older/slower Firefox and the pop-up popped up again. So I upgraded a second time. Again everything went smoothly. But when I went back to the "speedometer" it showed I was still using the same older/slower Firefox. Am I missing something?

Hey --
Thanks for getting back to me so quickly on this. Turns out I had downloaded but not installed. Clicked on download, wizard appeared, installation a breeze after that.
And, of course, the new Firefox is nice and fast. (I also double-checked speedometer and it's really in.)
Thanks again, all the best in 2012, more to come as things develop --
Bruce King

Am I missing something with the 3560X Visio Stencil?

Similar Messages

Maybe you are looking for