Am i not using Cal the right way or is the application just not great?

I don't find the layout very convenient and clear.
All i see is a dot marking a daily event....
It is hard for me to quickly see which day has or not an event planned?
Anyway to have the days with event looking different than the ones w/o an event: Bold, color,...

xavier Pilsudski,
Are you refering to the Calendar application on your iPhone, or iCal on your computer?
On your computer you can color code events by putting them in different calendars. For example on my work iMac I have home as Blue, Work as Red. In addition I have an iPhone calendar in iCal which is green that all events created on the iPhone go to. Then I can sort them to the appropriate calendar in iCal.
Hope this helps,
Nathan C.

Similar Messages

When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have ... Pease advise ..

Greetings,
I hope this email finds you well. I bought my iPhone on December 1st, 2012 with a track order W459517623. When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have, as per this link:
http://www.apple.com/iphone/LTE/
Model A1429
(GSM model)
Saudi Arabia - Mobily
The model Apple sent is A1428
I believe that such service should be provided to my devices too. Also, Apple always find best ways to solve such queries.
Please advise me
Thank you and Regards,
Abdulrahman

I'm assuming you bought it via the Apple Online store. Contact them. Use the Contact Us link at the bottom of the page. Did you buy the phone from the store in the country you intend to USE the iPhone? If you bought the phone in the US store and intend to use it OUTSIDE the US, you only have yourself to blame, as they shipped the CORRECT phone for use in the US.

How to remove the Sessions used in the application

Hai Techies,,,
i am using many number of sessions in my application, for example i am using 5 sessions in reports module
my application is a web based application
if can't remove the sessions it contains the huge amount of data , my application is going into mess, and the application performance will be decreased..
Can anybody tell the solution for this Problem
How to remove the Sessions used in the application
Hoping a reply
Thanks & Regards
Krishna mangamuri

Hai Gita,
i am not able to do the session invalidate method bcoz, i am mainatainting the session from login along with the current userid who is login into the system and putting some of the data in session....
thats session is to be valid upto when i click on logoff link
except that i have to remove the sessions in my application
while navigating from one jsp to another i have to remove the sessions, bit somes times that sessions may be used somewhere
Can u Understand My problem
session remove method may also helpful to me but some times it will casue some prob to me
Is there any other Way to remove the sessions in the Application ????
Thanks & Regards
Krishna Mangamuri

App sub-window has locked the use of the Applications.

I cannot access my Applications on my iPad because an app window is open and has locked the use of the Applications. How can I unlock this?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
Every voice helps

Installing issues-the application just closes

I dowloaded and unzipped the files fine but now if I try to run set-up the install bar pops up and fills up, then the application just closes. I've doe this twice just to be sure I didn't do anything wrong.

Check the Task Manager or Activity Monitor , close any instance of PDApp.exe already running and then try installing again.
Regards
Pragya

Using Gimpshop - the application gimp-2.2 quit unexpectedly

Hi there,
When I try to open the gimp.app program, first a window pops up that says "caching fonts" and another window with a header 'xterm' comes up and in the xterm window it says "bash-3.2$".
After a minute or so, the "the application gimp-2.2 quit unexpectedly" message appears.
X11 seems to be running when all this happens although I don't know what X11 is or does.
Hope someone can help

I had the exact same problem with gimpshop and os 10.5.7
I just downloaded the latest version today for the first time. any suggestions?

Having major problem with deployed installer needing DLLs that I don't seem to use in the application

I'm a bit confounded on the library situations...I'm not using an RT target...
though
when running the deployed executable/installer.... upon start it asks
for these 2 dlls: lvuste.dll & lvalarms.dll. which seem to be related to RT ???? how do I get
around this? How would I include these dlls within an executable or installer?
I'm using 8.5.

It looks like this was a problem with the way Timed loops link directly to those 2 DLLs. Does the error ask for those DLLs in a specific folder? If so you can copy them from their current location (which I believe should be <labview>\resource folder) to the folder that it wants them to be in. Alternately you can simply remove the timed loops, since timed loops on a Windows PC doesn't really have much benefit over a while loop with a timer.
Hope this helps...
David_L | Certified LabVIEW Architect
LabVIEW Tools Network | LabVIEW Tools Network Developer Center

I have iPhoto 11. Every time I load it, the application just spins out to the point where I have to force quit it. Any advice?

Up until now, iPhoto 11 has been working perfectly. I've been loving it. Now, I'm faced with a huge problem. A few days ago, I tried to load it, but the little beachball appeared and wouldn't go away. I've tried repairing my disk drive and everything, with no success. Anybody with similar problems?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

What's the right way to move "all but boot drive"?

I'm setting up a new Mac Pro with a four-drive RAID-10 set, using an Areca 1680LP RAID controller. Areca doesn't yet have 64-bit EFI support, so I'll need to continue booting off the internal drive for now.
What can - and what can't - I move, and what's the best way to mount it? I know that Leopard now uses autofs, but I've also seen posts suggesting that it doesn't always "just work".
Most posts on the topic seem to be about moving the home directory, or mounting network drives. I want to keep everything on the RAID drives, except for what's actually required for EFI to load the kernel.
OS X doesn't have a separate /boot partition, so: what goes where?

Sophie:
Welcome to the Apple Discussions. You're only hope to recover the library as it once was is to: 1 - if you have a backup copy of your iPhoto Library or 2 - you can put everything back exactly the way it was in the Finder.
Otherwise you'll have to start over with a new library and import the Originals folder from your current library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

What's the right way to move folders into a new library ?

I'm going to transfer my photos from PC to iMac using USB flash drive. I organized all the folders with files on the PC's desktop, some by year, others by themes.
I'll transfer folder by folder.
With each transfer I'll go to iPhoto and will create a NEW Library and then "import" this folder ?
Is that a correct procedure ?
If not, please what are the steps ?
Here is from Apple's support page, and it's confusing:
Do not copy or move pictures directly into the iPhoto Library folder as they will not appear as an option in iPhoto when attempting to import.<<<<</div>
What does it mean ?
FROM APPLE:
=======
Notes on importing from other sources
========================
Each imported item, whether a single photo or an entire disk will appear as a separate film roll. Command-clicking on multiple items during an import will result in them all appearing on the same film roll.
If importing files from a local hard drive, see technical document 61015: "iPhoto: About Importing Pictures From Hard Disk and Available Space"
Processed photos that are offered for download from an Internet site must first be downloaded to a local drive before they can be imported into iPhoto.
Do not copy or move pictures directly into the iPhoto Library folder as they will not appear as an option in iPhoto when attempting to import.<</div>
Thank you very much!

Sophie:
Welcome to the Apple Discussions. You're only hope to recover the library as it once was is to: 1 - if you have a backup copy of your iPhoto Library or 2 - you can put everything back exactly the way it was in the Finder.
Otherwise you'll have to start over with a new library and import the Originals folder from your current library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

What is the easiest way to open an application from Labview?

I need to open an application from labview and depending on a user's selection, load one out of a group of files for the application that is opened. I need to know what is the best or easiest way to open an application and load a file that is used by the application based on a selection.

Here is the response that I got from Cognex when I asked them about how to do this. Do you understand what they are talking about?
In order to do something like this you will probably want to look into the Display Control/SDK for In-Sight. The Display Control gets installed along with In-Sight Explorer and includes a control that can be used in an environment like Labview to communicate with In-Sight sensors while the SDK is an enhanced version of the Display Control that gives you more control and functionality. I am not very familiar with the Labview environment so I will give some code snippets in VB.Net and hopefully you can adjust them as necessary. Specifically I see 3 possible avenues to do this:
1) Using the Display Control you have access to many of the dialog boxes that are used in In-Sight Explorer including the Load Job dialog box. You can spawn this dialog box through a line of code similar to cvsInSightDisplay1.Edit.OpenJob.Execute(). I am not certain if the Labview environment will be able to spawn and display this dialog though. 2) With the addition of the SDK (additional purchase) you can directly access sensor properties including the job. There is a method called LoadJobFile to load jobs from on the sensor and LoadJobFileLocally to load jobs from the host machine. A typical line of code might be cvsInSightDisplay1.InSight.File.LoadJobFile("myjob1.job").3) If Labview cannot handle the dialogs and the SDK is not an option for you then you may still be able to do this using Native Mode commands. Native Mode commands are sent through a socket on the telnet port (typically port 23). Keep in mind that you will need to handle the username/password prompt and response when you first open the socket before issuing any Native Mode commands. The command to load a job file from the sensor would be the Load File command which would be a string similar to "LF myjob1.job". The Native Mode commands are documented in the In-Sight Explorer help file.

Getting the tables actively used in the schema

Hello,
We are in need of releasing space from the schema we use.
Can anyone please suggest how to find the tables that has not been used for a given amount of time. So that we can drop the tables which are not effectively used by the application..
Thanks and Regards.
Sathiya

user13299583 wrote:
Thanks for the replies ..
Actually the application was designed/created long back .. Lots of changes has been incorporated and lots of features has been removed from the application..
But in the backend the associated tables were not removed and we feel that it occupies huge space in the server ..
I am afraid i can enable auditing as it is a production instance and lots of formalities are involved if we have restart the server ..
Is there any other way to find out the tables which has not been touched, for a period of time ..
The project has been switched over to many people so there are no proper documentation available .. So we are forced to find some alternatives to identify the unused tables ..
Thanks,
Sathiya.What about using triggers and logging?

How to deallocate memory used by the labview program?

Hi,
I have bulit a large application in labview 2012 that uses a couple of subvis, local and global variables, some uninitialized shift registers (functional global variables) and some c++ and .net dlls as well. When I open my application the memory usage shown at Windows task manager is around 1.4GB. After running the application and enabling all processes used in the application, the memory usage goes up to 1.55GB but when i stop the application, memory is never released/deallocated until i close the application plus exit labview. Can you suggest how to deallocate this memory? and how can i use the request deallocation function for this application? labview help says i have to place it inside a subVI for which i want to deallocate memory. But i have a lot of subVIs used in my application. I tried placing it in the top level VI and called it after stopping all processes but it didn't work... I am also closing references to all of the .net dlls at the end. Any workarounds??
Thanks

sandee wrote:
When I open my application the memory usage shown at Windows task manager is around 1.4GB. After running the application and enabling all processes used in the application, the memory usage goes up to 1.55GB but when i stop the application, memory is never released/deallocated until i close the application plus exit labview.
You already got some good advice. One thing that was not clear was how you are measuring memory. Since the task manager is capable of showing the memory used by LabVIEW alone (you simply need to look elsewhere), and you said that the memory gets released when you exit LabVIEW, you gave the impression that the 1.4GB was the LabVIEW portion.
OK, so a couple of hundred MB used by LabVIEW is really nothing to worry about. Are you running into memory or other performance problems? What are the symptoms?
sandee wrote:
I have bulit a large application in labview 2012 that uses a couple of subvis, local and global variables, some uninitialized shift registers (functional global variables) and some c++ and .net dlls as well.
We really need to see some code. It is very well posssible that you have a lots of unecessary data copies in memory due to sloppy programming. How big are the data structures? Do you use local variables for big data structures? What does the program actually do?
LabVIEW Champion . Do more with less code and in less time .

I ADDED A CAMERA USING wpS THAT SCREWED UP MY WIFI. i RISTALLED AND NOW MY LAPTOP IS GETTING THE NET, BUT MY IPAD ISN'T ACCEPTING THE PASSWORD--THE SAME AS i USED FOR THE LAPTOP.

I added a dlink camera and used WPS to do that. It apparently disabled my regular wifi. I reloaded the disk for my dlink router and now my laptop is getting a signal, but my ipad won't accept the [passwrd-the same one I used for the laptop.

Just double check that reloading the disk for the router did not restore it to factore settings and reset the password to the factory default password.
Try settings/general/reset/reset network settings and try again to connect with the ipad

Am i not using Cal the right way or is the application just not great?

Similar Messages

Maybe you are looking for